RBDAPP01 is not processing Idoc's

Hi,
We are facing an issue that the RBDAPP01 program scheduled to process inbound Idoc's is not picking Idoc's for posting and running for ever with out processing Idoc's.
Please let me know what could be the reason for this kind of behavior.
Regards,
Cheritha

Hi ,
Check your idoc is in 64 status ? If it in 64 process then process with RBDAPP01 in background or Put that idoc in BD87 and process in foreground.
Thanks,
Asit Purbey

Similar Messages

Report RBDAPP01 not processing IDocs in status 51

Hello guys,
I have a problem with the execution of some Inbound Idocs using program RBDAPP01.
Now the Idoc is executed in background with a job. Sometimes we have some locks because we receive idocs going to the same order, and then remain in status 51.
In the variant of the job we filled to execute Idocs with status 64 and 51, but the idocs that remain in status 51 are not processed, at the end we have to do it manually.
There is no parallel processo to avoid the locks.
Do you know how we can solve it?
Many thans in advance.
Regards,
Xavi.

i do have the same problem. is there an solution to this?

Inbound Idocs are not Processing

Hi,
Inbound IDOCS queue is not processing if any one IDOC is showing amber(error) . Please let me know the resolution to avoid this issue or let me know the BASIS setting to avoid it.
Regards,
PVK.

Hello,
Can you please explain your issue is with "Trigger by Background program" or "Trigger immediately"?
For Trigger immediately, if there is no free dialog work process available than IDocs are posted with status 64.
For Trigger by Background program, Background job RBDAPP01 will process IDocs depending on variant you define to select & process IDocs(i.e., IDoc Status = 64).
It is always recommended to use "Trigger by Background program" for high volume interface which has large number of IDocs.
Help on RBDAPP01
Regards,
Sameer

IDOC is not processing in R/3 with status 64(Urgent)--Production issue.

Dear Folks,
Here we are implementing MIRROR sytem for data extraction in to BIW.
I had gone through the steps in PDF file(How to minimize down thime for Delta Initialization) which has given by SAP.
These are following steps I had performed in BW production
1. Using RSADMIN transcation- Assigned one user as a Debugging user.
2. With the Debugging user Created one infopackage on Purhcasing ITM datasource--
    In data selection tab, I given date as from 2002 to 2003
    In Update tab, I selected update mode as Initialize Delta process-               without data transfer and Uncheck Update Data in master   system immediately
   In schedule tab I selected option Start Data load immediately then Start extraction.
3.Data was requested and It was intialized properly with green status 1 from 1 Records.
4. In details tab Request, Extraction, transfer(IDOC and TRFC), Processing everything in Green color.
5.As per document I have checked in R/3 for IDOC with status 64 using transaction BD87/WE05
Problem is that IDOC is not processing in R/3 system. for that IDOC I have checked in BW montior screen using the option <b>IDOC list in Source sytem</b>, here also it is not showing any IDOCs.
Please let me know why BW sytem is not sending any IDOCs to source sytem.Is there any settings I could have miss in BW aswell as in R/3 system.
Note: In BW production I successfully loaded master data from R/3. aswell as I triggered infopackage-Initialization with data transfer, it is showing IDOC number properly in R/3 system.
Points is Assured for all replies.

Hi,
- check you RFC destination (normal test + authorization test)
- Check you partner profiles in WE20 and its ports WE21
- from the source system tree (RSA13) right click your source system and perform a check
- the best is to restore your source R/3 source system from BW (right click on it ans select RESTORE); you'll need to be able to log in the source system as an admin as well as opening the source system for customizing in SCC4 so that BW can recreate the correct partner parameters automatically; the best is to do that with your basis group.
hope this helps,
Olivier.

Idoc in 53 status but not processed completely. Missing authorisation error

Hi ,
Some of the ORDER Idocs are in 53 status, but the orders are not processed successfully and no PO created for these Idocs.
They got below warning message when I checked in WPER transaction code.
" Missing authorization: Purchase Order Create Purchasing Grou 110 " - "Workitems (tasks) were created for this IDoc"
This is happening once in a while for some of the idocs. Remaining all idocs are posting successfully.
These IDOCu2019s are processed via user background. Not sure why we have authorisation issues as this user has SAPALL. Any ideas?
Thanks
Deepthi.

done.

Idocs neding in 64 status and not processed further

Hi
We have inbound idocs of FIDCC2 message type, which are set to be triggered immediately. However we have noticed that sometimes (not always) these idocs are in 64 status and are not processed further. We have to manually reprocess them.
What could be the problem? Where should we start investigating?
Any help would be appreciated.
Thanks
Mick

I think the comment by Gautham Vangaveti is probably correct.
We hit the same issue occassionally. We have IDOCS as trigger immediately, but at the time they try to process, there are no available work processes which can handle the IDOC and they sit at status 64.
There is an oss note 1333417 which describes the situation
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1333417
And unhelpfully suggests changing over to processing by batch job, which is not always appropriate.
It may be worth enlisting help from you Basis team to try and indentify if those going to status 64 are occuring at the same time each day, and maybe looking to see what other processes are running at that time. If the load on the system can be managed then the problem may go away, it did for us.
Otherwise, Basis may be able to increase the number of work process which may also resolve the issue.

Idocs are not processed in the right order.

Hi,
I face a problem that when there are a large number of IDocs (Inbound) posted the Idocs are not processed in the right order.
Msg type: MBGMCR
any idea how this can happen?
what is the solution?
br
Karen

No answer

Idoc in 53 status but not processed completely.

Hi ,
Some of the ORDER Idocs are in 53 status, but the orders are not processed successfully and no PO created for these Idocs.
They got below warning message when I checked in WPER transaction code.
" Missing authorization: Purchase Order Create Purchasing Grou 110 " - "Workitems (tasks) were created for this IDoc"
This is happening once in a while for some of the idocs. Remaining all idocs are posting successfully.
Any idea what might be the reason?
Thanks
Deepthi.

Hello,
This seems to be an Authorisation issue, Kindly check for Purchasing Group 110, who are all assigned Buyers...
Then for those Buyers.. you can check what authorization is missing from Su53..
Compare with those who has authorisation to create PO Vs who does not have ..
you will have to provide the same authorisation to those users
Thanks and regards
PJ

Timeout when processing IDocs

Hi,
I have a problem when I process IDocs in CRM 5.0 system. The IDocs of BP are sent via middleware into my system. When I use BD87 to select some IDocs, it often to be timeout. And if I use report RBDAPP01 to process IDocs as a background job, it often took long time and not finished.
I have looked at process via SM51, and found the progress seems to stay at program "SAPLBUBA_4" or "SAPLBUD_MEM".
Do anyone know the cause of this problem? And how to solve it?
Thank you very much for your help!
Best regards,
Long

Hi,
Instaed of sending bulk of idocs ,break them and schedule the program RBDAPP01..say there are 2000 idocs to be processed..
For exmaple create a variant of say 1 to 1000 and then schedule the program RBDAPP01 and once again crerate another variant with 1001 TO 2000 and then once again schedule RBDAPP01..Now in this case 2 jobs will shedule with 1000 idocs...
Regards,
Nagaraj

Did you meet error AM840 when processing IDocs?

Hi,
When I process IDocs of BP, there is a popup which said "Database error deleting from table ADRCOMC MessageNo:AM840". I have searched Notes, but no useful information founded.
Do you know the cause of that error? How to solve it?
Thanks!
Best regards,
Long

Hi Sudheer,
Sorry, I made a mistake. You are right. The problem is because that some records of communication type are missing in table ADRCOMC.
Then I firstly check if it has missing data, then do processing.
Another question, currently when I usd Tcode: BD87 and select some IDocs when are not processed. If I click "Process" button, the program "RBDAPP01" should be executed and select the IDocs to be processed firstly. But at this step it often run exceed timeout. I looked at process via SM51 and found that when executing "Select * from BUT0TP...." statement, it needs very long time and then execeed timeout. Do you know why?
Thank you very much for your help!
Best regards,
Long

RBDAPP01 Leaves Status 64 IDOCs

Hi all,
RBDAPP01 with parallel processing and the "Wait for End of Processing" flag checked often finishes with Status 64 IDOCs that match the selection criteria. Re-running RDBAPP01 will often process the remaining IDOCs. How can I determine why RDBAPP01 does not complete all of the processing of status 64 IDOCs?
Thanks,
Steve

Hi,
64 - IDoc ready to be passed to application. The IDoc will be passed to the application by program RBDAPP01.
Although the partner profile is defined and the IDoc has been received, the IDoc cannot be transferred to the application.
You trigger transmission of the IDoc using report RBDAPP01. To do this, plan a regular job in background processing for this report.
Check the processing mode for the IDoc in the partner profile:
Processing mode 1: The system transmits the IDoc immediately after receipt in the application.
Output mode 3: The system collects received IDocs.
IDocs are not intended to be transmitted directly to the application.
Status 64 in the IDoc can normally only occur in conjunction with processing mode 3 and output mode 2
<b>Reward points</b>
Regards

Inconsistent Errors when processing IDocs using custom Function Module

I am encountering a most perplexing error. Here is the situation.
We have a custom function module to update data in the EH&S system. We are having a bizarre error occurring. This is the basic processing of the function module:
1. IDoc data is read and loaded into an internal table.
2. Data is run through a series of checks to determine if the data is valid for entry into the system.
3. After validation we use function module C1F2_SUBSTANCES_READ_WITH_REF to read characteristic data for the substance. This data is used to validate whether current data exists to allow for loading of the IDoc data. (This is the step where the IDoc is receiving an error even if the data is valid. This only occurs if we are processing a large amount of Idocs and one IDoc contains valid data and another invalid data for the same substance. It occurs even if the Idocs are not processed in sequence. If individually processed or reprocessed after initial failure they pass. This is what is so confusing!) If it exists, a flag is set and the data is loaded using function module BAPI_BUS1077_CHANGE to modify the data.
4. If the flag is set to allow further processing, the function module C1F2_SUBSTANCES_READ_WITH_REF is used again to select different characteristic data for the substance. A similar validation process occurs and if it passes, data is loaded using BAPI_BUS1077_CHANGE to update and BAPI_BUS1077_CREATE to create new data.
Here is the situation:
When processing one valid record for one substance, the record loads successfully. When processing multiple valid records (all are valid) for one substance, they all load successfully. The problem occurs when attempting to load valid and invalid records for the same substance. Some times the program successfully loads the valid data (as expected). Other times, it will not load any records. It is not consistent!
The order of IDoc processing does not have an impact on the success of the load. Whether the valid or invalid record processes first does not have an impact on the success of the valid substance load.
Does anyone have ANY Idea of what is going on? I am clearing all fields in the function module before processing occurs. I cannot find what is causing the error to occur.
HELP!
Jim Hardy

I have some further information. It seems that if data for a substance is sent in two separate Idocs, one with valid and one with invalid data, As long as the two IDocs are processed consecutively, they process correctly. If they are separated by IDocs containing other substance information, they fail.
thanks
Jim

RSEOUT00 failing with "Could not write IDoc to file" TPRI_DEF table

Outbound Idoc processing fail with the following error:
Could not write IDoc to file
Message no. EA299
Diagnosis
The system could not convert data from the data record 000027.
Procedure
Check the port definition of the receiver port.
You can use the "Continue despite conversion error" option to write the IDoc to the file from transaction BD87 with replacement characters.
Short dump indicate that there is a some junk character in th e TPRI_DEF for program SAPLSPRI that it is unable to convert.
I have set the flag on the we21 port to "continue despite conversion error" and that seem to help, but I would like to figure out how to fix the junk characters from coming through from the TPRI_DEF table.
This is what shows up in the short dump after RSEOUT00 is run.
TPRI_DEF                                   / /       : :     00002932
    010GV21            \0\0\0\0\x0006āȂ耀㐱〲\0\0嬇\0ሟ鴂푎眩\x0802儔잏퉓
I do not see any entries for area "GV" in the table, there is one for "GF". which has no user assigned to it and it is of key version 21.
I am not sure if the table is supposed to have an entry with no user assigned?
thank you for looking at this issue .

HI Jurgen,
we have the same issue, chinese charecter is in PO text header. so facing error. If we click unicode format then it works fine as my testing in development.
I just want to knom what is the impact if i clicked directly unicode format ?( with refernce to your reply above " have you set the Unicode format flag directly above in WE21?" )
I doc is going from SAP sytem - (PO information )
Pls adivce..
waiting for your reply..
Thanks in advance

EDI not Processing in bd87 but successful in WE19

Hi Gurus,
I have an custom function module to post EDI 856 (Shipments) to SAP, I am getting an error when processing idoc through BD87 "Function module not allowed: <my Z function module>".
I tried execute the same in debug mode in WE19, and it was successfully posting.
Also i found a strange situation here that when i use the "Inbound function module button" and post it posts successfully but when I use the "Standard Inbound" button i am getting the error (EDI status 51) as i get in the BD87.
Any solution on this please
Regards
M.Senthilvel

Hi M.Senthilvel
When you are execute the same in debug mode in WE19,
check
Standard inbound Button>>>
Processing Details:
Process code xxxx
Function name xxxx_xxx_xxxx
and
inbound Function Module Button>>>
Function Module
Then you will understand is there any Diff....
Thanks
Ramesh

What is the Successfull processed IDOC status number?

Hi Experts
What is the Successfull processed IDOC status number?
arjent Please.
Thanks in advance
Sekhar

Hi Chandra,
Below are IDoc Process Codes
For outboud Idocs:
1 IDoc created
2 Error passing data to port
3 Data passed to port OK
4 Error within control information of EDI subsystem
5 Error during translation
6 Translation OK
7 Error during syntax check
8 Syntax check OK
9 Error during interchange handling
10 Interchange handling OK
11 Error during dispatch
12 Dispatch OK
13 Retransmission OK
14 Interchange Acknowledgement positive
15 Interchange Acknowledgement negative
16 Functional Acknowledgement positive
17 Functional Acknowledgement negative
18 Triggering EDI subsystem OK
19 Data transfer for test OK
20 Error triggering EDI subsystem
21 Error passing data for test
22 Dispatch OK, acknowledgement still due
23 Error during retransmission
24 Control information of EDI subsystem OK
25 Processing despite syntax error (outbound)
26 Error during syntax check of IDoc (outbound)
27 Error in dispatch level (ALE service)
28 Not used
29 Error in ALE service
30 IDoc ready for dispatch (ALE service)
31 Error - no further processing
32 IDoc was edited
33 Original of an IDoc which was edited
34 Error in control record of IDoc
35 IDoc reloaded from archive
36 Electronic signature not performed (timeout)
37 IDoc added incorrectly
38 IDoc archived
39 IDoc is in the receiving system (ALE service)
40 Application document not created in receiving system
41 Application document created in receiving system
42 IDoc was created by test transaction
50 IDoc added
For Inound Idocs
51 Error: Application document not posted
52 Application document not fully posted
53 Application document posted
54 Error during formal application check
55 Formal application check OK
56 IDoc with errors added
57 Test IDoc: Error during application check
58 IDoc-Copy from an R/2 connection
59 Not used
60 Error during syntax check of IDoc (inbound)
61 Processing despite syntax error (inbound)
62 IDoc passed to application
63 Error passing IDoc to application
64 IDoc ready to be transferred to application
65 Error in ALE service
66 IDoc is waiting for predecessor IDoc (serialization)
67 Not used
68 Error - no further processing
69 IDoc was edited
70 Original of an IDoc which was edited
71 IDoc reloaded from archive
72 Not used, only R/2
73 IDoc archived
74 IDoc was created by test transaction
Regards,
Satish

RBDAPP01 is not processing Idoc's

Similar Messages

Maybe you are looking for