RCPIC-CALL: 'ThSAPCMINIT' : cmRc=20 thRc=497
Dear All,
We have migrated our old system to a newer box, but after we have migrate we are getting below error in rfc error log.
Trace file opened at 20091215 145641 MYT, REL 46D,0,2458, VER 3
======> CPIC-CALL: 'ThSAPCMINIT' : cmRc=20 thRc=497
Unable to determine host address: NiHostToAddr failed
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 2105
CPIC-CALL: 'ThSAPCMINIT' : cmRc=20 thRc=497
Unable to determine host address: NiHostToAddr failed
HOST =kulapp01p
SERV =sapdp01
======> CPIC-CALL: 'ThSAPCMINIT' : cmRc=20 thRc=497
Unable to determine host address: NiHostToAddr failed
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 2105
CPIC-CALL: 'ThSAPCMINIT' : cmRc=20 thRc=497
Unable to determine host address: NiHostToAddr failed
HOST =kulapp02p
SERV =sapdp02
Besides that we also getting the same error in sm21, below message:
15:46:47 RD DDIC Q09 Host name kulapp01p not known
Can anyone help to solve this? Thanks in Advance.
Hi,
If you have entered hostname in the RFC connection, the corresponding IP address is picked up from the hosts file.
Either enter the host file entry or give IP address directly in RFC connection.
Cheers....,
Raghu
Similar Messages
-
Hi,
We update the BW landscape for version 7.4 suppport package 4 (whitout HANA).
We use a external system connection to extract data from a SQLServer database (Microsoft Connector 1.1 for SAP/BW)
In the previous version (BW 7.0.1 SP 10) run correctly, but now is in error.
Below the BW error log:
Error: COMMUNICATION_FAILURE with function RSB_API_OHS_3RDPARTY_NOTIFY and target system SQLIS.
Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679 Transaction program not regist).
Error log of Integrations Services
[SAP BI Destination 1 [476]] Error: Microsoft.SqlServer.Dts.SapBw.Connectivity.ERPException: An error occurred during the dispatch of the incoming function. The last return code was "RFC_FAILURE".
em Microsoft.SqlServer.Dts.SapBw.Components.SapBwSourceBWLoader.ProcessInput(Int32 inputID, PipelineBuffer buffer)
em Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper100 wrapper, Int32 inputID, IDTSBuffer100 pDTSBuffer, IntPtr bufferWirePacket)
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "SAP BI Destination 1" (476) failed with error code 0x80131500 while processing input "SAP BI Destination Input" (491). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
I checked the topic and notes below, but without success
CPIC Return Code 679 - Transaction Program not Registered - ABAP Connectivity - SCN Wiki
Note 1480644 - gw/acl_mode versus gw/reg_no_conn_info.
Note 353597 - Registering RFC server programs
Regards,
BrunoHi Bruno,
We were able to resolve the issue. SAP RDS is assisting us with our upgrade and one of their consultants gave us this fix/workaround.
Edit and add an entry into P:\usr\sap\<SID>\DVEBMGS00\data\reginfo.dat on your BW host server.
Below is the entry I added.
P TP=<NAME OF PROGRAM ID> HOST=<remote hostname where you creating the RFC to> CANCEL=<remote hostname> ACCESS=*
P TP=CTSAPNPSCI_PORTAL_FPS HOST=ctsapnpsci CANCEL=ctsapnpsci ACCESS=*
Then in BW system goto smgw > goto > Expert Funtions > External Security > ReRead ACL (N) & Globally
I hope that this works for you.
Regards
James -
CPIC-CALL: 'ThSAPCMRCV' : cmRc=17 thRc=244
Hi All,
I am getting the below short dump for Remote function call. I do not know the target system.
I would like to know the process through which I can know the target system from the dump.
I only have the short dump with me and want to know the possible reason for the short dump.
Runtime Errors CALL_FUNCTION_REMOTE_ERROR
Short text
"CPIC-CALL: 'ThSAPCMRCV' : cmRc=17 thRc=244#Partner heeft de verbinding
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_WFD_HCM_ADA================CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The error occurred during an RFC call to another system.
In the target system, a short dump has been written as well.
More detailed information on the error cause can be found there.
Error analysis
An error occurred when executing a REMOTE FUNCTION CALL.
It was logged under the name " "
on the called page.
Edited by: SAPsuchi on Apr 8, 2010 4:39 PMDear sir/madam,
I would like to know if you have solved this issue because I've the same problem.
Kind regards,
Jelmer Oenema -
There is a RFC connection not working connection test fails.
I found out the RFC is using a a program id that is not registerd.
When I register the program on os level like rfcexec -r -a <program_id> -g <hostname> -x <sapgw> the connection test on the rfc works.
The problem with the rfcexec is that it just works as long as the os session is active.
From what I´ve read I need to configure this on java side in the web dynpro content administrator.
Can you help me with that ? When I try to click Create jco destination I get an error.Hello Vioar,
rfcexec is only a standard program for testing, you sould not register it for your application on the gateway.
Since you are getting "User is not allowed to read any data..." - did you logon with the correct user? Does this user have enough authorizations?
Regards,
Alwina -
Dear Expert,
Please your advice about the problem PI connection RFC, ECC to PI
first I trying add the parameter RZ10 PI:
gw/sec_info = 0
gw/reg_no_conn_info =1 ( for gw SLD_UC, worked) if im not give parameter RFC SLD_UC error.
gw/acl_mode =1
This RFC name SAPSLDAPI,
type RFC H.
I check SLD not have problem.
Please your advice master..
Regards
~RuhulHi Ruhul,
Please follow the below link and see if it helps:
http://help.sap.com/saphelp_nw70/helpdata/en/78/20244134a56532e10000000a1550b0/content
Regards,
Sriram -
Timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 th Rc=456
hi,
i have just install SAP solution manager(windows2003 64bit+maxdb) and kernel is221. when i execute the t-code DB13 is got this error...
pls help to solve it.Hi Madan,
I Hope upgrading your kernel will do it.
I did not get exactly for your kernel level , but similar error was there in older kernel level.
Note 1027826 - SAPDBMRFC terminates
Regards, -
Hi,
We are trying to send idoc from r3 to Xi but in sm58 (r3 side) the error keeps hanging with following error :
CPIC-CALL: 'ThSAPCMINIT' : cmRc=20 thRc=665#Service inconnu
665 -> Gateway service unknown.
The FM involved is IDOC_INBOUND_ASYNCHRONOUS
Where is system checking for the service?
Best regards,
LaurentHi,
if you are configuring it to XI side try this blog,
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
else
- You need to get Basis to register your program on the destination system.
- Give the program Id in your communication channel then save and activate ur channel. Now test ur connection in SM59.
- use this blog /people/shabarish.vijayakumar/blog/2008/01/08/troubleshooting--rfc-and-soap-scenarios-updated-on-20042009
Regards
Aashish Sinha
PS : reward points if helpful -
RFC Connection error between R/3 4.7 & ECC 6.0
Hi all,
I m receiving the following error when i test the RFC connection between the mentioned systems..
/ CPIC-CALL: 'ThSAPCMINIT' : cmRc=20 thRc=665#Unknown service
DEV_W0 file contains the following information:
M *****************************************************************************
M *
M * LOCATION SAP-Gateway on host IGATESAP06 / sapgw00
M * ERROR service 'sapgw01' unknown
M *
M * TIME Wed Apr 22 03:59:51 2009
M * RELEASE 640
M * COMPONENT NI (network interface)
M * VERSION 37
M * RC -3
M * MODULE ninti.c
M * LINE 463
M * DETAIL NiPGetServByName: service 'sapgw01' not found
M * SYSTEM CALL getservbyname
M * COUNTER 2704
M *
M *****************************************************************************
M
A RFC 2272 CONVID 90657609
A * CMRC=20 DATA=0 STATUS=0 SAPRC=665 ThSAPCMINIT
A RFC> ABAP Programm: RSRFCPIN (Transaction: SM59)
A RFC> User: 704817 (Client: 800)
A RFC> Destination: ISMCLNT500 (handle: 2, , {8E460E4B-7D68-4FAE-A9BD-E212DAFA6A8E})
A RFC> Called function module: RFC_PING
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
Could any one pls. help me..
Thanks & Regards, SubbuHi all,
Thanks for ur replies.. I have added as u mentioned but i m receiving the below error??? Could u pls. suggest??
M *
M * LOCATION SAP-Gateway on host IGATESAP06 / sapgw00
M * ERROR service '?' unknown
M *
M * TIME Wed Apr 22 04:58:46 2009
M * RELEASE 640
M * COMPONENT NI (network interface)
M * VERSION 37
M * RC -3
M * COUNTER 2733
M *
M *****************************************************************************
M
A RFC 2272 CONVID 94231859
A * CMRC=20 DATA=0 STATUS=0 SAPRC=665 ThSAPCMINIT
A RFC> ABAP Programm: RSRFCPIN (Transaction: SM59)
A RFC> User: 704817 (Client: 800)
A RFC> Destination: ISMCLNT500 (handle: 2, , {34E2D1F9-B021-4B04-BD35-16E04AF4BD11})
A RFC> Called function module: RFC_PING
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
thanks,
Subbu -
RFC connection results in "Timeout during connection setup"
Hello Guys,
The RFC ABAP connection to the Solution Manager encounters connection error: "/ CPIC-CALL: 'ThSAPCMINIT' : cmRc=27 thRc=242#Timeout during connection setup."
The Solution Manager has following details:
SAP Solution Manager (700 15)
ORACLE 10.2.0.2.0
HP-UX
The R/3 QAS Customer 1 system has following details:
SAP R/3 Enterprise (620 54)
ORACLE 9.2.0.8.0
HP-UX
The R/3 QAS Customer 2 system has following details:
SAP R/3 Enterprise (620 59)
ORACLE 9.2.0.8.0
HP-UX
The RFC ABAP connection from <SID Solution Manager> -> <SID R/3 QAS Customer 1> is working correctly.
The RFC ABAP connection from <SID R/3 QAS Customer 2> -> <SID Solution Manager> is working correctly.
The RFC ABAP connection from <SID R/3 QAS Customer 1> -> <SID Solution Manager> encounters connection error:
ERROR timeout during allocate
LOCATION SAP-Gateway on host hemisrq.services.retail.tc.services.retail.tc / sapgw01
DETAIL no connect of TP sapdp02 from host conssmp.servom host <host name Solution Manager> after 22
COMPONENT SAP-Gateway
COUNTER 1152
MODULE gwr3cpic.c
LINE 1820
RETURN CODE 242
SUBRC 0
RELEASE 640
TIME Thu Jun 5 10:55:15 2008
VERSION 2
Here's the dev_rfc0 log file
Trace file opened at 20080605 101956 METDST SAP-REL 640,0,235 RFC-VER 3 985555
======> CPIC-CALL: 'ThSAPCMINIT' : cmRc=27 thRc=242
Timeout during connection setup. Please check partner availability
ABAP Programm: RSRFCPIN (Transaction: SM59)
Called function module: RFC_PING
User: SAPBEHEER (Client: 000)
Destination: <SID Solution Manager>CLNT010 (handle: 2, , {4846C6DC-14A2-0F1F-E100-0000AC1B29D8})
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 2277
CPIC-CALL: 'ThSAPCMINIT' : cmRc=27 thRc=242
Timeout during connection setup. Please check partner availability
HOST =<host name Solution Manager>
SERV =sapdp02
Checked the error code 242 "GW_TIMEOUT" and found:
Connection setup to the remote gateway has been closed because timeout has been exceeded.
The time limit can be set in parameter gw/timeout.
Changed parameter gw/timeout to value 10000, but still encounter same error message.
From OS level <SID R/3 QAS Customer 1> i can ping the <host name Solution Manager>.
fvb1:/home/stampg$>ping <host name Solution Manager>
PING <host name Solution Manager>: 64 byte packets
64 bytes from 172.27.68.239: icmp_seq=0. time=1. ms
64 bytes from 172.27.68.239: icmp_seq=1. time=1. ms
64 bytes from 172.27.68.239: icmp_seq=2. time=1. ms
64 bytes from 172.27.68.239: icmp_seq=3. time=1. ms
64 bytes from 172.27.68.239: icmp_seq=4. time=1. ms
64 bytes from 172.27.68.239: icmp_seq=5. time=1. ms
conssmp.services.retail.tc PING Statistics----
6 packets transmitted, 6 packets received, 0% packet loss
round-trip (ms) min/avg/max = 1/1/1
Any suggestions where to look ?
Regards,
GidionHello Gidion,
can you please verify the hostnames/FQDN's? Because:
LOCATION SAP-Gateway on host hemisrq.services.retail.tc.services.retail.tc / sapgw01
host hemisrq.services.retail.tc.services.retail.tc
It seems to me that somewhere the domain is double used.
Additionally:
Sometime there is sapgw 01, sometime sapdp 02. Can you please check the correct service numbers / system numbers?
Regards
Holger -
Error during configuration of EWA report
Dear Experts,
I am configuring EWA for my Production system. I have maintained the system in SMSY and generated RFC destinations. The RFC check is in GREEN. I have activated the SDCCN in the satellite system. The satellite system is put in Solution. Everything looks correct. However, when i am running any task in SDCCN like "Refresh sessions", "Refresh Service definitions", it fails with the following error:
Refresh of service definitions started from destination SM_SOLCLNT001_BACK
error reading system ID on SM_SOLCLNT001_BACK
Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=20 thRc=497#Unable to dete
Error refreshing service definitions from destination SM_SOLCLNT001_BACK
Task rescheduled for 20111216101604 ( attempt 0001 )
The RFC is working properly. I recreated the RFC many times but the same error. The RFC check is successful. I have removed all the RFCs and created them again in SMSY but to no avail.
Please help.
Thanks in AdvanceHi,
Did you get chance to check the Remote Login of the RFC and authorizations of the user?
Go to SDCCN of Satellite System.
1. Check the status of Task Processor.
Menu "Goto->Settings->Task Processor"; Check Task Processor Status, make sure its active.
2. Check the Task-Specific Settings
In t-code SDCCN --> Menu "Goto->Settings->Task-Specific" . Check the following under "Session Data Collection".
"Data request->Settings ". Confirm the checkbox is checked for "Allow Approximate Data Collection".
"Maintenance->Settings".
"RFC Destinations->Settings" --> Make sure SOLMAN SID is maintained here along with SOLMAN Back RFC destination.
Also check this note 727998 - Complete Replacement of Service Definitions for SDCC/SDCCN -
Error: RFC of "Spda_conflict_check" failed during configuration roadmap
We are facing problem during implementation of EHP4 on IDES ERP 6.0/NW7.0 on oracle 10.2 during the configuration roadmap.
We are using the SAPEHPi with SP level 20.
The pahse PREP_EXTENSION/CONFLICT_CHECK terminates with the error
Error : RFC of "Spda_conflict_check" failed
key : RFC_ERROR_SYSTEM_FAILURE
MESSAGE: Time Limit Exceeded.
After checking the RFC trace we have made changes in the RFC
destination "SERVER_EXEC"(Starts Program 'RFCEXEC' on Application
Server) and made the necessary changes by giving the path to the
program "/usr/sap/IE1/SYS/exe/uc/NTAMD64/rfcsdk/bin/rfcexec" and
providing the hostname where EHP4 installation is going on and test
connection was ok.
Another RFC Destination "EPS_CLIENT" (Electronic Parcel Service: R/3 <-
> EPS Client Communication) is not able to connect. we have provided
the target host and doesnot made any changes to program entry
i,e "/bas/BIN/gen/dbg/hp/epc".RFC conncetion is getting failed.
What is this program does in system "/bas/BIN/gen/dbg/hp/epc".?
log file of dev_rfc1
Trace file opened at 20090706 134701 W. Europe Daylight Time, SAP-REL 700,0,144 RFC-VER U 3 957098 MT-SL
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=20 thRc=497
Unable to determine host address: NiHostToAddr failed
ABAP Programm: RSRFCPIN (Transaction: SM59)
User: RANGUPTA (Client: 800)
Destination: SERVER_EXEC (handle: 2, , )
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=20 thRc=497
Unable to determine host address: NiHostToAddr failed
DEST =SERVER_EXEC
HOST =iwdfim01
PROG =/usr/sap/T3A/SYS/exe/run/rfcsdk/bin/rfcexec
Trace file opened at 20090706 135428 W. Europe Daylight Time, SAP-REL 700,0,144 RFC-VER U 3 957098 MT-SL
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=19 thRc=497
Unable to determine host address: NiHostToAddr failed
ABAP Programm: RSRFCPIN (Transaction: SM59)
User: RANGUPTA (Client: 800)
Destination: EPS_CLIENT (handle: 2, , )
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=19 thRc=497
Unable to determine host address: NiHostToAddr failed
DEST =EPS_CLIENT
HOST =q4de3gsy207
PROG =/bas/BIN/gen/dbg/hp/epc
GWHOST =hs0305
GWSERV =sapgw95
Trace file opened at 20090707 104841 W. Europe Daylight Time, SAP-REL 700,0,144 RFC-VER U 3 957098 MT-SL
======> CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456
Timeout during connection setup (check that partner exists)
ABAP Programm: SAPLCRFC (Transaction: SM59)
Called function module: RFC_PING
User: RANGUPTA (Client: 001)
Destination: EPS_CLIENT (handle: 3, 58623496, {EAD26ADE-05F0-F12A-89D5-005056955BE2})
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 3295
CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456
Timeout during connection setup (check that partner exists)
Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1817
Trace file opened at 20090707 105909 W. Europe Daylight Time, SAP-REL 700,0,144 RFC-VER U 3 957098 MT-SL
======> CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456
Timeout during connection setup (check that partner exists)
ABAP Programm: RSRFCPIN (Transaction: SM59)
Called function module: RFC_PING
User: RANGUPTA (Client: 001)
Destination: EPS_CLIENT (handle: 2, 59247771, {5DD46ADE-47D5-F1FE-89D5-005056955BE2})
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 3295
CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456
Timeout during connection setup (check that partner exists)
Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1817
Trace file opened at 20090707 110453 W. Europe Daylight Time, SAP-REL 700,0,144 RFC-VER U 3 957098 MT-SL
======> CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456
Timeout during connection setup (check that partner exists)
ABAP Programm: RSRFCPIN (Transaction: SM59)
Called function module: RFC_PING
User: RANGUPTA (Client: 001)
Destination: EPS_CLIENT (handle: 2, 59602149, {2CD56ADE-0BA0-F100-89D5-005056955BE2})
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 3295
CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456
Timeout during connection setup (check that partner exists)
Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1817Hi,
No i am not running SAPEHPI from remote host. it is a local installation. ERP6.0(IE1) is an IDES system with EHP3.
During the Conflict_check phase installer programme accesses RFC Destination "SERVER_EXEC" and "EPS_CLIENT".
SERVER_EXEC had some wierd entry.
Destination: SERVER_EXEC (handle: 2, , )
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=20 thRc=497
Unable to determine host address: NiHostToAddr failed
DEST =SERVER_EXEC
HOST =iwdfim01
PROG =/usr/sap/T3A/SYS/exe/run/rfcsdk/bin/rfcexec
SERVER_EXEC had different path of the program rfcexec "PROG =/usr/sap/T3A/SYS/exe/run/rfcsdk/bin/rfcexec" and i changed it to "/usr/sap/IE1/SYS/exe/uc/NTAMD64/rfcsdk/bin/rfcexec". after this RFC was working fine but the conflict _check again failed with the same error.
This time RFC EPS_CLIENT had errors:
Destination: EPS_CLIENT (handle: 2, , )
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=19 thRc=497
Unable to determine host address: NiHostToAddr failed
DEST =EPS_CLIENT
HOST =q4de3gsy207
PROG =/bas/BIN/gen/dbg/hp/epc
GWHOST =hs0305
GWSERV =sapgw95
so i changed the GWHOST to q4de3gsy207 and GWSERVER: sapgw00.
what this program does =/bas/BIN/gen/dbg/hp/epc
the test connection fails
but the problem persists.
i dont know from where it is accessing the hostname :iwdfim01
Edited by: Ranjeet Gupta on Jul 7, 2009 5:21 PM -
TMS error configuration - TMS_CFG_CREATE_A2D_REQUEST
Hello,
I´m with an error during the configuration of TMS of a new system QAS (Quality system) to the transport domain. When I went to txcode STMS, it show me the screen of TMS configuration where I filled the fields of Domain Controller, which is the DEV system! But it show me the following error:
Command: TMS_MGR_CONFIGURE_CLIENT
Service: Communication Interface
Start: Online
Function: TMS_CFG_CREATE_A2D_REQUEST
Message: RFC_COMMUNICATION_FAILURE
Description:
RFC communications error with system/destination DOM_CTL
Error when opening an RFC connection (CPIC-CALL:
'ThSAPOCMINIT' : cmRc=20 thRc=497#Unable to determi
I show you a print screen of this error in the following link:
http://img52.imageshack.us/img52/1195/tmserror.jpg
The platform of this system is an IBM iSeries.
This maybe is related with permissions or something... no?
Can you help me please?
Best regards,
JDimasHello,
I got reply from both servers when I ping from IP address but when but when I did this ping with hostname, they doesn't respond! (perhaps because it is not mapped in the .hosts file? ... am I right?)
But now... an important thing/information! Both machines are iSeries platforms... (this is the first time that I have to make a TMS configuration between two iSeries machines/systems). But, as I read in installation guide, there are a procedure to do this type of configuration - Setting Up the Transport Directory chapter, which is linked to SAP Note 117465.
But as I mentioned above, I don´t have any experience in this type of TMS configuration on iSeries servers, so can you guys guide me and let me know some critical information in way to do this configuration?
Kind regards,
JDimas -
Runtime Error: CALL_FUNCTION_OPEN_ERROR
Hi all,
we are facing a short dump while executing an RFC Function Module:
Please note the trace file for the short dump:
Error analysis
An error occurred when executing a Remote Function Call.
"CPIC-CALL: 'ThSAPOCMINIT' : cmRc=20 thRc=497#Unable to determine host add
NiHostToAddr failed "
Status of connection.... "CODE=CM_PRODUCT_SPECIFIC_ERROR -1 -1 SAPCODE=497
CONV= "
Internal error code.... "RFC_IO5"
There is an error in the communication system. To clarify
and resolve the error, contact your system administrator.
Last error logged in SAP kernel
Component............ "NI (network interface)"
Place................ "SAP-Gateway on host GOLITSAPD17 / sapgw01"
Version.............. 38
Error code........... "-2"
Error text........... "hostname 'golitsapd09.go-d01.local' unknown"
Description.......... "NiHsLGetNodeAddr: hostname cached as unknown"
System call.......... " "
Module............... "nixxhsl.cpp"
Line................. 223
After doing the initial analysis of this short dump and also doing the Connection Test using the transaction code SM59, the following error log is generated:
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: hostname 'golitsapd09.go-d01.local' unknown
Error Details LOCATION: SAP-Gateway on host GOLITSAPD17 / sapgw01
Error Details DETAIL: NiHsLGetNodeAddr: hostname cached as unknown
Error Details COMPONENT: NI (network interface)
Error Details COUNTER: 2701
Error Details MODULE: nixxhsl.cpp
Error Details LINE: 223
Error Details RETURN CODE: -2
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Wed Mar 25 03:34:07 2009
Error Details VERSION: 38
Please give your valuable inputs in order to solve this problemCheck note 710920.
Also check this.
[Error: CALL_FUNCTION_OPEN_ERROR|https://forums.sdn.sap.com/click.jspa?searchID=24006645&messageID=6319578] -
Saprouter error rc=-92 (NIEROUT_CONN_REFUSED)
I installed saprouter
when I test SAPOSS in sm59, error occued below
CPIC-CALL: 'ThSAPCMINIT' : cmRc=17 thRc=236#SAP
dev_rout file is desplayed below
ERROR => NiBufIProcMsg: hdl 4 received rc=-92 (NIEROUT_CONN_REFUSED) from peer [nibuf.cpp 2125]
I aleady checked host file and service file.
Ping sapserv2 is alright.
so How do fix this proplem ?
please ~~thanks all
I wonder why did not connect SAPOSS.
current system is made up by system copy.
I copy service file, hostfile and saprouttab from old system to new system
I use same hostname and IP in old system
when I execute OSS1 and then click Log on SAPNET, dialog box pop up.
I think that is connecting SAPNet but in SM59, SAPOSS test is failed
Error occur : saprouter error rc=-92 (NIEROUT_CONN_REFUSED)
how can I do?? -
Error while calling RFC adapter(FILE-XI-RFC scenario)
Hi,
I am trying for FILE-XI-RFC scenario. I am getting the following error. I have checked in message monitoring. The error is coming while calling the RFC adapter. Can any body tell what problem is this?
Regards,
Dhana
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.f23.sofd00001530a</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>2: Unable to find URL for Adapter Engine af.u7a.us4296</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading access data (URL, user, password) for the Adapter Engine af.f23.sofd00001530a</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>Hi,
I did SLD check.
The status says 'Summary: Connection to SLD works correctly'.
But it fails while checking the access to XI profile.
Here is the status
Summary: Connection to SLD works correctly
Now checking access to the XI Profile
Properties of RFC destination LCRSAPRFC
RFC host:
%%RFCSERVER%%
program id: LCRSAPRFC_DZ1
gateway host:
gateway service:
Testing the RFC connection to the SLD java client...
RFC ping returned exception with message:
/ CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679#Transaction program not registere
Maybe you are looking for
-
I suddenly have one bookmark missing...only one! which just so happens to be the one containing all the research I am currently working on. And it contains months and months of compiled data, websites, etc...WHICH IS needed to finish my project. was
-
Hi There is a requirement where in we are updating the price in the POs which are already created with the modified prices from Info records through a program. The problem is we are not able to get the print out of POs once they are updated with th
-
I'm running an iBook G4. On occasion, a black and white display appears (in multiple languages) and requires restarting by holding the power button.
-
How to use TCP socket in device driver
I want to use network with TCP in device driver in kernel mode. I am using Solaris 8 x86. How can I do it? help! Are there any examples? How does the SUN RPC achieve this goal? Can you do some explain for me?
-
How to call unix script/command in ODI
Hello Gurus, Please let me know how to call unix script/command in ODI? Thanks Shridhar