RCA Managed SID users password locked

Hi All,
The configuration of the managed system went well for SID DR2. I have given Dialog user for the configuration of managed system and it created SMDAGENT_SMP and SAPSUPPORT users. But now when my Dialog user password is changed (due to its expiry), the RCA of some part is locking the Dialog user of managed system DR2 as its using same old password.
My question is whether this behaviour is happend to anyone else, and if it happend how to solve it.
Thanks,
Rohan

Hi Rohan,
If you are refering to SAPSUPPORT user being locked, check if you have changed the password for this user in the Setup Wizard for the system DR2.
1. Diagnostics Setup
2. Managed Systems
3. Setup Wizard
4. Setup Parameters
Under "Initial User/Passwords" inform the new password and rerun the setup.
If you are refering to the Diagnostics agent user being locked, refer to "RCA User Administration Guide" section 2.3.8. There you will see how to update the password for this user.
["RCA User Administration Guide"|https://websmp204.sap-ag.de/~form/sapnet?_SHORTKEY=01200252310000086995&_SCENARIO=01100035870000000202&_OBJECT=011000358700000178012009E]
Kind Regards,
Allam Drebes

Similar Messages

Workgroup Manager: Adv, User Password Type grayed out (was Shadow Password)

I've set Workgroup Manager, Advanced, User Password Type: Shadow Password, Options to inactive after 90 days, fail after 5 attempts, allow user to change password, at least 8 characters every 90 days. Today after user logged in to the console, the user locked herself out remotely via sftp, ssh, & xterm from a WinXP PC running ReflectionX.
I went to the console, used Fast User Switching to bring up my admin account (her account was still logged in), we reset the password with Workgroup Manager so the red X is no longer on her username.
However, the Advanced User Password Type: drop down list is blank and grayed out and she can't log in? How do I reset this? The user has a lot of files, I'm afraid to delete and recreate the user account. That seems pretty drastic for an invalid password attempt. I've rebooted and ran Apple Updates for good measure. Any ideas how to put Shadow Password back in that box?

To unlock the user's account, after backing everything up and noting the user's uid, home dir, groups, etc, we deleted the user in WorkGroup Manager and readded her putting the user id, home dir, etc back the way it was. Everything seems to work again. The home directory files were not deleted when the user account was deleted so everything just reattached.
Still have no idea how we managed to get things so confused in the first place? The Server UI is so much more complicated and inconsistent from the client OS for dealing with users. The Mac OS X Server for Dummies book I found did not have a troubleshooting section and was no help in resolving this. We ended up contacting the Mac User's Group.
I was blown away to get an email survey from Apple support asking me to rate my opinion of my help request. I didn't get any help! They told me my 3 years of AppleCare don't apply to the Server OS I installed separately after buying the mac. Mac OS X Server has 90 days of support that I never used but had expired. They offered to sell me a help ticket for $99.
This has not lived up to the user experience I was hoping to have. I regret the day we "upgraded" to the server. Is there a way to downgrade? Now that there is only 1 unlimited version, we're totally stuck. We have no mac client connected, just PCs via sftp, ssh, vnc, & X windows...

UME Actions - Manage All User Passwords

Hello everyone,
I am trying to create a role for our service desk to be able to manager users and be able to unlock them and/or reset their passwords. So I created a role with the identity management iview and gave the role the assigned action "Manage_All_User_Passwords". On <a href="http://help.sap.com/saphelp_nw04s/helpdata/en/5f/670db7939b8e48999d65f8a05ad611/frameset.htm">sap help</a> it says of this action:
"Provides permissions required by a user to change the password of other users independent of company. This also enables the user to view all user profiles."
Now the problem comes in with users in different companies. Any user I assign this role to is only able to search for users in their own company. Is there some other configuration I need to do or permissions I need to change to be able to manage the passwords of users in different companies?
We are running NW04s SPS10
Thanks for any help,
Chris Bahr

Yonko,
The role's assigned to my test user are all user created. There are no other assigned actions that would interfere. I have not assigned the delegated user admin role as this would give more power to the user than we want. What we are going for is a role for our support people to be able to unlock and reset people's passwords. So we just want them to be able to be able to unlock and reset the passwords of all users in all companies, which I assumed manage all user passwords would do, but I am obviously missing something.
Best Regards,
Chris

Connecting with Unix user/password using JDBC

1) Is it possible to connect on a java program, with JDBC, using the Unix autentification ?
With the JDBC thin client I use :
DriverManager.getConnection("jdbc:oracle:thin:@<ip addresse>:<listener entry port>:<SID>","<user>","<password>");
2) What Java syntaxe may I use, not to give the <user>/<password> in my java program ?
I want to lauch my java program from a shell script (UNIX). The Unix's user is know in my Oracle database.
3) Is it a secure way ?
Thank's

For what it's worth, I have not yet found a way to do this, either. But since it's not critical for me, I have given up on it, for now. I have not found anything on OTN nor in the Oracle documentation that explains how to do this. Sorry :-(
Good Luck,
Avi.

Hi, I forgot my user password mac 10.9.4 I don't need it to log in but i need it to make changes, etc. It says a password hasn't been set for this account but it still asks for one when i click on the lock icon. can anyone help me? thx!

Hi, I forgot my user password mac 10.9.4 I don't need it to log in but i need it to make changes, etc. It says a password hasn't been set for this account but it still asks for one when i click on the lock icon. can anyone help me? thx!

This is a little confusing since you say you have forgotten your password and then the system says you have not entered a password. Even with an Admin account you must have a password to install software.
If you are using Mac OS X 10.7 or above, you can change the admin password by restarting holding the Command and R keys, from the menu bar select Utilities, then Terminal. When the Terminal window opens, at the cursor type exactly:
resetpassword
and press Enter. When the Reset Password window opens, select the internal hard drive, and then the user account. Type a new password twice, leave the Hint blank, and then Save. Accept the next dialog that opens, and at the bottom of the Reset Password window agree to resetting the home directory permissions.
Quit the Reset Password window, go to the apple left side of the menu bar, Restart.
And you have a new password for your account.

SAP NW Solution Manager 4.0 Administrator/J2EE_ADMIN password locked out

Guys,
I was successfully able to install SPA Solution Manager v4.0(ECC 6.0) JAVA+ABAP Stack.
Post Installation, I am tried to logon to the SolMan (User Management & SAP Netweaver Adminsitrator) through HTTP (IE) URL http://<localhost>:port
The homepage displays just fine. When try to authenticate to User Management & SAP Netweaver Adminsitrator using following commbinatioln, the authentication fails.
user = J2EE_ADMIN password = <ADMIN>
OR
user = user = J2EE_ADMIN password = <admin> (Not sure if the password is case sensitive)
Now, I looked at the alerts and found that J2EE_ADMIN user is locked.
Does anyone of you know how to unlock this id and what its password should be ?
Any alternative user id/password can be used to login ?
Should I have to install SAP GUI for Java or ABAP ?
Please help me login to solution manager.
Thanks for your help!!
Chris.

Hello,
as far as I know you can login with a sapgui to your installed system. If you did an standard installation, then the J2EE stack is bound the client 001. Therefore logon as DDIC or SAP* to the ABAP part with SAPGui and unlook the J2EE_ADMIN user.
You had tp specify the passwort of all users during the installation process of SOLMAN 4.0. If you did an standard installation, you only specified one password for all kind of users.
HTH
Frank

Managed system user locking because of solman_setup wrong information

Hello,
Each time I go to solman_setup -> Managed system,
there are two systems with a red point because of non
working rfc connection.
When I reconfigure them (3. connect managed system), I change the
user/password to connect to the managed system.
But our solman still connects to the managed system with the wrong
username and password.
Then the user is locked in the managed system (too many connections with a wrong password),
How could I proceed to tell solman to stop using the old username
password provided?
Regards,

Hello Beniot,
I has similar issue some time back, please have a look at below link.
RFC error in third step while performing managed system configuration
reset the password and retry, and try to check dump in both the system, solman and system which you are trying to do manage system config.
Even after this you are getting error, please paste the screen shot or attach the error.
Regards,
Haseena

Registration of user password change in Oracle Identity Manager 9.1.0.2

Where I can find record in Oracle Identity Manager 9.1.0.2, if a user password change.
There any log, report, etc ...?
thank you very much

Check this: Re: Audit when change password fails
-Bikash

Restrict SU01 to only lock and unlock user passwords

how to restrict SU01 to only lock and unlock user passwords,(should not have acces to create users) What is the auth.obj I need to change ? please suggest.
Thanks
sr
Message was edited by:
sunny raj

Restrict authorization object S_USER_GRP to activity '05'
Cheers,
Ben

Use port 50013 (Management Console) with User/password

Hello,
I have a problem. We had a security auditory of SAP systems. They have seen that the port 50013 (Management Console) has not any security with user /password.
Is there a way to put a security before the information?
Best Regards.
Pablo Mortera.

Hi Pablo
The SAP Managment Console is a UI (Applet) to access the functionality of the sapstartsrv process, This process is used for montioring and administration of SAP instances and listens on port 5nn13 (or 5nn14 for https)
It is expected that you can access the UI without authentication but to carry out administrative functions (which are sapstartsrv webservice method calls) , such as shutting down an instance for example, authentication is required.
By default only the most critical of these web service methods require authentication but the list of protected webmethods can be modified. Please see note 927637 for more details

Boot Error: Intel (r) AT Supported system lock due to: platform attack detected: user password

I have HP ENVY Model 4-1110ET.showing Intel (r) AT Supported system lock due to: platform attack detected. Time left...... Please select one of the following for platform recoery: 1 - User Password 2 - Server Token Password. I forgot my password please help me I am unable to boot my Laptop.

Hi there
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel. I understand that your system is locked due to the anti-theft protection. Please see the following to get the help you need. Telephone Support for the Intel® Anti-Theft Service Provided by McAfee

Satellite A100 is locked due to the fingerprint BIOS & user password

Hi all
I've got my A100 at my job, with TouchChip fingerprint recognition a year ago. On the initial installation I have recorded my fingerprint from the windows interface.
Six months ago, I had to reinstall windows XP because of a non repairable virus infection. I've installed WXP and downloaded all the drivers and additional software from Toshibas site.
I have NOT recorded again my fingerprint, and I have NOT enabled the TouchChip software this time. My entire problem was only an annoying message at logon time that said "You haven't recorded your fingerprint yet . . ." and that was all.
After a 2 week trip out of town ( My A100 was locked in my desk, powered OFF-no connection to mains) at the first boot, TouchChip software came back from the grave ! ! !
"TouchChip Bios Extension" screen appeared after power on, and my finger is required to load in WXP ! ! !
At WXP user logon dialogue the additional message "You haven't recorded your fingerprint yet . . . is still here, but I can NOT boot the machine at all, without my fingerprint. After some digging in PowerProtector suite (?) I found an option that said "Enable or Disable the use of fingerprint for BIOS System and User passwords" or something like that.
I disable this, and the machine asks for reboot. This was the last time I saw the desktop.
After the boot the system asks for password. BUT I HAVE NOT SET ANY SYSTEM OR USER PASSWORD!
Is this possible?
I've done something wrong?
What's the solution?
I'm locked out; I don't know why and how the BIOS is locked with a password (so I can't unlock it).
Please somebody help.
Regards, Georgios

I don't know what exactly A100 notebook you have but it looks like the notebook was delivered with the preinstalled Vista OS.
You have installed XP and the single XP drivers from the Toshiba page.
But from my understanding the BIOS must be updated too! The Satellite A100 series supports an special XP BIOS version. If the BIOS was not updated then the notebook could run not correctly.
I don't know if this could have a bad influence on the fingerprint but nothing is impossible!
However, fact is that BIOS asks for the password. If you don't know this you will have to delete it on other way...and this can be done only by an authorized service provider in your country.
Ask the technicians for the help and explain the whole story! Maybe they will remove the password for free!
Bye and good luck

Nw 7.3 user admin lock : Authentication failed. Password locked

Hi expert.
please help me
i have a portal nw 7.3, but idont acceces , the administrator user is lock.
how i can this user?

Please avoid double postings.
The original question (where answers should be put, too) is here: Nw 7.3 user admin lock : Authentication failed. Password locked

Specifing User Password host sid

I am implementing BC4J applications and client views.
They are not deployed they are local.
I want to specify
host
user
password
sid
I can partially do this in the application in the get application module configuration parameter. However I have to know ahead of time all the configurations the application may use.
In the Client code it uses the Binding to get to the application server which is even more mystifying.
Is there away to parameterize the above information for both the application and client case?
I can't find it in the documentation.

Two documents that might help you with some possibilites are:
http://www.oracle.com/technology/products/jdev/howtos/10g/usingdatasources/using_datasources.html
and
http://otn.oracle.com/products/jdev/howtos/10g/dynamicjdbchowto.html

Firmware Password Lock, Managing Firmware Updates

I want to increase my data security beyond account password protection. (Ran FileVault previously but encountered a disaster - user account information became corrupted somehow. Password would be accepted but login denied with an error message but no code. Ouch.)
Firmware Password Lock looks to me like a good bump up in security (I know it's not in the same league as FileVault from experience). I'm thinking I'll have to settle for this less secure option.
Please help me to understand possible pitfalls beyond the obvious "retain the password".
Will Firmware updates continue to come in normally with Software Update? Please help. Tony

nublu wrote:
Thank you for helping with my security question. I have googled a bit. I have found examples of physical damage to computers (new mother board needed) because of failure to get firmware update before upgrading OS. In that case it was upgrade to OS10 from OS9. This doesn't directly apply to my case, never the less, it does cause me to pause.
Is it correct that if firmware password lock is enabled, firmware updates will load and install without unlocking firmware.
I'm not sure about this. a firmware update will always come with instructions and if the firmware password needs to be turned off to install it, this will be explicitly mentioned. as turning the firmware password off is very easy and firmware upgrades are very rare, this should not be a consideration IMO.
(sorry for asking again - just trying to be sure. Could not find a specific answer to this in apple support info.)
I did find this recommendation to check for and load firmware updates outside of Software Update.
http://support.apple.com/kb/HT1237
Please tell me if this is recommended.
there is absolutely nothing wrong with downloading an update manually.

RCA Managed SID users password locked

Similar Messages

Maybe you are looking for