RCA audio into iPhone 4S

Is there a way to record LINE LEVEL audio into my iPhone 4S. I need to record actor table reads, and the audio comes out of an audio mixer at line level. Thanks for any help. This should be doable................right.........Apple.

I tried using one of those cables from kvconnection. If i take the "control output" from my behringer mixer, the levels come into garage band ok on my ipad. The cable did seem to solve the problem where i would hear a repeated pop when i had both the line out and line in connected to the mixer at the same time.
But the issue i have now is that the audio seems to be losing some bass frequencies. The kick drum has no thump, etc. Am wondering if the attenuator on the cable is doing this or if something on the ipad or garage band is doing that.
Has anyone successfully recorded quality audio into your ipad using the audio input cable? (not using a digital interface)

Similar Messages

How Do I Record Audio Into iphone 5

I'm looking for a way to do line in recoding through the headphone jack on an iPhone 5. I've downloaded FiRe 2 for this purpose but there are no settings to switch from the internal mic to an external mic. Their support has offered no solutions. I've also considered buying White Recorder and Pro Audio to Go but if I keep buying apps to test, I will have spent enough money to buy a dedicated recorder. I have the appropriate TRRS mic adapter cable from Sescom. My goal is to use the iPhone a s a field recorder for video shoots instead of purchasing a Zoom or Tascam recorder. I would also like to record live music events in stereo as well but the video application is most pressing now.
Thanks.
dp

My iPhone seems to automatically switch to an external mic when one is plugged in. The issue I find is that using the headphone port only allows mono recording because there is only one contact for the mic there (excluding the ground) To get stereo recording, you need to use a digital input, which goes through the dock/lightning connector. I don't know of any that are out for the lightning connector yet, but there are several options for using the dock connector.

I need to import a live analog RCA signal into a Macbook Air 13" model A1466 to record on Final Cut. Is this possible? If so, how?

I need to import a live analog RCA signal into a Macbook Air 13" model A1466 to record on Final Cut. Is this possible? If so, what equipment/cables do you recommend pruchasing?

If you want audio and video from your RCA cable source, you would need a converter device. One that I have used is the EyeTV Hybrid from ElGato. You attach to the Mac via USB, and can attach to RCA composite, Coax, or S-Video. You would record into the EyeTV software and later export to Final Cut for editing. This would not go live into Final Cut Pro.

Media Live Diva - No audio from on board RCA audio outputs

I am using the Media Live Diva (MS-7411). I am unable to route the audio to the RCA audio outputs built into the system board. I do not see an option to select these outputs in the setup. Any help would be appreciated as the MSI support seems to know very little about this board.
thanks,
George

I have been able to get output from the RCA on my board, make sure you're plugging into the Line-Out ones. I found that I have to play with the settings in windows to get them to work (connecting to a surround sound amp). I cannot remember off the top of my head but theres options in windows for playback devices: HDMI Audio, D2 Audio, Speakers, Headphones. Try each of these in turn, you can right click each one and hit Test and it will play a chirpy little tune in each speaker L+R.
Not that this only outputs stereo and may be quiet on some systems as it is a line level output i.e. it needs to be amplified.
Hope that helps.

Can not sync all photos in Aperture into Iphone 5

I can not sync all photos in Aperture into Iphone 5. It always can sync some photos into 5. Then finish and prompts: "itunes can not synchronize (other)thousands of projects, and see more information in itunes". That means most of my photos can not seen on Iphone 5, it seems just can't import to 5. Is that the problem of Iphone or the pictures in Aperture, or even just because lack of sufficient space?

Solved here...
Photos app not syncing with iTunes

I am using Iphone with windows. I have draged photos from my computer into Iphone in the past, but cant seem to do it now. How do I move photos from my pc to my iphone without deleting photos that are on the phone.

I am using Iphone with windows. I have draged photos from my computer into Iphone in the past, but cant seem to do it now. How do I move photos from my pc to my iphone without deleting photos that are on the phone.

You cannot drag pics from computer to iphone. This has never been a feature of iphone.
You sync them as you would anything esle.
You select photos from the photos tab. Whatever is selected will be on your iphone. Anything not selected will not be. Make sure that everything you want on your iphone is selected, then sync.

I want to back up an Iphone 3G and put all the content into Iphone 4. When Iphone 4 is connected to Itunes I do not get an Option to restore from Iphone 3G. IOS 3G - 4.2.1

I want to back up an Iphone 3G and put all the content into Iphone 4. After I have backed up the Ipone 3G and then when Iphone 4 is connected to Itunes I do not get an Option to restore back up from Iphone 3G. The only devive is see in the drop down list is my Iphone 4. The IOS on Iphone 3G is 4.2.1 and on Iphone 4 is 4.1.
Please share if anyone has any solution to such a problem.

You will first have to update your iPhone 4 in order to restore it from the backup of your 3G. Follow the directions here:
http://support.apple.com/kb/HT4972
This is an erase/restore deal, so make sure all of your data is on your computer before you begin. iOS 6.1.2 will be installed on your iPhone 4.
Once done, on your iPhone 4: Settings>General>Reset>Erase All Content & Settings. You'll now be able to restore your 3G backup to your iPhone 4.

Embedding audio into indesign for playback in pdf

Hello, i'm trying to create a pdf book of educational lectures with audio of the transcribed lectures embedded into the pdf so the user can read and listen along as they like. my solution to this was break up the audio into sections and embed using buttons. this way, the user just has to mouseroll over a button in the margin to play the particular section they want to listen to. there are about three sections per page. the downside of this solution is that the audio doesn't keep playing of course, it just plays that section then stops. i'm now wondering if it might be possible to just have one audio file instead of 60, and make buttons (for each section) that open up the file at a particular point in the audio corresponding to the section; in other words (my question), is it possible to make a button that opens an audio file and plays it from a particular point, not just from the start? I would appreciate any suggestions.

no pardon necessary! i need to embed the audio file because it contains the original lecture, that's what I want the reader to have access to while reading the transcription, since the transcription is not meant to substitute for but rather supplement the audio. for example, in the transcribed text I have put "[...]" for segments of the recording that are inaudible. If I put the original audio into the file then the reader has the option of going to that specific section and listening to it themselves. basically i want to create a pdf document of a lecture. I want to be able to highlight important parts of the lecture, search the lecture for key-words, and scan it quickly for specific items of interest, but I also want easy access to the original audio because tone of voice isn't translatable into text (and the tone of voice in this case is important for meaning), and because there are many segments that I couldn't hear, so I'm trying to figure out the best way to link sections of the text to specific sections of the audio.

I'm trying to record audio into my iPad2 using GarageBand and an iRig, but I can't monitor my tracks at the same time as recording, meaning if I lay down a drum track and attempt to record guitar, I can't hear the drums while recording. Thoughts?

I'm trying to record audio into my iPad2 using GarageBand and an iRig, but I can't monitor my tracks at the same time as recording, meaning if I lay down a drum track and attempt to record guitar, I can't hear the drums while recording. Thoughts?

Hi, I have this exact same problem. I haven't been using an iRig, just a cheap USB-jack cable. I managed to do this with the first cable I bought, but since it broke I've been unable to find a replacement that allows me to hear the drums while recording. DId you manage to get over this issue? If so I would really like to know how. Thanks and best wishes.

Used to convert all my videos into iPhone mp4 format using Any Video Converter - then add it to my iPhone 3GS. But last few days, I cant add video files to iTunes. and the iTunes doesnt even specify the reason except for that "files are not supported"

Everyting was perfect earlier. Used to convert all my videos into iPhone mp4 format using Any Video Converter - then add it to my iPhone 3GS. But last few days, I cant add video files to iTunes. and the iTunes doesnt even specify the reason except for that "files are not supported"
Everything is fine.
-They are the right format
-Quicktime is updated
-I have tried simply dragging them into the 'movie' library
-I have tried going to file<add file to library
Nothing works, has anyone else had this problem and found a way around it?
Any and all help appreciated.

In addition to Mike's suggestions, you only have 4GB of RAM and Mavericks does use more RAM than other versions. You may also want to look at the apps that startup on login and the possiblity of upgrading RAM.

How to embed audio into file for export to pdf

Hello, I've transcribed a two-hour lecture and copied it into Indesign. I would like to create a pdf with the audio of the lecture embedded in it so that when the reader clicks on a paragraph or a button the audio for that particular sentence or section starts up. The point is to allow the reader ready-access to the audio that corresponds with the transcript. Ideally the reader could click anywhere in the text and the audio would start there. Does anyone have any suggestions for making this kind of document? much appreciated.

no pardon necessary! i need to embed the audio file because it contains the original lecture, that's what I want the reader to have access to while reading the transcription, since the transcription is not meant to substitute for but rather supplement the audio. for example, in the transcribed text I have put "[...]" for segments of the recording that are inaudible. If I put the original audio into the file then the reader has the option of going to that specific section and listening to it themselves. basically i want to create a pdf document of a lecture. I want to be able to highlight important parts of the lecture, search the lecture for key-words, and scan it quickly for specific items of interest, but I also want easy access to the original audio because tone of voice isn't translatable into text (and the tone of voice in this case is important for meaning), and because there are many segments that I couldn't hear, so I'm trying to figure out the best way to link sections of the text to specific sections of the audio.

Latency, Recording incoming Audio into Logic,... I don't understand

I'm trying to clear up my understanding (or misunderstanding) of latency of incoming audio into Logic.
As a test, here's what I did.
Set-Up
1. In Preferences/Audio/General, I set Plug-In delay Compensation to off.
2. In Preferences/Audio/Core I set the I/O Buffer Size to 32 (is this necessary?, to go that low?)
3. In Preferences/Audio/General I turn on the Low Latency Mode On, set Limit to 0ms (Zero Milliseconds)
4. Created a 1/4 note click track with Klopfgeist.
5. Just for reference, I converted to audio. Opened in the sample editor and it is indeed, exactly on the beat.
6. Set up my Roland Fantom as a Midi instrument. Channel 10 to trigger a Side Stick sound.
7. Create another 1/4 note click track.
8. Recorded the Rolands Output into my MOTU 2408 interface into Logic.
9 Opened up the waveform up in the sample editor, zoom in and notice it is obviously late.
10. Move the Anchor point 6 ticks to line it up,
Therefore, the incoming audio is off by 6 ticks.
Is it not possible to get 0 latency? I read the chapter in the manual but I believe this wasn't made clear, i could be wrong.
I have a guitarist coming over to record on my record in a week, I don't know how to deal with this except to move his entire track
by 6 ticks. ?

That is not really the type of latency that's affected by your audio I/O buffer setting. A DAW system has different types of latency, MIDI latency, latency caused by some plugins, AD/DA converter latency..etc. The six tics will probably remain the same or close to it if you're buffer is set to 64, 126, 256...etc.
Why do you have "Low Latency" mode selected, do you know what it's function is?
The I/O buffer setting affects two main aspects.
The response of the system when you play a virtual instrument, and...
...real-time monitoring of an audio input track. (this is an audio signal that passes through Logics audio engine and can use live effects)
The example using the Fantom requires MIDI sent to the keyboard and the audio into the MOTU passes through the AD converter.
What you want to set is the Record Delay so that your audio records in time, however... it needs to be set using a loopback test.
Use a 1/4 note recorded audio click (side stick) that you've adjusted to be perfectly on the beat copy it a few times. Use a cable from the MOTU's output to an open channel's input, record the click, compare.. now adjust the "Recording Delay" until the recorded click matches the first click.
Recording delay is on the Preferences/Audio tab.
pancenter-

Can't Drag Audio into Storyline

I'm a newer FCP X user. In the past, I was able drag audio clips from the side audio panel/library into my storyline. For some reason I can no longer move audio clips into my storyline, I think I change a FCP setting by accident. Whenever I select/click-on and audio clip from the audio panel/library, the background of my storyline viewer turns from a light gray to dark gray. In the past, this did not happen, I could just click and drag audio into the storyline and the background of the viewer did note change color. Now I can move audio into the storyline. Does anyone have any ideas as to what happened. Thanks

Trashing the preferences does not touch your projects or your application. Preference files are kept separately and they do someties get corrupted. Trashing them is one of the first steps to troubleshoot problematic behavior in FCP X and other applications.
To trash your preferences, you can use Preference Manager:
www.digitalrebellion.com/prefman/

Can I get audio through iPhone when using apple tv?

Can I get audio through iPhone when using apple tv?

What do you mean exactly? Are you wanting to output the audio to your iPhone while say watching a video on your Apple TV? If so, I'm afraid it's not possible. However, you should post this in the Apple TV forums for a better confirmation on then. There are some prettty knowledgable people who hang out there.
https://discussions.apple.com/community/appletv
B-rock

Importing custom fonts into iPhone apps - HELP?!

Hey guys, new to these forums. Just wondering if somebody could answer a few questions regarding successfully importing and using custom fonts into iPhone applications. As shown here,
http://forums.macrumors.com/showthread.php?t=569311
http://discussions.apple.com/thread.jspa?threadID=1447085
http://stackoverflow.com/questions/360751/can-i-embed-a-custom-font-in-an-iphone -application
some have shown success in doing just that. To those who have done it, what i wanted to simply ask is:
What type of subclass did you put the code in? Mines is a UIView subclass but doesnt work.
What kind of interface and with what controls are you using? I am simply making a UIView with the code in order to test to see if it works and test other properties and customizable functions of the custom fonts. It doesnt work.
What specific property declarations must be in the .h file? I have none and it doesnt work.
Note that when I say it doesnt work, it actually compiles without errors, but when I build and go I just get a blank grey screen.
What say you?

To use Stanza you need Stanza's desktop client in order to get your books onto the iPhone. If you have an account with eReader.com, you can upload personal content to your bookshelf and transfer them to eReader on your iPhone in the same way you do books purchased from eReader's website. Keep in mind that neither will work with MobiPocket books that are DRM protected. Stanza will work with non-DRM formatted books (including Mobi's format), but nothing which has DRM protection. I have both and use Stanza for anything without DRM protection, and eReader for books Palm formatted books with DRM protection.

RCA audio into iPhone 4S

Similar Messages

Maybe you are looking for