RCOPCA02 GLPCA
Hello
I have a problem using report RCOPCA02,
when i double click a line to have an output list it takes a long time.
The problem could be the raise of table GLPCA and through the note 212964 the only solution , i suppose, is
to create another index for this report.
The query is the following:
SELECT
"RCLNT" , "RLDNR" , "KOKRS" , "RYEAR" , "RBUKRS" , "RRCTY" , "RVERS" , "POPER" , "RTCUR" ,
"RUNIT" , "DRCRK" , "DOCCT" , "DOCNR" , "DOCLN" , "RPRCTR" , "RHOART" , "RFAREA" , "RACCT" ,
"HRKFT" , "RASSC" , "EPRCTR" , "ACTIV" , "AFABE" , "SBUKRS" , "SPRCTR" , "SHOART" , "SFAREA" ,
"TSL" , "HSL" , "KSL" , "MSL" , "CPUDT" , "CPUTM" , "USNAM" , "SGTXT" , "AUTOM" , "DOCTY" ,
"BLDAT" , "BUDAT" , "WSDAT" , "REFDOCNR" , "REFRYEAR" , "REFDOCLN" , "REFDOCCT" , "REFACTIV" ,
"AWTYP" , "AWORG" , "AWSYS" , "WERKS" , "GSBER" , "KOSTL" , "LSTAR" , "AUFNR" , "AUFPL" ,
"ANLN1" , "ANLN2" , "MATNR" , "BWKEY" , "BWTAR" , "ANBWA" , "KUNNR" , "LIFNR" , "RMVCT" ,
"EBELN" , "EBELP" , "KSTRG" , "ERKRS" , "PS_PSP_PNR" , "KDAUF" , "KDPOS" , "FKART" , "VKORG" ,
"VTWEG" , "AUBEL" , "AUPOS" , "SPART" , "VBELN" , "POSNR" , "VKGRP" , "VKBUR" , "LOGSYS" ,
"VERSA" , "STFLG" , "STOKZ" , "STAGR" , "GRTYP" , "REP_MATNR" , "CO_PRZNR" , "IMKEY" , "DABRZ" ,
"RSCOPE" , "BWART" , "BLART"
FROM
"GLPCA"
WHERE
"RLDNR" = :A0 AND "RRCTY" IN ( :A1 , :A2 ) AND "RVERS" = :A3 AND "KOKRS" = :A4 AND "RYEAR" = :A5
AND "RACCT" = :A6 AND "POPER" BETWEEN :A7 AND :A8 AND ( ( "ACTIV" BETWEEN :A9 AND :A10 OR "ACTIV"
BETWEEN :A11 AND :A12 OR "ACTIV" BETWEEN :A13 AND :A14 OR "ACTIV" BETWEEN :A15 AND :A16 ) OR
"ACTIV" IN ( :A17 , :A18 ) ) AND "RCLNT" = :A19#
and it uses this index:
RYEAR
POPER
RBUKRS
RACCT
it has an estimate cost too high. i'd like to reduce it. which index do you suggest for this activity? my doubt is about the field RCLNT that is at the end of the query...it sounds strange....anyway any help is appeciated...
thanks a lot
Nick
Hi,
what fiels does the YBA index consist of? (RYEAR POPER RBUKRS RACCT )?
WHERE "RLDNR" = :A0
AND "RRCTY" IN ( :A1 , :A2 )
AND "RVERS" = :A3
AND "KOKRS" = :A4
AND "RYEAR" = :A5
AND "RACCT" = :A6
AND "POPER" BETWEEN :A7 AND :A8
AND ( ( "ACTIV" BETWEEN :A9 AND :A10
OR "ACTIV" BETWEEN :A11 AND :A12
OR "ACTIV" BETWEEN :A13 AND :A14
OR "ACTIV" BETWEEN :A15 AND :A16 )
OR "ACTIV" IN ( :A17 , :A18 ) )
AND "RCLNT" = :A19
In SE16 you can check which of the above variables limit the resultset most.
Normally these coloumns should be indexed.
Again: How big is the result set of your query? (What is the time per record?)
Kind regards,
Hermann
Similar Messages
-
ABAP Dump while Changing the Layout fields in Report output - RCOPCA02
Hi,
I Copied the Standard Program RCOPCA02 to ZRCOPCA02. I added two new fields(AUART, AUGRU) in the report output. It is executing correctly with default layout, While Changing the layout for displaying new fields it is dumping.
I am not understanding, What should i do...
Here is the Code.
report ZRCOPCA02 no standard page heading message-id km
line-count (2) line-size 81.
type-pools: slis, ecarc.
DDIC-Tabellen *******************************************************
tables: glpca, "Einzelposten / Ist
glu1, "Übergabestruktur FI-SL-Anzeige
t000,
tka01,
sscrfields,
vbak.
Variablen und int. Tabellen *****************************************
data: l_vbeln like vbak-vbeln,
l_auart like vbak-auart,
l_augru like vbak-augru.
data: afield type slis_fieldcat_alv,
sp_group type slis_sp_group_alv,
t_listheader type slis_t_listheader with header line,
t_layout type slis_layout_alv,
t_fieldcat type slis_t_fieldcat_alv,
t_spec_groups type slis_t_sp_group_alv,
event type slis_alv_event,
t_events type slis_t_event,
g_variant like disvariant,
gx_variant like disvariant,
g_exit(1) type c,
g_save(1) type c,
g_repid like sy-repid,
msgtyp like sy-msgty,
lt_dynpread like dynpread occurs 1 with header line,
ls_rpcak like rpcak, "note 0310592
packsize type i value 1000,
text1(60) type c,
text2(60) type c,
oldkokrs like glpca-kokrs,
oldracct like glpca-racct.
data: whr_size type i value 50,"Maximum of single values per MIC 46a
"charact. in the where-clause of the select-statement
lines type i, "number of lines of range table MIC 46a
cnt_rldnr type i, "Zähler Anzahl selektierter Ledger
cnt_kokrs type i, "Zähler Anzahl selektierter KoReKreise
cnt_poper type i, "Zähler Anzahl selektierter Perioden
cnt_ryear type i, "Zähler Anzahl selektierter GeschJahre
cnt_rvers type i, "Zähler Anzahl selektierter Versionen
cnt_bukrs type i, "Zähler Anzahl selektierter BuKreise
empge like dkobr-empge,
ksl_curr like tka01-pcacur,
hsl_curr like t001-waers,
a_rec like rstirec.
data: begin of dim_data.
include structure rgcdi. "data for dimensions
data: end of dim_data.
data: begin of tab_fields occurs 80,
name like dntab-fieldname, "fields in table i_glpca
end of tab_fields.
data: begin of i_glpca occurs 0.
include structure rpca2.
data: racct_ktext like rpcak-ktext,
psppp like prps-posid,
v_auart like vbak-auart,
v_augru like vbak-augru,
end of i_glpca.
data: rw_subrc like sy-subrc, "Flag: Report-Writer-Schnittstelle
re_subrc like sy-subrc, "Flag: Recherche-Schnittstelle
subrc like sy-subrc.
data: set_id like sethier-setid, "Set-ID "RDI_SETS_4.0
set_class like sethier-setclass, "Setklasse "RDI_SETS_4.0
set_sname like sethier-shortname."Setname (24) "RDI_SETS_4.0
data: authorised(1),
s_message(1),
auth_dbcount like sy-tabix,
Hex-Konstanten für Minimum/Maximum-Werte
begin of hex00,
x1(12) type c,
x2(12) type c,
end of hex00,
begin of hexff,
x1(12) type c,
x2(12) type c,
end of hexff.
ranges rclnt for glpca-rclnt.
field-symbols: type ecarc_glpca_curr.
Selektionsoptionen *************************************************
select-options:
rldnr for glpca-rldnr default '8A' no-display,
rassc for glpca-rassc no-display,
rrcty for glpca-rrcty default 0,
rrcty for glpca-rrcty,
rvers for glpca-rvers default '000',
kokrs for glpca-kokrs memory id cac,
bukrs for glpca-rbukrs memory id buk,
poper for glpca-poper default sy-datlo+4(2),
ryear for glpca-ryear default sy-datlo,
poper for glpca-poper,
ryear for glpca-ryear,
prctr for glpca-rprctr matchcode object prct,
pprctr for glpca-sprctr matchcode object prct,
RACCT FOR GLPCA-RACCT MATCHCODE OBJECT KART, "RD_P30K128304
racct for glpca-racct, "RD_P30K128304
drcrk for glpca-drcrk,
activ for glpca-activ,
rhoart for glpca-rhoart,
rfarea for glpca-rfarea,
stagr for glpca-stagr,
rtcur for glpca-rtcur,
runit for glpca-runit,
versa for glpca-versa no-display,
eprctr for glpca-eprctr no-display,
afabe for glpca-afabe no-display,
rmvct for glpca-rmvct no-display,
hrkft for glpca-hrkft no-display, "note 550972
sbukrs for glpca-sbukrs no-display, "note 550972
shoart for glpca-shoart no-display, "note 550972
sfarea for glpca-sfarea no-display, "note 550972
docct for glpca-docct,
docnr for glpca-docnr,
refdocct for glpca-refdocct,
refdocnr for glpca-refdocnr,
werks for glpca-werks,
repmatnr for glpca-rep_matnr matchcode object pca_shlp_rep_matnr,
rscope for glpca-rscope.
parameters: no_rrint no-display default ' '." skip "MICP40K066037
" report-report-interface
display variant ">>MICP40K039857
selection-screen begin of block 0 with frame title text-e01.
parameters: p_vari like disvariant-variant.
selection-screen comment 47(40) varname for field p_vari.
selection-screen end of block 0.
parameters log_grp(4) type c no-display default 'KE5Z'.
"<<MICP40K039857
ranges: v_racct for glpca-racct,
v_prctr for glpca-rprctr,
v_pprctr for glpca-sprctr.
Tabelle mit Werten aus den Berichts-Set vom Report-Writer *
data begin of val_tab occurs 50.
include structure rgciv.
data end of val_tab.
MICP30K166368
feldkatalog und interface für bb-schnittstelle rw MICP30K166368
MICP30K166368
"MICP30K166368
data begin of bbs_fieldtab occurs 20. "MICP30K166368
include structure rstifields. "MICP30K166368
data end of bbs_fieldtab. "MICP30K166368
archiv
type-pools: rsds.
types: begin of ty_archive_objects,
object like arch_obj-object,
end of ty_archive_objects,
ty_t_archive_objects type ty_archive_objects occurs 2.
constants: lc_set type c value 'X',
lc_report type progname value 'KE5Z',
lc_reporttype type reporttype value 'TR'.
tables: admi_files.
select-options lr_files for admi_files-archiv_key no-display.
parameter: read_db type c default 'X' no-display,
read_ar type c no-display,
arc_obj like arch_obj-object no-display,
read_as type c default 'X' no-display.
data : lt_arch_obj type ty_t_archive_objects with header line,
ls_selections type rsds_frange,
lt_selections type rsds_frange_t,
ls_selopt type rsdsselopt,
lt_glpca_archiv type ecarc_t_glpca_curr.
*********************************************************>>MICP40K039857
INITIALIZATION
initialization.
Diverse Initialisierungen
perform init_vars.
g_repid = sy-repid.
Set default values for record type
rrcty-sign = 'I'.
rrcty-option = 'EQ'.
rrcty-low = '0'.
append rrcty.
rrcty-low = '2'.
append rrcty.
Set default values for period and year (if kokrs or bukrs is known)
get parameter id 'BUK' field bukrs-low.
get parameter id 'CAC' field kokrs-low.
if kokrs-low is initial "get contr. area from company code
and not bukrs-low is initial.
call function 'KOKRS_GET_FROM_BUKRS'
exporting
i_bukrs = bukrs-low
importing
e_kokrs = kokrs-low
exceptions
no_kokrs_found = 1
others = 2.
if sy-subrc <> 0.
clear kokrs-low.
endif.
endif.
if not kokrs-low is initial.
call function 'K_KOKRS_READ' "get fiscal year variant
exporting
kokrs = kokrs-low
importing
e_tka01 = tka01
exceptions
not_found = 1
not_found_gjahr = 2
others = 3.
if sy-subrc = 0.
call function 'G_PERIOD_GET'
exporting
date = sy-datlo
variant = tka01-lmona
importing
period = poper-low
year = ryear-low
exceptions
ledger_not_assigned_to_company = 1
period_not_defined = 2
variant_not_defined = 3
others = 4.
if sy-subrc = 0.
poper-sign = 'I'.
poper-option = 'EQ'.
append poper.
ryear-sign = 'I'.
ryear-option = 'EQ'.
append ryear.
endif.
endif.
endif.
Settings for display variants
g_save = 'A'. "Schalter Varianten benutz./allg. speichern
clear g_variant.
g_variant-report = g_repid.
g_variant-log_group = log_grp.
g_variant-username = sy-uname.
Get default variant
gx_variant = g_variant.
call function 'REUSE_ALV_VARIANT_DEFAULT_GET'
exporting
i_save = g_save
changing
cs_variant = gx_variant
exceptions
not_found = 2.
if sy-subrc = 0.
p_vari = gx_variant-variant.
endif.
Set variant
if p_vari is initial.
p_vari = '1SAP'.
move p_vari to gx_variant-variant.
call function 'REUSE_ALV_VARIANT_EXISTENCE'
exporting
i_save = g_save
changing
cs_variant = gx_variant
exceptions
not_found = 1.
if sy-subrc ne 0.
clear p_vari.
clear gx_variant-variant.
endif.
endif.
varname = gx_variant-text.
"<<MICP40K039857
archiv
call function 'KARL_DATA_INPUT_INIT'
exporting
i_report = lc_report
i_reporttype = lc_reporttype
importing
e_xusedb = read_db
e_xusear = read_ar
e_archobj = arc_obj
e_infosys = read_as
tables
t_arch_sel = lr_files.
data: lt_excluding like sy-ucomm occurs 0 with header line.
call function 'RS_SET_SELSCREEN_STATUS'
exporting
p_status = 'SELSCREEN'
p_program = 'RCOPCA02'
tables
p_exclude = lt_excluding.
Initialisieren der Bericht/Bericht-Schnittstellen *
data: ld_no_rrint type boole_d. "note 490484 begin
import rri = ld_no_rrint from memory id 'RCOPCA02_NO_RRI'.
if ld_no_rrint = 'X'.
free memory id 'RCOPCA02_NO_RRI'.
else. "note 490484 end
call function 'G_REPORT_INTERFACE_INIT' "Report-Writer?
exporting "MICP30K166368
table = 'GLPCT' "MICP30K166368
importing
subrc = rw_subrc "MICP30K166368
tables "MICP30K166368
it_fieldr = bbs_fieldtab. "MICP30K166368
call function 'RSTI_APPL_STACK_POP'"oder Recherche?
importing
i_rec = a_rec
exceptions
appl_stack_not_initialized = 1.
re_subrc = sy-subrc.
if re_subrc = 0.
check Receiver is this report
if not ( ( a_rec-rtool = 'RT' and a_rec-ronam = 'RCOPCA02' )
or ( a_rec-rtool = 'TR' and a_rec-ronam = 'KE5Z' ) ) .
re_subrc = 2.
endif.
endif.
endif.
AT SELCTION-SCREEN on value request**********************************
*at selection-screen on value-request for racct-low. "RD "4.6a
"RD "4.6a
call function 'K_RACCT_VALUE_REQUEST' "RD "4.6a
importing "RD "4.6a
e_racct = racct-low. "RD "4.6a
"RD "4.6a
"RD "4.6a
*at selection-screen on value-request for racct-high. "RD "4.6a
"RD "4.6a
call function 'K_RACCT_VALUE_REQUEST' "RD "4.6a
importing "RD "4.6a
e_racct = racct-high. "RD "4.6a
at selection-screen on value-request for p_vari. "MICP40K039857
perform f4_for_variant. "MICP40K039857
at selection-screen on value-request for poper-low. "RD "4.6a
begin of insertion note 522715
call function 'K_KOKRS_READ'
exporting
kokrs = kokrs-low
exceptions
not_found = 1
not_found_gjahr = 2
others = 3.
if sy-subrc = 0.
end of insertion note 522715
call function 'ECPCA_RPMAX_VALUE_REQUEST' "RD "4.6a
exporting "RD "4.6a
i_kokrs = kokrs-low "RD "4.6a
i_ryear = ryear-low "RD "4.6a
importing "RD "4.6a
e_rpmax = poper-low "RD "4.6a
begin of insertion note 522715
exceptions
table_empty = 1.
endif.
end of insertion note 522715
at selection-screen on value-request for poper-high. "RD "4.6a
begin of insertion note 522715
call function 'K_KOKRS_READ'
exporting
kokrs = kokrs-low
exceptions
not_found = 1
not_found_gjahr = 2
others = 3.
if sy-subrc = 0.
end of insertion note 522715
call function 'ECPCA_RPMAX_VALUE_REQUEST' "RD "4.6a
exporting "RD "4.6a
i_kokrs = kokrs-low "RD "4.6a
i_ryear = ryear-low "RD "4.6a
importing "RD "4.6a
e_rpmax = poper-high "RD "4.6a
begin of insertion note 522715
exceptions
table_empty = 1.
endif.
end of insertion note 522715
AT SELCTION-SCREEN ***************************************************
at selection-screen.
perform pai_of_selection_screen.
begin of insertion note 522715
if not kokrs-low is initial.
call function 'K_KOKRS_READ'
exporting
kokrs = kokrs-low
exceptions
not_found = 1
not_found_gjahr = 2
others = 3.
if sy-subrc <> 0.
message e101(ki) with kokrs-low.
endif.
endif.
end of insertion note 522715
archiv
if sy-ucomm = 'FC01' or sy-ucomm = 'UCDS'
or sy-ucomm = 'ONLI' and read_ar = 'X'
and read_as is initial and lr_files[] is initial.
if lt_arch_obj[] is initial.
lt_arch_obj-object = 'PCA_OBJECT'. append lt_arch_obj.
lt_arch_obj-object = 'EC_PCA_ITM'. append lt_arch_obj.
endif.
call function 'KARL_DATA_INPUT_SELECT'
exporting
i_db_and_arc = lc_set
i_infosys_possible = lc_set
i_object_fixed = 'V'
i_documentation = 'KARL_DATA_INPUT_SEL_KE5YZ'
i_report = lc_report
i_reporttype = lc_reporttype
tables
t_objects = lt_arch_obj
t_arch_sel = lr_files
changing
c_xusedb = read_db
c_xusear = read_ar
c_archobj = arc_obj
c_infosys = read_as.
endif.
START-OF-SELECTION **************************************************
start-of-selection.
Default-Werte löschen, falls Aufruf über Recherche
oder Report-Writer erfolgt ist
if no_rrint is initial and ld_no_rrint is initial. "note 490484
if rw_subrc eq 0 or re_subrc eq 0.
refresh: rldnr, rrcty, rvers, kokrs, bukrs, poper, ryear,
racct, prctr, pprctr, drcrk, activ, rhoart, rfarea,
versa, afabe, eprctr,
v_racct, v_prctr, v_pprctr.
clear: rldnr, rrcty, rvers, kokrs, bukrs, poper, ryear,
racct, prctr, pprctr, drcrk, activ, rhoart, rfarea,
versa, afabe, eprctr,
v_racct, v_prctr, v_pprctr.
endif.
Parameter einlesen über Report-Writer-Schnittstelle *
if rw_subrc eq 0.
perform rw_get_parameters.
oder Parameter einlesen über Recherche-Schnittstelle *
elseif re_subrc eq 0.
perform re_get_parameters.
endif.
endif.
if read_db = 'X'. " read from DB (archiv)
Bewegungsdaten einlesen und puffern...................................
call function 'SAPGUI_PROGRESS_INDICATOR'
exporting
text = 'Einzelposten selektieren'(p10).
Use dirty trick to mislead DB-optimizer
call function 'DB_DO_NOT_USE_CLIENT_INDEX'
exporting
value = sy-mandt
tables
mandttab = rclnt.
select (tab_fields) from glpca
client specified
package size packsize
APPENDING CORRESPONDING FIELDS OF TABLE i_glpcaO
into corresponding fields of table i_glpca
where rldnr in rldnr
and rrcty in rrcty
and rvers in rvers
and kokrs in kokrs
and rbukrs in bukrs
and ryear in ryear
and rassc in rassc
and hrkft in hrkft "note 550972
and sbukrs in sbukrs "note 550972
and shoart in shoart "note 550972
and sfarea in sfarea "note 550972
and racct in racct
and rprctr in prctr
and sprctr in pprctr
and poper in poper
and drcrk in drcrk
and activ in activ
and rhoart in rhoart
and rfarea in rfarea
and versa in versa
and eprctr in eprctr
and afabe in afabe
and rmvct in rmvct
and docct in docct
and docnr in docnr
and stagr in stagr
and rtcur in rtcur
and runit in runit
and refdocct in refdocct
and refdocnr in refdocnr
and werks in werks
and rep_matnr in repmatnr "RDIP40K020663
and rscope in rscope "RDIP40K020663
and rclnt in rclnt. "dirty trick to mislead DB-optimizer
if sy-dbcnt > 1.
text1 = sy-dbcnt.
condense text1.
concatenate text1 text-m01 into text2 separated by space.
call function 'SAPGUI_PROGRESS_INDICATOR'
exporting
text = text2. " ... Datensätze gelesen
endif.
endselect.
Entfernt nicht zugehörige Einträge....................................
loop at i_glpca where ( not rprctr in v_prctr )
or ( not sprctr in v_pprctr )
or ( not racct in v_racct ).
delete i_glpca.
endloop.
endif.
*archiv
if read_ar = 'X' and not
( read_as is initial and lr_files[] is initial ).
call function 'SAPGUI_PROGRESS_INDICATOR'
exporting
text = 'Lesen im Archiv'(p12).
define fill_lt_selections.
if not &2[] is initial.
clear ls_selections.
move &1 to ls_selections-fieldname.
loop at &2.
clear ls_selopt.
move-corresponding &2 to ls_selopt.
append ls_selopt to ls_selections-selopt_t.
endloop.
append ls_selections to lt_selections.
endif.
end-of-definition.
fill_lt_selections 'RLDNR' rldnr.
fill_lt_selections 'RRCTY' rrcty.
fill_lt_selections 'RVERS' rvers.
fill_lt_selections 'KOKRS' kokrs.
fill_lt_selections 'RBUKRS' bukrs.
fill_lt_selections 'POPER' poper.
fill_lt_selections 'RYEAR' ryear.
fill_lt_selections 'RPRCTR' prctr.
fill_lt_selections 'SPRCTR' pprctr.
fill_lt_selections 'RACCT' racct.
fill_lt_selections 'DRCRK' drcrk.
fill_lt_selections 'ACTIV' activ.
fill_lt_selections 'RHOART' rhoart.
fill_lt_selections 'RFAREA' rfarea. "note 401961
fill_lt_selections 'STAGR' stagr.
fill_lt_selections 'RTCUR' rtcur.
fill_lt_selections 'RUNIT' runit.
fill_lt_selections 'VERSA' versa.
fill_lt_selections 'EPRCTR' eprctr.
fill_lt_selections 'AFABE' afabe.
fill_lt_selections 'RMVCT' rmvct.
fill_lt_selections 'DOCCT' docct.
fill_lt_selections 'DOCNR' docnr.
fill_lt_selections 'REFDOCCT' refdocct.
fill_lt_selections 'REFDOCNR' refdocnr.
fill_lt_selections 'WERKS' werks.
fill_lt_selections 'REP_MATNR' repmatnr.
fill_lt_selections 'RSCOPE' rscope.
fill_lt_selections 'HRKFT' hrkft. "note 550972
fill_lt_selections 'SBUKRS' sbukrs. "note 550972
fill_lt_selections 'SHOART' shoart. "note 550972
fill_lt_selections 'SFAREA' sfarea. "note 550972
call function 'EC_PCA_SELECT_FROM_ARCHIVE'
exporting
i_selections = lt_selections[]
i_files_sequential_read = lr_files[]
importing
e_glpca = lt_glpca_archiv[]
exceptions
no_infostruc_found = 1.
if sy-subrc = 1.
message id sy-msgid type 'I' number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
clear i_glpca.
loop at lt_glpca_archiv assigning to i_glpca.
append i_glpca.
endloop.
endif.
if i_glpca[] is initial. "Info,nichts gefunden
message s000.
exit.
endif.
get texts for accounts ...............................................
sort i_glpca by kokrs racct.
loop at i_glpca assigning -racct_ktext = ls_rpcak-ktext.
endloop.
Liste mit Einzelposten geeignet sortieren.............................
call function 'SAPGUI_PROGRESS_INDICATOR'
exporting
text = 'Einzelposten sortieren'(p30).
if show_ref is initial.
sort i_glpca by rldnr ryear rbukrs rrcty rvers
docct docnr docln.
else.
sort i_glpca by rldnr kokrs ryear rbukrs rrcty rvers poper
refdocct refdocnr refdocln.
endif.
Berechtigungsprüfung und gemerkte Belege aufbereiten .................
call function 'SAPGUI_PROGRESS_INDICATOR'
exporting
text = 'Berechtigungsprüfungen'(p40).
clear: cnt_rldnr, cnt_kokrs, cnt_ryear, cnt_rvers, cnt_bukrs.
loop at i_glpca assigning .
Berechtigungscheck
perform check_repo_authority changing authorised.
if authorised is initial.
delete i_glpca.
s_message = 'X'.
zählen der Sätze ohne Berechtigung
auth_dbcount = auth_dbcount + 1.
else. "Weitere Bearbeitung nur für berechtigte Belege...
Zusätzlich merken der Anzahl der Ausprägungen
bestimmter Dimensionen
on change of -rbukrs
ct = '10'
importing
currency = hsl_curr.
endon.
externe Immobilienbezeichnung "ww/kb
on change of i_glpca-imkey.
if ( not -dabrz
I_length = 20
importing
e_empge = -konty.
endif.
CONCATENATE I_GLPCA-KONTY I_GLPCA-EMPGE INTO I_GLPCA-IMBEZ.
endif.
endon.
on change of i_glpca-dabrz.
call function 'REMD_IMKEY_TO_EMPGE'
exporting
i_imkey = i_glpca-imkey
i_dabrz = i_glpca-dabrz
i_length = 20
importing
e_empge = i_glpca-empge
e_konty = i_glpca-konty.
CONCATENATE I_GLPCA-KONTY I_GLPCA-EMPGE INTO I_GLPCA-IMBEZ.
endon.
Konvertierungsproblem mit PSP-Nummer bereinigen
if not -psppp.
endif.
endif.
Währungen in Hilfsfeldern speichern
if -ksl_curr = ksl_curr.
endif.
modify i_glpca.
endif.
endloop.
Nachricht, wenn nicht alle Einzelposten angezeigt werden.
if not s_message is initial.
message s407(km) with auth_dbcount.
endif.
EP ausgeben...........................................................
call function 'SAPGUI_PROGRESS_INDICATOR'
exporting
text = 'Einzelposten ausgeben'(p50).
t_layout-detail_initial_lines = 'X'.
t_layout-detail_popup = 'X'.
t_layout-f2code = 'PIC1'. "MICP40K039857
t_layout-get_selinfos = 'X'.
t_layout-group_change_edit = 'X'. "note 576149
perform fill_listheader.
perform fieldcat_fill.
perform spec_groups_fill.
perform events_fill. "MICP40K039857
">>MICP40K039857
call function 'K_KKB_LIST_DISPLAY'
exporting
i_callback_program = 'RCOPCA02'
i_callback_user_command = 'USR_CMD'
i_callback_top_of_page = 'TOP_OF_PAGE'
I_CALLBACK_END_OF_PAGE =
I_CALLBACK_END_OF_LIST =
i_callback_pf_status_set = 'SET_PF_STATUS'
I_CALLBACK_LAYOUT_SAVE =
I_CALLBACK_FIELDCAT_SAVE =
i_tabname = 'I_GLPCA'
is_layout = t_layout
it_fieldcat = t_fieldcat
I_FCTYPE = 'R'
IT_EXCLUDING =
it_special_groups = t_spec_groups
IT_SORT =
IS_SEL_HIDE =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
tables
t_outtab = i_glpca
exceptions
others = 1.
loop at i_glpca.
select single vbeln auart augru
into (l_vbeln, l_auart, l_augru)
from vbak where vbeln = i_glpca-aubel.
if sy-subrc = 0.
move l_auart to i_glpca-v_auart.
move l_augru to i_glpca-v_augru.
modify i_glpca.
endif.
endloop.
call function 'REUSE_ALV_GRID_DISPLAY'
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
exporting
I_INTERFACE_CHECK = ' '
i_callback_program = 'ZRCOPCA02'
i_callback_pf_status_set = 'SET_PF_STATUS'
i_callback_user_command = 'USR_CMD'
i_structure_name = 'I_GLPCA'
is_layout = t_layout
it_fieldcat = t_fieldcat
IT_EXCLUDING =
it_special_groups = t_spec_groups
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
i_default = 'X'
i_save = g_save
is_variant = g_variant
it_events = t_events
IT_EVENT_EXIT =
IS_PRINT =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
tables
t_outtab = i_glpca
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
"<<MICP40K039857
clear i_glpca.
*& Form CHECK_REPO_AUTHORITY
Check only new auth-object K_PCA *
--> p1 text
<-- p2 text
form check_repo_authority changing authorized like authorised.
fill structure for userexit in K_PCA_RESP_AUTHORITY_CHECK
data: auth like pca_i_auth. "46a MIC check K_PCA and G_GLTP
auth-bukrs = -rrcty.
clear authorized.
check PrCtr/account/activity
call function 'K_PCA_RESP_AUTHORITY_CHECK'
exporting
i_kokrs = -racct
i_vorgn = 'REPP'
i_actvt = '28'
i_auth = auth
i_no_dialog_message = 'X'
exceptions
no_authority = 1
data_missing = 2
others = 3.
if sy-subrc = 0. "ok
check ledger/version/record type
call function 'PCA_G_GLTP_AUTH_CHECK'
exporting
rldnr = -rrcty
exceptions
no_authorisation = 1
others = 2.
if sy-subrc = 0. "ok, User is authorized
authorized = 'X'.
endif.
endif.
endform. " CHECK_REPO_AUTHORITY
*& Form INIT_VARS
Initialisieren diverser Hilfsvariablen und -tabellen *
form init_vars.
data begin of nametab occurs 80. "Tabelle mit Feldern aus der RPCA2
include structure dntab.
data end of nametab.
select single * from t000
client specified
where mandt = sy-mandt.
refresh nametab.
call function 'NAMETAB_GET'
exporting
only = 'T'
tabname = 'RPCA2'
tables
nametab = nametab.
Übernehmen der Feldnamen, die auch in der GLPCA
vorkommen.
loop at nametab where fieldname ne 'KSL_CURR'
and fieldname ne 'HSL_CURR'
and fieldname ne 'EMPGE' "ww/kb
and fieldname ne 'KONTY'. "ww/kb
move nametab-fieldname to tab_fields-name.
append tab_fields.
endloop.
fill Fields of receiver for BBS "MIC46C
call function 'RSTI_REPORT_FIELDS_FIND'
exporting
e_repid = 'RCOPCA02'
e_type = 'R'
tables
it_fields = bbs_fieldtab.
correct fieldnames
read table bbs_fieldtab with key rfield = 'PRCTR'.
if sy-subrc = 0.
bbs_fieldtab-rfield = 'RPRCTR'.
modify bbs_fieldtab index sy-tabix.
endif.
read table bbs_fieldtab with key rfield = 'PPRCTR'.
if sy-subrc = 0.
bbs_fieldtab-rfield = 'SPRCTR'.
modify bbs_fieldtab index sy-tabix.
endif.
read table bbs_fieldtab with key rfield = 'BUKRS'.
if sy-subrc = 0.
bbs_fieldtab-rfield = 'RBUKRS'.
modify bbs_fieldtab index sy-tabix.
endif.
Unicode
class cl_abap_char_utilities definition load.
clear hex00 with cl_abap_char_utilities=>minchar.
clear hexff with cl_abap_char_utilities=>maxchar.
endform. " INIT_VARS
FORM FILL_LISTHEADER *
List-Header in Abhängigkeit der selektierten Daten *
form fill_listheader.
read table i_glpca index 1.
if sy-subrc ne 0.
exit.
endif.
t_listheader-typ = 'S'.
t_listheader-key = 'Ledger '(h01).
if cnt_rldnr <= 1.
t_listheader-info = i_glpca-rldnr.
else.
t_listheader-info = '*'.
endif.
append t_listheader.
t_listheader-typ = 'S'.
t_listheader-key = 'Kostenrechnungskreis'(h02).
if cnt_kokrs <= 1.
t_listheader-info = i_glpca-kokrs.
else.
t_listheader-info = '*'.
endif.
append t_listheader.
t_listheader-typ = 'S'.
t_listheader-key = 'Buchungskreis '(h03).
if cnt_bukrs <= 1.
t_listheader-info = i_glpca-rbukrs.
else.
t_listheader-info = '*'.
endif.
append t_listheader.
t_listheader-typ = 'S'.
t_listheader-key = 'Buchungsperiode '(h04).
if cnt_poper <= 1.
t_listheader-info = i_glpca-poper.
else.
t_listheader-info = '*'.
endif.
append t_listheader.
if cnt_ryear <= 1.
t_listheader-typ = 'S'.
t_listheader-key = 'Geschäftsjahr '(h05).
t_listheader-info = i_glpca-ryear.
append t_listheader.
endif.
t_listheader-typ = 'S'.
t_listheader-key = 'Version '(h06).
if cnt_rvers <= 1.
t_listheader-info = i_glpca-rvers.
else.
t_listheader-info = '*'.
endif.
append t_listheader.
endform. "fill_listheader
*& Form FIELDCAT_FILL
*& Aufbau des Feldkataloges für den K_KKB_LIST_DISPLAY, *
*& bzw REUSE_ALV_LIST_DISPLAY, *
*& weitere Infos enthält die FktBaustein-Doku *
form fieldcat_fill.
data: i type i value 0.
refresh t_fieldcat.
Ledger
if cnt_rldnr > 1.
add 1 to i.
clear afield.
afield-col_pos = i.
afield-fieldname = 'RLDNR'.
afield-no_sum = 'X'.
afield-no_out = 'X'.
afield-key = 'X'.
afield-ref_tabname = 'GLPCA'.
afield-sp_group = '1'.
append afield to t_fieldcat.
endif.
Satzart
add 1 to i.
clear afield.
afield-col_pos = i.
afield-fieldname = 'RRCTY'.
afield-no_sum = 'X'.
afield-ref_tabname = 'GLPCA'.
afield-no_out = 'X'.
afield-sp_group = '1'.
append afield to t_fieldcat.
Version
if cnt_rvers > 1.
add 1 to i.
clear afield.
afield-col_pos = i.
afield-fieldname = 'RVERS'.
afield-no_sum = 'X'.
afield-ref_tabname = 'GLPCA'.
afield-no_out = 'X'.
afield-sp_group = '1'.
append afield to t_fieldcat.
endif.
Periode
if cnt_poper > 1.
add 1 to i.
clear afield.
afield-col_pos = i.
afield-fieldname = 'POPER'.
afield-no_sum = 'X'.
afield-ref_tabname = 'GLPCA'.
afield-no_out = 'X'.
afield-sp_group = '1'.
append afield to t_fieldcat.
endif.
Geschäftsjahr
if cnt_ryear > 1.
add 1 to i.
clear afield.
afield-col_pos = i.
afield-fieldname = 'RYEAR'.
afield-no_sum = 'X'.
afield-ref_tabname = 'GLPCA'.
afield-no_out = 'X'.
afield-sp_group = '1'.
append afield to t_fieldcat.
endif.
Referenzbelegtyp
add 1 to i.
clear afield.
afield-col_pos = i.
afield-fieldname = 'REFDOCCT'.
afield-ref_tabname = 'GLPCA'.
afield-key_sel = 'X'.
afield-no_sum = 'X'.
afield-sp_group = '2'.
afield-seltext_s = 'Typ'(t01).
afield-seltext_m = 'Belegtyp'(t02).
afield-seltext_l = 'Ref.Belegtyp'(t03).
afield-outputlen = 3. "Platz für die Sterne der Zwischensummen
if not show_ref is initial.
afield-key = 'X'.
else.
afield-no_out = 'X'.
endif.
append afield to t_fieldcat.
Referenzbelegnummer
add 1 to i.
clear afield.
afield-col_pos = i.
afield-fieldname = 'REFDOCNR'.
afield-ref_tabname = 'GLPCA'.
afield-key_sel = 'X'.
afield-no_sum = 'X'.
afield-sp_group = '2'.
afield-seltext_s = 'Refbeleg'(t04).
afield-seltext_m = 'Refbelegnr'(t05).
afield-seltext_l = 'Ref.Belegnummer'(t06).
if not show_ref is initial.
afield-key = 'X'.
else.
afield-no_out = 'X'.
endif.
appendHi Prabhu,
You are right, problem is with Field Catalog...
When I use FM 'REUSE_ALV_GRID_DISPLAY' it is dumping...
When i tried with FM 'REUSE_ALV_LIST_DISPLAY' it is working perfectly....
how can i use FM 'REUSE_ALV_GRID_DISPLAY' without dumping????
do i need to pass any thing in FM????
Here is the dump:
Runtime Errors MESSAGE_TYPE_X
Occurred on 12/21/2006 at 01:03:24
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
Error analysis
Short text of error message:
Technical information about the message:
Message classe...... "0K "
Number.............. 000
User, transaction...
Language key........ "E"
Transaction......... "SE38 "
Program............. "SAPLSLVC "
Screen.............. "SAPLSLVC_FULLSCREEN 0500"
Screen line......... 3
Information on where termination occurred
The termination occurred in the ABAP program "SAPLSLVC " in "LINE_OUT_NEW_2".
The main program was "ZRCOPCA02 ".
The termination occurred in line 918 of the source code of the (Include)
program "LSLVCF01 "
of the source code of program "LSLVCF01 " (when calling the editor 9180).
Source code extract
008880 gs_roid-row_id = rs_row-index * -1.
008890 endif.
008900 gs_roid-sub_row_id = rs_row-rowtype+7(10).
008910 gs_poid-row_id = gs_roid-row_id.
008920 gs_poid-sub_row_id = gs_roid-sub_row_id.
008930 gs_poid-rowtype = rs_row-rowtype.
008940 gs_poid-index = rs_row-index.
008950 insert gs_poid into table rt_poid.
008960 endif.
008970 append gs_roid to rt_roid.
008980
008990 loop at rt_fieldcat assigning <ls_fieldcat> where tech ne 'X' and
009000 no_out ne 'X'.
009010
009020 if gflg_invisible = 'X'.
009030 if <ls_fieldcat>-do_sum is initial.
009040 clear gflg_invisible.
009050 continue.
009060 else.
009070 clear g_col_counter.
009080 clear gflg_invisible.
009090 endif.
009100 endif.
009110
009120 clear gs_lvc_data.
009130 clear g_style.
009140
009150 assign component
009160 <ls_fieldcat>-fieldname of structure rt_data to <g_field>.
009170 if sy-subrc ne 0.
> message x000(0k).
009190 endif.
009200
009210 g_col_counter = g_col_counter + 1.
009220
009230 gs_lvc_data-row_pos = r_row_counter.
009240 gs_lvc_data-col_pos = g_col_counter.
009250 gs_lvc_data-row_id = gs_roid-row_id.
009260 gs_lvc_data-sub_row_id = gs_roid-sub_row_id.
009270
009280 * Endtotal and average
009290 if rs_row-rowtype(1) ca 'T' and <ls_fieldcat>-do_sum = 'C'.
009300 * save the actual grouplevel information
009310 gs_grouplevels = rs_grouplevels.
009320 clear g_lines.
009330
009340 * get number of lines of the collect table
009350 describe table rt_data lines g_lines.
009360 * if there is only one line or the field has no references so
009370 * that only the first line has to be considered
Thanks,
fractal
null -
GLPCA table fetch - time out issue
Hi,
I have a situation in which one of my business user is facing a TIME OUT in RCOPCA02 report in the below piece of code.
SELECT (tab_fields) FROM glpca
CLIENT SPECIFIED
PACKAGE SIZE packsize
APPENDING CORRESPONDING FIELDS OF TABLE i_glpca
WHERE rldnr IN rldnr
AND rrcty IN rrcty
AND rvers IN rvers
AND kokrs IN kokrs
AND rbukrs IN bukrs
AND ryear IN ryear
AND rassc IN rassc
AND hrkft IN hrkft "note 550972
AND sbukrs IN sbukrs "note 550972
AND shoart IN shoart "note 550972
AND sfarea IN sfarea "note 550972
AND racct IN racct
AND rprctr IN prctr
AND sprctr IN pprctr
AND poper IN poper
AND drcrk IN drcrk
AND activ IN activ
AND rhoart IN rhoart
AND rfarea IN rfarea
AND versa IN versa
AND eprctr IN eprctr
AND afabe IN afabe
AND rmvct IN rmvct
AND docct IN docct
AND docnr IN docnr
AND stagr IN stagr
AND rtcur IN rtcur
AND runit IN runit
AND refdocct IN refdocct
AND refdocnr IN refdocnr
AND werks IN werks
AND rep_matnr IN repmatnr "RDIP40K020663
AND rscope IN rscope "RDIP40K020663
AND rclnt IN rclnt. "dirty trick to mislead DB-optimizer
packsize is set to 1000
But when I try to execute the same using the same variant as used by user I am able to get the output in less than 2 mins. The maximum runtime of a program is set as 900 seconds(which I understand is always same across all users). The issue of TIME_OUT is faced by that particular user only.
My SAP system is SAP_APPL46C. Latest support package implemented is SAPK-91404INDMIS.
What can be the issue? Please suggest.
Regards,
ChinmayYou should run ST05 in parallel with both you and the user with the problem and see what the differences are in the plan.
You cannot get a good answer with the data you have provided.
Please see Please Read before Posting in the Performance and Tuning Forum before posting
Rob
Edited by: Rob Burbank on Sep 30, 2011 9:15 AM -
Dear Experts,
I want to include Production and Sales Quantities in Profit Center Report but i am not able to do so because this data is placed in Table : GLPCA and i am only able to use Table : GLPCT in Report Painter.
Please guide me how to solve my problem using Report Painter Report?
Regards,
Zain BashirDear Mani,
Thanks for your reply.
I also need to incorporate various fields along with quantities on Profit Center Report therefore i needed any solution which could help me get both type of quantities on Report Painter Tool.
Regards,
Zain Bashir -
GLPCT has entries from MM, SD & other origin objects but not in GLPCA
Hello,
We have a situation as below: amounts are not actuals to simpliy problem:
GL account involved is ABC which is a Retained earnings account.
FBL3N displays 100
GLPCA displays 100 with origin object as 35 - entries from FI
But GLPCT displays 160.
Reason is that in GLPCT there are lines with many more origin objects. There exists a line with origin object 35 which is exactly displaying the figure of 100.
But there are additional lines with origin ojects like :
1 Profit center
2 Cost center
4 Production order
5 Billing document
7 WBS Element
9 Network activity
45 Reconcilation object
Of these I could understand that if suppose we have a direct entry in PCA then in GLPCA & GLPCT we have lines with origin object 1. But currently we dont have any line in GLPCA with origin object 1.
Also a major question is how other origin objects are updated in GLPCT without reference in GLPCA & no link in GL line items BSEG.
The problem is that users want to run report S_ALR87013340 & are comparing with total of FBL3N. But the report shows the total of all the origin objects in GLPCT & hence the balance is never balancing with FBL3N.
Note - No archiving has been carried out.
Please help in understanding the GLPCT updates.
Thanks & Regards
ShreenathHello Eli,
Thanks for the prompt response. I have read the note. It doesnt explain however from where these various origin objects are getting updated in GLPCT.
The problem is not that the total for origin object 35 is different. It is exactly matching in GLPCT, GLPCA & GL line items.
But how to understand & trace what are the entries which are updating different origin objects in GLPCT directly.
Please help.
Thanks & Regards
Shreenath -
How to delete some data from GLPCA table
Dear Friends,
We have extracted some data in GLPCA table via the ECPA component. We
want to delete these records ( Doc type and Posting date is known).
However we do not want other data already existing the GLPCA to be
deleted. Is there some Std SAP Trx for deletion of partial/select data
from EIS tables.
Please explain us clearaly how we can delete these records.
Your quick reply for this issue is highly appreciated.
Thanks & Regards,
Naveen Kumar.Hello,
Please check the use of the report ZDELETE_PCA_DATA_BUKRS (mentioned in the SAP note 1174360), to delete totals from GLPCT.
I am not sure of any deletion reports for GLPCA table.
If you open the Source code of this program, you can see the following information :
"This report provides a possibility to delete actual and plan
*& postings on company code level as an alternative for transaction
*& 0KE1."
I do not have much information on this report as, personally I haven't used this anytime. Please run in 'Test Run' mode first and look for the results.
I hope this helps.
Thanks and regards,
Suresh Jayanthi. -
Profit center data in GLPCA and GLPCT Tables
Hi ,
We are in ECC 6 but with classic GL and profit center accounting.
We have the documents posted with profit center as the assignment object. When i check the documents through document display i could see the profit center in it , but when i execute the transactions 5KEZ , 2KEE i couldnt fetch any data. Actually there is no data updated to the GLPCA and GLPCT Tables.
These accounts are Frieght clearing , benefits clearing etc...
My actual requirement is the ending balances of GL accounts by profit center subtotals/ GL Trial balance by profit center .
Thank you.Hi
If these are balance sheet accounts, you need to run period end transactions like 1KE* to transfer the balances to EC-PCA
also, Tick the "Online Transfer" in EC-PCA config & Specify these accounts in 3KEH and then post a transaction.... It should get transferred online on real time basis
Br, Ajay M -
Profit center line items KE5Z - order missing - GLPCA-AUFNR
Hi folks,
could anybody give me an advice how to arrange that the order will be displayed in the KE5Z report?
Field GLPCA-AUFNR
Thanks a lot.
Regards
Edited by: Peter Jankech on Jun 4, 2008 1:41 PMSorry for unclear set question.
I know how to edit a layout.
The problem is, that the field GLPCA-AUFNR is initial, therefore in KE5Z-Profit center line items the field order is empty.
Is there any customizing setting or SAP-Note, which ensures that the field GLPCA-AUFNR is filled?
Thanks -
GLPCA table not getting updated correctly for VBUND
Hi All,
I have come across one issue that the value of trading partner field (VBUND) in table GLPCA are not getting updated correctly for document type KP.
In vendor master this field has different value versus it is showing in GLPCA-VBUND.
Does any one knows about ?
Thanks for your help on it.
Regards,
ManojHi Sridhar,
Thanks for your response on it.
This note is not applicable for our system as we are working on 4.0B with support pack 52.
Also we are getting this worng update of this field (GLPCA-VBUND) while doing MR11 creating document with doc. type KP. This value is not picking from vendor master (LAF1-VBUND) and randamly picking any value. Not sure from where ?
Please advise your thought.
Thanks,
Manoj -
Link GLPCA Ref doc to BSEG (ABAP Table Logic)
Hi, We are trying to link GLPCA to BSEG via the Reference Doc No in GLPCA. This is to get the reference field in BSEG.
All seems to work well for finance documents, but when we work with GLPCA Sales Doc Types RV the REFDOC Line has the line of the sales doc and not the BSEG Finance Doc. (our Sales Doc # is the same as the invoice). So now the only way we can think of to link GLPCA to BSEG is to go to BSEG by Ref Doc No. and loop through all of the BSEG entries for the document and compare the value to get the correct BSEG line.
Can anyone think of a better way to get the BSEG Line from GLPCA when working with Sales Docs?
Thanks for any help or comments..HI
1 ) Billing Document Number (VBRK u2013 VBELN)
2 ) Accounting document Number (BKPF u2013 BELNR)
VBRK u2013 VBELN AND BKPF u2013 XBLNR BOTH ARE SAME
Rgds
SumaMani -
Differece bet GLPCA and GLPCT in ECC 6 with classic PCA
Hi Ajay and Experts,
Thank you for helping me till now for all the issues in COPC and COPA we are all set.
I found once issue in PCA today as below, can anyone please give inputs.
I have reviewed all the threads but i want to specify my case first.
We are in ECC 6.0 with Classic PCA.
We are using Sales order substituion to get the PCA based on Region.
User dowsnot want to use transactions iKEK etc., for Balance transfers.
We crated on e kind of dummy PCA and assigned in 3KEH so all the balance sheet accounts posting with same.
we are trying get balances from GLPCT.
I observed the line items are getting updated in GLPCA but not in GLPCT, so our report get failed.
Can you please help me as early as possible.
Thanks,
SudhaHi,
My problem is resolved.
Actually the values in GLPCA and GLPCT are getting updated as expected.
The problem is with my custom report, i have identified and working with my technical team.
Thanks,
sudha -
How to relate vbrp & glpca to get line items for both ?
Hi
I am working on some report ,where I am passing vbrp-vbeln to glpca-refdocnr to get some field from glpca tables.
Now I have to work on item data as well.
vbrp-posnr to glpca-refdocln to get he corresponding line items..but when I put a join condtion on vbeln & refdocnr..it gives me duplicates as well.
below is my query & output ..Please advice how to eliminate duplicate records ???hi,
Ok. If we are getting 4 records here then the some where in the previous JOIN statements the records are being duplicated.
If possible try to use join condition on the VBAK table, which is header table in the select statement if that is not possible,
please try with the using DISTINCT key word in the select query.
Let us know the issues.
thanks,
Bhaskar -
GLPCA In profit center local currency is 0
Hello,
I have a question regarding the table GLPCA.
GLPCA provides data in my solution, but I don't know this table, that's why i'm here....
For the same selection criteria, I have the same amount (not zero) in Transaction Currency and in Company Code Currency but I have 0 in Profit Center Local Currency.
I would like to know if it is normal or not, and an explain.
Thanks to help me.
FannyHello,
I have no access to this transaction, I don't work in R3.
What kinf of information I should have find?
Regards
Edited by: Fanny A on Jul 2, 2010 1:40 PM -
hi gurus,
i need to find a relation between profit center and G/L account to do same reporting on charges by profit centers.
in table GLPCA i have the fields i need, but i have a question: are all the charges traced in this table (GLPCA) ? in other words are all the vendors invoices present in this table.
Thank you.Only for those entries in which profit center is assigned.
Eg :Say expenses or revenue for which profit center is assigned directly. only the expenses line item(i.e Dr) or revenue line item (i.e CR) alone will be there in GLPCA.
But in BSEG you can find both the entries(Dr & Cr) for the same doc, which you cant find in GLPCA.
Hope you understood.
else revert
Reg
Sujai -
Dear All,
Is there any other table where i can get the cost of each cost element a part form GLPCA table.
As it is taking too much of the time to fetch the data form GLPCA table.
Thanks
NSKDear Shashi,
Try FM PCA_ACTUALS_DETAIL
or PCA_ACTUAL_DOCUMENT_SHOW
PCA_SEND_LINES_GLPCA
Regards,
Amit
Edited by: Amit Iyer on Apr 3, 2009 11:39 AM
Maybe you are looking for
-
Pics don;t open in the Edit window when double clicked
Hi Need some help please. I had some problems with iPhoto and after trying to rebuild it etc etc etc, decided to reinstall everything. I backed up the entire library to a DVD, deleted the current library and then created a new one. Placed DVD in driv
-
Bus. area, Segment fields in MM accounting documents
Hi all of you, We have balancing fields Business area, PCtr and Segment. In every accounting document we have to fill the balancing fields. It is working fine in FI postings. When coming to MM postings, like in P.O -> GR -> IR there is no possible to
-
Anybody have any news from Nokia about the long awaited fix for the N80 bluetooth problems?
-
BPM not staring and meesages goes to queues
Hi everyone I have configured multiple inbound queues for a BPM. The BPM can execute multiple transactions, all of them are from a FIle adapter excepting 1 of them. That one is coming from a proxy on an R/3 system. But now, when the message arrives
-
Activity monitor functionality, suspending tasks
Obviously, any process can be killed using Activity Monitor by pressing the big red icon in the upper left... but what about suspending a process? On the command line, it's CTRL-Z. I really wish there was a "pause" button in Activity Monitor. Am I mi