RCU installation - where to set components tablespaces?

Dear,
For the RCU installation in 11.1.1.6 for those about a hundred tablespaces is there a config file where you can specify which directory structure you will install all those about a 100 tablespaces BEFORE you run the installation process?
Thank you
Anatoliy

Please refer -
http://docs.oracle.com/cd/E23943_01/doc.1111/e14259/toc.htm
Regards,
Anuj

Similar Messages

  • Where to set timezone bettween EBS 12 installation

    when I finished EBS 12 installation,
    I detect the time zone is not suitable, that is the database time zone(select dbtimezone from dual) is different from local timezone (select systimestamp from dual).
    for EBS12 installation, I did NOT find where to identify the timezone. Can you tell me where to set timezone , thanks!

    Please see (Globalization Guide for Oracle Applications Release 12 [ID 393861.1]).
    Thanks,
    Hussein

  • Getting the error during RCU installation

    Hi,
    I am facing the below error during the installation of RCU.I has given the sys user and the pwd which is working fine from DOSPROMPT.the same when i give in the the configuration during the installation of RCU ,i am getting the below error .Can any one help me in sorting out this issue .
    Thanks in Advance..
    2012-10-02 22:52:58.645 NOTIFICATION rcu: oracle.sysman.assistants.common.dbutil.jdbc.JDBCEngine::connect: Connecting to database: user:sys, role:SYSDBA, connectString:(description=(address=(host=localhost)(protocol=tcp)(port=1521))(connect_data=(service_name=ORCL)(server=dedicated)))
    2012-10-02 22:52:58.730 ERROR rcu: oracle.sysman.assistants.rcu.backend.validation.StepValidator::isConnectionStepValidated: Failed to connect database: Invalid username/password.
    Please enter valid username/password
    2012-10-02 22:52:58.730 ERROR rcu: oracle.sysman.assistants.rcu.backend.validation.StepValidator::isConnectionStepValidated: SQLFatalErrorException:
    oracle.sysman.assistants.common.dbutil.SQLFatalErrorException: Invalid username/password.
    Please enter valid username/password
         at oracle.sysman.assistants.common.dbutil.jdbc.JDBCEngine.connect(JDBCEngine.java:585)
         at oracle.sysman.assistants.rcu.backend.validation.StepValidator.connectDatabase(StepValidator.java:358)
         at oracle.sysman.assistants.rcu.backend.validation.StepValidator.connectDatabase(StepValidator.java:253)
         at oracle.sysman.assistants.rcu.backend.validation.StepValidator.isConnectionStepValidated(StepValidator.java:1352)
         at oracle.sysman.assistants.rcu.ui.pages.DBConnectionPage.updateModel(DBConnectionPage.java:552)
         at oracle.sysman.assistants.common.wizard.WizardPageExt.wizardValidatePage(WizardPageExt.java:166)
         at oracle.bali.ewt.wizard.WizardPage.processWizardValidateEvent(WizardPage.java:710)
         at oracle.bali.ewt.wizard.WizardPage.validatePage(WizardPage.java:680)
         at oracle.bali.ewt.wizard.BaseWizard.validateSelectedPage(BaseWizard.java:2367)
         at oracle.bali.ewt.wizard.BaseWizard._validatePage(BaseWizard.java:3072)
         at oracle.bali.ewt.wizard.BaseWizard.doNext(BaseWizard.java:2152)
         at oracle.bali.ewt.wizard.dWizard.DWizard.doNext(DWizard.java:405)
         at oracle.sysman.assistants.common.wizard.WizardExt.doNext(WizardExt.java:261)
         at oracle.bali.ewt.wizard.BaseWizard$Action$1.run(BaseWizard.java:3944)
         at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
         at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:641)
         at java.awt.EventQueue.access$000(EventQueue.java:84)
         at java.awt.EventQueue$1.run(EventQueue.java:602)
         at java.awt.EventQueue$1.run(EventQueue.java:600)
         at java.security.AccessController.doPrivileged(Native Method)
         at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:611)
         at oracle.sysman.assistants.common.util.EventPopUp.dispatchEvent(EventPopUp.java:94)
         at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
         at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)

    Thanks veeravalli for your reply,
    I tried manually created a user and provided the sysdba priveiledge to that user and gave that user name and pwd in the database connection steps of RCU installation and gave next .this time i dint get the invalid username /pwd error.But instead i got the below error.
    RCU-6002:The specified database does not meet the minimum requirement to load metadata repository.
    RCU-6080:Global prerequisite check failed - Check requirement for specified database
    The database you are connecting is with non-AL32UTF8 character set. Oracle strongly recommends using AL32UTF8 as the database character set.
    Can anyone suggest an idea to resolve this issue .

  • RCU Installation - Service Name of fresh DB installation

    Hi,
    I am setting up SOA suite 11g. I have Oracle 11.1.0.7 DB (fresh installation) and I my lsnrctl is showing following information;
    $ lsnrctl status
    LSNRCTL for IBM/AIX RISC System/6000: Version 11.1.0.7.0 - Production on 08-SEP-2010 17:05:49
    Copyright (c) 1991, 2008, Oracle. All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for IBM/AIX RISC System/6000: Version 11.1.0.7.0 - Production
    Start Date 08-SEP-2010 15:42:00
    Uptime 0 days 1 hr. 23 min. 49 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP ON
    Listener Log File /home/oracle/Oracle11gR1/app/oracle/product/11.1.0/db_1/log/diag/tnslsnr/hml-bladep6a2/listener/alert/log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hml-bladep6a2)(PORT=1521)))
    The listener supports no services
    The command completed successfully
    I chose to create new repository and provided following information on RCU setup screen;
    Host Name: IP_Address of the machine
    Port: 1521
    Service Name: *<--- I dont know what to provide here as I didn't create any databases on server yet*
    Username: sys
    Password: ******
    Role: sysdba
    Am I missing anything....?

    Hi,
    I found the solution and some more useful information which I wanted to add here for future reference.
    To run RCU, we need to create a DB first in Oracle and then LSNRCTL will pick up that database and start listening on default port (1521). Use you DB name as Service name which can be verified as follows;
    LSNRCTL Status_
    $ lsnrctl status
    LSNRCTL for IBM/AIX RISC System/6000: Version 11.1.0.7.0 - Production on 14-SEP-2010 09:33:34
    Copyright (c) 1991, 2008, Oracle. All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for IBM/AIX RISC System/6000: Version 11.1.0.7.0 - Production
    Start Date 13-SEP-2010 16:12:15
    Uptime 0 days 17 hr. 21 min. 18 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP ON
    Listener Log File /home/oracle/Oracle11gR1/app/oracle/product/11.1.0/db_1/log/diag/tnslsnr/hml-bladep6a2/listener/alert/log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hml-bladep6a2)(PORT=1521)))
    Services Summary...
    Service "AIA" has 1 instance(s).
    Instance "AIA", status READY, has 1 handler(s) for this service...
    Service "AIA_XPT" has 1 instance(s).
    Instance "AIA", status READY, has 1 handler(s) for this service...
    The command completed successfully
    Also I found out during my RCU installation we need some more settings before and after creating DB to run RCU successfully;
    *1) DB_BLOCK_SIZE Settings*
    The default initDB_NAME.ora file create DB with *'db_block_size=4096'*, if that the case you'll see following error while installing RCU;
    RCU-6002:The specified database does not meet the minimum requirement to load metadata repository.
    RCU-6080:Global prerequisite check failed - Check requirement for specified database
    RCU-6107:DB Init Param Prerequisite failure for: DB_BLOCK_SIZE
    Current Value is 4 KB. It should be greater than or equal to 8 KB.
    User should have sysdba or dba privilages.
    It is irreversible :(. You have to drop and create DB again with following parameter in $ORACLE_HOME/dbs/initDB_NAME.ora file;
    db_block_size=8192
    *2) User Previlages*
    You can not use SYS/SYSDBA to connect to Oracle DB from RCU setup. To grant SYSDBA permissions to the ORACLE DB user first apply following command from shell;
    $ orapwd file=$ORACLE_HOME/dbs/orapw$ORACLE_SID password=PASSWORD entries=4 force=y
    Note: In above command the password is Unix/Windows login password not SYS password.
    Now, login into SQLPLUS prompt using sys/sysdba to finally grant SYSDBA opermission to normal Oracle DB User as follows and restart DB to apply changes;
    SQL> grant sysdba to aia;     <-- Grant SYSDBA permission to user 'aia' in this case
    Grant succeeded.
    SQL> grant dba to aia;
    Grant succeeded.
    SQL> startup force;
    ORA-32004: obsolete and/or deprecated parameter(s) specified
    ORACLE instance started.
    Total System Global Area 1286144000 bytes
    Fixed Size 2153376 bytes
    Variable Size 738198624 bytes
    Database Buffers 536870912 bytes
    Redo Buffers 8921088 bytes
    Database mounted.
    Database opened.
    Hope above information will help.
    SJunejo

  • I tried to update the software of my iphone 3gs while charging with my Macbook Pro. While the phone was restarting after installation, in the setting up my phone menu, it stops midway with a message in itunes on the laptop that there is no simcard.

    I tried to update the software of my iphone 3gs while charging with my Macbook Pro. While the phone was restarting after installation, in the setting up my phone menu, it stops midway with a message in itunes on the laptop that there is no simcard.

    Then put a SIM in. You cannot activate an iPhone without a compatible Sim.
    If your iPhone was hacked/jailbroken the update restore the lock.

  • WRT120N - Can't find where to set DNS I want it to use

    I bought WRT120N to replace a Netgear I had.  
    I cannot find in the management console where to set the DNS servers I want it to use.  
    Can somebody please give me the drill-down to find it.
    Solved!
    Go to Solution.

    I have no idea how I missed that.
    Well, yes I do.  The word STATIC threw me off.  I had just never seen the DNS entries described that way before, although it is technically correct.  I just think of static addresses as those you assign to your own devices on your own network.
    Anyway, thanks.

  • Where to set "module load option"

    I have been checking one teststand sequence file and I got a message to change the module load option to dynamic load module....but I simply couldn't find where to set it. please help me with any input. thanks a lot

    found it..

  • The scroll motion where I set the fill is only scrolling down

    The scroll motion where I set the fill is only scrolling down, even when I set it to go up. Has anyone else expereinced this? Can you help me correct this?

    Hi Crystal,
    Could you please explain in details what you have done so that I can test it out at my end? Is there a live page where I can check the issue? Can you create a trial site on BC and then show it to me so that I can investigate the issue further? Thanks.
    - Abhishek Maurya

  • Installation failed installation completed through some components failed to instal correctly

    Hello i've been really exited to donload photoshop and so i decided to try the free version i downloaded creative cloud and went into th eapps and click on photoshop try it free i waited a few 30 mins and it stopped and told me this
    installation failed installation completed through some components failed to instal correctly.
    and then i was like whatttt?!?!?!?!?
    so I decided to come here and ask why this is happening please answer ASAP I really need photoshop for important stuff!!!

    Try restarting your computer, then try again. Awhile back, some of the apps which I think included photoshop require the microsoft runtime to be updated. That runtime requires a restart to finish installing. But since it is a piggyback program, the error code telling you do so is hidden in the log file.
    If it still does not install let us know.

  • Where to set up DMEE default file name

    Dear all,
    I create a new DMEE format and I can download a file from FDTA.
    However, the default file name is "A:\ (DMEE format name)".
    Where to set up the default file?
    I want to make default file name like this  "C:\DDMMYY_BANKNAME.IMP" .
    Thanks for your help in advance.

    Hello Seung Dam,
    Below are the steps.
    OBPM4 > select the respect payment medium format > place the cursor on the u2018Sel. Variantu2019 input field > click Edit > Edit variant.
    Under Output Control section > activate the u2018Output to file systemu2019 and enter default file path in the u2018File nameu2019 input field.
    Please try the above mentioned and let me know if there is any question.
    Good luck!
    Kind regards,
    John Chin

  • Health set components seems to be unhealthy

    Hi,
    In my environment health sets components seems to be unhealthy but there is no problem with user side
    Below are the components
     HealthSet           AlertValue
     MailboxTransport    Unhealthy
     HubTransport        Unhealthy
     ECP                 Unhealthy
     Search              Unhealthy
     Store               Unhealthy
     MSExchangeCertif... Disabled
     DataProtection      Unhealthy
     RPS                 Unhealthy
     RWS                 Unhealthy
     Compliance          Unhealthy
     Outlook             Unhealthy
    Can somebody help me through this please.

    Hello,
    I think you can combine the heltht reports with the application log?
    Is there any warning or error reprot in it about these unhealty items. If no, I think we can safely ingore these errors.
    Thanks,
    Simon Wu
    TechNet Community Support

  • I wander where to set import job for transports

    I wander where to set import job for transports to be imported automatically. On transport domain controller I can not manage other job than the one for the system itself.
    On the system which is not transport domain controler I have only display function

    are you asking for 'automatic import' in QAS/PRD ?
    When you go to STMS import queue in a particular system like QAS, there you can see a button 'import all'. This will enable to you schedule automatic import periodically in intervals for eg. 15 min or whatever you want.
    just click on import all and it will ask for inputs and schedule
    OR, do you want to confirm for RDDIMPDP job ?
    Run report RDDNEWPP to schedule RDDIMPDP
    Edit: Note 11677 - Transports with event-controlled RDDIMPDP

  • Persistence Layer Analysis - where to set Maximum Number of tbale entries?

    Hi gurus,
    I need to increase this value. Can you please let me know where to set it up?
    Thank you. Olian

    Hi Olian,
    Open table SXMSPMAST in se11 and goto technical setting set the value Size Category to 6 or 7 from default value 4 according to ur req.
    Thanks!

  • Contact sheet: where to set size & can I print with another software?

    Using contact sheet for first time. nice! Blows away Photoshop just as the LR web galleries blow away all others.
    Question: I cannot find where to set the print size, I want to do 11x14
    Also can I save the file and print from Imageprint?
    The help page online talked about templates. I don't see them. Thank You.

    Thanks ... tried the Paper Handling, but no lock.
    Based on the fact that any scaling, "moves" the image down and to the left on the paper ...
    Th only "work around" solution is to ...
    Rotate the PDF page 180, then scale slightly (90% or so ...)
    This pushes the upside down page, down and to the left.
    While this is the opposite of what is desired, the print is then correct when
    it is punched and placed into a three ring binder.
    Assumption is the application that creates the documnt, needs to have the paper margins set. The reality is, an application like Preview, that does not "create anything", needs to handle existing documents PDF, JPEG and print to Custom Page configurations.
    ie: In Preview, Custom Page does not work correctly,
    Thanks allfor the comments and help ...

  • Where to set assign CO when calcalate depreciation (AFAB)

    now i have  CO (Cost center )in each assets .
    but when i run depreciation AFAB
    it's not calculate depreciation to CO
    where to set Cost center ?
    please help.

    Hi,
    try in t-code : ACSET.
    hope it can help.

Maybe you are looking for