Razr HD SD card not mounting after update to JB 4.1.2

My Razr HD which i just got in March no longer recognizes the SD card installed. I have tried removing and reinserting and when the phone boots it sees the disk for all of about 2 minutes then it gives error stating that the card was removed or unmounted. Even though it wasn't. I didnt have a problem with it until the 4.1.2 Update was pushed to my phone. Anyone else having the same issue and is there a fix out there?

Lets get your device to recognize your SD card Stephen-H! Try the steps below and test out.
1) Insert the SIM removal tool into the hole to unlock the SIM card tray, then slide the SIM card tray out of the device.
2) Insert the microSD memory card into the left card slot with the gold contacts facing down. Gently push until it clicks.
Tip: Use the SIM Tray removal tool to push the SD Card all the way into the slot, and to eject the SD Card when you need to remove it.
Note: If your SD Card doesn't click in, position the Card Insertion/Removal Tool on the edge of the card, and gently push until it clicks.
Please keep us posted if the issue persists.
Thank you,
LenaA_VZW
Follow us on Twitter @VZWSupport

Similar Messages

Lacie drive not mounting after updating to 10.4.8

Hi,
I have a 160gb Lacie d2 external hd, and after updating my OS to 10.4.8 in October, it will not mount. It's recognized in Disk Utility, but will not mount. I've tried repairing disk permissions from both my current OS and from the installer DVD, but it isn't helping and I keep getting the same message.
When I first updated to 10.4.8 in October, my computer had problems re-starting (it would get stuck at the blue boot-up screen), so I had to turn it off by holding the power button. Ever since then, the lacie drive won't mount.
Is there anything else I can do? I've thought about trying Disk Warrior, but if possible I'd like to save the $100 to buy it!
Any advice? I would really appreciate it.

What I think.
The major changes occurred in the 10.4 original Tiger release. Due to the nature of what I believe the problem is 10.4.7 would just be changing how, where and when the issue(s) become most noticeable to you and not solve it. It will leave you hangin' somewhere else. This I/O API does effect everything. I only wanted to finish a movie with iMovie and set some clips at 00:05 f as I have done forever. Bought a new MacBook Pro specifically for OS X.4 and iMovie and all that was over. iMovie as well as many other Universal apps are IMO mostly non functional except at the OS and QT interface. All other Universal apps and devices cause it to choke and sputter as things pass through this very same I/O API that is causing the external HD issues. As for the PB G4, I was believing the age of the machine to be causing these failures then I had noticed many others developing the same issues on newer G4 machines. Most puzzling was the performance hit on the machines with the proper HW especially larger Core Image supported graphics cards as 10.4 has made this a very relevant piece of HW now. The more I read about the how's and why's of the changes in the architecture of the OS in the Developer Connection the more I realized that many issues that seem so unrelated are indeed caused by the same area and or error in this API. iTunes, Safari, iMovie, iPhoto, -.. CPU's, Fans, HD's, jpegs choking G5's and intels-.. plug n play's that worked yesterday not today, same machines/HW new OS.
Photoshop CS and, an extremely resource greedy, 3D Modeling/database application running in Rosetta works fine. Animating 3D graphics on the fly without so much as a stutter everything calm and quiet. Open Safari and the comp gets too hot to handle the fans are screaming just displaying basic window graphics here at the Apple Discussion boards. Most times this is a text only forum for me as the MPB can't even process the window graphics, often the original posts push-pin graphic is the only one that will display.
AFAICT Rosetta is just an application with no graphic user interface and it is not Universal Binary therefore avoiding this I/O kit as it was designed for the specific configuration of the MacIntel only and works fine. Apple's iLife and iWork apps especially, as well as any SW using this I/O Kit API for Universal Binary apps don't work properly. Anyone with a later G4 and especially a G5 with a good, Core Image supported, graphics card should be feeling like they have a new machine, not saying "hey my stuff isn't working anymore" or slow imports of files or processing.
Personally I would:
Start up from 10.3 install discs, back up my docs to external HD and re-partition the internal HD. At least two, IMO three partitions (do not journal OS partitions) would be the least. Install 10.3.9 on one 10.4+ on the (an)other. Docs on the third. Keep the OS partitions as small as possible while allowing for OS's extra "operating space". 3.9 only requires about 2-5 GB's above required space to install while OS 10.4 seems to need 5-10 GB that is always "free" depending on what you are doing and also allowing for any OS and app. updates that may come before the next OS X release. 3.9 is already maxed so one can assume no new news here.
My G4's HD set up is 6 partitions as it is now mainly a slave hub between my MBP and my "legacy" products PB G3, serial devices, Zip drives, modems, SCSI devices, scanners, printers old apps/file formats. Apps and HW that are still useful but "max out" at a certain OS/comp configuration are installed on that OS's partition, i.e. QT w/MPEG-2, Virtual PC, or Photoshop plugins that were never developed or not worth the investment for OS X or the current release as they are not used often enough etc.
5GB-9.2.2, 10GB-10.2, 15GB- 10.3.9, 20GB-10.4.6, 15 GB Apps. 35GB docs. Nothing gets written to any OS partitions unless absolutely required. All OS's share the apps they can (except 9 apps) and document partition. As far as I understand I should be able to use XGrid to use these other computers processors through the MBP. A "super computer" kind of set up with the G4 at the least, but documentation indicates it should work on any OS X so possibly my G3 as well which stopped at 10.1.
You do not have to duplicate apps and I would install and update all through 3.9 even if you install them in the 10.4 Apps. folder. At most you may need to create a couple of folders in the OS's System Library for Application Support or plug-ins etc. If you fear one OS reading from the other's Library/System files you can unmount the other OS volumes but I have yet to see this happen without intentionally directing the OS to do so.
I would do all my external back ups and device communication (cameras, HD's MIDI's etc) booting in 10.3 only. For me the G4 booted in Target disk mode seems to be the safest way to access an "external HD" via FW with the MBP. I have had zero problems with this method. A two step process for files that don't reside on the G4 but I'd rather be safe than sorry and I have already lost one HD that was completely unrecoverable (a mechanical rebuild lead to the discovery of overwritten files with driver type data and damaged disk surface from arcing). Small files I just access on the external HD's through G4 over the airport network. I have not used Bonjour in depth yet though will most likely incorporate that into everyday use as I was able to quickly transfer a few very large files to a friends MacBook with it. Used this Just after realizing the MBP lacks IRDA and neither of us had any cables with us.
The above type of configuration would give you the ability to move forward with 10.4 and easily work around HW, SW and connectivity issues by booting into 10.3 when needed. This is a great way of trouble shooting OS and app issues. My MBP already has a partition waiting for Leopard. If the OS lacks something or has problems of it's own I can boot back into 10.4 quickly and easily. If all is well with Leopard 10.4 will definitely be removed. The G4 will never see Leopard except over a network.
Sorry to be long winded. Hope this gives you some reasonable ideas. In a nutshell. I believe the problem is that the OS and QT are set to higher, more accurate standards (ISO's MPEG's, SMTP's, IEEE's etc) than in the past and the I/O API is unable to communicate/calculate and transfer the information properly between devices and apps.
BTW when your LaCie appears to have given up the ghost and will not respond at all, before you toss the whole thing remove the HD and put it in a different enclosure. I have dealt with hundreds of these and the Firewire ports on the PC board become too hot and melt off. Repair is not possible and although this is a known issue with LaCie no attempts have been made to correct this and they will not sell you a service part to repair it. Replacement would require removal and replacement of two screws and two plugs. Most HD's I have removed are Western HD's and work fine in a new enclosure.
HTH

SIM card not valid after update

I updated to the iOS5, then I hooked up my NON-jailbroken 3GS. After "updating" everything this message appears:
The SIM card inserted in this iPhone does not appear to be supported.
I took my phone to my carrier, AT&T, and they cleaned the SIM card, didnt work. They replaced the SIM card, it didn't work. Tried to restore my phone, didn't work.
Any advice?

Just to make sure it wasn't a PC/Mac issue I have tried the following on each of 2 different windows PC's and a Mac & a MacBook Pro:
New installation/download of the Software update for iPhone 4, and each time putting the phone into recovery mode. I have also been using a new micro sim from O2 - obtained first thing this morning.
You do the maths on how much time this has taken, and guess what it still doesn't work....!
This has to be the most direct way of getting someone to upgrade to a new phone - the day before a new iPhone comes out - coincidence.......hmmm.
Just as a point of interest the iPhone was replaced in May this year, so is relatively new.
I do find it had to believe that there is no word from Apple as to the reason &/or a resolution.
COME ON

Sim card not valid after update to ios 5

just updated to iOs 5 on an AT&T iphone 4....says sim card not valid

Just to make sure it wasn't a PC/Mac issue I have tried the following on each of 2 different windows PC's and a Mac & a MacBook Pro:
New installation/download of the Software update for iPhone 4, and each time putting the phone into recovery mode. I have also been using a new micro sim from O2 - obtained first thing this morning.
You do the maths on how much time this has taken, and guess what it still doesn't work....!
This has to be the most direct way of getting someone to upgrade to a new phone - the day before a new iPhone comes out - coincidence.......hmmm.
Just as a point of interest the iPhone was replaced in May this year, so is relatively new.
I do find it had to believe that there is no word from Apple as to the reason &/or a resolution.
COME ON

Sim card not supported after updating software on iphone

so i was downloading the new software and it appeared to be working and it all of a sudden said "the sim card inserted in this iphone does not appear to be supported" ..it has the same telus sim card in it that it did before which is the one that came with it from telus ..any one know how to fix this or what it is all about? my phone wont work at all now and the only option on itunes for my iphone is eject..

I'm having same problem here. I can't live without my iphone,even my alarm is in my phone(kinda afraid that i can't wake up tomorrow). My phone is no longer in guarantee,so I don't think I can bring it to apple store.So,anyone please help me,I really need my phone

SD Card not showing after Mountain Lion Update

This matter has been discussed for some time now in
Apple Support Communities > Desktop Computers > iMac (Intel) > Discussions
SD Card not showing after Mountain lion Update
Since the update to Mountain Lion, the SD slot does not show up in Finder.
Someone gave a fix using the killall in Terminal, and that worked only once. I have not been able to get that fix to work again.
The only saving grace for me is that my SD Card us is always from my Nikon camera, and Nikon ViewNX 2 software is able to see and read from the card.
Killall may have worked partially in that I no longer get the error message telling me that I have removed the SD card improperly, and need to dismount it first.
However, Finder still cannot see it.

BrianForbesColgate wrote:
Thanks, Barney ...
Those are basics ... Been there, done that, first.
Then you should hava posted all the troubleshooting you already accomplished.
Does the card show up in System Information? Or is that another one of the "basics" you've already looked into?
Does it show up in Disk Utility? If so, have you tried formatting it there to determine if it is a formatting problem?

Ipod classic won't mount after updating to itunes 11.0.2

ipod classic won't mount after updating to itunes 11.0.2.
I updated to itunes 11.0.2 today, after delaying it for a looong time (I have it @ work and don't like the new layout).
Since then, none of my ipods will mount/show up/update. I've tried all USB ports, 3 ipods, 3 cords. Wondering if you know of any issues. I've restarted the mac about 15-20 times today since as soon as I hook up an ipod, itunes immediately spins the beach ball and won't let me click out of it.
I've restarted the ipods 10+ times each.
All of the ipods DO show up on my desktop though. Just not in itunes anywhere with 11.0.2.
One more thing: It's not the cables or the ipods: they both mount fine when connected to my laptop (running old *** 10.4.11 and itunes 9.)
Machine is a Mac Pro running 10.6.8.

Finding this Post took some time but I thought it was me talking when I read it. I was having the exact same issue. I have a G3 I've been upgrading like mad, including a Sonnet G4-500 CPU a Maxtor 60gb & 80gb HDs 1gb of RAM a new LaCie Firewire800 PCI card Graphics card etc. the latest was installing Panther 10.3.9 on the new 80gb HD and also swapping out the old CD-ROM and replacing with the (Apple standard) Pioneer DVD-RW DVR-110D combo drive in it's place. got everything up and booted and poof! no burning. Toast worked read/write no problem. iTunes could read and import no problem, but wouldn't burn a CD.
Downloaded "PatchBurn 3.1.3" installed, re-booted and all is OK in burner land again :>)
I wanted to just post my additional thanks to the lead to Patchburner, and I'm going to donate to the cause. It's worth a $20 donation just for my joy of not throwing this computer out the window!!

HT1688 My Hot Spot does not work after update to 6.0.1. Service is with ATT. Apple says problem is with ATT, ATT says problem is with Apple. Anyone else having this problem?

My Hot Spot does not work after update to 6.0.1. Any suggestions?

Ok, I had the same issue, my phone is unlocked(iphone 5 with 6.1.3). So I went to the apple store and had it replaced. it worked good for a day and started doing the same thing. When the apple tech replaced my phone, he transfered my screen protector to the new one.
so I thought it was my sim card, I put in my sisters sim card from a different carrier and it did the same, so then I was like let me take off the screen protector, and that was it.
so guys, if you have a screen protector on your phone and it's doing "low signal", "No Service", "Searching", "Full bars cycle" then take off the screen protector. so far my phone is working normal.

Print size in Photoshop CC does not work after updating

Print size in Photoshop CC does not work after updating, it was working fine before but now when I click to go to print size either from the menu of right chicking when the hand tool is selected, the image just zooms right out until it is a tiny little box in the centre of the screen, no good what so ever, as I say it was working fine before the update.
I am using window 7 with 8 gb of ram and an I7 with a 1GB graphics card.
Can anyone help please?
thanks
Fujibill

Check the Image>Image Size and see what the print size is supposed to to be for the open document.
Also, resetting the photoshop cc preferences might fix it.
http://forums.adobe.com/thread/375776?tstart=0

My new iPad sound is not working after updating to ios 6.1

My new iPad sound not working after updating to ios 6.1. Headphones are working fine. I tried all the troubleshoot. can anyone know the answer, plz share with me

Hi,
I have exactly the same issue as everyone above. I only get sound through the slider on the ringtone in settings and through my headphones. I do not get any sound anywhere else at all.
I Have tried:
- Updating to iOS 6.1.3
-re starting the device
-checking that the device is not muted. My slider switch is set to mute rather than lock and is unmuted.
-going into general settings and reset all settings
-the device reset several times (waiting until I saw the all important apple logo)
-removing the last few apps I installed.
Nothing at all has worked, please help!
New iPadiPad

Iphone 4 personal Hotspot not working after update to IOS 7.1 India BSNL cellular

Iphone 4 personal Hotspot not working after update to IOS 7.1 India BSNL cellular

BSNL is not a supported carrier. Personal Hotspot requires carrier support and provisioning of the account to enable it. iOS 7.1 disabled the ability to manually configure Personal Hotspot on unsupported carriers.

HELP ME! Nokia 5230 does not work after update

My nokia
5230 will not boot after update. I've also tried everything and red green camera button intedruken but nothing worked. Can someone help me I am so on vacation.
Sorry for my English I am Dutch

Have a look at this complete guide.. If nothing works, then the ONLY solution is to visit Nokia Care...

Click to activate does not work after update

Click to activate plugin does not work after updating to version 23.0.1

hello Kamullia, if you have set click-to-play to true in about:config you can now go to the ''addons-manager > plugins'' section and set the permissions individually for each plugin type.

WiFi iPhone 4S does not work after update iOS 6.0

WiFi iPhone 4S does not work after update iOS 6.0

This sounds more like a hardware issue.
Have you checked that the dock connector port is not dirty?

3G is not working after updating to iOS 6.1

My 3G connection is not working after updating to iOS 6.1. I have tried all possible solutions like resetting the network, restarting the phone etc.
With this kind of bugs in every update, Apple will no more be THE Apple.
There are bugs which have not been fixed even in the subsequent updates. SMSs going blank being one of them.
Miss you Sir Jobs.....

I have since managed to sort mine out - when the phone was updated it wiped out the network settings.
I was able to reset them by manually putting the information in:
Settings - General - Cellular - Cellular Data Network and then I put in the correct details for APN, username and Password in the relevant sections and now it works OK.
Hopefully it will work for others too

Razr HD SD card not mounting after update to JB 4.1.2

Similar Messages

Maybe you are looking for