RCV transaction processor not updating quantity delivered for requisitions

We are converting PO receiving transactions using PO details for each transaction. Each PO is having requisition(s) attached to it. Open interface program is not updating quantity delivered for requisitions attached to it but transactions get created successfully.
However, from iprocurement if we receive the items for requisitions it is updating the quantity delivered column.
Are we missing something??

Hi,
If you enter the receipt manually in Forms (not in iProcurement) referencing the Purchase Order, is it than behaving the same as the converted receipts?
Regards,
Marcel

Similar Messages

  • MR 11 not updating the invoicing for services

    Hi All,
    I have a scenario where the client uses MR11 for clearing the invoices.
    He does not use MIRO for invoicing.
    During our observation it is found that using MR11 does not update the invoices for services but the invoices for the material received is updated while checking the reports like ME2N.
    I have checked the Service based IV and the GR based IV in the  invoice tab of PO.
    Can you please advice me as to why this is happening only in case of services.
    Thanks and Regards
    Sridhar.

    Hi Charlie,
    Thank you very much for the response.
    Actually I am looking for the IR reduction and not the GR reduction.
    The note you have mentioned applies for GR reduction.
    Also we are in the ECC 6 environment.
    Please update me with further information.
    Regards
    Sridhar

  • Windows7 will not update it ask for a cd for ofv

    windows 7 will not update it asks for a CD for OFV 

    Hmmm. I might need some more specific information to help answer this for you. Are you trying to upgrade from Windows Vista to Windows 7?
    I am an HP employee.

  • TS3694 I can not update my iphone for resone 3004

    I can not update my iphone for resone 3004

    https://discussions.apple.com/thread/4034118
    http://support.apple.com/kb/TS3694
    https://discussions.apple.com/message/23024319#23024319
    https://discussions.apple.com/message/23023773#23023773

  • Apps are not updating,keeps asking for Apple ID,can anyone help?

    Apps are not updating,keeps asking for Apple ID and then goes back to saying update?

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Do not update in qty for asset transaction

    Dear all,
    the system update the qty field in asset master data when transaction take effects. But there is any why that qty field in asset master data do not update  after transaction takes place like when transfer from one asset "a" to asset "b" with t code ABUMN.
    asset a with qty 1 and asset b with qty 2 in the master record,
    when transfer from a to b the system must not update the qty field in asset master data that the system updates to 3.
    How can the system do update qty ?????
    regards

    Hi,
    This is the standard behaviour of the system.
    If a transfer takes place from asset X to asset Y, then the system adds the sending asset's qty to receving asset's qty, only if the both UOM are same.
    Often users create an asset master with values in qty fields also, but that qty field should be blank only, since the qty will be added to it through asset transaction only.(if earlier qty is 0 and transaction qty is 1, then it would be 0+1=1)
    In your case you might have created your second asset with 2 qty and transfered 1 qty from sending asset, so the system added the both quantities in receiving asset. ( 1+2=3), as you are aware of this.
    Thanks,
    Srinu

  • Accounting Document not updated in BKPF for JV by J1IH

    Hi
    The user posted JV through transaction code J1IH.
    The document number is updated in table J_1IPART2 but when the user is trying to see the same document in FB03 we are getting the error message as "the document is not exist or not archived".
    And we have checked in tables BKPF and BSEG we did not find this document.
    Can anyone please suggest how to find the reason why the system is not updated this document?
    Regards
    RS

    Hi Hari,
    Thanks for your reply. I have checked in this transaction code also. The system is showing the message as "The document is already posted".
    But it is not updated any tables except the document number is updated in table  J_1IPART2.
    Is there any other reasons for not updating the tables.
    Regards
    RS

  • BAPI_PO_CHANGE is not updating Quantity and Delivary Date

    HI All,
    I am trying to update quantity and delivery date of PO by using BAPI_PO_CHANGE,
    by Passing below parameters.
    As per the documentation:
    Parameter: PURCHASEORDER 4500003477
    Parameter: POHEADER
    PMNTTRMS = 0002
    PUR_GROUP = 002
    Parameter: POHEADERX
    PMNTTRMS = X
    PUR_GROUP = X
    Parameter: POITEM
    PO_ITEM = 00001
    CONF_CTRL = 0001
    Parameter: POITEMX
    PO_ITEM = 00001
    PO_ITEMX = X
    CONF_CTRL =  X
    Parameter: POSCHEDULE
    PO_ITEM = 00001
    SCHED_LINE = 0001
    QUANTITY = 10.000
    Parameter: POSCHEDULEX
    PO_ITEM =  00001
    SCHED_LINE =  0001
    PO_ITEMX =  X
    SCHED_LINEX =  X
    QUANTITY =  X
    Parameter: POACCOUNT
    PO_ITEM = 00001
    SERIAL_NO = 01
    GL_ACCOUNT = 0000400020
    Parameter: POACCOUNTX
    PO_ITEM = 00001
    SERIAL_NO = 01
    PO_ITEMX = X
    SERIAL_NOX = X
    GL_ACCOUNT = X
    and executed bapi_transaction_commit FM immediate, i am getting below message
    Purchase Orders 4500003477 changed
    Error transferring ExtensionIn data for enhancement CI_COBL
    No message generated for output of purchasing document
    but quantity and delivery date was not  changed..
    why this quantity and delivery date is not changing?
    <removed by moderator>
    REgards,
    Suresh.D
    Edited by: Thomas Zloch on Feb 27, 2012

    Hi ,
    Are you trying to pass the non char fields in CI_COBL. Please look at the link below .
    [http://forums.sdn.sap.com/thread.jspa?threadID=1137795] .
    Also serach for the similar threads when and notes while transferring currency and quantity field in different custom includes of the EKPO ...
    Thanks,
    Anjaneya .

  • Do not updated quantity in transit field in DELINS JIT

    Hi,
    I have EDI defect in hand which states that Quantity field in transit for DELINS JIT has to be not updated. What exactly this means?
    Can any one let me know what needs to be done?
    Raghuram.

    Dear Raghu
    I am not very clear about your problem.  However, DELINS is nothing but  Message Type system shows which is an enhanced EDI Interface.
    If I am correct, while you are trying to create outbound delivery, the said error shows.  Am I right??
    If so, enter the quantity you want to delivery and save.
    Thanks
    G. Lakshmipathi

  • Batch Characteristic not updating with result for linked MIC

    Hi,
    I have created a MIC and linked to a batch characteristic i.e. potency and included the characteristic in a specific batch class. This MIC is part of the inspection plan for a certain material.
    If I generate a lot of origin 01 and 09 for the material and record a result for the MIC and apply a UD, the batch characteristic is not updated with the result recorded in the batch master record..
    If I generate a lot origin 89 for the same material, when the result is recorded for the MIC and apply a UD the batch characteristic is updated with the mic value in the batch master record.
    Can you help regards?

    Ok. I am a little bit further.
    I put a trace (ST05) on the result recording and I find a difference between 4.7 and ECC6.0.
    In ECC6.0 I've an deletion in table "AUSP". This deletion isn't performed in the 4.7 system.
    Hope that this can help to solve my problem.
    Regards,
    René
    @ Mayank
    Above, all the master data and customizing is mentioned to transfer the result to the batch classification
    Edited by: Rene Fuhner on Jul 30, 2010 7:03 PM

  • Exclaimer manager signature does not update sent items for outlook 2013 clients when using cached mode

    Hi
    I have Signature Manager Exchange Edition 2.0.3.0 installed on the hub servers.
    I have enabled  Sent Items update.
    some clients are not getting signature update in the sent items of outlook while using cached mode.
    from OWA, and MS Outlook when connected online, the signature is updated in the sent items.
    I have two CAS servers and two mailbox servers. all with Exchange 2013 SP1
    I tested each CAS server for the URLs of Autodiscover and EWS, with no errors or warnings.
    I also test Autodiscover through
    https://testconnectivity.microsoft.com . I go successful result.
    Outlook clients are updated to the latest version 15.0.4701.1000
    for outlook clients; I deleted outlook profile, deleted outlook folder in the user profile, re-created the  outlook profile, with no luck.
    from Exclaimer event logs on the Hub servers. the sent items update is successfully updating clients. below is the screenshot of an event for one email message which is successfully updated from exclaimer but it did not update on the client outlook while
    using cached mode.
    Since the issue is with multiple users, I am searching for a centralized solution 
    Mashhour Faraj

    Dear Mashhour
    Here you go 
    Employees can see their email signatures and disclaimers
    With Exchange 2013, a Microsoft Outlook user can’t see any added email signatures or disclaimers as they are added to an email when it passes through the Exchange server.
    Signature Manager Exchange Edition lets email users see their email signature and corporate disclaimer within the Sent Items of their inbox, giving them visual confirmation of the processed email
    Source - 
    http://blog.exclaimer.com/exclaimer-signature-manager-vs-microsoft-exchange-2013/
    Updating to the latest version of signature manager exchange edition will help you to resolve this problem for sure 
    Or you need to contact them to find a solution on this .
    I'm pretty much sure that this problem is related with some version mismatch on their s/w on exchange 2013 which is causing this issue.
    Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
    (MVP)

  • Itunes Store Has not updated my podcast for 5 months

    I have been maintaining 4 separate podcasts for about a year and I have one feed that will not update in the itunes store but if you subscribe to the feed then all of the episodes are there. I do not use any program to create the XML files, I just edit them with the required info. Any help with this would be great.
    THanks
    Here is the Feed
    http://itunes.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=262138599
    Here is my XML file.
    http://www.libertychurch.net/audio/nc/podcast.xml

    Your feed is littered with <!-- and --> ; these are intended to enclose comments and prevent them being shown except when viewing the feed directly for programming purposes. They are excluding large chunks of your feed from being read. How did they get there? You should look closely at the feed (which as it stands only seems to contain three viable episodes:
    Numbers: Zhongwen Vol 1 Lesson 1
    Dixie 400: A Flea Market in North Georgia
    Jobs
    and remove any of these tags you don't need. I can't check on iTunes until tomorrow morning but I would expect it not to show the other two episodes either.
    Also FeedValidator comments 'Feeds should not be served with the "text/plain" media type' - I don't know whether this could be an issue: please see this note at FeedValidator:
    http://www.feedvalidator.org/docs/warning/UnexpectedContentType.html

  • Auto Run Program not updating Settlement Rules for few WBS elements

    Hi,
    Addition of settlement rules for OPEX WBS.
    In producion system, two jobs are running daily for generating settlement rules of WBS elements but, all WBS elements are not updating with Settlement rules.
    It is becoming a problem in the Period end while doing the settlement. Currently we are updating the settlement rule manually.
    We have investigated and found the following WBS element with Profile name  are not updating Settlement rule.
    H-U0DU0204DE-EX-J0  - HHDC01
    H-N0U00ULD01-P1-D1-W2 - 000090
    H-U0DU0204DE-EX-U0-T1-OB - HHDC01
    H-U0DU0204DE-EX-U1-W1-ON - HHDC01
    H-U0DU0204DE-EX-U2-W1-ON - HHDC01
    H-U0DU0204DE-EX-I0-E1 - HHDC01
    H-U0DU0204DE-EX-I0-B1 -HHDC01
    H-U1DU0204DE-EX-U0-W1-ON - HHDC01
    Job Names :
    ZFPD_UK_SETTLEMENT_RULE_GEN
    ZFPD_NO_SETTLEMENT_RULE_GEN
    Please suggest on this issue
    Regards

    Hi,
    I suppose these are background jobs. Usually there is an issue with background jobs that are run for a custom developed program. Not sure why that happens. Even i faced this issue with a couple of jobs in my system. I have still not found out the reason as to why this happens. There might be a possibility that these projects were being processed in the foreground by some user and hence they were omitted from the run.
    I would suggest you to consult your technical guys on this.
    Regards,
    Gokul

  • HT1229 itunes will not update ipod cache for iPhoto 11

    My itunes does not update my iphone 4s to the latest pictures loaded onto iphoto 11, no updates available. Any clues as to what is wrong, could Pixelmator be the problem?

    Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
    Look there for the iPod Photo Cache.
    Trash it. Start iPhoto and try sync again.
    Regards
    TD 

  • Receiving Transaction Processor not processing PENDING records

    Good day,
    I have pending records sitting in the RCV_HEADERS_INTERFACE, RCV_TRANSACTIONS_INTERFACE and MTL_SERIAL_NUMBERS_INTERFACE. The PROCESSING_STATUS_CODE is set to "BATCH". But when I run the Receiving Transaction Processor nothing happens. The records are still in the interface tables as pending and the PO_INTERFACE_ERRORS table does not get populated with errors.
    Kindly help by suggesting what I'm doing wrong. Why is the processor not picking up the records?
    Thanking you in advance.

    How are you trying to receive the items. Is it through iProcurement or Core Purchasing Forms?

Maybe you are looking for

  • Unable to Enforce Unique Values, Duplicate Values Exist

    I have list in SP 2010, it contains roughly 1000 items.  I would like to enforce unique values on the title field.  I started by cleaning up the list, ensuring that all items already had a unique value.  To help with this, I used the export to excel

  • ICal Alarm show event button broken

    When an iCal alarm reminder pops up, clicking the button to show the details of the event has no effect. This is a new problem since using the transfer wizard to move to a new computer. I tried deleting all the iCal preferences and searching the disc

  • XI and IDOC-Adapter / Restriction to certain IDOC Types?

    Hi all! We have some problems in trying to enable our XI systems for using our central user administration. The reason for that is that the "USERCLONE", ... IDOCs sent to XI by the CUA system are not processed normally in the ALE Layer but XI tries t

  • Reporting on Alternate Hierarchy master data (HR-BW)  thru DSO object

    I have a quick question. I would appreciate if you know of any direction to approach this. We have a hierarchy in a external system that we want to bring into BW as alternate hierarchies. The hier nodes are a bunch of leagacy hierarchies and the leav

  • Help detaching Zen Nano P

    I am clicking the icon on my taskbar to safely remove my zen nano fromthe usb, but the computer is not letting me remove it, it says the generic volume cannot be stopped right now, try again later please someone help me