RC1 Task Manager - Users - Connect

I am not able to connect to a user account from within Task Manager like I could in XP SP2.
Step:
Open task manager
Select Users tab
Select a different user currently running on machine
Right-click and select connect
Enter password.
I get the error message:
Unhandled error occured while connecting. #5 Access is denied.
This occurs if I am an administrator or a user

Today i faced the issue and resolved it ....
you need to go to the process tab and select show processes from all users. You will then get the administrator authenticate window. After you authenticate you will be able to switch users

Similar Messages

  • Task Manager User

    Hello,
    I have created users to assign user tasks.
    This were the steps I did:
    application server -> OC4J_BPEL -> administration -> security.
    I have added a group and four users.
    Questions:
    1) Is this the right way to do it?!
    2) Where do I configure user properties? Title, E-mail address phone number and so on? Do I have to do it in flow? Can I do it in the OC4j_BPEL?
    3) do I need Identity management installed?
    Thanks
    Gonçalo Ribeiro

    Hello,
    I have found the user-properties.xml in oraHome/integration/orabpel/system/services/config/
    I have created a new entry with a user that already had been created by me.
    Questions:
    1) Do I have to edit the file add a new entry manually?
    2) the user has to be previous created in the OC4J like I explained in the previous post?
    Thanks
    Gonçalo Ribeiro

  • Firefox will not open. Hangs at "connecting" stage. Non-responsive even to process shut-down via task manager.

    Starting yesterday, Firefox will not open at all. It hangs at the "connecting stage." For hours. It will not shut down even using the task manager for applications or processes, and it locks up virtually every other application. I thought I managed to save an open Word document yesterday - it looked like a slow, but normal save during the Firefox hang, but the document was empty when I restarted my computer.
    Even though my machine is not pentium 4 based, I tried starting using the Windows XP/M configuration, I downloaded and re-installed (over the top of) the existing version, I verified that no Mozilla processes were running before trying to start Mozilla, and tried creating a new profile. Absolutely no success. Every time (of the dozens) I have tried to start Firefox I have had to force a hard shut-down to get out of the application. I have now unpinned Firefox from my task bar because I keep forgetting and hitting it by reflex.
    I am running version 11.0 (at least that is what I just downloaded - I am not positive what I was running yesterday). My system is Windows 7 Home Premium, Intel Core i3, 2.4 gHz, 4 GB RAM, 64 bit OS.
    Next option is to restore to a previous version. If that doesn't work, I will uninstall and start over from scratch.

    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    *http://kb.mozillazine.org/Browser_will_not_start_up

  • If I bring up fire fox and not connected to internet I get and error when I shut it down and connect to the internet and bring firefox up it will not open unless I remove the prosses in task manager is this normal

    when shuting down Firefox after not being connected to the internet the processes remains and I have to go into task manager and remove the process manually or I get a message that Firefox is already started and it will not come up

    Sofar I have found (off internet),
    A)that if you go into sleep mode, the wifi shuts down or powers down.
    B)sleep mode must be disabled in order for wifi to continue.
    C)you can check this by going into wifi and seeing the iphone every 20 seconds or so looking.
    D)as far as handoff ,I still not to sure but I think BOOTH units must overlap each other in order to handoff from 1 to the other.
    Show much bs on the web that I have to filter the pages and there not enough time in the day to go thru it all.

  • Sap UM connector 9.1.2 trouble with "SAP User Management User Recon" task

    Hello All,
    i have a problem with Sap UM Connector version 9.1.2.
    OIM version 11.1.1.5
    Windows 2008 R2
    Problem is:
    Then accounts in Sap are created through direct provisioning feature of connector everything works ok (subsequent update or delete an account).
    But if a user account is created in Sap using Sap GUI, scheduled task "SAP User Management User Recon" of connector doesn't create reconciliation event to link user.
    Sometimes it does though, but for one user account created using Sap GUI in OIM created two reconciliation events, so corrsponding user in oim have two records for resource SAP.
    In this reconciliation events, one have full set of attributes (Login, First Name, Last Name, E Mail, etc), another one - just these 3 attributes: IT Resource, User ID, Lock.
    "SAP User Management Delete Recon" scheduled task works ok then user account has been deleted using Sap Gui.
    How one can troubleshoot such behavior?
    Can anyone advise please?

    resolved the issue by updating sap um connector to version 9.1.2.5

  • Users not showing in Terminal Server Under Remote desktop services manager and Task Manager

    Hi All,
    I have a problem here in Terminal Server. I can not see the users logged in to Server but i know users are accessing the files and currently working.
    1. From the Task Manager-- Show processes from all users displayed all the processes accessing by users.
    2. From the Task Manager-- From Users Tab--No users list at all
    3. From the Command Prompt- Query users-- No information
    4. From the Remote desktop services Manager-- used with IP/Host name-- Still can not see the users list and processes. So i can not kill the session if needed.
    Enviroment:
    TS CALS 20 currently accessing 15 users
    VM-WARE GUEST: 2008 RS Terminal Services/Remote Desktop services installed
    Windows up to date-- Just updated last month
    Problem is here for long time. Just couldn't find the time to trouble shoot.
    UMESH DEUJA MCP,MCTS,MCSA,CCNA

    Hi,
    Thank you for posting in Windows Server Forum.
    As you have tried many steps, I suggest you to try below command line and power shell command if successful in your case. Please try below command with Admin access:
    qwinsta /server:<servername>
    To kill a session use rwinsta to delete the session specifying the ID number:
    rwinsta /server:computer01 3
    Here's the list of command line tools for Remote Desktop Or, you can use PowerShell:
    Get-RDUserSession and Disconnect-RDUser
    Please check the list of Power Shell command from
    this link.
    Hope it helps!
    Thanks,
    Dharmesh

  • Safari can't establish secure connection in parental controls managed user account

    Hi,
    Safari can't establish any secure connection in parental controls managed user account. Normal web sites open OK, but secure connections, like Gmail which requires https doesn't work. This is what I get instead:
    Safari can’t open the page “https://www.google.com/accounts/ServiceLogin?service=mail&passive=true&rm=false& continue=http%3A%2F%2Fmail.google.com%2Fmail%2F%3Fui%3Dhtml%26zy%3Dl&bsv=llya694 le36z&scc=1&ltmpl=default&ltmplcache=2&from=login” because Safari can’t establish a secure connection to the server “www.google.com”.
    Any ideas how to overcome this?

    Do you have anti virus software installed, or Peer Guardian?
    "https note: For websites that use SSL encryption (the URL will usually begin with https), the Internet content filter is unable to examine the encrypted content of the page. For this reason, encrypted websites must be explicitly allowed using the Always Allow list. Encrypted websites that are not on the Always Allow list will be blocked by the automatic Internet content filter."
    From here:  
    Mac OS X v10.5, 10.6: About the Parental Controls Internet content filter

  • Mac app store will not connect under a managed user account but will under admin. Please help clear this up?

    After I have installed OSX Mountain lion I clicked on the app store to buy an app. Only one problem, it says it "cannot connect", I then tried under the admin account and it worked no problem. I log back into the managed user account and disable any parental controls that might be interferring, I try again and it worked. I need the mac app store to work under the managed user with parental controls on. I cleared the iTunes store cache and reset the warnings just to see if that might do the trick but no luck. When the latest update was availble I updated immediatly in hopes of that might fixing the problem but again it did not work.  I would really appreciate if anyone had any ideas on how to help solve this issue.
    -Thanks

    Back up all data before proceeding.
    Step 1
    Triple-click anywhere in the line below on this page to select it:
    /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist
    Right-click or control-click the line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and test.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
    Log out, log back in, and test. If there's no improvement, continue.
    Step 2
    Reset your computer’s PRAM.

  • Task manager show process from all user

    Hi All,
    Need a help.
    I need to enable "task manager show all show process" for all normal users(view like XP) irrespective of admin or not.
    Can any one help me how to go about this through GPO. I searched a lot in net but could not found any convincing solution for this.

    This is not possible. User processes are isolated from each other. Only administrators can retrieve information about processes from other users. Either make your users local admin, or tell them this is not possible.
    This is because of the security design which isolates users from other processes (service processes and other users' processes)
    there are many things that don't work anymore. For example, on XP it was possible to give service applications a user interface (for example for disgnostic or development purposes). From Vista onwards this is no longer possible because allowing users to
    interact with service applications is a security risk.
    There are many such changes, and you have to update your processes accordingly.

  • Open Tasks of Managed Users

    Hi,
    The Open Tasks function allows the Manager to query the tasks assingned to the managed users... But It only works when the managed user is directly assigned to the task. If the user is member of a group and a task is assinged to that group, so the manager can not see that task. He can see only the tasks where the user is the assignee.
    As I have many resources where the provisioning tasks are performed for different groups (with two or more people), so I have to configure the groups as the assignee.
    Thanks,

    Thanks your attention, Kevin. I haven't.
    There are scenarios where the manager will execute or reassign the task (not only query), so the better option is to have these tasks listed in the open tasks menu. It may happen the members of an assinged group are not working, for example, so the manager will perform the task.
    Thanks.

  • Group Policy to Allow Non-Administrative Users to View All User Processes in Task Manager

    Hi All:
    Trying to get users with just Remote Services right (can remote in, no administrative permissions what-so-ever, to have the ability to view all processes by all users on the server.
    I would like to do through group policy, however I cannot seem to find a policy doing just this. Any ideas?
    2008 R2 Forest btw.

    Hi,
    Thank you for posting in Windows Server Forum.
    The connection permissions that are set in Remote Desktop Session Host Configuration also determine the actions that a given user can perform in Remote Desktop Services Manager. For example, a user must have at least the Remote Control special access permission
    to remotely control a user session by using Remote Desktop Services Manager.
    Please check below article for details.
    Configure Permissions for Remote Desktop Services Connections
    http://technet.microsoft.com/en-us/library/cc753032.aspx
    In regards to viewing process on RDSH server, can view the process in process Tab in RDSH manager.
    Managing Users, Sessions, and Processes
    http://technet.microsoft.com/en-us/library/cc732808.aspx
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • I have the problem described in /forums/knowledge-base-articles/704725. (Firefox is already running but not responding). My only solution is to use Task Manager to end the firerfox process. I am the only user and there are no other profiles on my system

    Occasionally I have the problem discussed in /forums/knowledge-base-articles/704725 , Firefox is already running. My only fix is to use Task Manager to end the firefox process. At such tmes, I have no other instances running.

    '''https://support.mozilla.org/questions/997866?esab=a&s=&r=1&as=s'''.<BR>
    This is not a cure but will make it easier if Firefox locks up.

  • LogonUI.exe, can't see it in task manager anymore, dose it mean its not running?

    after i tried to solve the issue with 26 csrss.exe running, it seemed to meany, i no longer see LogonUI.exe in task manager.
    forum posts from csrss.exe topic.
    Post 1
    i tried process explorer & trying stuff with that i opened a new csrss.exe & that works under my user not system & i cant kill that process (i double clicked on it), after restart it goes away? or should i just pull the cable out? i mane sudden
    shut down, status suspended, but it is on the list in task manager, how to get rid off it, end progress tree?
    it just it did not have any info about csrss, so i tried to open it with process explorer, but that thing did not do what i though, that's why it all happened.
    it also opened new Client server runtime process, i guess that csrss.exe under user is still in task manager list.
    Post 2
    restart solved the issue, at least it seems so, also that incident removed 24 csrss.exe from task manager, i had 26 running new i have only 2, i did it just to find out that maybe i can remove the csrss.exe what i opened after restart, but i did not expect
    this result, maybe this what some call zombie processes, they were in use once & when the process stopped they were stuck?
    some processes disappeared, example LogonUI.exe is no longer running, i had 25 LogonUI.exe running before, with restart it booted, i hope that PC will start tomorrow to, i hope i did not mess up something & it wont start,
    or i messed up PC security, made security holes.
    Another forum
    Post 1
    u have no idea what happened, i got both Process Monitor & explorer, i messed up double clicked on csrss.exe & that opened a new csrss.exe in task manager under my user, then i tried to kill the process, but it only suspended it, then i was thinking
    maybe after restart it lets me remove it totally from task manager, i made restart & what do i see when i open task manager? i see only 2 csrss.exe running, LOL sometimes messing up fixes the problem.
    maybe this what some call zombie processes, they were in use once & when the process stopped they were stuck?
    but all csrss.exe seemed legitimate, & no infection.
    Post 2
    does LogonUI.exe really run right new? is it just not showing? if its not running then i would have error message or problems with display? it would be funny if tomorrow i have all the 26 csrss.exe back.
    is LogonUI.exe running & just hidden, was it normal that LogonUI.exe was shown in task manager before? or is it  normal when its hidden? will it effect gaming? cant test, no games installed right new.
    but csrss.exe is not the only process that has more then 2 running & some over 10, one i counted it is 25.
    ok this are gone to, maybe this were connected to csrss.exe issue, but i have 10 svchost.exe, this should be normal?
    some processes disappeared, example LogonUI.exe is no longer running (well it seems it is no longer running, cause its no longer shown in task manager), i had 25 LogonUI.exe running before, with restart it booted, i hope
    that PC will start tomorrow to, i hope i did not mess up something & it wont start, or i messed up PC security, made security holes.
    i know some of my post i copied here repeat some things i said before, i copied the post cause i was thinking that it will help people to understand my situation better :).
    & i only double clicked on csrss.exe in windows system32 & created a new process, & i did end task to it & it was only suspended not killed, there was 2 win explores opened, one was cause i double clicked csrss.exe trough explorer, well u
    can see the files with out it, i was unable to remove it so i made a restart, & some processes were gone after that.
    i wonder did i mess up my windows & stopped some necessary progresses? despite the fact that PC is running, & seem to be running fine.
    csrss.exe was running 25 times & csrss.exe was running 26 times, but there was more processes that were running more then 3 times & they are gone to.
    if some processes i don't see any more are necessary i hope they at least run on background silently, is LogonUI.exe meant to run all the time like it did before? or only for few sec on log-on/start-up? so user never see it.
    PC seems to run fine right new, i did that stuff yesterday.
    i also have alienautopsy  & PC-Doctor to what is part of alienautopsy, i mentioned it in case it matters, also when i got in windows i so some strange process for few sec in task manager, its icon looked like computer chip, cant remember the process
    name, but if i remember correctly it was DLL or Intel process.
    under what name is LogonUI.exe admin tools service? i could check it from there, if u think its necessary

    well LogonUI.exe is listed on my task manager again, i mean its back, & about csrss, i have 3 running, i had 2 running yesterday (in task manager all 3 are running under system), with process explorer, it did not matter which of the csrss info i looked,
    all is same, all are runede by same processes, i could not copy that info under environment, but what i remember is, one was a  Invidia Pshysx, second & 3th was something to do with Intel, then i remember powershel, all that i remember, not worried
    about csrss yet, cause its still just 3, but i wonder about LogonUI.exe, for some reason i can't add picture/screenshot here
    dunno is it all normal or not, but i write it down here just in case, no problems with high memory nor cpu usage, PC seems to run normally
    if its not normal i have no idea whats causing it, i guess i need to just w8 a year or so before i give my PC to shop for maintenance, cause this is beyond me i think, cause no infections found & PC seems to run & function normally, maybe its caused
    by some old registry entries, i know registry cleaners are dangerous & can harm windows, so i think windows team should create their own reg cleaner free ware that finds only unnecessary reg entries that are no longer needed, a safe reg cleaner, also it
    mite be software issue/bug like example Invidia maybe is creating to meany hosts or how are this things called, csrss is connected to host service as far as i know, same goes for powershell & others that use csrss.exe, or windows bug, or bug that is caused
    by both, win8.1 & this drivers, well that's just a guess
    maybe its a bug, system has problems with removing some closed processes from the list, or shutting town the ones that were suppose to run temporarily?
    maybe i should ignore it until it starts to cause problems? i mean hit performance in a negative way
    i also noticed 2 dwm.exe & winlogon.exe running
    i used Ccleaner, but not for registry, i cleaned internet temporary files system temporary files event logs & memory dumbs & so on & on (its to much writing to write down all it cleans), if some of this type of files what are deleted with
    that, can it cause some processes to multiply? maybe among this files is a file where its written example what processes should be running or which process is connected to which process, like the Path & stuff, so registry cleaning is not the only cleaning
    that can cause issues?  or is it
    coincidence that after cleaning next day i see 1 extra csrss.exe &
    dwm.exe & winlogon.exe? either way i don't know do i want to test it & use cleaner 5 days after today again, does windows delete this things i mentioned i cleaned with cclener automatically over time? either way, i think i won't try anything
    to solve the extras issue, but if the number of this processes grows & it starts to cause problems i may just take the PC to a expert
    PC seems to run & respond normally
    EDIT 21/10/2014:
    today there is 2 csrss.exe & the other processes are back to 1 as well & LogonUI.exe is gone again, well i did not look processes when i turned PC on, i did it after restart, maybe it accrues after boot when win opens, that some processes remain
    & some are double
    is it normal that when i'm not doing anything with PC it takes 19% memory after PC start until i shut down & after restart it takes 16% memory (when i use restart button in windows), does this mean start up requires more memory & processes that
    remain running after start-up?

  • Why does firefox freeze and then doesn't fully release from memory, but I have to End Process from Task Manager?

    Frequently, Firefox for Windows (Vista) freezes up. I click on a link or try to go to another web page and nothing happens. The icon in the tab is just spinning, with Connecting. but it never connects. Then when I close it - if it lets me. I click to open it again and a window pops up saying that Firefox is already running, to please close it before launching it again. I have to go to Task Manager and End task from the Processes tab. It is also a resource hog including the Plug-In Container.

    The pluging container opens up unnecessary copies as the cookies/history are cleared, this is a known issue, it might be what you are seeing, and it is hoped to be fixed in some future release of firerox.
    There are some hangs affecting some users, with symptoms being high cpu usage, occurring as bookmark changes or syncing is in progress, there is a work around for that.
    Firefox hanging as you close it see:
    *[[firefox hangs]]
    * [[firefox is already running but is not responding]]

  • Java.exe keeps its memory in Task Manager

    Dear All,
    I am running EAServer 6.3.1 which uses JAVA.EXE to run its setup.
    1) My machine is windows 2008 EE 32 bit.
    2) I have 4 GB Ram on this machine.
    3) Java.exe memory settings are set to 2048 GB
    When i run EAServer 6.3.1 my java.exe memory increases to 98% and my application get crashed.
    i set my Java.exe to 3 GB by puting LARGEADDRESSAWARE switch and increased its memory to 3 GB. Now after increasing the memory of Java.exe to 3 Gb the problem remains same and my application get crashed on same 98%.
    What i noticed is JAVA.EXE is taking my system Virtual Memory and not the physical memory in starti and keep using VM. When i connected users with my application. different Java instances develop in Task Manager and when i DISCONNECT them the JAVA.EXE memory do not decreases it remains constant to 98% (please also note that total users connected are 225).
    Can you please help me in this regards.
    Special Thanks
    Regards
    Adeel Imtiaz

    Java is running in your virtual memory probably because you have something loaded in your physical memory that is blocking it's allocation of resources. DB's are usually memory pigs and may be reserving the space you want to use for Java.
    You have Java set to take 2 TB of your RAM, which you do not have or is that a typo.
    If you are trying to say you have a memory leak, then you'll have to check your program and see what's going on and EAServer bug pages to see if you are encountering a known problem.
    In any case--what you have posted, does not make any sense and anyone wishing to help you will be guessing until you can narrow your question down to something other than what essentially is this:
    "What have I got in my pocket?"

Maybe you are looking for