Razor blade tool not cutting audio and video at the same time

Hiya,
When using the razor blade tool in a timeline, my razor only cuts the video track, or one audio track at a time. The audio and video were imported together.
I would like for the video and two audio tracks to be cut at the same time--so that when I'm cutting I don't have to click three times (VA1A2).
What needs changed to do this? Thank you!!!!
A little annoying -- but would be a time saver. Never had this problem before FCS2.
Thanks again!

Are the video and audio clips linked? If they're not, the cut will only apply to the track under the blade tool.
-DH

Similar Messages

Recording Audio and Midi at the same time in Logic 7 Express Can it be done

I am wondering if I can record audio and midi at the same time in Logic 7 Express. I am running my guitar thrugh a Roland GR 33, and a line out and using the GR 33 to trigger sounds in the Logic's synth section but cant seem to record all three tracks at once. If any one knows how let me know. Oh and I am running the GR Synth and Guitar into the Prosonus Fire Fox and have the GR 33 out midi to the Fire Box as well. So I guss the question is how do I sent up two audo tracks and one midi track to record in real time. Thanks Victor

I am wondering if I can record audio and midi at the
same time in Logic 7 Express. I am running my guitar
thrugh a Roland GR 33, and a line out and using the
GR 33 to trigger sounds in the Logic's synth section
but cant seem to record all three tracks at once. If
any one knows how let me know. Oh and I am running
the GR Synth and Guitar into the Prosonus Fire Fox
and have the GR 33 out midi to the Fire Box as well.
So I guss the question is how do I sent up two audo
tracks and one midi track to record in real time.
Thanks Victor
Try arming the audio tracks, select one of the tracks, then while holding down the shift key, select the midi track you want to record, arming the "r" on the midi track. Press "record".....
HL

Recording audio and midi at the same time ??

Is it possible to record audio and midi at the same time in logic?? It doesnt seem to work for me, im assuming there must be unchecked box somewhere that I need to check. thanks,
Dan

Daniel,
You should be able to accomplish this by hitting record on the audio track, and then while holding the "Shift" key down, hitting record on the MIDI track (or visa versa).

Can i take both Receveing of audio and video on the same window.

hi,
i m using AVTransmit2 and AVReceive2 for Transmission and Receiving all is doing well but problem is that AVReceive2 show Transmission of audio and video in both different windows and it use different players for audio and video. Can u tell me can i merge both audio and video at the receiving end. i m already mergeing audio and video at transmission end ???. any one tell me how can i solve this problem ???
thx in advance.

Hi,
I have the same situation - to use one window to show both rtp audio and video stream, but use the ControlPanelComponent of audio player to control both players.
I want to use the audio player as the master player so that the video player could be synchronized with it. So: audioPlayer.addController(videoPlayer).
In the only window frame for both players, I want to show the VisualComponent(VC) of video and the ControlPanelComponent(CC) of audio. So I add both components respectly to the window frame, after I got them from each player. Because the streams are coming from the network over RTP, and they do not become realized at the same time, I add the VC and CC of first realized player(no matter it is audio or video) to window frame at first, and then change them to the desired video VC and audio audio CC.
Though I check both player are realized and not started before I call the addController() method, the application stucked in this method. Of course I call it in a try block but no exception was thrown out.
when I use TimeBase to synchronize them, i.e., videoPlayer.setTimeBase(audioPlayer.getTimeBase()), everything goes fine. But, I can not control both players from one ControlPanelComponent in this way.
Anybody having any idea to solve this problem please reply.
By the way, in the example code such as AVReceiver, where audo and video streams are shown on two window seperately, user can use the ControlPanelComponent of audio to control both player, though it seems no relevant code to support that function. The ControlPanelComponent of video can not control the audio player anyway. Anyone having any explanation to this?

Audio and Video on the same page.

Is it ok to have a separate audio and video file on the same page? Both are set to auto play with no controls but when I try this set up the audio seams to override the video, stopping the video a few seconds later.
I guess I could try and embed the audio into the video but if I did not have to I was not going to.
Any suggestions or help is appreciated.
Thanks,
Ryan.

You can't play both the audio and the video simultaneously, you'll need to merge them.
Neil

FCP Audio and firewire at the same time?

Hi, I was pondering an idea that made me wonder this. I hope it is not a stupid one but I am sure I get an "E" for effort or a "god bless his little heart".
I will be moving my mac to a studio to work on a instructional DVD. I will be capturing from one main camera real time via firewire, I have the option of going out of the console via optical for the instrument tracks and vocal. ( whether I can only have one active audio inputed track or two doesn't matter but would like two).
This audio will be pro quality and I just want to use FCP.
I am only interested in the video without the camera audio.
I want to capture the camera video(firewire) and studio(optical) audio at the same time.
If not it's no big deal I can route audio to the 3.5mm audio mike input on the camera.
I am running FCP studio and have no budget and a chance to play. I am on a barter project. I was just hoping for a time saver and down the road I would be happy to know my limitations as I may move into the studio and "sync" up.
I have another camera that I will add later for my Picture in picture effects.

Hey X thanks for your reply
Well I talked to my friend at the studio. and we are still saving the audio on digital hard drive in case this doesn't work. ( Which I know is the right way). I only asked the question because I apparently am lazy and want to spend as little time trying to sinc up later. My solution was to be fluid. In the end the project would be available for download tutorials/lessons from his web page, which will be a whole other delivery question as I am working through the third party whose project this belongs. Given my information I am trying to cover a lot of possibles to create something better than he is asking ( A Pro Job )
I was hoping to cross from "hobbiest" to "entry pro" here. Most I get to play with are relatives videos and stills. I have two completed two paying jobs in which I have purchased the mac and Final Cut Studio.
This is more of a controlled environment and wanted to utilize as many choices as possible.
The camera I am using (Panasonic PV-DV951-K) doesn't record to tape properly or doesn't replay what was recorded on tape. My solution was to go directly to FCP via firewire as a live realtime capture.
I opted for this as having no choice and in the end. Given the amount of lessons that would have to be captured and the equipment I have conjured up I think it is my best solution.
Again I thank you X and I meant no disrespect as to who is clueless. I am the one asking the questions. I don't always ask questions until I have searched the forum for an answer and appreciate those of you who take the time to answer "patiently".
Also I am an electronic technician and in a pinch devour troubleshooting to the point of magiverism.
When this is all over and I am enjoying a pint and reaping what few dollars this creates, I'd like to buy you all a beer. Then I'll plan the next hairbrain project.

Playing Music and Video at the same time

I would like to play a song from my music collection and while it's playing, play a video that has no audio on it from the video collection. When I try to do this, one shuts the other off. I switched the behavior from default to showcase, still no luck. Is there perhaps an app available on the appstore that anybody knows of that can play an audio on loop and a video on loop at the same time?

i found a fix for WoW
Open the World of Warcraft folder on your hard drive (Default Folder: C:\Program Files\World of Warcraft).
- Open the *** folder.
- Open the Config.*** file using a text editor, like WordPad.
Add the following line to the list if it doesn't exist:
SET SoundOutputSystem "x"
Set "x" to be 1 first, if it still occurs bump it to 2 and so on up to 4.
you must restart WoW everytime you change the number.
heres the link in the WoW forums.
http://forums.worldofwarcraft.com/thread.html?topicId=28083078&sid=1

Recording vocals and guitar at the same time, using the Alesis IO dock!

Hi there!
I have an Ipad 2 with the newest OS installed etc. And I rea the other posts in here.
I bought an IO dock from Alesis the other day and was full of exspectations, but I got a bit disappointed -> Garageband! When I bought the Ipad dock I exspected that I would be able to record (or just play and hear the inputsound from two devices) at the same time in my headphones! But I wasn't... Now I'm wondering if this is going to be fixed in an update or not? I think it would be a shame if this issue isnt adressed, due to the huge abilities the Ipad/garageband/Ipad docks withhold.
So anyone know anything? I went to my musicstore and spent about an hour or so with the tech dude there trying dfferent setups, but unfortunatly without luck! Just to clarify that I didt just plugged in my guitar and got mad that it wasnt apple intuative!
Hope someone can help :)

I am wondering if I can record audio and midi at the
same time in Logic 7 Express. I am running my guitar
thrugh a Roland GR 33, and a line out and using the
GR 33 to trigger sounds in the Logic's synth section
but cant seem to record all three tracks at once. If
any one knows how let me know. Oh and I am running
the GR Synth and Guitar into the Prosonus Fire Fox
and have the GR 33 out midi to the Fire Box as well.
So I guss the question is how do I sent up two audo
tracks and one midi track to record in real time.
Thanks Victor
Try arming the audio tracks, select one of the tracks, then while holding down the shift key, select the midi track you want to record, arming the "r" on the midi track. Press "record".....
HL

Multiclips and multiple audio tracks playing at the same time

I've only just taken delivery of my first ever mac (only ever used PC) with FCP, and I'm loving it already! Done lots of reading and viewing of video etc etc, and it's not as daunting as I thought it might be. I have one question the books don't seem to answer, and I can only find one reference to this on this site, with no definitive response. FCP5 probably doesn't work this way, but just in case someone knows different......
I film and edit motorsport (karting) programmes for television in the UK, using multiple cameras. I usually lay all the video and audio tracks on the timeline, (synched) lock the audio for each (as it is engine noise, and I want it playing without abrupt changes at cuts as each kart passes each camera, whether in shot or not) then cut the video tracks and delete those video segments not required.
The most exciting aspect of FCP5 for me is the multiclip editing facility, which I have found very easy to learn and is going to save me hours of work! However, I want to know if there is a way of having each audio track from each camera used in the multiclip laid down on the timeline when you import the multiclip to the timeline from the viewer, in order that I can play each audio track from each of the cameras at the same time.
I know how to cut from angle to angle, leaving the audio from the selected angle as the one audio track playing, but I want all of the tracks to appear in the timeline and play at the same time. I know there's a bit of a workaround by locking the video and importing each audio track from each clip independently, but if you do have to re-synch one of the multiclips, this means the audio is not then synched with the original clip, which will have had an in point set before being imported in as part of a multiclip.
I can understand why you might want to keep audio from one camera only playing over the whole multiclip, or to switch between audio from each, but in my case I prefer all audio to play at the same time. The workaround is still do-able for me as I'm only talking about engine notes, which if they are a few frames out is not very noticeable at all, but I would like to know if I'm right in thinking I cannot do it the way I would like to?
Wish I'd used FCP from the start, but glad I've got it now.....especially with the 30 inch screen! It's 4.40am, been going over 19 hours straight and I'm still making comments like...."WOW, that's brilliant"...every half hour!
G5 Mac OS X (10.4.3) Quad, 8gb ram, 2 x G-Media GRaid 500gb Raids, 30 + 20 inch Cinema screens

...

Problem with audio of my notebook. Audio works through pc speakers and earphones at the same time

Hi all,
thanks in advance for your advices.
I have a problem with my notebook (HP pavilion g6 2305 sl).
The problem is that when I connect my earphones the audio of my pc don't stop, hence I can hear (music, film, ...) both by earphones and speakers at the same time.
I tried to install again the latest driver audio, but nothing was changed.
I tried to use another pair of earphones, but nothing.
I have noted that if I connect the Jack at my pc, but not until the end, the audio stops from the speakers and goes through the earphones, but only if the jack is not completly inserted in the notebook.
I read a lot of forum on the web but I'm not able to find a solution for my problem.
(ps. the problem comes out suddenly, without any signal. I don't have installed any update or new software before the problem's start)

Right click on speaker icon, lower right screen.
Choose playback devices.
Select "speakers and headphones" as your default.
Disable "communications headphones".

Can I watch video through my iPhone and TV at the same time?

Can I watch video through my iPhone and TV at the same time while using the Apple composite video cables? I am planning a trip in my car and would like to play videos for my kids through their video screen while my wife watches on the iphone from the passenger seat. I didn't want to spend $50 to find out it doesn't work.
Thanks in advance!

It doesn't work that way, sorry. When video out is being utilized, only the movie artwork (the cover or image) is displayed, and the actual movie is not displayed on the iPhone's screen.

Is it possible to output to div monitor and s-video at the same time?

I'm editing video and want to see the broadcast results on the fly (ie monitor and tv side by side, same image onscreen). Is it possible to output to div monitor and s-video at the same time? Maybe thru a splitter cable. I'm concerned about resolution issues.

This is not possible with a mini.

When im facetiming with someone and im watching a youtube video at the same time, the volume for the youtube video is lowered and the facetime volume stays the same, how can i change that?

When im facetiming with someone and im watching a youtube video at the same time, the volume for the youtube video is lowered and the facetime volume stays the same, how can i change that?

Have you ever even used skype on an iphone or ipod? We tried it and there is no way to type to each other while you are video chatting. You can do the typing during the video on a COMPUTER, but not on an iphone or ipod.

My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

OK great info!
I found 2 possible ethernet to USB adapters:
By "Plugable": USB 2.0 to ethernet LAN wired network adapter - seems this will work, but I'll contact Plugable.
2. Apple USB Ethernet Adapter
Easily connect your MacBook Air computer to an Ethernet network with the Apple USB Ethernet Adapter. Small and light, it connects to the USB 2.0 port of your MacBook Air and provides an RJ-45 connector that supports 10/100BASE-T performance. BUT NOT SURE IF THIS WILL WORK ON ANYTHING BUT a MacBook Air…
One person commented:
This little gem used to be the device of choice for adding a second Ethernet interface to a Mac Mini Server and I'd been using one that way for about a year. After doing a software update to 10.6.6 it stopped working. Forewarned is forearmed – it appears that Apple is finally enforcing the MacBook Air system requirement.
Thanks for any additional comments.
Best regards,
Steve Schulte
Sunday 6 January 2013

How can I share my screen and video at the same ti...

As the title says, I want to share my Mac screen and my face cam (video) at the same time. I looked this up before and I found out that you need a premium account in order to do this...but then I found out that the premium account is no longer available. So, is it still possible?

bump again...please respond! thank you

Razor blade tool not cutting audio and video at the same time

Similar Messages

Maybe you are looking for