RCV file adapter error:
hello all,
i am trying a simple jdbc to file scenario. the jdbc adapter picks up a record from the db table successfully, but the file is not posted.
1. in the adapter monitor, i see this msg:
Receiver Adapter v2307 for Party '', Service 'x1s':
Configured at 2006-06-21 08:25:17 PDT
No message processing until now
2. in the message monitoring the status is waiting for some messages and system error for few messages.( i tried resending them but there was a java null lang exception)
3. i tested my message mapping, interface mapping everything works fine.
4. i went to ID -- tools -- test configuration: it showed an error in my interface mapping as below:
Interface Mapping
I am not sure wht the problem is , can anybody advice.
Thanks
Hi Bhavesh,
the source xml with my select query is :
<?xml version="1.0" encoding="utf-8" ?>
- <ns:JHI_LOAD_DELTA_Request_MT xmlns:ns="urn:www.jameshardie.com/JDBCTOFile">
- <row>
<ID>DST000024628</ID>
<SCHED_NUM>BPLTL</SCHED_NUM>
</row>
</ns:JHI_LOAD_DELTA_Request_MT>
when i test in my interface mapping: it fails due to parser error,:
10:26:09 Start of test
Call method execute of the application Java mapping com.sap.xi.tf._JHI_LOAD_DELTA_to_File_
Error during appliction Java mapping com/sap/xi/tf/_JHI_LOAD_DELTA_to_File_
com.sap.aii.utilxi.misc.api.BaseRuntimeException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 2d, 20, 3c(:main:, row:2, col:3) at com.sap.aii.mappingtool.tf3.Transformer.checkParserException(Transformer.java:37) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:63) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105) at com.sap.aii.ibrep.server.mapping.ibrun.RepJavaMapping.execute(RepJavaMapping.java:73) at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingHandler.run(RepMappingHandler.java:80) at com.sap.aii.ibrep.server.mapping.rt.MappingHandlerAdapter.run(MappingHandlerAdapter.java:107) at com.sap.aii.ibrep.server.mapping.ServerMapService.transformInterfaceMapping(ServerMapService.java:127) at com.sap.aii.ibrep.server.mapping.ServerMapService.transform(ServerMapService.java:104) at com.sap.aii.ibrep.sbeans.mapping.MapServiceBean.transform(MapServiceBean.java:40) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0.transform(MapServiceRemoteObjectImpl0.java:131) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0p4_Skel.dispatch(MapServiceRemoteObjectImpl0p4_Skel.java:104) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:304) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:193) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:122) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Root Cause: com.sap.aii.utilxi.misc.api.BaseRuntimeException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 2d, 20, 3c(:main:, row:2, col:3) at com.sap.aii.mappingtool.tf3.rt.xparser.MTSaxHandler.run(MTSaxHandler.java:130) at com.sap.aii.mappingtool.tf3.rt.xparser.XParser.run(XParser.java:68) Root Cause: com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 2d, 20, 3c(:main:, row:2, col:3)(:main:, row=2, col=3) -> com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 2d, 20, 3c(:main:, row:2, col:3) at com.sap.engine.lib.xml.parser.XMLParser.scanProlog(XMLParser.java:2733) at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2778) at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:227) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:141) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:156) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:259) at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:276) at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:338) at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:125) at javax.xml.parsers.SAXParser.parse(SAXParser.java:345) at com.sap.aii.mappingtool.tf3.rt.xparser.MTSaxHandler.run(MTSaxHandler.java:128) at com.sap.aii.mappingtool.tf3.rt.xparser.XParser.run(XParser.java:68) -
at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:144) at javax.xml.parsers.SAXParser.parse(SAXParser.java:345) at com.sap.aii.mappingtool.tf3.rt.xparser.MTSaxHandler.run(MTSaxHandler.java:128) at com.sap.aii.mappingtool.tf3.rt.xparser.XParser.run(XParser.java:68) Caused by: com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 2d, 20, 3c(:main:, row:2, col:3) at com.sap.engine.lib.xml.parser.XMLParser.scanProlog(XMLParser.java:2733) at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2778) at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:227) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:141) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:156) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:259) at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:276) at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:338) at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:125) ... 3 more
10:26:09 End of test
from a previous forum discussion, i found out that the MONI payload is missing ns0 ( in namespace) so i went to jdbc adapter and changed the doument name and namespace with ns0, if i do that the adapter is not picking up the record at all
Similar Messages
-
File adapter error after updating to SP19 (INBOUND_BINDING_ERROR)
File adapter error after updating to SP19 (INBOUND_BINDING_ERROR)
Hi all,
im having some troubles after the installation of SP19 (from SP16 in NW04) with File Adapter (File->Idoc scenario).
In message monitoring (Adapter Engine), I have several messages with status "System Error". The error text is :
<i>Received XI System Error. ErrorCode: INBOUND_BINDING_ERROR
ErrorText: ErrorStack: Error in sender agreement for party '', service 'LEGACY_DEV', interface namespace 'http://XXXXX.com/XXXXXX', interface 'INTERFACE_OB' No sender agreement found for , , , , ,</i>
Im sure that the Integration Directory settings have not been changed. So I tried the following, but the problem persists:
- Deactivation/Activation of File Adapter channel
- check that user XIISUSER is not locked
- checked SXI_CACHE (it seems ok)
- Many CPA full refresh
- Dummy modifications of File Adapter channels (a dummy modification of the description)
- Reboot J2EE
I've seen that someone else had problems after upgrading to SP19. I'd really appreciate any suggestion of how to solve my issue.
Thank you
ManuelHi Prabhu,
I've already tried to restart server, but nothing happened. (Before update to SP19, the interface worked well).
This is the error log from message monitoring:
<i> 2007-01-16 16:37:34 Success Channel cc_File_Snd_Bolle: Entire file content converted to XML format
2007-01-16 16:37:34 Success Send binary file "BOLLE_20061229142059.CSV" from FTP server "AS810T:/sapinbound", size 8733 bytes with QoS EOIO
2007-01-16 16:37:34 Success Application attempting to send an XI message asynchronously using connection AFW.
2007-01-16 16:37:34 Success Trying to put the message into the send queue.
2007-01-16 16:37:35 Success Message successfully put into the queue.
2007-01-16 16:37:35 Success The application sent the message asynchronously using connection AFW. Returning to application.
2007-01-16 16:37:35 Success The message was successfully retrieved from the send queue.
2007-01-16 16:37:35 Success File "BOLLE_20061229142059.CSV" successfully archived on FTP server "AS810T" as "/sapinbound/bolle/20070116-163735-245_BOLLE_20061229142059.CSV"
2007-01-16 16:37:35 Success The message status set to DLNG.
<b>2007-01-16 16:37:35 Error Received XI System Error. ErrorCode: INBOUND_BINDING_ERROR ErrorText: ErrorStack: Error in sender agreement for party '', service 'LEGACY_DEV', interface namespace http://XXXXX.com/XXXXXX', interface 'INTERFACE_OB' No sender agreement found for , , , , ,
2007-01-16 16:37:35 Error Transmitting the message to endpoint http://SERVERNAME:8000/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: INBOUND_BINDING_ERROR:. </b>
2007-01-16 16:37:35 Success The asynchronous message was successfully scheduled to be delivered at Tue Jan 16 16:42:35 CET 2007.
2007-01-16 16:37:35 Success The message status set to WAIT.
2007-01-16 16:42:35 Success Retrying to send message. Retry: 1</i>
After this, the system try to resend the message, and the same error appears several times.
Ty,
Manuel -
Mail confirmation for RCV File Adapter
Hi All,
Rcv File adapter posts data in FTP server.After posted , we need an email confirmation to a group , that the data is successfully posted. How can we achieve this.As the FTP Server can not send any response, you can not get any indication whether it is success or failure. So tell your customer that if sending file to your customer fails then only you will send mail. Develop alerts so that when ever message fails then alert will goto responsible person.
thanks,
madhu. -
Hi all,
I am trying to convert the XML to Plain file in receiver file adapter. I am using module - StrictXml2PlainBean
My target structure is -
<MT_Name>
<records>
<Header>
</Header>
<Item>
</Item>
</records>
</MT_Name>
<Header> and <Item> are at same level.
When I use --
1. Header.fieldSeparator = ,
2. Item.fieldSeparator = ,
3. recordTypes = Header,Item
Then I get this error -
Message processing failed. Cause: com.sap.aii.af.app.modules.conversion.xml2plain.ConversionException: Invalid structure name encountered during conversion: records at XML element MT_Name,records
When I use --
1. records.fieldSeparator = ,
2. singleRecordType = records
Then I get this error -
Message processing failed. Cause: com.sap.aii.af.app.modules.conversion.xml2plain.ConversionException: The element nesting level for the structure MT_Name is too deep (reference: 3 levels, found: 4 levels) at XML element MT_Name,records,Header,Item
To add more details to the scenario, multiple records can be generated but one record will have only one Header, with multiple Items.
Any help in this regard will be highly appreciated.
Thanks,
AbhiHi Abhi,
Here you go....
For your target structure as:
<MT_Name>
<records>
<Header>
</Header>
<Item>
</Item>
</records>
</MT_Name>
Where I have assumed that <Header> and <Item> are at same level.
DO NOT use any Module just simply configure the receiver channel as below:
In the file Receiver Channel
Recordset Structure = Header,Item
Name Value
Header.fieldSeparator ,
Item.fieldSeparator ,
I have tried this and it works.
Let me know if you are facing any issues.
Cheers
Dhwani -
Receiver file adapter error for special char.
I am using MTB in my receiver file adapter. I am getting a special character from source system at end of the string. How to resolve this type of error u2013 please advice.
This error is not coming for every message.
Error message:
Column value xxxx  too long - must stop, probably configuration error in file adapter
Thanks
VickHi,
Itu2019s basically IDOC to file scenario.
This error is coming for name field.
What I am thinking at this stage to do changes in MTB by define parameters like (NameA.enclosureConversion) -
FTP connection error whil,e using flat file adapter error
while using file adapter in the reciever end for proxy to file
i am giving paranters like server IP address and the port , i dont know which port to give by default it is giving me 21 , anyway how to check whether the connection is correct
and more over
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: ConnectException: Connection timed out: connect
please help me in this thanksHI Sridhar ,
First check wether server started or not and then check you are connecting to FTP server by
go to run -> cmd and write ping and ipaddress which is used and see whether u r getting reponse from teh FTP server.
Try to login to the ftp server which you have mentioned in CC using the user name and pwd, to chk whether you have the permissions to login to the server.
Also the check whether the folder you are trying to access is having permission for delete/read/write.
Restart the FTP server and try it again.
Regards
Sridhar Goli -
Hi ,
While monitoring file adapter it is showing the error.
Processing Error: No suitable sender agreement found
In the integration directory i have defined Sender Agreement and also defined Sender communication channel.
The communication channel for file adapter is defined in the business sytems.
The file adapter is not picking the file from the file system.
Kindly suggest what could be the error
Thanks & Regards
MonzyThe sender agreement you have created may not be matching, you have to check your sender system/sender interface & sender namespace parameters again and see if your converted XML ouput by the adapter is matching these 3 parameters.
possible issue could be with ur sender namespace. are u reading XML file or CSV file. If CSV check the namespace definition in ur file content conversion config. it may not match the sender namespace definition in sender agreement. Hope it helps
-Saravana -
Flat file with fixed lengths to XI 3.0 using a Central File Adapter---Error
Hi
According to the following link
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
In Adapter Monitor I got the following error,
In sender Adapter,
Last message processing started 23:47:35 2008-10-25, Error: Conversion of complete file content to XML format failed around position 0 with java.lang.Exception: ERROR converting document line no. 1 according to structure 'Substr':java.lang.Exception: Consistency error: field(s) missing - specify 'lastFieldsOptional' parameter to allow this
last retry interval started 23:47:35 2008-10-25
length 15,000 secs
some one help me out ?
Thanks
Ramfrom the blog you referenced -
<u> /people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
<b>goto step 4</b>
<u>additional parameters</u>
add as the last entry
<recordset structure>.lastFieldsOptional Yes
e.g.,
Substr.lastFieldsOptional Yes -
Hi,
Iam getting the following error in sender file adapter:
Could not process due to error: com.sap.aii.adapter.file.ftp.FTPEx: 550 *** ERROR *** NO BATCHES FOR TRANSMISSION
Could anyone help me in this.
Thanks &Regards,
Y.RajHi Raj,
1. Check whether the user you are using has access control i.e Read/Write Access from the folder in FTP server..
2. Check it at OS level by directly pasting or pick the files..
3. From SAP end check the user credientials provided in the file adapter i.e username of the FTP server and the Password of the FTP server it is case-sensitive.
4. Try to give the exact path from where the file is to be picked and reactivate the scenario.
5. what is the file size of the file that is going to be picked from the ftp server.
6. Then finally check in Communication channel monitoring detailed log what is the error it was coming and check the log in XI server you can clearly notice the error.
Even some times it will access at OS level but not through the server for this reactivate the adapter and provdie the user credentials and the path once again..
regards,
Kishore. -
Sender File Adapter Error reading file
Hello!
I have a problem with reading a file using the FTP adapter.
I have configured everything according to the steps of weblog "FILE to JDBC Adapter using SAP XI 3.0" (/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30).
I know the sender FTP adapter can connect to the directory and file because:
1) it has complained about wrong format in the content conversion (has been fixed)
2) when there is no file for it there to pick up, the FTP flag in the adapter monitor is green
When I put a file in the specified directory I get the following error:
- 2006-06-21 09:52:23 CDT: Retry interval started. Length: 10.000 s
- 2006-06-21 09:52:23 CDT: Error: Retrieving file 'test_file.dat' failed unexpectedly: FTPEx: Public: The system cannot find the file specified.
- 2006-06-21 09:52:20 CDT: Processing started
- 2006-06-21 09:52:13 CDT: Error: Retrieving file 'test_file.dat' failed unexpectedly: FTPEx: Public: The system cannot find the file specified.
- 2006-06-21 09:52:10 CDT: Processing started
I also get the same error if I skip the content conversion and put a "ready" XML file there.
There should be no auth problems at all. Public server, and I can log on, get, put, delete etc. Also it can apparently read it since it can complain about the content format. Anyone seen this before?
Please advise. Thanks!
NamHi Nam,
Is your User Id and User Id/Password is correct ?
Is connection mode is per file transfer in File Adapter configuration?
Also you can see the log from Visual Admin..
Regards,
Moorthy -
File Adapter Error Handling from Batch job
Dear all,
I'd like to handle error information by batch job process.
However I can't find out the error flag from the file adapter.
My XI setting is below.
1.FIle to File conversinn by using File adapter
2.Async setting
3.Not use BPM
Anyway,we only want to judge the status for XI process from Batch process like MS-DOS batch.
Kindly please tell me the detail explanation.
Regards,
Masayuki.Hi Masayuki,
Please take a look at these..
http://help.sap.com/saphelp_nw2004s/helpdata/en/fa/09714d543b11d1898e0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/fa/0971c2543b11d1898e0000e8322d00/frameset.htm
cheers,
Prashanth -
File Adapter Error FTPEx:553
Hi
I have cnfigured a file adapter and tryng to FTP a XML file and I am getting this error.
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Could not create file.: com.sap.aii.adapter.file.ftp.FTPEx: 553 Could not create file. For Details, contact your FTP server vendor.
Please help.
Thanks
PavanIs the message is successfully processed in the SXMB_MONI ?
If Yes , U don't sufficient authorization to create the files in the FTP server.
If no, check your repository objects again whether you have configured correctly or not.
Thanks -
Hi All,
I am using File adapter to read the xml file and FTP it to another directory ( BPEL 10.1.3)
If i put any xml file in the input directory , it picks up the file and FTP it , but the as the xml file will not match the xsd, it out put some xml file which doesnt have any data. I
if the xml file not as per XSD then it should throw error or ?
If i put the correct xml file it FTP it to output directory with correct xml file.
My question is how do i handle the situation/error where xml file is not well formed or xml is not as per the xsd, so that it should stop the process and will log the error and put the file in some other directory.
Please help.
Thanks and Regards,
Vikram SinghHi,
Yes, i did checked in the folder.
Also did the following changes as per the Adapter dev guide, Now i am able to validate the file but its not writing the rejected file messgae to the specified director.
bpel.xml details -----
<BPELSuitcase>
<BPELProcess id="Airtricity_Credit" src="Airtricity_Credit.bpel">
<partnerLinkBindings>
<partnerLinkBinding name="Read_Credit_File">
<property name="wsdlLocation">Read_Credit_File.wsdl</property>
<property name="validateXML">true</property>
</partnerLinkBinding>
</partnerLinkBindings>
<activationAgents>
<activationAgent className="oracle.tip.adapter.fw.agent.jca.JCAActivationAgent" partnerLink="Read_Credit_File">
<property name="portType">Read_ptt</property>
<property name="rejectedMessageHandlers">
file://C:\product\10.1.3.1\OracleAS_1\bpel/samples/tutorials/124.AQAdapter/AQMessageRejectionHandler/rejected
</property>
</activationAgent>
</activationAgents>
</BPELProcess>
</BPELSuitcase>
++++++++++++++++++++++++++++++
Please help.
Thanks ,
vikram Singh -
Receive File Adapter - Error in CallSAPAdapter Name not known
Using xml to File Adapter. Just want to store the xml file somewhere ie on XI Server in folder E:\usr\sap\interface\XMLfiles
Getting error in Adapter Engine - Exception caught by adapter framework: Object not found in lookup of CallSAPAdapter.
Delivery of the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Object not found in lookup of CallSAPAdapter.: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of CallSAPAdapter..
Receiver Adapter configured to receive file write a .tmp version no conversion so set type to Binary.
I can see the Communication Channel in the monitor green.
Any ideas to find the problem
thanks,I tried changing the communication channel as suggested with no further success. I have viewed the LogViewer on the server in cluster->server->logs defaultTrace.trc and com.sap.xi -> xi.log with no more information available.
So is it that I cannot do a simple XML send to file receiver and leave its content unchanged?
My test message payload was of the order
<?xml version="1.0"?><LIST><S_STX><C_STDS><D_STDS1>... with all the data in.
Adapter type = file
Receiver
Transport Protocol = File System (NFS)
Message Protocol = File
Adapter Engine = Integration Server
Target Directory = E:/usr/sap/Interfaces/XMLFiles (and tried it with /usr/sap/interface/XMLFiles)
Create filedirectory = ticked
Filename filename.xml
File Construction Mode = add timestamp
Write Mode = use temporary file
Temporary filename scheme = filename.tmp
Filetype = Binary
Module Tab
1 localejbs/CallSAPAdapter Local Enterprise Bean 0
and thats it.
On testing from the Integration Engine it reaches the Adapter Engine and reports the error as stated in my first post.
The message data is of the construct
- <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
- <SOAP:Header>
- <sap:Main xmlns:sap="http://sap.com/xi/XI/Message/30" versionMajor="3" versionMinor="0" SOAP:mustUnderstand="1" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7">
<sap:MessageClass>ApplicationMessage</sap:MessageClass>
<sap:ProcessingMode>asynchronous</sap:ProcessingMode>
<sap:MessageId>09c99665-f3cf-d247-993b-8cb46c37d820</sap:MessageId>
<sap:TimeSent>2007-09-19T16:42:31Z</sap:TimeSent>
- <sap:Sender>
<sap:Party agency="http://sap.com/xi/XI" scheme="XIParty">AS2</sap:Party>
<sap:Service>XMLFILE</sap:Service>
</sap:Sender>
- <sap:Receiver>
<sap:Party agency="http://sap.com/xi/XI" scheme="XIParty">MyCompany</sap:Party>
<sap:Service>XMLFILE</sap:Service>
</sap:Receiver>
<sap:Interface namespace="http://warburtons.com/genhdr">MI_XMLFILE_V3</sap:Interface>
</sap:Main>
- <sap:ReliableMessaging xmlns:sap="http://sap.com/xi/XI/Message/30" SOAP:mustUnderstand="1">
<sap:QualityOfService>ExactlyOnce</sap:QualityOfService>
</sap:ReliableMessaging>
- <sap:Diagnostic xmlns:sap="http://sap.com/xi/XI/Message/30" SOAP:mustUnderstand="1">
<sap:TraceLevel>Information</sap:TraceLevel>
<sap:Logging>Off</sap:Logging>
</sap:Diagnostic>
- <sap:HopList xmlns:sap="http://sap.com/xi/XI/Message/30" SOAP:mustUnderstand="1">
- <sap:Hop timeStamp="2007-09-19T16:42:31Z" wasRead="false">
<sap:Engine type="IS">is.00.srvsapxidev</sap:Engine>
<sap:Adapter namespace="http://sap.com/xi/XI/System">XI</sap:Adapter>
<sap:MessageId>09c99665-f3cf-d247-993b-8cb46c37d820</sap:MessageId>
- <sap:Branch>
<sap:MessageId>707ecbbd-a474-514d-b731-f4003c38c4df</sap:MessageId>
<sap:Party agency="http://sap.com/xi/XI" scheme="XIParty">ASD</sap:Party>
<sap:Service>IP_I_XMLFILE_Collect</sap:Service>
</sap:Branch>
- <sap:Branch>
<sap:MessageId>09c99665-f3cf-d247-993b-8cb46c37d820</sap:MessageId>
<sap:Party agency="http://sap.com/xi/XI" scheme="XIParty">MyCompany</sap:Party>
<sap:Service>XMLFILE</sap:Service>
</sap:Branch>
<sap:Info>3.0</sap:Info>
</sap:Hop>
- <sap:Hop timeStamp="2007-09-19T16:44:56Z" wasRead="false">
<sap:Engine type="AE">af.xid.srvsapxidev</sap:Engine>
<sap:Adapter namespace="http://sap.com/xi/XI/System">XIRA</sap:Adapter>
<sap:MessageId>09c99665-f3cf-d247-993b-8cb46c37d820</sap:MessageId>
</sap:Hop>
</sap:HopList>
</SOAP:Header>
- <SOAP:Body>
- <sap:Manifest xmlns:sap="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-manifest-5CABE13F5C59AB7FE10000000A1551F7">
- <sap:Payload xlink:type="simple" xlink:href="cid:[email protected]">
<sap:Name>PayloadName</sap:Name>
<sap:Description>PayloadDescription</sap:Description>
<sap:Type>Application</sap:Type>
</sap:Payload>
</sap:Manifest>
</SOAP:Body>
</SOAP:Envelope>
The Payload is
<?xml version="1.0" ?>
- <LIST>
etc
Message status
2007-09-19 17:44:56 Success Message successfully received by messaging system. Profile: XI URL: http://srvsapxidev:50000/MessagingSystem/receive/AFW/XI Credential (User): XIISUSER
2007-09-19 17:44:56 Success Using connection File_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
2007-09-19 17:44:56 Success Message successfully put into the queue.
2007-09-19 17:44:56 Success The message was successfully retrieved from the receive queue.
2007-09-19 17:44:56 Success The message status set to DLNG.
2007-09-19 17:44:56 Success Delivering to channel: CC_toMyCompany_XMLFILE
2007-09-19 17:44:56 Error Exception caught by adapter framework: Object not found in lookup of CallSAPAdapter.
2007-09-19 17:44:56 Error Delivery of the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Object not found in lookup of CallSAPAdapter.: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of CallSAPAdapter..
2007-09-19 17:44:56 Success The asynchronous message was successfully scheduled to be delivered at Wed Sep 19 17:49:56 BST 2007.
2007-09-19 17:44:56 Success The message status set to WAIT.
Now I have been reading all the documentation available and forum questions in this area but there is a lot of information but not quite for what I am currently trying to do. I need to preserve the xml file as xml for further processing. This is just a resting place for the file as I am trying to cut down a long running (over a day) collect BPM scenario by collecting the files in the directory then triggering the collect scenario to read in the files from this directory and perform all the processing and mapping in one chunk of short time. (But that is another story)
Any more suggestions appreciated could the SAPCallAdapter not be where I think it is? Does my directory and filename case have to be exact lower and upper case. (I will test this tomorrow)...and let you know if any difference and continue to read the links put on by the other person who answered.
thanks, -
XI3.0 Inbound File Adapter Error on ModuleSLDAccessir.
Greeting,
I have just installed the technical Adapter for XI.3 I tried to use the Inbound File adapter, unfortunately I had two big issues:
1- I was able to execute run_adapter.bat but nothing was reaching the XI system.
When I checked the Log File: I found the following error:
Oct 13, 2004 1:22:08 PM ...aii.messaging.adapter.ModuleSLDaccess [Thread-9] Error: Initializing ModuleSLDaccessor failed with 'java.lang.NoClassDefFoundError: com/tssap/dtr/client/lib/protocol/HTTPException'
2- Second issue: when I try to access the adapter via the browser, the HTML page are not correct ! there is no text displayed. I just got code like : {!%5124_G_XMIT%!}
is there other setting to do ? I followed exactly the install book !
Thanks for your help.
Regards.
M. Zehana
Any help is more than welcome.Check that you are using XI 3.0. You dont have to use the run_adapter.bat unless you are using the J2SE adapter ( which is 2.0 ) to communicate with an XI3.0 IS. If you have XI3.0 the adapters are configured in the integration directory which are now called communication channels. Therefore an inbound file adapter will be called a sender communication channel. You can create a communication channel either within a scenario or directly in the objects area for the Service ( business system etc ).
Mark
Maybe you are looking for
-
Problem with updating apps in Ipad 3 with ios 7.1
I have an Ipad 3 with ios 7.1. From April, 2014 I am having this strange problem. My Ipad apps won't update both manually and automatically. Everytime I have to "Reset all settings" in the Ipad and then only the apps would update. So please suggest h
-
My start up disk is full and i need to move my files to an external hard drive, how do i do so?
-
Can Solaris 8 be installed on 2nd HD?
I have 1 IDE HD and 2 SCSI HDs. The installer (interactive mode) always points to my Master IDE Drive to make fdisk Solaris partition. Is anyone installed Solaris 8 to the other drive?
-
Back ground image printing in smartforms
Dear all, How to print background image on A4 sheet through smartforms. Regards, Prasadbabu.
-
hi friends, how can i transport hierchies from development to quality server