RC-50004: Fatal: Error occurred in ApplyDatabase
Hi
On 19th august,2009, i ran the preclone on db & apps tier, copied files from source to destination (from one mount point to the other in the same AIX server) for cloning. For some reasons, we changed the system date to 1st april, 2009. When i tried to run adcfgclone.pl on db tier, getting the following error
50% completed RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
ERROR while running Apply...
Thu Apr 2 02:40:08 2009
ERROR: Failed to execute /xxx/appsutil/clone/bin/adclone.pl
(replaced the original path with /xxx).
Is it related with server date? Any help, how can resolve this issue?
Ateeq,
If you could refer your previous thread,
[UAT problem,management telling to change sytem date,any impact on apps&Db?|http://forums.oracle.com/forums/thread.jspa?threadID=947570]
I have mentioned that there could be serious implication of changing the SYSTEM DATE. Look this was one of them, error while cloning.
ORA-01565: error in identifying file
'/clone/crp2clone/DEV1/DEV1/db/apps_st/data/XXSCC.dbf'
ORA-27037: unable to obtain file status
IBM AIX RISC System/6000 Error: 2: No such file or directoryThis means that on 1st APRIL you must have not added this datafile XXSCC.dbf to your database. There could be some work-around and you can start your DB but what about the data after 1-APRIL till date you will loose all that.
You can refer the following ML doc,
[How to clone/duplicate a database with added datafile with no backup.|https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=292947.1]
I think you must do the cloning with the current date so that no data is loose. You may try changing the SYSTEM date after that so that we can work on the possibilities.
Thanks,
Anchorage :)
Similar Messages
-
RC-50004: Fatal: Error occurred in ApplyDatabase:Control file creation fail
Hi,
During the clone of R12.1 instance, while running the post clone on the DB tier, i am getting the following error
RC-50004: Fatal: Error occurred in ApplyDatabase:Control file creation failed.
when i looked into the log file, i can find this
Creating the control file for hr12at1_jsrc-cn6 database ...
SQL*Plus: Release 11.1.0.7.0 - Production on Tue Nov 17 04:41:58 2009
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1071333376 bytes
Fixed Size 1318172 bytes
Variable Size 427819748 bytes
Database Buffers 629145600 bytes
Redo Buffers 13049856 bytes
Control file created.
alter database open resetlogs
ERROR at line 1:
ORA-01152: file 2 was not restored from a sufficiently old backup
ORA-01110: data file 2:
'/u01/app/oracle11/db/apps_st/u32/oradata/R12HRM/tx_data11.dbf'
Please help
thanks a lot
SasikalaHi,
Sorry, my mistake, I did not pay attention to the cloning part.
For this error, looks like the database was not cleanly shutdown before copying the files or that preclone was not run successfully. You will have to run preclone again, and shutdown the database normally, then copy the file again.
Regards,
Hussein -
RC-50004: Fatal: Error occurred in ApplyDatabase: Control file creation fai
Hi guys,
I am cloning and EBS 12.1.3 from one server to another, and when Configuring the target system database server with ''perl adcfgclone.pl dbTier'', I am getting the following error:
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
MOS is saying that it is due to wrong permissions on the /var/tmp/.oracle directory and we should give it the following permissions:
chmod 777 /var/tmp/.oracle
After giving those permissions and rebooting the server , and running the perl adcfgclone.pl dbTier script, I am still having the same problem:
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
This is the contents of the ApplyDBTier log file (since the file exceed 30.000 characters, i am going to post the parts where the errors occur:
[oratest@DLAERPSRV01 ERP_DLAERPSRV01]$ cat ApplyDBTier_05021530.log
Started ApplyDBTier at Thu May 02 15:30:44 WAT 2013
Version:
ApplyDBTier.java : 120.6.12010000.3
ApplyDBTier (prog) -1 true true true...
# Calling ApplyDBTechStack...
Executing runInstallDriver...
Started unzipping files...
Completed runInstallDriver.
Executing home registration for s_db_oh...
instantiate file:
source : /u02/oratest/db/tech_st/11.1.0/appsutil/template/adouidb.pl
dest : /u02/oratest/db/tech_st/11.1.0/appsutil/clone/ouicli.pl
backup : /u02/oratest/db/tech_st/11.1.0/appsutil/clone/ouicli.pl to /u02/oratest/db/tech_st/11.1.0/appsutil/out/ouicli20.pl
setting permissions: 700
setting ownership: oratest:dba
instantiate file:
source : /u02/oratest/db/tech_st/11.1.0/appsutil/template/config_ux.tmp
dest : /u02/oratest/db/tech_st/11.1.0/rdbms/lib/config.c
backup : /u02/oratest/db/tech_st/11.1.0/rdbms/lib/config.c to /u02/oratest/db/tech_st/11.1.0/appsutil/out/config21.c
setting permissions: 700
setting ownership: oratest:dba
instantiate file:
source : /u02/oratest/db/tech_st/11.1.0/appsutil/template/adlnkoh.sh
dest : /u02/oratest/db/tech_st/11.1.0/appsutil/clone/adlnkoh.sh
backup : /u02/oratest/db/tech_st/11.1.0/appsutil/clone/adlnkoh.sh to /u02/oratest/db/tech_st/11.1.0/appsutil/out/adlnkoh20.sh
setting permissions: 700
setting ownership: oratest:dba
Executing script in InstantiateFile:
/u02/oratest/db/tech_st/11.1.0/perl/bin/perl -I /u02/oratest/db/tech_st/11.1.0/perl/lib/5.8.3 -I /u02/oratest/db/tech_st/11.1.0/perl/lib/site_perl/5.8.3 -I /u02/oratest/db/tech_st/11.1.0/appsutil/perl /u02/oratest/db/tech_st/11.1.0/appsutil/clone/ouicli.pl
script returned:
Beginning OUI CLI cloning for s_db_ohThu May 2 15:30:46 2013
/u02/oratest/db/tech_st/11.1.0/appsutil/jre/bin/java -classpath /u02/oratest/db/tech_st/11.1.0/appsutil/java:/u02/oratest/db/tech_st/11.1.0/oui/jlib/OraInstaller.jar:/u02/oratest/db/tech_st/11.1.0/appsutil/java/xmlparserv2.jar oracle.apps.ad.clone.util.OracleHomeCloner -OUICLI -e /u02/oratest/db/tech_st/11.1.0/appsutil/ERP_DLAERPSRV01.xml -nolink -oaVar s_db_oh -homestub db -log /u02/oratest/db/tech_st/11.1.0/appsutil/log/ERP_DLAERPSRV01/ohclone.log
Running OUI CLI home cloning from within OracleHomeCloner:
/u02/oratest/db/tech_st/11.1.0/oui/bin/runInstaller -clone -silent -force -nolink -waitForCompletion -invPtrLoc /u02/oratest/db/tech_st/11.1.0/admin/oui/ERP_DLAERPSRV01/oraInst.loc ORACLE_HOME=/u02/oratest/db/tech_st/11.1.0 ORACLE_BASE=/u02/oratest/db/tech_st/11.1.0 ORACLE_HOME_NAME=ERP_DB__u02_oratest_db_tech_st_11_1_0 -J-Doracle.installer.noLink=true
Finished OUI CLI cloning for s_db_oh with return code: 0Thu May 2 15:30:56 2013
Executing script in InstantiateFile:
/u02/oratest/db/tech_st/11.1.0/appsutil/clone/adlnkoh.sh
script returned:
adlnkoh.sh started at Thu May 2 15:30:56 WAT 2013
Log file located at /u02/oratest/db/tech_st/11.1.0/appsutil/log/ERP_DLAERPSRV01/make_05021530.log
Using make file "ins_emagent.mk" for linking SYSMAN utilities...
Error while running adlnkoh.sh.
return code = .16
Please check logfile located at /u02/oratest/db/tech_st/11.1.0/appsutil/log/ERP_DLAERPSRV01/make_05021530.log
.end std out.
.end err out.
Executing Technology Stack Configuration...
Executing runAutoConfig...
Deleting files of type INSTALL
Checking for file: /u02/oratest/db/tech_st/11.1.0/network/admin/ERP_DLAERPSRV01/sqlnet.ora
Processing driver file: /u02/oratest/db/tech_st/11.1.0/appsutil/template/addbtmpl.drv
Checking for file: /u02/oratest/db/tech_st/11.1.0/appsutil/install/ERP_DLAERPSRV01/txkConfigDbOcm.pl
File exists
File deleted
Checking for file: /u02/oratest/db/tech_st/11.1.0/dbs/initERP.ora
File exists
File deleted
Checking for file: /u02/oratest/db/tech_st/11.1.0/network/admin/ERP_DLAERPSRV01/listener.ora
File exists
File deleted
Checking for file: /u02/oratest/db/tech_st/11.1.0/network/admin/ERP_DLAERPSRV01/tnsnames.ora
File exists
File deleted
Testing for RAC specific parameters before running autoconfig
No RAC specific parameters were found, running with CVM
Starting CVM in INSTE8_SETUP mode
Using Context file : /u02/oratest/db/tech_st/11.1.0/appsutil/ERP_DLAERPSRV01.xml
Attempting to create a back up of the Context file
Created back up file of name :
/u02/oratest/db/tech_st/11.1.0/appsutil/out/ERP_DLAERPSRV01/05021531/ERP_DLAERPSRV01.xml
===========================================================================
Starting synchronization of file system Context file and its templates with those in the database
Database connection : Failed
OAM Context editing support feature: Unverified
OAM Customization support feature : Unverified
File system template : /u02/oratest/db/tech_st/11.1.0/appsutil/template/adxdbctx.tmp
Checking for customizations to Context template
Warning: Unable to connect to Database.
If the system is OAM enabled, this may result in loss of customizations.
Looking for custom template at : /u02/oratest/db/tech_st/11.1.0/appsutil/template/custom/adxdbctx.tmp
Custom template : Not Available
Customizations found : None
File system Context file :/u02/oratest/db/tech_st/11.1.0/appsutil/ERP_DLAERPSRV01.xml
Checking the Context file for possible updates from the Database
Warning: Unable to connect to Database.
If the system is OAM enabled, this may result in loss of customizations and the Context files in DataBase and in the file system may be unsynchronized
===========================================================================
Starting Updates of Context file Thu May 02 15:31:44 WAT 2013
found context version : 120.34.12010000.14
available update version : 120.34.12010000.14
No updates to apply
Starting DB listener with command:
/u02/oratest/db/tech_st/11.1.0/appsutil/scripts/ERP_DLAERPSRV01/addlnctl.sh start ERP
Logfile: /u02/oratest/db/tech_st/11.1.0/appsutil/log/ERP_DLAERPSRV01/addlnctl.txt
You are running addlnctl.sh version 120.1.12010000.4
Starting listener process ERP ...
LSNRCTL for Linux: Version 11.1.0.7.0 - Production on 02-MAY-2013 15:32:23
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Starting /u02/oratest/db/tech_st/11.1.0/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 11.1.0.7.0 - Production
System parameter file is /u02/oratest/db/tech_st/11.1.0/network/admin/ERP_DLAERPSRV01/listener.ora
Log messages written to /u02/oratest/db/tech_st/11.1.0/admin/ERP_DLAERPSRV01/diag/tnslsnr/DLAERPSRV01/erp/alert/log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=DLAERPSRV01.camairco.local)(PORT=1523)))
STATUS of the LISTENER
Alias ERP
Version TNSLSNR for Linux: Version 11.1.0.7.0 - Production
Start Date 02-MAY-2013 15:32:23
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u02/oratest/db/tech_st/11.1.0/network/admin/ERP_DLAERPSRV01/listener.ora
Listener Log File /u02/oratest/db/tech_st/11.1.0/admin/ERP_DLAERPSRV01/diag/tnslsnr/DLAERPSRV01/erp/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523)))
Services Summary...
Service "ERP" has 1 instance(s).
Instance "ERP", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
addlnctl.sh: exiting with status 0
addlnctl.sh: check the logfile /u02/oratest/db/tech_st/11.1.0/appsutil/log/ERP_DLAERPSRV01/addlnctl.txt for more information ...
.end std out.
.end err out.
checking DB Connection...
DEBUG: checkDBConnection in()
ADX Database Utility
getConnection() -->
sDbHost : DLAERPSRV01
sDbDomain : camairco.local
sDbPort : 1523
sDbSid : ERP
sDbUser : apps
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@DLAERPSRV01.camairco.local:1523:ERP
Exception occurred: java.sql.SQLRecoverableException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523))(CONNECT_DATA=(SERVICE_NAME=ERP)))
Exception occurred: java.sql.SQLRecoverableException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523))(CONNECT_DATA=(SERVICE_NAME=ERP.camairco.local)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
DEBUG: checkDBConnection out()
Skipping Profile Phase
Skipping Apply Phase
Executing CreateDB...
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : DLAERPSRV01
sDbDomain : camairco.local
sDbPort : 1523
sDbSid : ERP
sDbUser : apps
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@DLAERPSRV01.camairco.local:1523:ERP
Exception occurred: java.sql.SQLRecoverableException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523))(CONNECT_DATA=(SERVICE_NAME=ERP)))
Exception occurred: java.sql.SQLRecoverableException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523))(CONNECT_DATA=(SERVICE_NAME=ERP.camairco.local)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
adcrdb.sh started at Thu May 2 15:32:40 WAT 2013
The environment settings are as follows ...
ORACLE_HOME : /u02/oratest/db/tech_st/11.1.0
ORACLE_SID : ERP
TWO_TASK :
PATH : /u02/oratest/db/tech_st/11.1.0/perl/bin:/u02/oratest/db/tech_st/11.1.0/bin:/usr/bin:/usr/sbin:/u02/oratest/db/tech_st/11.1.0/appsutil/jre/bin:/bin:/usr/bin/X11:/usr/local/bin:/u02/oratest/db/tech_st/11.1.0/appsutil/clone/bin/../jre/bin:/u02/oratest/db/tech_st/11.1.0/appsutil/clone/bin/../jre/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/home/oratest/bin:.
LD_LIBRARY_PATH : /u02/oratest/db/tech_st/11.1.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/u02/oratest/db/tech_st/11.1.0/lib:/usr/dt/lib:/u02/oratest/db/tech_st/11.1.0/ctx/lib
Executable : /u02/oratest/db/tech_st/11.1.0/bin/sqlplus
The log information will be written to
/u02/oratest/db/tech_st/11.1.0/appsutil/log/ERP_DLAERPSRV01/adcrdb_ERP.txt
Creating the control file for ERP_DLAERPSRV01 database ...
SQL*Plus: Release 11.1.0.7.0 - Production on Thu May 2 15:32:40 2013
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORA-27154: post/wait create failed
ORA-27300: OS system dependent operation:semget failed with status: 22
ORA-27301: OS failure message: Invalid argument
ORA-27302: failure occurred at: sskgpbitsper
CREATE CONTROLFILE REUSE SET DATABASE "ERP"
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter database open resetlogs
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter tablespace TEMP add tempfile '/u02/oratest/db/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
ALTER DATABASE RENAME GLOBAL_NAME TO "ERP.camairco.local"
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Connected to an idle instance.
ORA-27154: post/wait create failed
ORA-27300: OS system dependent operation:semget failed with status: 22
ORA-27301: OS failure message: Invalid argument
ORA-27302: failure occurred at: sskgpbitsper
BEGIN dbms_backup_restore.zeroDbid(0); END;
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
ORACLE instance shut down.
Connected to an idle instance.
ORA-27154: post/wait create failed
ORA-27300: OS system dependent operation:semget failed with status: 22
ORA-27301: OS failure message: Invalid argument
ORA-27302: failure occurred at: sskgpbitsper
CREATE CONTROLFILE REUSE SET DATABASE "ERP"
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter database open resetlogs
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter tablespace TEMP add tempfile '/u02/oratest/db/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
ALTER DATABASE RENAME GLOBAL_NAME TO "ERP.camairco.local"
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
declare lib_ver varchar2(3);
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
ERROR:
ORA-01012: not logged on
Process ID: 0
Session ID: 0 Serial number: 0
Disconnected
exit_code=1
Checking for errors ...
The database has not been successfully created. Shutting down the instance ...
SQL*Plus: Release 11.1.0.7.0 - Production on Thu May 2 15:32:42 2013
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Connected to an idle instance.
ORACLE instance shut down.
Disconnected
.end std out.
.end err out.
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : DLAERPSRV01
sDbDomain : camairco.local
sDbPort : 1523
sDbSid : ERP
sDbUser : apps
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@DLAERPSRV01.camairco.local:1523:ERP
Exception occurred: java.sql.SQLRecoverableException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523))(CONNECT_DATA=(SERVICE_NAME=ERP)))
Exception occurred: java.sql.SQLRecoverableException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523))(CONNECT_DATA=(SERVICE_NAME=ERP.camairco.local)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase
StackTrace:
java.lang.Exception: Control file creation failed
at oracle.apps.ad.clone.ApplyDatabase.doConf(ApplyDatabase.java:635)
at oracle.apps.ad.clone.ApplyDatabase.doApply(ApplyDatabase.java:473)
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:366)
at oracle.apps.ad.clone.ApplyDBTier.<init>(ApplyDBTier.java:110)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
at java.lang.reflect.Constructor.newInstance(Unknown Source)
at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:67)
at java.lang.Thread.run(Unknown Source)
[oratest@DLAERPSRV01 ERP_DLAERPSRV01]$
Please guys, how can I solve this problem?@Hussain Sawwan
Hi Hussain,
After successfully configured the DbTier and AppsTier with their respective post clone scripts the appstier was automatically started at the end.
But now, I can't seem to connect with my IE 9 and Firefow browsers.
Link: http://dlaerpsrv01.camairco.local:8002/OA_HTML/
Contents of the portpool.lst:
***** List of ports allocated based on port pool 2 *****
Database Port : 1523 (EXT_PORT)
RPC Port : 1628
Web SSL Port : 4445
ONS Local Port : 6102
ONS Remote Port : 6202
ONS Request Port : 6502
Web Listener Port : 8002
Active Web Port : 8002 (DUP_PORT)
Forms Port : 9002
Metrics Server Data Port : 9102
Metrics Server Request Port : 9202
JTF Fulfillment Server Port : 9302
MSCA Server Port : 10212-10217
MCSA Telnet Server Port : 10212,10214,10216 (DUP_PORT)
MSCA Dispatcher Port : 10806
Java Object Cache Port : 12347
OC4J JMS Port Range for Oacore : 23010-23014
OC4J JMS Port Range for Forms : 23510-23514
OC4J JMS Port Range for Home : 24010-24014
OC4J JMS Port Range for Oafm : 24510-24514
OC4J JMS Port Range for Forms-c4ws : 26510-26514
OC4J AJP Port Range for Oacore : 21510-21514
OC4J AJP Port Range for Forms : 22010-22014
OC4J AJP Port Range for Home : 22510-22514
OC4J AJP Port Range for Oafm : 25010-25014
OC4J AJP Port Range for Forms-c4ws : 26010-26014
OC4J RMI Port Range for Oacore : 20010-20014
OC4J RMI Port Range for Forms : 20510-20514
OC4J RMI Port Range for Home : 21010-21014
OC4J RMI Port Range for Oafm : 25510-25514
OC4J RMI Port Range for Forms-c4ws : 27510-27514
[root@DLAERPSRV01 appltest]#
Entry in the /etc/hosts in my Win 7 Laptop:
192.168.0.245 dlaerpsrv01.camairco.local dlaerpsrv01
What could be the cause of this problem? It is unfortunate to reach at this point and not being able to connect. -
dear associates,
linux version: red hat enterprise linux 4.0.
EBS version: 12.1.1
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instancedear associates,
can u please assist me how can over come this error or problem.
linux version: red hat enterprise linux 4.0.
EBS version: 12.1.1
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance -
RC-50004: Fatal: Error occurred in ApplyDatabase: Control file creation failed
There's anyone ever get error like this?
[oradev@ebs bin]$ ./adcfgclone.pl dbTier
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LC_CTYPE = "UTF-8",
LANG = "en_US.UTF-8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
Copyright (c) 2011 Oracle Corporation
Redwood Shores, California, USA
Oracle E-Business Suite Rapid Clone
Version 12.2
adcfgclone Version 120.63.12020000.7.1202010.2
Enter the APPS password :
Running:
/u01/DEV/11.2.0/appsutil/clone/bin/../jre/bin/java -Xmx600M -cp /u01/DEV/11.2.0/appsutil/clone/jlib/java:/u01/DEV/11.2.0/appsutil/clone/jlib/xmlparserv2.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/ojdbc5.jar oracle.apps.ad.context.CloneContext -e /u01/DEV/11.2.0/appsutil/clone/bin/../context/db/CTXORIG.xml -validate -pairsfile /tmp/adpairsfile_21933.lst -stage /u01/DEV/11.2.0/appsutil/clone 2> /tmp/adcfgclone_21933.err; echo $? > /tmp/adcfgclone_21933.res
Log file located at /u01/DEV/11.2.0/appsutil/clone/bin/CloneContext_0329113348.log
Provide the values required for creation of the new Database Context file.
Target System Hostname (virtual or normal) [ebs] :
Target Instance is RAC (y/n) [n] :
Target System Database SID : DEV
Target System Base Directory : /u01/DEV
Target System utl_file_dir Directory List : usr/tmp
RC-00213: Warning: The path specified must be the absolute path
Target System utl_file_dir Directory List : /usr/tmp
Number of DATA_TOP's on the Target System [1] :
Target System DATA_TOP Directory 1 [/apps/DEV/data] : /u01/DEV/data
Target System RDBMS ORACLE_HOME Directory [/u01/DEV/11.2.0] :
Do you want to preserve the Display [null] (y/n) : n
Target System Display [ebs:0.0] :
Do you want the target system to have the same port values as the source system (y/n) [y] ? : n
Target System Port Pool [0-99] : 0
Checking the port pool 0
RC-50221: Warning: Port Pool 0 is not free. Please check logfile /u01/DEV/11.2.0/appsutil/clone/bin/CloneContext_0329113348.log for conflicts.
Target System Port Pool [0-99] : 0
Checking the port pool 0
done: Port Pool 0 is free
Report file located at /u01/DEV/11.2.0/appsutil/temp/portpool.lst
Complete port information available at /u01/DEV/11.2.0/appsutil/temp/portpool.lst
Creating the new Database Context file from :
/u01/DEV/11.2.0/appsutil/template/adxdbctx.tmp
The new database context file has been created :
/u01/DEV/11.2.0/appsutil/DEV_ebs.xml
Log file located at /u01/DEV/11.2.0/appsutil/clone/bin/CloneContext_0329113348.log
Check Clone Context logfile /u01/DEV/11.2.0/appsutil/clone/bin/CloneContext_0329113348.log for details.
Running Rapid Clone with command:
Running:
perl /u01/DEV/11.2.0/appsutil/clone/bin/adclone.pl java=/u01/DEV/11.2.0/appsutil/clone/bin/../jre mode=apply stage=/u01/DEV/11.2.0/appsutil/clone component=dbTier method=CUSTOM dbctxtg=/u01/DEV/11.2.0/appsutil/DEV_ebs.xml showProgress contextValidated=true
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LC_CTYPE = "UTF-8",
LANG = (unset)
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
Beginning database tier Apply - Sun Mar 29 11:35:27 2015
/u01/DEV/11.2.0/appsutil/clone/bin/../jre/bin/java -Xmx600M -DCONTEXT_VALIDATED=true -Doracle.installer.oui_loc=/u01/DEV/11.2.0/oui -classpath /u01/DEV/11.2.0/appsutil/clone/jlib/xmlparserv2.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/ojdbc6.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/java:/u01/DEV/11.2.0/appsutil/clone/jlib/oui/OraInstaller.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/oui/ewt3.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/oui/share.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/oui/srvm.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/ojmisc.jar oracle.apps.ad.clone.ApplyDBTier -e /u01/DEV/11.2.0/appsutil/DEV_ebs.xml -stage /u01/DEV/11.2.0/appsutil/clone -showProgress
APPS Password : Log file located at /u01/DEV/11.2.0/appsutil/log/DEV_ebs/ApplyDBTier_03291135.log
\ 50% completed RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
ERROR while running Apply...
Sun Mar 29 11:46:03 2015
ERROR: Failed to execute /u01/DEV/11.2.0/appsutil/clone/bin/adclone.pl
Please check logfile.
[oradev@ebs bin]$perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LC_CTYPE = "UTF-8",
LANG = (unset)
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C")
Please check - $ env | grep LC
If its set to LC_CTYPE = UTF-8 then unset or set it to blank value i.e. export LC_CTYPE =
Please see - ODA: oakcli command failed with perl: warning: Setting locale failed. (Doc ID 1526079.1)
-Kj -
RC-50004: Fatal: Error occurred in ApplyDatabase (on installing EBS R12)
Hi,
I need help. When I was re-installing R12 using Windows XP Pro on my personal desktop, I got the following errors:
RC-50004: Fatal: Error occurred in ApplyDatabase
"Cannot execute configure of database using RapidClone"
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process.
Running Database Install Driver for VIS instance
instantiate file:
source : C:\StageR12\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_bingdell.xml
instantiate file:
source : C:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_bingdell.xml
dest : C:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_bingdell.xml
Please let me know what to do. BTW, I am not a DBA.
Also I was able to install R12 before to the same desktop, now I am having problems
re-installing it. I have also cleaned all the traces of the previous install before this re-install.
Thanks in advance,
AmorsoloHi,
RC-50004: Fatal: Error occurred in ApplyDatabase
"Cannot execute configure of database using RapidClone"
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process.This is a generic error, so please check the installation log file for details.
Also I was able to install R12 before to the same desktop, now I am having problems
re-installing it. I have also cleaned all the traces of the previous install before this re-install.Did you follow the steps in (Note: 567507.1 -How to Remove an Oracle E-Business Suite Release 12.x Windows Environment) to clean your previous installation?
Regards,
Hussein -
I am installing R12 on Oracle Enterprise Linux and gettiing above errors.
++++++++ Platform++++++
(I) OS: OEL 4 64-bit update 7 ( installed from DVD if that matters)
[root@arun2 vmware]# uname -a
Linux arun2.devar.com 2.6.9-78.0.0.0.1.ELsmp #1 SMP Fri Jul 25 16:04:35 EDT 2008 x86_64 x86_64 x86_64 GNU/Linux
[root@arun2 vmware]# more /etc/redhat-release
Enterprise Linux Enterprise Linux AS release 4 (October Update 7)
(II) Apps: R12 64-bit (latest available on web released on Jan 13, 2009)
[root@arun2 rapidwiz]# ./RapidWizVersion
Oracle Applications Rapid Install Wizard
Version 12.0.4.6
(c) Copyright 2000-2006 Oracle Corporation. All rights reserved.
(III)H/W: Dell(insiron 530) Intel quad core with 6GB RAM 1TB disk
+++++++ rapidwiz+++++
1) Downloaded x86-64bit ebusiness suit from oracle site
2) unzipped all packages
3) installed recommend Linux rpms
[root@arun2 vmware]# more /tmp/orarpm.2.sh
rpm -Uvh binutils-2.15.92.0.2-25.x86_64.rpm
rpm -Uvh compat-db-4.1.25-9.i386.rpm
rpm -Uvh compat-db-4.1.25-9.x86_64.rpm
rpm -Uvh control-center-2.8.0-12.rhel4.5.x86_64.rpm
rpm -Uvh gcc-3.4.6-10.0.1.x86_64.rpm
rpm -Uvh gcc-c++-3.4.6-10.0.1.x86_64.rpm
rpm -Uvh glibc-2.3.4-2.41.i686.rpm
rpm -Uvh glibc-2.3.4-2.41.x86_64.rpm
rpm -Uvh glibc-devel-2.3.4-2.41.i386.rpm
rpm -Uvh glibc-devel-2.3.4-2.41.x86_64.rpm
rpm -Uvh glibc-common-2.3.4-2.41.x86_64.rpm
rpm -Uvh gnome-libs-1.4.1.2.90-44.2.x86_64.rpm
rpm -Uvh libstdc++-3.4.6-10.0.1.i386.rpm
rpm -Uvh libstdc++-3.4.6-10.0.1.x86_64.rpm
rpm -Uvh libstdc++-devel-3.4.6-10.0.1.i386.rpm
rpm -Uvh libstdc++-devel-3.4.6-10.0.1.x86_64.rpm
rpm -Uvh libgcc-3.4.6-10.0.1.i386.rpm
rpm -Uvh libgcc-3.4.6-10.0.1.x86_64.rpm
rpm -Uvh make-3.80-7.EL4.x86_64.rpm
rpm -Uvh pdksh-5.2.14-30.6.x86_64.rpm
rpm -Uvh setarch-1.6-1.x86_64.rpm
rpm -Uvh sysstat-5.0.5-19.el4.x86_64.rpm
rpm -Uvh xscreensaver-4.18-5.rhel4.14.0.1.x86_64.rpm
rpm -Uvh openmotif21-2.1.30-11.0.1.RHEL4.6.i386.rpm
rpm -Uvh libaio-0.3.105-2.x86_64.rpm
rpm -Uvh libaio-0.3.105-2.i386.rpm
rpm -Uvh libaio-devel-0.3.105-2.x86_64.rpm
Note: some of them were already applied.
4) Changed /etc/sysctl.conf
kernel.shmmax=3221225472
net.ipv4.ip_local_port_range = 2024 65000
kernel.semmsl=256
kernel.semmns=32000
kernel.semopm=100
kernel.semmni=142
kernel.shmall=2097152
kernel.shmmni=4096
kernel.msgmax=8192
kernel.msgmnb=65535
kernel.msgmni=2878
fs.file-max=65536
net.core.rmem_default=262144
net.core.rmem_max=262144
net.core.wmem_default=262144
net.core.wmem_max=262144
Note: rebooted the server couple of times
5) /etc/hosts entry
[root@arun2 vmware]# more /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
192.168.2.5 arun2.devar.com arun2
6) openmotif:
[root@arun2 vmware]# rpm -qa| grep openm
openmotif-2.2.3-10.2.el4
openmotif-devel-2.2.3-10.2.el4
openmpi-libs-1.2.5-5.el4
openmotif-2.2.3-10.2.el4
openmotif21-2.1.30-11.0.1.RHEL4.6
7) added couple of params to /etc/resolv.conf
options attempts:5
options timeout:15
8) Another hostname file
[root@arun2 rapidwiz]# more /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=arun2.devar.com
9) there is no file called /etc/sysconfig/networking/profiles/default/network
[root@arun2 rapidwiz]# ls -l /etc/sysconfig/networking/profiles/default/network
ls: /etc/sysconfig/networking/profiles/default/network: No such file or directory
10) soft and all in /etc/security/limits.conf
# Added for Oracle
hard nofile 65535
soft nofile 4096
hard nproc 16384
soft nproc 2047
11) It fails at 33% of steps 2
12) I find most binaries are crashing. ldd command on binary doesn't show anything is missing.
13) file on libraries looks like this
[oracle6@arun2 ~]$ file /d01/oracle6/MARS10/db/tech_st/10.2.0/lib/libsqlplus.so /d01/oracle6/MARS10/db/tech_st/10.2.0/lib/libclntsh.so.10.1
/d01/oracle6/MARS10/db/tech_st/10.2.0/lib/libsqlplus.so: ELF 64-bit LSB shared object, AMD x86-64, version 1 (SYSV), not stripped
/d01/oracle6/MARS10/db/tech_st/10.2.0/lib/libclntsh.so.10.1: ELF 64-bit LSB shared object, AMD x86-64, version 1 (SYSV), not stripped
It become challenging and frustrating for me. I am really exhausted. Any help would be greately appreciated.
Regards
-Arun
PS: snip of log file:
(a)
| 0% completed
/ 0% completed
- 0% completed
\ 0% completed RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for MARS6 instance
ADX Database Utility
(b) tail -30
/d01/oracle6/MARS6/db/tech_st/10.2.0/appsutil/log/MARS6_arun2/ApplyDatabase_02021441.log
Executable : /d01/oracle6/MARS6/db/tech_st/10.2.0/bin/sqlplus
The log information will be written to
/d01/oracle6/MARS6/db/tech_st/10.2.0/appsutil/log/MARS6_arun2/adcrdb_MARS6.txt
Creating the control file for MARS6_arun2 database ...
exit_code=139
Checking for errors ...
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : arun2
sDbDomain : devar.com
sDbPort : 1537
sDbSid : MARS6
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@arun2.devar.com:1537:MARS6
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=arun2.devar.com)(PORT=1537))(CONNECT_DATA=(SERVICE_NAME=MARS6)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=arun2.devar.com)(PORT=1537))(CONNECT_DATA=(SERVICE_NAME=MARS6.devar.com)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabaseThanks, appreciate your reply. As I mentioned earlier, binaries are crashing. (side note: I am on 10th attempt, so SID=MARS10)
1) There is a connection issue, not sure why.
2) I see, something cored. .... adcrdb.sh: line 107: 30881 Segmentation fault sqlplus /nolog......(full text below)
3) ldd on sqlplus in case required
[oracle6@arun2 bin]$ ldd sqlplus
libsqlplus.so => /d01/oracle6/MARS10/db/tech_st/10.2.0/lib/libsqlplus.so (0x0000002a95557000)
libclntsh.so.10.1 => /d01/oracle6/MARS10/db/tech_st/10.2.0/lib/libclntsh.so.10.1 (0x0000002a9574a000)
libnnz10.so => /d01/oracle6/MARS10/db/tech_st/10.2.0/lib/libnnz10.so (0x0000002a96ae6000)
libdl.so.2 => /lib64/libdl.so.2 (0x00000039f7200000)
libm.so.6 => /lib64/tls/libm.so.6 (0x00000039f7000000)
libpthread.so.0 => /lib64/tls/libpthread.so.0 (0x00000039f7a00000)
libnsl.so.1 => /lib64/libnsl.so.1 (0x00000039feb00000)
libc.so.6 => /lib64/tls/libc.so.6 (0x00000039f6d00000)
/lib64/ld-linux-x86-64.so.2 (0x00000039f6b00000)
4) last part of $ORACLE_HOME/appsutil/log/MARS10_arun2/ApplyDatabase_02061554.log
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : arun2
sDbDomain : devar.com
sDbPort : 1541
sDbSid : MARS10
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@arun2.devar.com:1541:MARS10
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=arun2.devar.com)(PORT=1541))(CONNECT_DATA=(SERVICE_NAME=MARS10)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=arun2.devar.com)(PORT=1541))(CONNECT_DATA=(SERVICE_NAME=MARS10.devar.com)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
adcrdb.sh started at Fri Feb 6 15:54:57 EST 2009
The environment settings are as follows ...
ORACLE_HOME : /d01/oracle6/MARS10/db/tech_st/10.2.0
ORACLE_SID : MARS10
TWO_TASK :
PATH : /d01/oracle6/MARS10/db/tech_st/10.2.0/perl/bin:/d01/oracle6/MARS10/db/tech_st/10.2.0/bin:/usr/bin:/usr/sbin:/d01/oracle6/MARS10/db/tech_st/10.2.0/appsutil/jre/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/bin:/usr/bin:/softwares/appsr12/startCD/Disk1/rapidwiz/unzip/Linux_x64:/usr/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin
LD_LIBRARY_PATH : /d01/oracle6/MARS10/db/tech_st/10.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/d01/oracle6/MARS10/db/tech_st/10.2.0/lib:/usr/dt/lib:/d01/oracle6/MARS10/db/tech_st/10.2.0/ctx/lib
Executable : /d01/oracle6/MARS10/db/tech_st/10.2.0/bin/sqlplus
The log information will be written to
/d01/oracle6/MARS10/db/tech_st/10.2.0/appsutil/log/MARS10_arun2/adcrdb_MARS10.txt
Creating the control file for MARS10_arun2 database ...
exit_code=139
Checking for errors ...
.end std out.
/d01/oracle6/MARS10/db/tech_st/10.2.0/appsutil/install/MARS10_arun2/adcrdb.sh: line 107: 30881 Segmentation fault sqlplus /nolog @/d01/oracle6/MARS10/db/tech_st/10.2.0/appsutil/install/MARS10_arun2/adcrdbclone.sql "so" "$S_RDBMS_VERS"
egrep: /d01/oracle6/MARS10/db/tech_st/10.2.0/appsutil/log/MARS10_arun2/adcrdb_MARS10.txt: No such file or directory
.end err out.
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase -
Hi Mr.Hussain,
Can you please guide me how to solve this error,
i am trying to install oracle EBS R12.1.1 on windows server 2003, i am following your document, installation of EBS R12.1 in windows server 2003 SP2
i did stage everything going right, even i did md5sums for the extracted file of EBS R12 folder.
i stated installation, even installation done perfectly at the end of installation 2 Command Prompt windows appear and stopped, i try to open log file from oracle installation folder, i got this message at the end of log file
3% completed RC-50004: Fatal: Error occurred in ApplyAppsTechStack:
RC-50013: Fatal: Failed to instantiate driver c:\oracle\PROD\apps\tech_st\10.1.3\appsutil\driver\regclone.drv
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if 1 == 0 goto :REG_OK
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo Cannot execute registration of Applications Techstack
Cannot execute registration of Applications Techstack
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if "" == "TRUE" goto :INSIAS_OK
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running APPL_TOP Install Driver for PROD instance
can you please guide me how to solve this error,This is a generic error so you would need to check the installation log files for details about the error.
Please see if (Rapidwiz 12.1.1 Fails To Execute Ouicli.Pl During Apps 10.1.3 Techstack Autoconfig (Doc ID 1328464.1)) is applicable.
Thanks,
Hussein -
RC-50004: Fatal: Error occurred in ApplyDBTier during adcfgclone.pl
Hi,
While running adcfgclone.pl, I am encountering <RC-50004: Fatal: Error occurred in ApplyDBTier> message.
Full log is
- >
RC-50004: Fatal: Error occurred in ApplyDBTier:
StackTrace -
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
at java.lang.reflect.Constructor.newInstance(Unknown Source)
at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:67)
at java.lang.Thread.run(Unknown Source)
Caused by: java.lang.NoClassDefFoundError: oracle/jdbc/OracleDriver
at oracle.apps.ad.util.DBUtil.registerDriver(DBUtil.java:153)
at oracle.apps.ad.util.DBUtil.<init>(DBUtil.java:102)
at oracle.apps.ad.tools.configuration.FileSysDBCtxMerge.getDBConnection(FileSysDBCtxMerge.java:802)
at oracle.apps.ad.tools.configuration.FileSysDBCtxMerge.initializeParams(FileSysDBCtxMerge.java:150)
at oracle.apps.ad.tools.configuration.FileSysDBCtxMerge.setParams(FileSysDBCtxMerge.java:131)
at oracle.apps.ad.context.CtxValueMgt.mergeCustomInFiles(CtxValueMgt.java:1789)
at oracle.apps.ad.context.CtxValueMgt.processCtxFile(CtxValueMgt.java:1608)
at oracle.apps.ad.clone.ApplyDBTechStack.runCVM(ApplyDBTechStack.java:646)
at oracle.apps.ad.clone.ApplyDBTechStack.runAutoConfig(ApplyDBTechStack.java:699)
at oracle.apps.ad.clone.ApplyDBTechStack.doConf(ApplyDBTechStack.java:369)
at oracle.apps.ad.clone.ApplyDBTechStack.doApply(ApplyDBTechStack.java:397)
at oracle.apps.ad.clone.ApplyDBTechStack.<init>(ApplyDBTechStack.java:313)
at oracle.apps.ad.clone.ApplyDBTier.<init>(ApplyDBTier.java:104)
... 6 more
Caused by: java.lang.ClassNotFoundException: oracle.jdbc.OracleDriver
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
... 19 more
ERROR while running Apply...
Wed Oct 19 10:35:53 2011
ERROR: Failed to execute /d03/oracle/sid/db/tech_st/11.2.0/appsutil/clone/bin/adclone.pl
< -
Can someone help me to resolve this issue?
I think this is different than the similar errors in Troubleshooting RapidClone issues with Oracle Applications R12 [ID 603104.1]...Yes, I have 11gR2 database at the moment.
To make sure... Are you referring to the target database system?
Now, I am still in the middle of cloning, and when I tried to run sqlplus I get the error saying that <SP2-0750: You may need to set ORACLE_HOME to your Oracle software directory>.
So yes, failure occurred in the early stage of running adcfgclone.pl script.
I took some more logs before RC-5004 error message.
->
Beginning database tier Apply - Wed Oct 19 10:35:14 2011
APPS Password : Log file located at /d03/oracle/SID/db/tech_st/11.2.0/appsutil/log/CONTEXT/ApplyDBTier_10191035.log
| 0% completed NON-COMPLIANT: /d03/oracle/SID/db/tech_st/11.2.0//oraInst.loc does not point to an inventory inside the current ORACLE_HOME
Rapid Clone only supports oraInst.loc at that location if its content points to an inventory inside the same ORACLE_HOME
Please make the necessary changes to the following file:
/d03/oracle/SID/db/tech_st/11.2.0//oraInst.loc
running OUI CLI home cloning:
/d03/oracle/SID/db/tech_st/11.2.0/oui/bin/runInstaller -clone -silent -force -waitForCompletion -invPtrLoc /etc/oraInst.loc ORACLE_HOME=/d03/oracle/SID/db/tech_st/11.2.0 ORACLE_BASE=/d03/oracle/SID/db/tech_st/11.2.0 ORACLE_HOME_NAME=SID_db112_RDBMS
\ 0% completed
RC-50004: Fatal: Error occurred in ApplyDBTier:
<-
In addition, oraInst.loc is existing in the target ORACLE_HOME directory, owned by the target oracle user.
oraInst.loc has
inventory_loc=/oracle/oraInventory
where oraInventory has the right permission drwxrwx--- -
RC-50004: Fatal: Error occurred in ApplyAppsTier
Hi,
We are on 12.0.4 on Microsoft windows 2003 server.
and trying to do cloning, Database cloning is succesfull, but while doing application cloning we are getting the above error at the stage of 73%, the error message is as follows..
===========
Log file located at c:\clone\inst\apps\clone_lenovo-4\admin\log\ApplyAppsTier_11
081303.log
\ 73% completed
RC-50004: Fatal: Error occurred in ApplyAppsTier:
StackTrace -
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstruct
orAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingC
onstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:67)
at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.NoSuchMethodError: oracle.apps.ad.autoconfig.InstantiateFil
e.writeReport(Ljava/util/Vector;Loracle/apps/ad/util/LogFile;I)V
at oracle.apps.ad.clone.ApplyApplTop.checkAutoConfigErr(ApplyApplTop.jav
a:590)
at oracle.apps.ad.clone.ApplyApplTop.runAutoConfig(ApplyApplTop.java:558
at oracle.apps.ad.clone.ApplyApplTop.doConf(ApplyApplTop.java:339)
at oracle.apps.ad.clone.ApplyApplTop.doApply(ApplyApplTop.java:382)
at oracle.apps.ad.clone.ApplyApplTop.<init>(ApplyApplTop.java:267)
at oracle.apps.ad.clone.ApplyAppsTier.<init>(ApplyAppsTier.java:105)
... 6 more
ERROR while running Apply...
Sat Nov 8 13:09:50 2008
ERROR: Failed to execute C:\CLONE\apps\apps_st\comn\clone\bin\adclone.pl
Please check logfile.
==========================
after that we have run th autoconfig,
The autoconfig is erroring out in adsvalsn.cmd
==
adsvalsn.cmd INSTE8_APPLY 1
=========
Script Success, Applications Context update complete.
Configuring templates from all of the product tops...
Configuring AD_TOP........COMPLETED
Configuring FND_TOP.......COMPLETED
Configuring ICX_TOP.......COMPLETED
Configuring IEO_TOP.......COMPLETED
Configuring BIS_TOP.......COMPLETED
Configuring AMS_TOP.......COMPLETED
Configuring CCT_TOP.......COMPLETED
Configuring WSH_TOP.......COMPLETED
Configuring CLN_TOP.......COMPLETED
Configuring OKE_TOP.......COMPLETED
Configuring OKL_TOP.......COMPLETED
Configuring OKS_TOP.......COMPLETED
Listener Log File c:\clone\inst\apps\clone_lenovo-4\logs\ora\10.1.2\netw
ork\apps_clone.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=LENOVO-4)(PORT=1626)))
Services Summary...
Service "FNDFS" has 1 instance(s).
Instance "FNDFS", status UNKNOWN, has 1 handler(s) for this service...
Service "FNDSM" has 1 instance(s).
Instance "FNDSM", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
adalnctl.cmd exiting with status 0
OpenService failed
c:\clone\apps\apps_st\appl\ad\12.0.0\bin\adsstart.exe OracleCLONE_lenovo-4_TOOLS
TNSListenerAPPS_clone auto failed
adsvalsn.cmd exiting with status 1
ERRORCODE = 1 ERRORCODE_END
.end std out.
.end err out.
==============================
we checked the autoconfig FAQ 218089.1
The script adsvalsn.cmd fails when I run AutoConfig. How do I resolve this issue?
Answer:
Check in your Service Control Panel to see if the 806 listener service is set to automatic or manual.
If your service is set to automatic, then you hit a known issue, that can be ignored. You can use the following workaround to resolve the issue:
copy %AD_TOP%\bin\adstart.exe %COMMON_TOP%\util\SrvStart.exe
[top]
Done the workaround as well as the services is "manual", still the same issue.
=================================
We ignored the error and tried to start the application..
The forms are not opening..
FRM-92101: There was a failure in the Forms Server during startup.This could happen due to invalid configuration.
Please look into the web-server log file for details. Details.... Java Exception:
oracle.forms.net.ConnectionException: Forms session <3> failed during startup: no response from runtime process
at oracle.forms.net.ConnectionException.createConnectionException(Unknown Source)
======
followed the note Note:465926.1 to resolve the issue..
We tried to run
"make -f ins_forms.mk install " from 10.1.2 home/lib but we are finding the file in that location.
Can anybody please guide us
Regards
VasuHi HSAWWAN,
Alias APPS_clone
Version TNSLSNR for 32-bit Windows: Version 10.1.0.5.0 - Production
Start Date 08-NOV-2008 22:07:31
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\clone\inst\apps\CLONE_lenovo-4\ora\10.1.2\network\admin\listener.ora
Listener Log File c:\clone\inst\apps\clone_lenovo-4\logs\ora\10.1.2\network\apps_clone.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=LENOVO-4)(PORT=1626)))
Services Summary...
Service "FNDFS" has 1 instance(s).
Instance "FNDFS", status UNKNOWN, has 1 handler(s) for this service...
Service "FNDSM" has 1 instance(s).
Instance "FNDSM", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
adalnctl.cmd exiting with status 0
OpenService failed
c:\clone\apps\apps__st\appl\ad\*12.0.0\*bin\adsstart.exe OraclePROD_erpsahara_TOOLSTNSListenerAPPS_clone* auto* failed_adsvalsn.cmd exiting with status 1
======
In this It is taking the PRODUCTION "OraclePROD_erpsahara_TOOLSTNSListenerAPPS_clone" pl sugest how to rectify it..
Regards
Vasu -
RC-50004: Fatal: Error occurred in StageDBTier
Can anybody help on this issue Please.
We are using 11.5.10.2 applications with 10.2.0.4 database and trying to clone the Applications, got the error while doing adpreclone.
$ perl adpreclone.pl dbTier
Running Rapid Clone with command...
perl /ul01/app/applmgr/lasrt/ad/11.5.0/bin/adclone.pl java=/opt/java1.4 mode=stage stage=/ul02/app/common/lasrt/clone component=appsTier method=CUSTOM appctx=/ul01/app/applmgr/lasrt/admin/lasrt_fiapd2.xml showProgress
Beginning application tier Stage - Thu Dec 2 15:49:02 2010
Log file located at /ul01/app/applmgr/lasrt/admin/lasrt_fiapd2/log/StageAppsTier_12020349.log
RC-50004: Fatal: Error occurred in StageDBTier:
the error is..
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:68)
at java.lang.Thread.run(Thread.java:534)
Caused by: java.lang.NoSuchMethodError: oracle.apps.ad.util.SystemCheck.suCopyDirectory(Ljava/lang/String;Ljava/lang/String;J)Z
at oracle.apps.ad.clone.util.CreateCloningStage.createBaseArea(CreateCloningStage.java:324)
at oracle.apps.ad.clone.util.CreateCloningStage.<init>(CreateCloningStage.java:181)
at oracle.apps.ad.clone.util.CreateCloningStage.<init>(CreateCloningStage.java:140)
at oracle.apps.ad.clone.util.CreateCloningStage.<init>(CreateCloningStage.java:124)
at oracle.apps.ad.clone.StageDBTechStack.doStage(StageDBTechStack.java:313)
at oracle.apps.ad.clone.StageDBTechStack.<init>(StageDBTechStack.java:289)
at oracle.apps.ad.clone.StageDBTier.<init>(StageDBTier.java:211)
Verified version of Systemcheck==== 115.27 on Database side
As per previous blogs need to apply 6372396 patch, Please confirm any prereq patches need to be applied or not.
Does this patch changes any custum programes.
What changes does this patch makes.
Please provide the detail procedure to fix this issue.
Thanks,
Dheeru.Hi,
Please see (RC-50004: Caused by: java.lang.NoSuchMethodError: oracle.apps.ad.util.SystemCheck.suCopyDirectory(Ljava/lang/String;Ljava/lang/String;J) [ID 746025.1]).
For (Patch:6372396 TXK AUTOCONFIG AND TEMPLATES ROLLUP PATCH S (APRIL/MAY 2008)), it is an AutoConfig template patch and it should not tocuh your custom programs.
Please note that this patch was replaced with (Patch 9535311 - TXK AUTOCONFIG AND TEMPLATES ROLLUP PATCH U).
Thanks,
Hussein -
DbTier:RC-50004 Error occurred in ApplyDatabase:help me plzzzzzzzzzz
HI,
Am on 11.5.10.2
DB 10gR2
OS Red Hat Enterprise Linux AS release 4 (Nahant Update 6)
When am trying to clone dbtier am facing this error :
Beginning database tier Apply - Wed Jun 22 14:00:53 2011
Log file located at /stageDB/proddb/10.2.0/appsutil/log/PROD_rofdbs5/ApplyDBTier_06221400.log
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Before taking the source backup :
i did the following
1. Autoconfig - completed successfully.
2.preclone
3.Shutdown database (normal, innmediate) & stop listener
4.Copy the soutce to target using scp -r root@hostname:/stageDB
log file
vi /stageDB/proddb/10.2.0/appsutil/log/PROD_rofdbs5/ApplyDBTier_06221400.logLoading ORACLE_HOME environment from /stageDB/proddb/10.2.0
Logfile: /stageDB/proddb/10.2.0/appsutil/log/PROD_rofdbs5/06221400/NetServiceHandler.log
Error generating tnsnames.ora from the database, temperory tnsnames.ora will be generated using templates
Instantiating templates
tnsnames.ora instantiated
listener.ora instantiated
adgentns.pl exiting with status 25600
ERRORCODE = 25600 ERRORCODE_END
log file
/stageDB/proddb/10.2.0/appsutil/log/PROD_rofdbs5/06221400/NetServiceHandler.logClasspath : /stageDB/proddb/10.2.0/jdk/jre/lib/rt.jar:/stageDB/proddb/10.2.0/jdk/lib/dt.jar:/stageDB/proddb/10.2.0/jdk/lib/tools.jar:/stageDB/proddb/10.2.0/jdbc/lib/ojdbc14.jar:/stageDB/proddb/10.2.0/appsutil/java/xmlparserv2.zip:/stageDB/proddb/10.2.0/appsutil/java:/stageDB/proddb/10.2.0/jlib/netcfg.jar:/stageDB/proddb/10.2.0/jlib/ldapjclnt10.jar
===============================================================================
NetServiceHandler 115.54 started for rofdbs5 at Wed Jun 22 14:00:59 GST 2011
===============================================================================
[ Context Information ]
Host : rofdbs5
Domain : reyamidbs.com
Out Dir : /stageDB/proddb/10.2.0/appsutil/out/PROD_rofdbs5/06221400
Tier Type : DATABASE TIER
Getting connection...
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : rofdbs5
sDbDomain : reyamidbs.com
sDbPort : 1521
sDbSid : PROD
sDbUser : apps
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@rofdbs5.reyamidbs.com:1521:PROD
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=rofdbs5.reyamidbs.com)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=PROD)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=rofdbs5.reyamidbs.com)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=PROD.reyamidbs.com)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
Could not get connection to the database.
Exiting with status 100 to instantiate the tnsnames.ora template
Creation of Directory - /stageDB/proddb/10.2.0/network/admin/PROD_rofdbs5 Succeeded.
instantiate file:
source : /stageDB/proddb/10.2.0/appsutil/template/ad8itns.ora
dest : /stageDB/proddb/10.2.0/network/admin/PROD_rofdbs5/tnsnames.ora
AutoConfig is exiting with status 0
instantiate file:
source : /stageDB/proddb/10.2.0/appsutil/template/ad8ilsnr.ora
dest : /stageDB/proddb/10.2.0/network/admin/PROD_rofdbs5/listener.ora
AutoConfig is exiting with status 0
adgentns.pl exiting with status 25600
ERRORCODE = 25600 ERRORCODE_END
Thanks
Edited by: 843272 on Jun 22, 2011 3:21 AM
Edited by: 843272 on Jun 22, 2011 5:55 AMLog file located at /stageDB/proddb/10.2.0/appsutil/log/PROD_rofdbs5/ApplyDBTier_06221400.log
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failedThis error indicates that the database was not created successfully.
Rapid Clone Failed While Running "Adcfgclone.pl dbTier": ORA-01194 and RC-00118 [ID 375389.1]
Adcfgclone.pl DBTier is failing with error for dbms_backup_restore.zeroDbid(0) [ID 361157.1]
Thanks,
Hussein -
Error when applyin adcfgclone on dbtier RC-50004: FATAL ERROR RC-50014
I have performed the following steps several times and only two times it was successful..rest of the time,it gave me the following error
Does anyone know how to resolve this or whats the problem behind this
Below are the steps i perform followed by the log file contents too..
Thanks
[oracle@t2 ~]$ cd /d01/oracle/test2/db/tech_st/10.2.0/appsutil/clone/bin
[oracle@t2 bin]$ ls
adcfgclone.pl adchkutl.sh adclonectx.pl adclone.pl
[oracle@t2 bin]$ ./adcfgclone.pl dbTier
Using Java from /d01/oracle/test2/db/tech_st/10.2.0/appsutil/clone/bin/../jre
Enter the APPS user password:
JDBCCLASSES = /d01/oracle/test2/db/tech_st/10.2.0/appsutil/clone/jlib/ojdbc14.jar
XMLPCLASSES = /d01/oracle/test2/db/tech_st/10.2.0/appsutil/clone/jlib/xmlparserv2.jar
LOCAL_CPATH = /d01/oracle/test2/db/tech_st/10.2.0/appsutil/clone/jlib/java:/d01/oracle/test2/db/tech_st/10.2.0/appsutil/clone/jlib/xmlparserv2.jar:/d01/oracle/test2/db/tech_st/10.2.0/appsutil/clone/jlib/ojdbc14.jar
First Creating a new context file for the cloned system.
The program is going to ask you for information about the new system:
oracle
= oracle
dba
= dba
Running:
/d01/oracle/test2/db/tech_st/10.2.0/appsutil/clone/bin/../jre/bin/java -Xmx600M -cp /d01/oracle/test2/db/tech_st/10.2.0/appsutil/clone/jlib/java:/d01/oracle/test2/db/tech_st/10.2.0/appsutil/clone/jlib/xmlparserv2.jar:/d01/oracle/test2/db/tech_st/10.2.0/appsutil/clone/jlib/ojdbc14.jar oracle.apps.ad.context.CloneContext -e /d01/oracle/test2/db/tech_st/10.2.0/appsutil/clone/bin/../context/db/CTXORIG.xml -validate -pairsfile /tmp/adpairsfile.lst -stage /d01/oracle/test2/db/tech_st/10.2.0/appsutil/clone 2> /tmp/adcfgclone.err; echo $? > /tmp/adcfgclone.resEnter the APPS password : apps
Log file located at /d01/oracle/test2/db/tech_st/10.2.0/appsutil/clone/bin/CloneContext_06051732.log
Provide the values required for creation of the new Database Context file.
Target hostname (virtual or normal) [t2]:
Target instance is a Real Application Cluster (RAC) instance (y/n) [n]:
Target System database name:test2
Target system base directory for source homes:/d01/oracle/test2
Target system utl_file accessible directories list:/usr/tmp
Number of DATA_TOP's on the target system [4]:1
Target system DATA_TOP 1:/d01/oracle/test2/db/apps_st/data
Target system RDBMS ORACLE_HOME directory:/d01/oracle/test2/db/tech_st/10.2.0
Do you want to preserve the Display set to 130.35.33.102:111.0 (y/n) [y] ?:
Do you want the the target system to have the same port values as the source system (y/n) [y] ?:
Complete port information available at /d01/oracle/test2/db/tech_st/10.2.0/appsutil/clone/bin/out/test2_t2/portpool.lst
Backing up /d01/oracle/test2/db/tech_st/10.2.0/appsutil/test2_t2.xml to /d01/oracle/test2/db/tech_st/10.2.0/appsutil/test2_t2.xml.bak
Creating the new Database Context file from :
/d01/oracle/test2/db/tech_st/10.2.0/appsutil/template/adxdbctx.tmp
The new database context file has been created :
/d01/oracle/test2/db/tech_st/10.2.0/appsutil/test2_t2.xml
Log file located at /d01/oracle/test2/db/tech_st/10.2.0/appsutil/clone/bin/CloneContext_06051732.log
Check logfile /d01/oracle/test2/db/tech_st/10.2.0/appsutil/clone/bin/CloneContext_06051732.log for details.
Running Rapid Clone with command:
perl /d01/oracle/test2/db/tech_st/10.2.0/appsutil/clone/bin/adclone.pl java=/d01/oracle/test2/db/tech_st/10.2.0/appsutil/clone/bin/../jre mode=apply stage=/d01/oracle/test2/db/tech_st/10.2.0/appsutil/clone component=dbTier method=CUSTOM dbctxtg=/d01/oracle/test2/db/tech_st/10.2.0/appsutil/test2_t2.xml showProgress contextValidated=true
Running:
perl /d01/oracle/test2/db/tech_st/10.2.0/appsutil/clone/bin/adclone.pl java=/d01/oracle/test2/db/tech_st/10.2.0/appsutil/clone/bin/../jre mode=apply stage=/d01/oracle/test2/db/tech_st/10.2.0/appsutil/clone component=dbTier method=CUSTOM dbctxtg=/d01/oracle/test2/db/tech_st/10.2.0/appsutil/test2_t2.xml showProgress contextValidated=true
XMLPARSER: /d01/oracle/test2/db/tech_st/10.2.0/appsutil/clone/jlib/xmlparserv2.jar
JDBC: /d01/oracle/test2/db/tech_st/10.2.0/appsutil/clone/jlib/ojdbc14.jar
CLASSPATH: /d01/oracle/test2/db/tech_st/10.2.0/appsutil/clone/jlib/xmlparserv2.jar:/d01/oracle/test2/db/tech_st/10.2.0/appsutil/clone/jlib/ojdbc14.jar:/d01/oracle/test2/db/tech_st/10.2.0/appsutil/clone/jlib/java:/d01/oracle/test2/db/tech_st/10.2.0/appsutil/clone/jlib/oui/OraInstaller.jar:/d01/oracle/test2/db/tech_st/10.2.0/appsutil/clone/jlib/oui/ewt3.jar:/d01/oracle/test2/db/tech_st/10.2.0/appsutil/clone/jlib/oui/share.jar:/d01/oracle/test2/db/tech_st/10.2.0/appsutil/clone/jlib/oui/srvm.jar:/d01/oracle/test2/db/tech_st/10.2.0/appsutil/clone/jlib/ojmisc.jar
OUI CLASSPATH: /d01/oracle/test2/db/tech_st/10.2.0/appsutil/clone/jlib/oui/OraInstaller.jar:/d01/oracle/test2/db/tech_st/10.2.0/appsutil/clone/jlib/oui/ewt3.jar:/d01/oracle/test2/db/tech_st/10.2.0/appsutil/clone/jlib/oui/xmlparserv2.jar:/d01/oracle/test2/db/tech_st/10.2.0/appsutil/clone/jlib/oui/share.jar:/d01/oracle/test2/db/tech_st/10.2.0/appsutil/clone/jlib/oui/srvm.jar:/d01/oracle/test2/db/tech_st/10.2.0/appsutil/clone/jlib/ojmisc.jar:/d01/oracle/test2/db/tech_st/10.2.0/appsutil/clone/jlib/xmlparserv2.jar:/d01/oracle/test2/db/tech_st/10.2.0/appsutil/clone/jlib/ojdbc14.jar:/d01/oracle/test2/db/tech_st/10.2.0/appsutil/clone/jlib/java
Setting LD_LIBRARY_PATH to /d01/oracle/test2/db/tech_st/10.2.0/appsutil/clone/oui/lib/linux
Beginning database tier Apply - Thu Jun 5 17:33:42 2008
/d01/oracle/test2/db/tech_st/10.2.0/appsutil/clone/bin/../jre/bin/java -Xmx600M -DCONTEXT_VALIDATED=true -Doracle.installer.oui_loc=/d01/oracle/test2/db/tech_st/10.2.0/oui -classpath /d01/oracle/test2/db/tech_st/10.2.0/appsutil/clone/jlib/xmlparserv2.jar:/d01/oracle/test2/db/tech_st/10.2.0/appsutil/clone/jlib/ojdbc14.jar:/d01/oracle/test2/db/tech_st/10.2.0/appsutil/clone/jlib/java:/d01/oracle/test2/db/tech_st/10.2.0/appsutil/clone/jlib/oui/OraInstaller.jar:/d01/oracle/test2/db/tech_st/10.2.0/appsutil/clone/jlib/oui/ewt3.jar:/d01/oracle/test2/db/tech_st/10.2.0/appsutil/clone/jlib/oui/share.jar:/d01/oracle/test2/db/tech_st/10.2.0/appsutil/clone/jlib/oui/srvm.jar:/d01/oracle/test2/db/tech_st/10.2.0/appsutil/clone/jlib/ojmisc.jar oracle.apps.ad.clone.ApplyDBTier -e /d01/oracle/test2/db/tech_st/10.2.0/appsutil/test2_t2.xml -stage /d01/oracle/test2/db/tech_st/10.2.0/appsutil/clone -showProgress
APPS Password : Log file located at /d01/oracle/test2/db/tech_st/10.2.0/appsutil/log/test2_t2/ApplyDBTier_06051733.log
\ 50% completed RC-50004: Fatal: Error occurred in ApplyDatabase:
RC-50014: Fatal: Execution of AutoConfig was failed
ERROR while running Apply...
Thu Jun 5 17:38:53 2008
ERROR: Failed to execute /d01/oracle/test2/db/tech_st/10.2.0/appsutil/clone/bin/adclone.pl
Please check logfile.
[oracle@t2 bin]$
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1077936128 bytes
Fixed Size 2076584 bytes
Variable Size 427819096 bytes
Database Buffers 633339904 bytes
Redo Buffers 14700544 bytes
Control file created.
alter database open resetlogs
ERROR at line 1:
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: '/d01/oracle/test3/db/apps_st/data/system01.dbf'
alter tablespace TEMP1 add tempfile '/d01/oracle/test3/db/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP2 add tempfile '/d01/oracle/test3/db/apps_st/data/temp02.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "test3.luckyerp"
ERROR at line 1:
ORA-01109: database not open
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1077936128 bytes
Fixed Size 2076584 bytes
Variable Size 427819096 bytes
Database Buffers 633339904 bytes
Redo Buffers 14700544 bytes
Database mounted.
PL/SQL procedure successfully completed.
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1077936128 bytes
Fixed Size 2076584 bytes
Variable Size 427819096 bytes
Database Buffers 633339904 bytes
Redo Buffers 14700544 bytes
Control file created.
alter database open resetlogs
ERROR at line 1:
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: '/d01/oracle/test3/db/apps_st/data/system01.dbf'
alter tablespace TEMP1 add tempfile '/d01/oracle/test3/db/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP2 add tempfile '/d01/oracle/test3/db/apps_st/data/temp02.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "test3.luckyerp"
ERROR at line 1:
ORA-01109: database not openbut what wil be the remaining steps of clone then..?If you have not done any changes recently on your source nodes (add a tablespace/database, applied patches, add new forms/reports, ..etc), then do the following:
- Make sure you shutdown the source instance properly before copying the file to the target node.
- Configure the target system database server (run the following as oracle user):
$ cd <RDBMS ORACLE_HOME>/appsutil/clone/bin
$ perl adcfgclone.pl dbTier - Configure the target system application server (run the following as applmgr user):
$ cd <COMMON_TOP>/clone/bin
$ perl adcfgclone.pl appsTierNote: 230672.1 - Cloning Oracle Applications Release 11i with Rapid Clone
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=230672.1 -
Need help. I have my pilot lync 2013 pool up (in coexistence with 2010 production environment) and can log into Lync 2013 environment with a lync 2010 client but am not able to with a lync 2013 client. It just prompts for password but will not
take it. I'm sseeing this on my front end server multiple times:
A fatal error occurred while creating an SSL client credential. The internal error state is 10011.
Came across this http://www.logicspot.net/index.php?id=50 and tried disabling TLS 1.2, which I did and verified but yet the issue still exists.
All my certs are good coming from internal CA. My signin logs show below but keep in mind, this works just fine if using a 2010 lync client to my lync 2013 servers. Issue only occurs when trying to connect using a lync 2013 client.
1 Login: FAIL (hr = 0x1)
this request needs authentication, trying webticket from: https://domain.com/WebTicket/WebTicketService.svc
1.1 Get-NewWebTicket: FAIL (hr = 0x1)
CLogonCredentialManager::QueryForSpecificCreds() Credential user 0x069B64A0 id=15 querying for specific credentials, credSuccess=2, targetName=Microsoft_OC1:[email protected]:specific:LAD:1
1.1.1 ExecuteWithMetadataInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.2 ExecuteWithWindowsOrNoAuthInternal: PASS
1.1.3 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.4 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Discovery task(0A4FF830) sent to URL http://domain.com completed with hr=0x80f10045
1.1.5 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.6 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
CLogonCredentialManager::QueryForSpecificCreds() Credential user 0x069B64A0 id=15 querying for specific credentials, credSuccess=2, targetName=Microsoft_OC1:[email protected]:specific:LAD:1
RichHi,
Please check the server role and Web Services for Internet Information Services (IIS) are set correctly.
For the detailed IIS configuration, please check:
http://technet.microsoft.com/en-us/library/gg412871.aspx
As Lync client 2013 attempt to query in order to perform autodiscover of the Lync registration server. First
lyncdiscoverinternal.<sipdomain> Host (A) record and then
lyncdiscover.<sipdomain> Host (A) record. If neither of these records are resolvable then the legacy DNS SRV and A record fall-back process is used. So make sure you have add the two A record in DNS server.
More details:
http://blog.schertz.name/2012/12/lync-2013-client-autodiscover/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
Hi,
We are getting the following error when running our SSIS packages on Microsoft SQL Server 2012 R2 on Windows Server 2008 R2 SP1:
Error: 4014, Severity:20, State: 11. A fatal error occurred while reading the input stream from the network. The session will be terminated (input error: 109, output error: 0)
SQL Server Data Tools and SQL Server Database Engine reside on the same server.
We tried the following:
Disabling TCP Chimney Offload
Installed Windows Server 2008 SP1
Splitting our SSIS code into multiple steps so it is not all one large continuous operation
The error occurs during a BulkDataLoad task.
Other options we are investigating with the engineering team (out-sourced, so delayed responses):
Firewall configurations (everything is local, so this should not make a difference)
Disabling the anti-virus scanner
Are there other things we can try?
Any insight is greatly appreciated.
Thanks!Hi HenryKwan,
Based on the current information, the issue can be caused by many reasons. Please refer to the following tips:
Install the latest hotfix based on your SQL Server version. Ps: there is no SQL Server 2012 R2 version.
Change the MaxConcurrentExecutables property from -1 to another one based on the MAXDOP. For example, 8.
Set "RetainSameConnection" Property to FALSE on the all the connection managers.
Reference:
https://connect.microsoft.com/SQLServer/feedback/details/774370/ssis-packages-abort-with-unexpected-termination-message
If the issue is still existed, as Jakub suggested, please provide us more information about this issue.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support
Maybe you are looking for
-
How to zoom in with Adobe Flash Player 12.0.0.77
I like to play a game on Neopets called Destruct-O-Match. Until two days ago, I could zoom in on the game (make it bigger) by right clicking with my mouse. Now that option no longer exists, so the game is too small to see comfortably. How do I zoo
-
[SOLVED] Xscreensaver-command -lock no longer working
As of yesterday afternoon (probably after the upgrade to 5.13-1), I have been unable to lock my monitor using xscreensaver. The screen fades to black, only to jump back to my desktop, and xscreensaver reporting a crash. I honestly can't see a reaso
-
Can't edit iPhone 4 photos in iPhoto
I posted something similar under iPhoto then realized it might be an iPhone 4 problem. Suggestions would be appreciated: We are unable to edit photos in iPhoto, but ONLY those photos taken with new iPhone 4. We can upload them to iPhoto, but when we
-
Why have my version names disappeared from Browser view?
I know there is an easy solution to this because it has happened to me before. In the Browser viewer in Aperture 3, I can usually see the Version name under each thumbnail. The Version names have disappeared and I can't remember how to get them back.
-
Hi I have setup a RAP and MAP with AIR-CAP1602E-E-K9 all working fine. I need to bridge the connection so that i can attach an switch on the MAP AP Both AP's Ethernet connections are set to bridge but i cannot reach the switch on the MAP AP i can rea