RCA Setup for TREX System

Hello All,
Can you guide how to do the RCA Setup for TREX System?
Thanks in advance.

Hi Rahul,
I would suggest to go through http://service.sap.com/diagnostics -> SolMan in Detail -> E2E Root Cause Analysis + Media Library
All the required documentation is available. A brief overview of steps would be:
- Registering TREX/BWA onto the SLD
- Model the TREX/BWA in the SMSY
- Diagnsotics agent setup on the TREX host
- Proceed with RCA activities.
Regards,
Srikishan

Similar Messages

EarlyWatch setup for TREX

Hi All,
I would like to know is there any guide to configure EarlyWatch report for TREX? Please advice.
Thanks and Regards

Hi
There are other way to monitor your trex instance with in solution manager
pls chk this [TREX in Solution Manager|TREX in Solution Manager]
and [http://help.sap.com/saphelp_sm32/helpdata/en/40/937d7d66156365e10000000a114cbd/content.htm|http://help.sap.com/saphelp_sm32/helpdata/en/40/937d7d66156365e10000000a114cbd/content.htm]
jansi

No data in Workload Analysis overview in E2E Analysis for TREX

Hi,
I'm not getting any data in E2e Workload analysis Overview screen for TREX system. Data is available in all other screens and extractors are running fine. I'm using Solution Manager 7.1 SP10. Kindly help me.
Regards,
Pragadees

Hi Pragadeesh,
Your system landscape definition in SMSY seems to be wrong. The products selected at the Setup Wizard for the managed system must exist in SMSY in order to run the extractos correctly.
Please refer to the Root Cause Analysis Landscape Guide available
at http://service.sap.com/diagnostics -> media library for additional information.
1) Upgrade CIM model according to note 669669.
2) Download the latest version of note 1468591 and apply it using SNOTE
3) Check note 1259109, download the latest configuration file and apply it
Additionally, it is highly recommended to patch your LM-SERVICE SP09
with the latest patch (1) according to note 1599627.
Thanks
Vikram

Configuration of EWA reports for java systems.

Hello,
I am facing a problem with configuration of EWA reports for SAP NW Portal.
I have already configured EWA for abap systems, and those are running good on weekly basis. but i have problem with configuration of reports for java systems.
So far, i have installed an SMD agent and CA on my EP-satellite system. I have also configured and SMD server on my Sollution Manager and registered the SMD agent on SMD server and installed Willy Introscope on SMD server.
I am using a central SLD which is running on different host as Solution Manager. I did all the configuration (smsy_setup, configuration of sld_data_supplier etc... )
I have also created the system in SMSY, matched the smsy with SLD and assigned Logical component to java system.
So far, so good according to manuals but when i want do define data collection in the SMD for Gargage Collection (task in scheduler) i cannot see host of my portal system.
I can see only the hosts (scheduler tasks ) of all abap system for which the EWA reports have already been generated.
Am i missing something?
Some configuration in SMD?
My solution manager is running on Sap NW 7.0, SPS16,
Sattelite system NW 7.0 EP, SPS 6 (planning to SPS 19)
Thank you for your advices!!!

Hi Suveer,
I did the configuration before. I forgot to mention it.
I found this errors in Diagnostic Setup, maybe this could be the cause of the issue.
Step BI Details
Cannot invoke CCMSBISETUP on host localhost
!! Exception : An exception occured during the execution of this function 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC'.(cause=com.sap.sup.admin.abap.rfc.exception.RfcExecutionException The function named 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC' doesn't exist!)
Exceptions
com.sap.sup.admin.abap.rfc.exception.RfcExecutionException: An exception occured during the execution of this function 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC'.
at com.sap.sup.admin.abap.rfc.function.RfcFunction.execute(RfcFunction.java:92)
at com.sap.sup.admin.setup.AbapSysRfcAdapter.setupBIConfiguration_ccmsBiSetup(AbapSysRfcAdapter.java:743)
at com.sap.sup.admin.setup.AbapSysRfcAdapter.setupBIConfiguration_ccmsBiSetup(AbapSysRfcAdapter.java:727)
at com.sap.sup.admin.setup.ManagingServices.startCcmsBiSetup(ManagingServices.java:2686)
at com.sap.sup.admin.setup.SetupStep.execute(SetupStep.java:334)
at com.sap.smd.agent.plugins.remotesetup.SapInstance.setup(SapInstance.java:304)
at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.setupSMDServer(ConfirmationView.java:378)
at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.onActionSetupServer(ConfirmationView.java:211)
at com.sap.sup.admin.setup.wizard.monitoring.wdp.InternalConfirmationView.wdInvokeEventHandler(InternalConfirmationView.java:278)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: com.sap.sup.admin.abap.rfc.exception.RfcExecutionException: The function named 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC' doesn't exist!
at com.sap.sup.admin.abap.rfc.function.RfcFunction.execute(RfcFunction.java:62)
... 37 more
And also this one>>
Step RFC Details
Failed to create TCP/IP RFC on ABAP side (SM59)
!! Exception : Source system cannot be set to Unicode , error key: RFC_ERROR_SYSTEM_FAILURE
Exceptions
com.sap.aii.proxy.framework.core.BaseProxyException: Source system cannot be set to Unicode , error key: RFC_ERROR_SYSTEM_FAILURE
at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
at com.sap.sup.admin.setup.abapproxy.tcpiprfc.TcpIpRfcProxy_PortType.inst_Create_Tcpip_Rfcdest(TcpIpRfcProxy_PortType.java:16)
at com.sap.sup.admin.setup.ManagingServices.createTcpIpRFC(ManagingServices.java:663)
at com.sap.sup.admin.setup.ManagingServices.createTcpIpRFC(ManagingServices.java:637)
at com.sap.sup.admin.setup.SetupStep.execute(SetupStep.java:300)
at com.sap.smd.agent.plugins.remotesetup.SapInstance.setup(SapInstance.java:304)
at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.setupSMDServer(ConfirmationView.java:378)
at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.onActionSetupServer(ConfirmationView.java:211)
at com.sap.sup.admin.setup.wizard.monitoring.wdp.InternalConfirmationView.wdInvokeEventHandler(InternalConfirmationView.java:278)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
And in the troubleshooting setup for managed systems, i can see that no initial upload was found form the SMD agent which is running on Java System.
Thanks a lot for your remarks

Willy Setup for MDM

Hello Gurus,
While configuring SMD setup for MDM system, i am getting following error, for MDIS and MDSS
[Wilyhost Agent] Failed to configure EP Agent for sapkrftmox01.krft.net (MDM Host)
My MDM system is not an EP system, strainge how am i getting this error related to EP.
Also in the Local SMD Agent Application log on MDM Host getting the error
[Thread[Thread-14,5,main]] Warning    com.sap.smd.wily.hostagent.action.AbstractAction - run(): Action SAPOsCol not running because status is PERMANENT_ERROR
[Thread[Thread-23,5,main]] Warning    com.sap.smd.wily.hostagent.action.SapOsColAction - launchDaemon(): launchDaemon: saposcol exited with -1
[Thread[ExecutionRunner_4,5,ExecMgrThreadGroup]] Warning    com.sap.smd.wily.hostagent.destination.ProcessReader - readOutput: Error output: prtdiag can only be run in the global zone
Need the help...please....
Regards
Manoj

Hi
Implement SAP Note 1466312

SMD Setup for MDM

Hello Gurus,
While configuring SMD setup for MDM system, i am getting following error, for MDIS and MDSS
[Wilyhost Agent] Failed to configure EP Agent for sapkrftmox01.krft.net (MDM Host)
My MDM system is not an EP system, strainge how am i getting this error related to EP.
Also in the Local SMD Agent Application log on MDM Host getting the error
[Thread[Thread-14,5,main]] Warning    com.sap.smd.wily.hostagent.action.AbstractAction - run(): Action SAPOsCol not running because status is PERMANENT_ERROR
[Thread[Thread-23,5,main]] Warning    com.sap.smd.wily.hostagent.action.SapOsColAction - launchDaemon(): launchDaemon: saposcol exited with -1
[Thread[ExecutionRunner_4,5,ExecMgrThreadGroup]] Warning    com.sap.smd.wily.hostagent.destination.ProcessReader - readOutput: Error output: prtdiag can only be run in the global zone
Need the help...please....
Regards
Manoj

Hi,
Can you check your SAP OS Collector is running (SSAPOSCOL)?
What is your Solman version?
Thanks,
Pradeep

Need detail information, steps would be nicer, to upgrade from Exchange 2003 to Exchange 2010 to setup in test system first then try on production, since not much room for downtime, thanks bekir

Need detail information, steps would be nicer, to upgrade from Exchange 2003 to Exchange 2010 to setup in test system first then try on production, since not much room for downtime, thanks bekir

Hi,
Overview of the upgrade progress from Exchange 2003 to Exchange 2010 including the following steps:
Installing Exchange 2010 within your organization on new hardware.
Configuring Exchange 2010 Client Access.
Creating a set of legacy host names and associating those host names with your Exchange 2003 infrastructure.
Obtaining a digital certificate with the names you'll be using during the coexistence period and installing it on your Exchange 2010 Client Access server.
Associating the host name you currently use for your Exchange 2003 infrastructure with your newly installed Exchange 2010 infrastructure.
Moving mailboxes from Exchange 2003 to Exchange 2010.
Decommissioning your Exchange 2003 infrastructure.
For more details, please refer to this following document.
http://technet.microsoft.com/en-us/library/ff805040(v=exchg.141).aspx
Best Regards.

System monitoring setup for j2ee

Hello,
I am seeting up system monitoring in my solution manager7.0 for XI systems. I am able to configure abap engine but not j2ee. whenver i clicked on active check mark for dispatcher and server hearbeat it is turning to red colour where as user defined alert i am able to configure. When i click on dispatcher heart beat and try to open properties it is telling you cann ot maintain properties. Could someone guide me to setup system monitoring for j2ee.
Thanks,
Kiran.

Check
http://service.sap.com/diagnostics
Did you set up the SMD agent on your XI system?
Markus

E2E RCA for Legacy systems

Hi All,
I am going to implement RCA for legacy systems. What steps need to be considered to implement it on legacy systems.
Where can i find document for this?
Your help will be appreciated.
Thanks,
Rohan

Hi Rohan,
You can get ref. from Solution manager master config. guide .
http://service.sap.com/~form/sapnet?_SCENARIO=01100035870000000112&_SHORTKEY=00200797470000075728&_OBJECT
thanks
Gyan

I am looking for a system to balance a rotor of turbocharger running at high speed at the minute i use a soundcard base system but am looking to upgrade can anyone recomend a setup thanks

hello i am looking to upgrade my balancing system,at the minute i use a soundcard base system but looking for a system that may improve my resaults i use the system to balance turbo charger spindles can anyone recomend a system?

Duplicate Post.
Please don't start a new thread with the same question!

Unable to configure Mail setup for SMTP : Please Help

Hi experts,
             I have been trying since 2 weeks with most of the links like help.sap.com, and other links which experts are sugested, but then also I am uable to configure the mail setup for a SMTP server from SAP R/3 4.7EE.
          Couls anyone help me please,
Challenge: I want to send mails from SAP system to other internet servers or mail servers.
                SMTP server is installed,
                 SAP R/3 4.7ee is in place.
I request you experts please provide the exact step by step procedure to configure, so that I should not run behind the links.
Thanks in advance,
Sunil

Hi Juan, Hi Juan,
             Thanks for your reply, I am happy that one big hope has come. regarding my issue its starts from the SCOT configuration, I have created the Node, and under support address types selected INTERNET type.
Under INTERNET settings
address area = *mail
have not mentiond RFC destination.
Hope this info will guide you my issue.
Thanks in advance,
Sunil

SSL Certificate setup for Web/Address Book/iCal in 10.7 Lion?

I know nothing about certificates. I plan to use my Mini server to help manage my family's computers which are pretty spread out across the U.S. My plan is to use profile manager for device management, host a couple websites (one secure for home security cams) and share address books and calendars. This is as much a geek gadget project as it is "useful" so I understand I may be creating some work for myself
Anyway, can someone walk me through the correct setup for certificates? My research is showing me a LOT of options/parameters. Due to the expense, i don't want to create one just to find it won't serve my purposes.
Also, I think i'm going with RapidSSL...$50 is the cheapest I've come across...hopefully the offer what I need?

I have just spent 30 minutes on the phone to a pleseant chap in Athens, and now have a solution.
We tried several options and the final one worked - so simple.
Click on the apple symbol > system preferences > iCloud > disable contact sync > keep contacts
Check search, in my case it worked for the first time in several weeks :-)
then re-enable contact sync as follows:
Click on the apple symbol > system preferences > iCloud > re-tick contacts > merge contacts
Search still works
Hallelujah!

Entry Channel setup for multiple company codes

Hello,
I have a question regarding the entry channel setup (for external requirements in the Plan-Driven Procurement scenario)
In previous implementations, I 've created an entry channel below each company code (as the documentation says it should be). Now, for each entry channel, there was a EBP user assigned, which corresponded to an RFC entry in the backend system (I was connecting EBP to multiple backend systems)
Now, what should I do in the following scenario?:
1. SRM is only connected to one backend system
2. There are 50 company codes
Does that mean I have to create 50 users (for each channel) plus 50 RFC connections in the R/3 system (each with a different user in the backend system), pointing to the same SRM system?
I was thinking of creating an Org iD in the SRM structure at the top (which would be the entry channel), assign only ONE user to it and then fill attribute BUK with all the company codes. However, I don't know if this will work, because the external requirement process might need the company code defined in the "Function" tab... =/
Any help would be greatly appreciated.
Regards,
Gilberto.

Hi Proyecto Genesis,
I am also configuring the Entry channel (org unit) for multiple company codes.
I tried your logic of defining the entry channel outside company code level. Assigned the BUK attribute and extended attribute for plants and storage locations.
Also in my case the local Pur org and Pur group is defined outside the company code. Is it correct?
However the system fails to transfer the external requisition to SRM.
SLG1 displays following error message.
"No address found for partner function type Ship-To Address"
So if I move the Entry channel (org unit) under any one company code level then the external requisitions are transferred correctly to SRM.
But then the issue is the requirements are not transferred with the backend Pur Org and Pur grp. Instead they are transferred to the Pur Org and Pur grp of the company code under which the entry channel is defined.
Can you please share how do we need to define the entry channel, local pur org and pur grp for multiple company codes scenario, so that the ECC requisitions are transferred with the correct company code, pur org and pur grp to SRM?
Or do we need to define Entry channel for each company code and RFC user actually mapping the same backend system?
Please guide.
Regards,
Sandeep

Best setup for a non-Mac file server?

I have a dual xeon server, with a SATA RAID5 I want to use as a file server in a cross-platform environment.
*What I've tried and the issues...*
At first I considered using Windows 2003 (Win2k3) but Services for Macintosh (SFM) is an older version of AFP and thus only supports 31 character filenames. With all our Macs supporting SMB/Samba/CIFS and Apple touting that "Macs and PCs can co-exist harmoniously on the same network" I figured I would give that a try.
SMB doesn't work.
Sure I can create a connection, but transferring files is a completely different story. I'm trying to backup application and system data, but companies such as Adobe and Apple have named some of their files with special characters that can't be transferred over SMB. I know NTFS doesn't support these characters, but I though a Linux box using SMB would work fine. It doesn't. It's the protocol which keeps me from transferring the data. I end up with the lovely error message of "You cannot copy some of these items to the destination because their names are too long or contain invalid characters for the destination..." (what's sad is, if you google for " because their names are too long or contain invalid characters for the destination" you only get 6 results.)
So I thought I would give NFS a try. Apple says "Viewed from Mac OS X, [connecting via NFS] is just like connecting to an Apple or Windows server." No. It's not. NFS shares don't even show up in the Finder's Network listing. There are also a pile of other hurdles which are only tackled by savvy, command-line using users.
So that leaves me with AFP. Win2k3 doesn't support filenames longer than 31 characters, and Win2k8 is dropping SFM altogether. Off to choose a *nix flavor, but that requires Netatalk. It hasn't been updated in years, it has many bad performance reviews... and most distros have removed it. I can download and install it. Oh, but that requires I get the kernel source files. Then I have to create an RPM an that's not working... now I'm several levels deep in trying to figure out how to get Netatalk working and I'm not even sure it will work.
*What's the best setup for a non-Mac file server?*
FreeNAS seems promising, but it's in alpha/beta and they have all sorts of warnings regarding potential data loss. Sure there's ExtremeZ-IP, but I really don't want to spend $675 do something Apple claims OS X can already do. I can put just about any non-Mac OS on this thing... what's the best way to set it up so it works?
Thanks much.

Rick may be right because although i didnt think of it before i tend to have notoriuosly long classnames for my php classes and i have used samba on occasion (when rsync is out of the question for one reason or another) and never had a problem. I use kubuntu (feisty at the moment )with an ext3 filesystem. if i have a chance this evening ill give it a try and see what happens.
You could also possibly use FUSE to use an ssh filesystem for the shares... i don tknow how that would figure in your back up though.
Also if worse comes to worse you could tar or dmg the the necessary files... just some thoughts.
Ill be interested to know what you end up implementing....
OH one last thought... Compile Darwin from source and use that as your server

Is possible control tape library slot 1 - 10 for file system backup

hi ..
i am new to osb , i just install and setup osb , i have a question as below , hope expert can help me
env: testing
rhel 5.5
tape library with 20 slot
file system backup
1. is possible osb only use slot 1 - 10 for file system backup ? amanda can control slot x - slot y for the configuration .
2. how do i label the tape for slot 1 - slot 10 by obtool ? how to control osb auto load the tape for next backup ? where to check the log say that next tape is tape-02 ?
thanks ..

hi dcooksey
how do i use list for a tape drive...for example, if you want tape drive A to only use slots 1-10 from obtool or webtool ?
becoz i new to backup solution & osb ( i always use ghost or acronis to clone the image ) , my thinking as below , pls correct me if i am wrong
slot 1 - 10 for daily backup
slot 11-16 for full system backup
slot 17 - 20 reserve ( this tape only use for full system backup before perform any application upgrade patches , )
daily backup mon - fri ( 2 week ) ( no backup on saturday and sunday ) , server application offline
full system backup friday ( 1 , 14 on calendar ) every 2 week perform full system backup after daily backup completed
for upgrade application ,
perform full system backup after daily backup , then release the server to application team to perform upgrading .
so how to set my media family for the above setting ? the slot configuration is control by media family ?
hope you can help ...

RCA Setup for TREX System

Similar Messages

Maybe you are looking for