RAZR M Unmounts SD Card When Connected to Charger

Seems like since I did the last update (could be coincidence) my Razr M will unmount my SD card when I connect it to my charger. It has done it more than once (every time since I noticed it was happening) and with both my home and car charger. SD card works after a reboot. SD card also works in a card reader on a windows PC. I did loose some files the first time it happened (changed several files, all not in a folder to 0Kb and a date of 1/1/1980) but none since then.
RAZR M
Android 4.1.2
System 98.18.94.XT907
Build 9.8.1Q-94
Build Date Sep 25 14:55:25 CDT 2013

I also have had the exact same issue with the Razr M. It started after the last update. If my phone is powered on when connecting to my charger it has a triangle icon that apears and says the card has been unexpectedly removed. I power cycle the phone and then it is fine. If I connect to the charger when the phone is powered of first and then power on there is no issue. I assumed It was an issue with the update and would be corrected soon. Note: It happens every time, not just occasionally.

Similar Messages

  • Phone doesn't turn on. And keeps on blinking when connected to charger

    Please help me.. Phone doesn't turn on. And keeps on blinking when connected to charger.. The logo keeps coming up and then vanishes..

    Similar problem here. Iphone 5 32gb met iOS 8.1.2 keeps blinking apple logo when connected to the charger but doesn't start up. iTunes doesn't recognise it, but i managed to get it into recovery mode. But sadly the update stops with an unknown error 2001. Changing cables, ports or even laptops doesn't help. DFU mode gives similar results.
    Any suggestions where to go from here?

  • 3rd gen iPod touch. I just get a blank screen (after a few secs of the apple symbol) when it is switched on or when connected for charging. I know the connections are OK. Suggestions/help please

    3rd gen iPod touch. I just get a blank screen (after a few secs of the apple symbol) when it is switched on or when connected for charging. I know the connections are OK. Suggestions/help please

    I took the iPod to the local Apple shop. The guy put the iPod onto a docking station and checked it - answer "connections are OK". I have used the link before but have not gone through all its suggestions (although picked on the most relevant ones). I may have to go back. Thanks again for your suggestions

  • My ipod nano 6th Gen. bought 5th Jan 2011 suddenly cannot be switched on. Last use is just 3h ago and everything went perfect til then Even shows no reaction when connected to charging cable. Anyone who can help?

    My ipod nano 6th Gen. bought 5th Jan 2011 suddenly cannot be switched on. Last use is just 3h ago and everything went perfect til then Even shows no reaction when connected to charging cable. Anyone who can help?

    See the Will not turn or screen remains dark section of this Apple support document to start troubleshooting the issue.
    iPod nano (6th generation): Hardware troubleshooting
    B-rock

  • My Xperia Z1 won't turn on and keep vibrating when connected to charger or PC

    Hello, my xperia z1 battery was drained off. i charge it with a galaxy charger but it didn't work then after went home i charged it with the original charger and tried to turn it on but it didn't, i left it over the night to charge then i woke up on a 3 continuous vibration sound, it kept vibrating till i disconnected the charger but it didn't turn on at all.. and every time i tried to put it to charge or connect it to pc with its USB cable it keep vibrating till i disconnect it. i don know if this could caused the problem but i used it to film videos in the pool but it was working very fine after that for more than 3 hours then when the battery was totally empty this happened. i tried mostly everything. i tried pressing volum up/down with the power button, i tried the red button beside the sim card slot, i tried connecting it to the pc with PC companion running repair but nothing work. it won't turn on, nothing from the LED indicators, just RED & Blue flickers appear wehn connecting to charger or to PC with the USB cable. anyone can help with anything that could solve this problem. ThanksMahmoud

    Try to follow these steps: perform a software repair using PC Companion.The process will erase all internal memory.You might need to charge your device for about 1-2 hours before so the device has at least 80% battery.
    Make sure the device is not connected to computer or laptop and turned off (sometimes you have to press power button and volume up until the device vibrates 3 times or on some devices you have to press the small button near the SIM tray or on the back of the device).
    Open PC companion->support zone->phone/tablet software update->repair my phone/tablet blue highlighted.Follow the steps given,do not connect your phone until prompted to press volume down while plugging USB cable. If PC companion does not start the repair process, you might need to run it in compatibility mode with Windows 7 (in some cases XP).

  • How do I get the backlight to stay on, when connected to charger / external power ?

    Hi,
    Is there a way of setting the backlight on my 8900 Curve so that when it is connected to the USB or Mains charger,
    ( and therefore not draining the battery ) the backlight stays on ?
    I can only find settings in Options / Screen/Keyboard, which I have set to leave the backlight on for 90 seconds, and dim automatically ?
    Obviously I don't want to leave the backlight on for longer than necessary when it is NOT connected to external power,.
    I was hoping that there are either some separate settings that I haven't discovered,
    which only apply when connected to external power, or failing that maybe an App that will do the job ???
    Thanks,
    If you found my answer ( or anyone else's ) to be helpful, don't forget to click the Kudos button !

    Coconut wrote:
    Hi,
    Is there a way of setting the backlight on my 8900 Curve so that when it is connected to the USB or Mains charger,
    ( and therefore not draining the battery ) the backlight stays on ?
    I can only find settings in Options / Screen/Keyboard, which I have set to leave the backlight on for 90 seconds, and dim automatically ?
    Obviously I don't want to leave the backlight on for longer than necessary when it is NOT connected to external power,.
    I was hoping that there are either some separate settings that I haven't discovered,
    which only apply when connected to external power, or failing that maybe an App that will do the job ???
    Thanks,
    When you first plug your phone in, it should go to the clock and that does stay lit. Other than that, there is no way to set the phone so that balcklight stays on.

  • My "4" won't turn on, won't charge when connected to charger or computer.  I've tried to reboot and it still doesn't turn on, its never been dropped or had water damage.  My warranty ran out on feb. 23, help!

    My "4" won't turn on.  It won't charge when connected to a charger or to the computer.  It's never been dropped, or had any water damage.  It looks like its brand new! The warranty ran on on Feb 23rd, help!!!

    Hello Breejumpp,
    Try Reset ( No Data will be lost )
    Press and Hold the On/Off switch (On top your iPhone) and the Home Button (Button at the bottom of your iPhone screen). Hold both the keys simultaneously for atleast 10 to 15 seconds and you should see an Apple Logo coming up on your screen, once you see the Apple logo you can then release oth On/Off switch and Home button and wait for your iPhone's Home screen.

  • My phone5 does not start. Apple logo just flashing when connected to charge

    my phone5 does not start. Apple logo just flashing when connected to charge

    connect to itunes and restore your iphone

  • No power on iPhone 3gs. Shows yellow screen, boots up then freezes at unlock screen when connected to charger repeatedly

    Recently i purchased an iPhone 3gs from someone and was told that the battery was defective. A replacement battery was also given to me with the phone. I went about using it and realized it would shut down when the phone was at about 75%-80%. A week later i decided to YouTube to change the batt, figuring that would solve the issue. The phone worked fine for 5 mins then went off. It didnt come on so i figured the batt was dead. went on and connected my charger. A yellow tint screen popped up then shortly after, the apple logo. Booted up well until it got to the unlock screen. It was frozen, was unable to put in my code. 2 mins later the phone reboots on its own and the same thing happens... over and over until i disconnect the charger. The batt shows its a 97% yet it wont stay on. I've tried to research but cant find anything that works. I NEED HELP!!!

    Called AppleCare this morning, confirmed that this is a hardware problem. Getting replacement.

  • My ipod only turns on when connected to charge

    Hi All,
    This is the first time I have ever posted to something like this so please bear with me if I am rambling / or left out any important info!
    I have a iPod Nano 3rd Gen, which I haven't used for quite a while due to me purchsing an iPhone a couple of years ago.
    I decided to dig it out and update the music on there.  I plugged it in to my laptop and all seemed to work fine.
    I left the iPod on charge overnight using the mains adapter that I have.
    Unfortunately, once I disconnected the iPod from the charger it won't turn on using the play button.  I reconnected to the charger, and the iPod will switch on.
    So looks like it will only turn on when connected to the power source, and won't work indepedently.
    As far as I know the iPod has never been in contact with any water, as it has been kept in a bedroom drawer whilst it hasn't been used, so i don't think the problem is that the iPod has become damp in any way.
    Has anybody else had a similar problem, and found a solution?
    Thanks

    I have a iPod Nano 3rd Gen, which I haven't used for quite
    The iPod's lithium-ion battery needs constant movement and action in order to maintain any sort of charge or capcity to charge.  So given that the iPod went unused for so long and the age of the device itself, it sounds like the iPod's battery is shot and in need of a replacement.
    You can choose to have Apple swap out the battery for a flat fee, send into a third party service center for a little less, or you can even purchase a replacement battery online and use one of the many numerous gudies online to walk you through the process of swapping it out.
    Here is Apple's pricing.  Google for third party service provider if you desire.
    http://www.apple.com/support/ipod/service/prices/
    B-rock

  • Ipad2 shut off after down the battery but when connect the charger my ipad2 is not storing the power in the battery and i also not finding the error code ???

    ipad2 shut off after down the battery but when i connect the charger with my ipad2,  its not storing the power in the battery and i also not finding the error code ???

    If you drained the battery, it may take a bit for it to come back. I'd plug it in and leave it for a few hours and see if it's charging.
    If not, you can try to do a reset. Hold down the sleep and home keys for about 20 seconds. When you see the white apple, let go and let it reset and see if it charges.
    It's also possible that your battery has reached the end of its life. THey can only handle a finite amount of recharge cycles. If you can't get it to hold a charge, then make an appointment at your local apple store and explore your other options.

  • Why does 2nd gen iPad flash when connected to charger?

    2nd gen ipad will not charge - instead flashes when connected to charger

    Try giving your iPad a reset. Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot and try again
    You can also try a different charger,cable and outlet and see if they are hte issue.
    Are you trying to charge via USB or plugged into the wall? If via USB, try charging with the included power block plugged into the wall

  • V570 - LAPTOP SWITCHED OFF WHEN CONNECTED TO CHARGER

    Hello,
    My Laptop V570, turned off automatically, when I connected the charger. I have tried the follows:
    1. Refixing the battery.
    2. Press and hold the switch-on key
    3. Tried conecting the charger, without the battery to know, if there is power supply to the laptop. Result was Negative
    Advice what should be done next.
    Regards
    Gijo Joseph

    Welcome to the Lenovo Community !
    If you have a voltmeter available I would check the output voltage of the charger.  It should be 20 volts DC at the plug that goes into the laptop.  If the charger's output more or less than the required 20 volts the laptop maybe shutting down in order to protect itself from the wrong voltage.  Page #30 of your model's Hardware Maintenance Manual will give you some additional information on the charger's plug.  Here is a link to that manual....
    http://download.lenovo.com/consumer/mobiles_pub/lenovo_v570_b570_b570e_hmm_v2.0.pdf
    If the charger checks out Ok then I would next try doing a BIOS reset.  This procedure is useful in resolving hardware conflicts.  Here's how......
    1. Unplug the charger / adapter.
    2. Remove the battery.
    3. Press and hold the Power Button for 15 seconds.
    4. Re-install the battery, plug in the charger / adapter if needed and power up the system to see if the problem was resolved.
    Owner & Operator of the following:
    ● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
    ● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
    ★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
    ★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
    ★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
    ★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

  • Ipad mini 2 turns on automatically when connected for charging while i have turned it off in the first place

    guys!! i just figured that my ipad mini2 automatically turns on when i try to charge it in off state . actually when plug to charge when the ipad is on fine it charges but when you switch it off i wont charge if you just plug the cable in when it is off it boots with the apple logo and turns on automatically !! Guys pls tell me if this is normal or i have to replace my ipad mini 2 . still have 1 year warranty guys !!!!!!!!!!!(while turned off and charging the battery indicator logo does not show up )

    It is normal. But there is no need to be powering off your iPad. Just put it to sleep.

  • Is there any risk to video cards when connecting TVs to iMacs via HDMI cables?

    Just want to know the risks before I do any damage.

    So I assume that if we buy our adapter from an Apple store, then it is the proper one?  I have a Moshi adapter.

Maybe you are looking for

  • Error in dataservice for attributes

    hi, We created a dataservvice for our xml DB. We have an element tag (a reference) with an attribute. We are using a namespace for the element. On executing it we get the following error: weblogic.xml.query.exceptions.XQueryDynamicException: {err}XQ0

  • After installing itunes 11.1 on windows 8 the programm crashes

    after installing the update 11.1 the programm crashes every time I try to open it. It's a windows 8 64 bit version.

  • HR ABAP: report catagory

    Hi, How can we create or change existing report catagory? Thanks, Madhu

  • Query regarding Name format page for Portugal

    Hi All, We are PeopleTools 8.50 and Peoplesoft HRMS Application 9.0. We have implemented the e recruit module for different countries and I would like to know if a delivered name format page exists for Portugal such as NAME_PRT_SEC because I do not f

  • Error message : No delivery items could be created

    Hi, I got this error message when I tried to create a delivery from the sales order. Appreciate if someone could advise me on what I have done wrong or missed out. Thanks!