RCA error in change analysis "No config stores found "

Hi,
I have configured E2E RCA in solman.
In solman_workcenter t.code. RCA -> E2E ->select system->if i click change analysis it is showing errror "No config stores found for 'GRD 0020251123 ABAP or no changes found' '' .
but if i click trace, exeception and workload i get graph.
i checked [Work Ceters error in change analysis: "No config stores found"] , but still i get the error.
Plz help to solve the issue.
Regards,
Karthik

hi
why dont you check all the lists given by JAI in the thread
[Work Ceters error in change analysis: "No config stores found"|Work Ceters error in change analysis: "No config stores found"]
jansi

Similar Messages

Work Ceters error in change analysis: "No config stores found"

Hello,
I have configured E2E diagnostics succesfully, but when i try to view change analysis (Root cause analysis) for my ECC development system, an error appears:
"No config stores found for 'EC1 0020256704 ABAP or no changes found"
Any of you have any idea about this problem?
Thanks and regards
Carlos

Hi Guys
In order to solve this issue , please refer to this SAP Note below
1392544 : E2E Change Analysis - Wrong "No store or no changes
If this above doesnt solve the issue then please follow these steps belo
w.
1.) Make sure the JAVA and ABAP stack are relevent as per this note belo
w
1274287 : End-to-End Diagnostics SP18(EHP1)- SP19 - SP20 -
2.) Please make sure that you have applied the central note
1334252 SAP Solution Manager - Basic functions (SP20/21)
and check if you are able to activate the following objects in
SE80 via the context menu.
Classes: CL_WD_COMPONENT_ASSISTANCE
3.) Make sure the user SOLMAN_ADMIN has profile S_SMDIAG_E2E
3.) Afterwards, for system ID in subject . make sure the main Instance is been sele
cted as per this document
https://websmp204.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000703907
&_SCENARIO=01100035870000000112&_OBJECT=011000358700000074392009E
4.)
Run the Managed Setup wizard from SOLMAN_SETUP -> Managed System
Configuration, step 4. Configure Diagnostics.i.e the Main Instances that should be selected in
the wizard step.Ensure the wizard runs with no errors.
I am sure this will fix the issue
Best Regards
Jai Wardhan

Reg : No config stores found and extractors missing in EFWK administration

Hi,
We have configured RCA for ERP Production system.No tabs are apperaing when we click on change analysis such as Overview tab,EC6 ABAP Stack tab.System also throws an error message "No config stores found".
Also when I check RCA -> common tasks -> Extractor FWMK Administration -> Managed system,the following extractors are not shown such as E2E_CCDB_TO_CUBE,SDF/DUMP_EXTRACTOR,/SDF/SYSLOG_EXTRACTOR,E2E_ME_RFC_ASYNC
Kindly help.
Regards
Shailaja

Dear Shailaja,
You must make sure that your Managed System Configuration is done in transaction solman_setup for this managed system.
Once everything is executed and in green status, including the Managed System Setup Wizard, the extractors will be working properly for your system.
Best regards,
Guilherme Balbinot

Why do I get Math Exception Error - the underlying analysis dll was not found

I can find this question in the list, but the answer is about .NET.
I am only using MFC on MS2010. Anybody know which dll I should include?
Thanks

Hello Rick -
My guess is that you've only installed the MFC 2010 support, but not run through the actual MStudio installer. The following instructions come from the "Installing C++ MFC Legacy Support if Measurement Studio 2009 Visual C++ MFC Support for Visual Studio 2008 or Measurement Studio 2009 Visual C++ MFC Support for Visual Studio 2005 Is Not Installed" section of the MFC 2010 support readme. Please make sure you've followed these instructions, I think it should resolve the errors you're seeing.
Complete the following steps to install C++ MFC Legacy Support on a machine that does not already have Measurement Studio 2009 Visual C++ MFC Support for Visual Studio 2008 or Measurement Studio 2009 Visual C++ MFC Support for Visual Studio 2005 installed:
Log on as Administrator or as a user with administrator privileges.
Install Measurement Studio 2010 or later .NET support for Visual Studio 2010. You can perform a minimal installation—de-select Help, Examples, Visual Studio Integration, Additional Features, and Device Drivers from the installer feature tree. This installs the underlying dependencies required by the Analysis and DataSocket Visual C++ MFC class libraries.
Double-click the MStudioVS2010CppLegacyR2 self-extracting .exe file.
Enter the password provided in the email you received from National Instruments validating your use of this product and click OK. The file automatically extracts to Program Files\National Instruments\MeasurementStudioVS2010\VCNET on a 32-bit operating system or Program Files (x86)\National Instruments\MeasurementStudioVS2010\VCNET on a 64-bit operating system.
Navigate to the NIACTIVEX folder within the extracted VCNET directory and double-click setup.exe to run the NI Measurement Studio ActiveX Control Installer. Follow the instructions that appear on the screen. You can use the same serial number for this installer that you used to activate Measurement Studio 2010 or later. This installs underlying dependencies required by the User Interface and 3D Graph class libraries. The R2 version includes an updated NI Measurement Studio ActiveX Control Installer; National Instruments recommends using the latest version of this installer.
NickB
National Instruments

Error -5093 "The analysis library was not found" in 64 bit project. But the analysis library is found in 32 bit project

Hello,
I'm using the Labwindows/CVI 2010 Full Development system, in a Windows 7 professional 64 bits computer. So, The analysis library is installed (see in the attached file), and the Option Analysis from the Customize library menu is selected.
I'm using several function from analysis library (WhiteNoise, MaxMin1D, LinFit, etc). The projects in 32 bits work very well. In 64 bits project there is not linkage error, the exe is created, but there are errors like that:
Function WhiteNoise: (return value == -5093 [0xffffffffffffec1b]). The analysis library DLL was not found or could not be loaded.
the same for the other analysis library functions.
how to do to use the analysis library in 64 bit projects, it's the analysis library 64 bit compatible?
thanks in advance
Solved!
Go to Solution.
Attachments:
AnalysisLibraryInstalled.jpg ‏220 KB

Hi DansatB,
thanks you for posting on this forum !!
Yes, the advanced analysis librairy is 64 bits compatible. i can do the test on my computer on CVI 2013.
i think it will be great to correctly uninstall your CVI version ans all install again.
Regards
Aurélien Corbin
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
Cahiers de vacances de NI
Présentations en ligne : 12 fondamentaux à réviser, du 9 juillet au 29 aoû...

After moving from Canada to the US, getting a new iPhone 5C, and restoring my backup from iCloud, I can't update my apps. I get an error message that my account is not valid in the Canadian App store and I must change to the US store. How do I do that?

After moving from Canada to the US, getting a new iPhone 5C, and restoring my backup from iCloud, I can't update my apps. I get an error message that my account is not valid in the Canadian App store and I must change to the US store. How do I do that?

Change here:
Settings > iTunes & App Stores > Apple ID: > View Apple ID > Country/Region.
You must have a verified billing address & be located in the country whose store you are trying to use.

Error in extractor for Change Analysis

Hi experts,
I have already set up Root Cause Analysis in SAP Solution Manager and I am facing an error with a Chage Analyssis extractor.
Solution Manager 7.0 Ehp 1 SPS24
Managed System where error is: DES - ECC 6.0 (Implemented part of EhP1)
SAP_ABA     701     0006
SAP_BASIS     701     0006
PI_BASIS     701     0006
ST-PI     2008_1_700     0002
SAP_BS_FND     701     0006
SAP_BW     701     0006
SAP_AP     700     0020
WEBCUIF     700     0006
ST-A/PI     01M_ECC600     0000
When I run "Extractor FWK Administration" from Root Cause Analysis workcenter and I go to managed system DES:
In Extractors
CHANGE ANALYSIS      SAP BASIS 7.01 E2E_CCDB_TO_CUBE ......
If I mark this row and I select log I could see the following error:
E2E_CCDB_TO_CUBE - COMPV NOT FOUND IN LANDSCAPE-API FOR LONG_SID INSTALL_NUMBER
And If I go to Log Details
Postdataloader E 8 E2E_CCDB_TO_CUBE - COMPV NOT FOUND IN LANDSCAPE-API FOR LONG_SID INSTALL_NUMBER
Extractor E 8 COMPV NOT FOUND IN LANDSCAPE-API FOR LONG_SID INSTALL_NUMBER
I have been surfing on internet but no clue what to do.
Please help.
Thanks in advance.

Go to http://service.sap.com/diagnostics => Media Library... => SAP Solution Manager Landscape Setup Guide =>
Check page 17, chapter 4.4 SAP ERP 6.0 / EhPx for SAP ERP 6.0
Follow the instructions and reply the results.

Error while accessing E2E Change Analysis via SMD

Hi All,
I am having below mentioned error while accessing E2E Change Analysis via SMD.
Error loading template 0TPL_0SMD_CA01_Q0001
Notification Number BRAIN 276
Let me know if you are aware about the solution.
Regards,
Vinit Pagaria

Is the Queries and templates activated completely in BI-content/Client?
Please check the same and if needed activate the queries again by running report :CCMSBI_SETUP_E2E
Also refer to the SAP Note 1342231 - ST: Manual actvtn. of BI Content for E2E diagnostics SP18-22.
Revert for any issues pls.
Thanks,
Jagan

MBAM 2.0 SP1 Self help website error after changing name of website on IIS and web config

guys
i need your help here , i have fully operational 3 tier enviroment with config manager ,when i created this enviroment i only used the fully qualified domain name of the web server and now i need to change the name in order to comply with company website
names.
now i have went to ISS and changed the name on the bindings and changed also the web config file and this resolved the helpdesk website as it can now talk to backend and retrieve the key .
my only issue now is the self service website , i changed the web config for it as we and when i try to retrieve the key it says an unknown error has occured please contact IT , am not sure where else to check , please help

If I would be in your place, i would rather have created an alias for the existing FQDN with that of the newer one into the on-premises DNS Server.
Create a Fully Qualified Domain Name (FQDN) in DNS that users and group policy settings will use to connect to the MBAM server. For example:
http://bitlocker.contoso.com.
Open DNS manager.
Expand DCServer_Name>>Forward lookup Zone>>Domain_Name.
Right Click on domain name and choose New Alias (CName).
Provide the alias name(bitlocker.contoso.com) and the FQDN for the target host.
Is the web site for User Support service is accessible?
Gaurav Ranjan

Hi I have bought iPhone 5s LL/A and my iPhone now has error 40 I think it means hard error how can I change it at apple store?

Hi, I have bought iPhone 5s LL/A and my iPhone now has error 40 I think it means hard error how can I change it at apple store?

Contact Apple Support or your carrier about getting it serviced:
Apple - Support - iPhone - Contact Support
Apple - Support - Service Answer Center

How to change default Ovi Player store ...

Hi,
I need help from you people.
I had installed Ovi Player. Whenever I try to open Ovi Player, the default store gets’ open is "India". I change the store location to "Germany". When I do the search for particular music, it will again take me to "India" store instead of "Germany" store. In addition, most annoying is that I have to re-login but my user id and password will not work as its different store. Also when I go via music.nokia.de and try to login, it open Ovi player and since default location is "India", it takes me to India store and my login credentials do not work.
I ask Nokia care on how to change default Ovi Player Store location but they are unable to provide any good answer.
I already un-install / re-installed but won't work. Do any of you have answer to my problem? I want my default Ovi Player location to be "Germany" instead of "India".
More information, my regional settings have location as “Germany” and language as “English”.
Please help.
Thanks for your response.
Regards,
Subhendra
Nokia N97 Black
RM-505
V12.0.026
0586701
Solved!
Go to Solution.

I had got message from Nokia on how to correct this issue. This had solved the problem. Below is the mail from them ...
Dear Chakraborty,
Thank you for your response.
This error is sometimes caused by a corrupted MDataStore.db3 file used by the Ovi Player. This file will need to be deleted with the Ovi Player closed. Then open the player and the datastore file will be rewritten by the application:
Close Ovi Music Player and delete the MDataStore.db3 file:
Vista C:\Users\<user>\AppData\Local\Nokia\Nokia Data Store\DataBase\MDataStore.db3
XP C:\Documents and Settings\<user>\Local Settings\Application Data\Nokia\Nokia Data Store\DataBase\MDataStore.db3
Both of these locations are in hidden folders. So, to view them users will need to:
Open Windows Explorer > Tools > Folder Options > View > Show Hidden Files and Folders
Once Ovi Music is opened again the MDataStore.db3 file will be rewritten to this folder.
  After that manipulation try to install the Ovi Player once again:
http://europe.nokia.com/explore-services/music/nokia-music
  Best regards
Nokia Care Team

Getting an error in E2E analysis

Hi,
In E2E analysis we are getting an error: The system you selected do not contain any software component currently supported by E2E Analysis.
Thanks
Shail

Hi Rajeev
this is java sever and getting an error in worklad analysis.
componets are :
ADSSAP     7.01     5     ADOBE DOCUMENT SERVICES 7.01
BASETABLES     7.01     5     J2EE ENGINE BASE TABLES 7.01
BI_MMR     7.01     5     BI META MODEL REPOSITORY 7.01
BI_UDI     7.01     5     BI UDI 7.01
CAF     7.01     5     SAP CAF 7.01
CAF-UM     7.01     5     SAP CAF-UM 7.01
CORE-TOOLS     7.01     5     J2EE ENGINE CORE TOOLS 7.01
DI_CBS     7.01     5     DI COMPONENT BUILD SERVER 7.01
DI_CMS     7.01     5     DI CHANGE MGMT. SERVER 7.01
DI_DTR     7.01     5     DI DESIGN TIME REPOSITORY 7.01
JLOGVIEW     7.01     5     JAVA LOG VIEWER 7.01
JSPM     7.01     5     JAVA SP MANAGER 7.01
KM-KW_JIKS     7.01     5     SAP_IKS_7.01
JLOGVIEW     7.01     5     JAVA LOG VIEWER 7.01
JSPM     7.01     5     JAVA SP MANAGER 7.01
KM-KW_JIKS     7.01     5     SAP_IKS_7.01
LM-TOOLS     7.01     5     LIFECYCLE MGMT TOOLS 7.01
SAP-JEE     7.01     5     SAP J2EE ENGINE 7.01
SAP-JEECOR     7.01     5     SAP J2EE ENGINE CORE 7.01
SAP_JTECHF     7.01     5     SAP TECH S OFFLINE 7.01
SAP_JTECHS     7.01     5     SAP JAVA TECH SERVICES 7.01
SWLIFECYCL     7.01     5     SOFTWARE LIFECYCLE 7.01
UMEADMIN     7.01     5     UME ADMINISTRATION 7.01
Pleasse advise us.
Thanks
Shail

Message failing in SXMB_moni----Error while reading from the secure store

Hi,
The scenario is as below
A file is picked up from a folder and processed to enrich it.This enriched file is then written back in a different folder.
The message is failing in sxmb_moni while trying to write the file in the folder.
The PI system is a system copy of another system and few of the configuration objects are transported through a tpz file to this PI system.The file receiver channel used to write this file is also transported through this tpz file.
Below is the error seen in moni.:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?> <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1"><SAP:Category>XIServer</SAP:Category><SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code><SAP:P1/><SAP:P2/><SAP:P3/><SAP:P4/><SAP:AdditionalText>Error while reading from the secure store: ERROR_U: No service user password found for Adapter Engine</SAP:AdditionalText><SAP:Stack>Error while reading access data (URL, user, password) for the Adapter Engine
</SAP:Stack><SAP:Retry>M</SAP:Retry></SAP:Error>
Below is Trace log:
<Trace level="1" type="B" name="PLSRV_CALL_ADAPTER"></Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV"></Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL"></Trace>
<Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
<Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP"></Trace>
<Trace level="1" type="T">error reading secstore:Error while reading from the secure store: ERROR_UNKNOWN: System-dependent data for entry changed: / (SECSTORE,031) </Trace>
<Trace level="1" type="System_Error">Error while reading access data (URL, user, password) for the Adapter Engine </Trace>
</Trace>
</Trace>
<Trace level="1" type="System_Error">Error exception return from pipeline processing! </Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST"></Trace>
Is this because PI system is a system copy of another system ?
Regards,
Sneha

Error while reading access data (URL, user, password) for the Adapter Engine
Check out Michal's reply:
Re: URL for Central Adapter Engine
As you said there was a system copy it may be the case that some things were not configured properly

Error - Could not complete the music store request, the store may be busy .

I get the error "Could not complete the music store request, the store may be busy, check your internet connection or try again later." I have uninstalled and reinstalled,Tried on and off with the firewall, tossed the prefs, tried older and latest versions. It used to work but it hasn't worked in the last few days.
Windows XP Pro

I found the problem to the iTunes Music Store connectivity. When iTunes version 6 is installed, it places a configuration / preferences file in the following location:
"C:\Documents and Settings\<user>\Application Data\Apple Computer\iTunes\iTunes.pref"
This file contains several very large keys:
Preferences:129= (41,826 characters in length)
Music Store= (1,722 Characters in length)
Somewhere in these keys is stored are references to userid's, connections or other TCP/IP / internet connectivity objects that are being used when iTunes is installed. By deleting this file, these old setting appear to be cleared out.
In my case, one or more of the keys in this file appear to have been storing a property from my old dial-up ISP connection that was no longer valid for my new, Comcast cable modem connection.
Once I deleted this file, and re-started iTunes, it was as if I had never run the software before. I bypassed the option for searching for and importing .mp4's from My Music, and Itunes opened correctly, with full access to the music store. My library and playlists were intact and all is well.
Apple should re-write the protion of iTunes codes that stores anything pertaning to an internet connection that may change over time. Alternatively, iTunes should either A) Prompt for this information B) Enable user access to this parameter in a settings dialog C) Access this information dynamically at runtime.
Paul

Can't create iTunes account or change country of iTunes store

Hello,
I hope this is the correct place to post this question.
I am set up my iTunes account, and the problem I'm running into has to do with the 'country' setting.
Going through the account setup process, at the credit card information screen, I click the link in order to change countries. I select 'Canada', and click 'Change Country'. At this point I am sent back to the iTunes store main page, which is set to the United States.
If I scroll to the bottom of the main store page, and select 'Canada' to change the country setting manually, I get the error, "Could not complete the iTunes store request. The store may be busy. Check your internet connection or try again later."
I have checked my Norton Internet Security firewall settings. I have cleared the DNS cache. The iTunes store functions normally in other ways, i.e. I can play song previews.
If anyone can help me fix this problem it would be greatly appreciated!
Windows XP

Here are two things to try:
http://docs.info.apple.com/article.html?artnum=304084
Another fix for network related issues that is working for some was suggested by another discussions user here:
http://discussions.apple.com/thread.jspa?messageID=3111505

RCA error in change analysis "No config stores found "

Similar Messages

Maybe you are looking for