RCV_TRANSACTIONS_INTERFACE return error Primary quantity
Dear All,
I have a problem.
I am using RCV_TRANSACTIONS_INTERFACE to do return to vendor.
If the item setup with ASL, then it will failed with error message :
Primary quantity 250 exceeds available subinventory quantity 0
Cause: The transaction quantity 250 in primary unit of measure exceeds the available quantity 0 in the subinventory.
Action: Enter a smaller quantity.
But if I unchecked the asl setup, it would work well.
By the way, the item was setup with lot control.
If the item was setup without lot contol, it would work well with change receiving option.
In the screen over receipt control and change action to 'None', then itme without lot control worked very well.
Could someone tell me how to resolve the problem?
Check if the purchasing UOM on the ASL attributes is coming into play.
Remove it and retry.
Hope this helps
Sandeep Gandhi
Independent Techno-functional Consultant
Similar Messages
-
Error RVTSH-189: Subroutine rvtshiline() returned error
Hi All,
I am new using OM, using R12
I am inserting record into rcv_headers_interface and rcv_transactions_interface and then running the Receiving Transaction Processor, i am getting the following error.
Error RVTSH-189: Subroutine rvtshiline() returned error
INSERT INTO rcv_transactions_interface
(interface_transaction_id,
header_interface_id,
processing_status_code,
transaction_date,
GROUP_ID,
last_update_date,
last_updated_by,
creation_date,
created_by,
transaction_type,
processing_mode_code,
transaction_status_code,
quantity,
to_organization_id,
source_document_code,
po_header_id,
po_line_id,
po_line_location_id,
po_distribution_id,
comments,
org_id
VALUES
(rcv_transactions_interface_s.NEXTVAL,
rcv_headers_interface_s.CURRVAL,
'PENDING',
SYSDATE,
rcv_interface_groups_s.CURRVAL,
SYSDATE,
-1,
SYSDATE,
-1,
'RECIEVE',
'BATCH',
'PENDING',
20,--quantity
83,
'VENDOR',
301,--po_header_id
321,--po_line_id
321,--po_line_location_id
301,--po_distribution_id
'TEST',
83);
update rcv_transactions_interface
set processing_mode_code = 'BATCH',
processing_status_code = 'PENDING',
processing_request_id = null,
transaction_status_code = 'PENDING',
transaction_type = 'RECEIVE',
source_document_code = 'INVENTORY',
destination_type_code = 'INVENTORY',
AUTO_TRANSACT_CODE = 'DELIVER',
RECEIPT_SOURCE_CODE = 'INVENTORY',
CHARGE_ACCOUNT_ID = 4037,
UNIT_OF_MEASURE = 'Each',
quantity =20
am i missing some column that needs to be entered or updated?
Any help on this would be appreciated.
RegardsPl see if these MOS Docs can help
1080050.6 - GET ERRORS RVTSH-140 RVTSH-189 when run Receiving Transaction Processor
121907.1 - RVCTP: RVTSH-140 RVTSH-189 SUBROUTINE RVTSHILINE RETURNED ERROR
369258.1 - Receipts Failing with RVTS-189 for Receiving Open Interface Transaction
HTH
Srini -
Uln-yum-mirror [Errno 14] PYCURL ERROR 22 - The requested URL returned error: 416
Server is running Oracle Linux 6.5 and can receive updates from ULN without issue, I could easily upgrade the local servers version of Bash. The problem I am having is that the server is the local yum server however it is not downloading updates when I run /usr/bin/uln-yum-mirror I am receiving the errors below
[root@cr-svc-orayum1 yum]# cat /etc/oracle-release
Oracle Linux Server release 6.5
[root@cr-svc-orayum1 yum]# yum repolist
Loaded plugins: refresh-packagekit, rhnplugin, security
This system is receiving updates from ULN.
ol6_x86_64_UEKR3_latest/primary | 8.5 MB 00:21
ol6_x86_64_UEKR3_latest 234/234
ol6_x86_64_latest/primary | 41 MB 01:46
ol6_x86_64_latest 26159/26159
repo id repo name status
ol6_x86_64_UEKR3_latest Unbreakable Enterprise Kernel Release 3 for Oracle Linux 6 (x86_64) - Latest 234
ol6_x86_64_latest Oracle Linux 6 Latest (x86_64) 26,159
repolist: 26,393
[root@cr-svc-orayum1 yum]# yum clean all
Loaded plugins: refresh-packagekit, rhnplugin, security
Cleaning repos: ol5_x86_64_UEK_base ol5_x86_64_ksplice ol5_x86_64_latest ol6_x86_64_UEKR3_latest ol6_x86_64_latest
Cleaning up Everything
[root@cr-svc-orayum1 yum]#
[root@cr-svc-orayum1 yum]# /usr/bin/uln-yum-mirror
## BEGIN PROCESSING ol5_x86_64_ksplice ##
Channel Dir: /var/www/html/yum/OracleLinux/OL5/ksplice/x86_64
Loaded plugins: refresh-packagekit, rhnplugin
This system is receiving updates from ULN.
Saving Primary metadata
Saving file lists metadata
Saving other metadata
Generating sqlite DBs
Sqlite DBs complete
Wrote: /var/www/html/yum/OracleLinux/OL5/ksplice/x86_64/repodata/updateinfo.xml.gz
type = updateinfo
location = repodata/updateinfo.xml.gz
checksum = bd8daef04c28ee5907c0482c5a55e5fdb2c56fae
timestamp = 1412066205.18
open-checksum = cd80d41782f6770822485ade46f1a8bf75cfa20b
Wrote: /var/www/html/yum/OracleLinux/OL5/ksplice/x86_64/repodata/repomd.xml
## END PROCESSING ol5_x86_64_ksplice ##
## BEGIN PROCESSING ol5_x86_64_latest ##
Channel Dir: /var/www/html/yum/OracleLinux/OL5/latest/x86_64
Loaded plugins: refresh-packagekit, rhnplugin
This system is receiving updates from ULN.
Could not retrieve package alsa-lib-devel-1.0.17-1.el5.i386. Error was failed to retrieve getPackage/alsa-lib-devel-1.0.17-1.el5.i386.rpm from ol5_x86_64_latest
error was [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 416 Requested Range Not Satisfiable"
Could not retrieve package alsa-lib-devel-1.0.17-1.el5.x86_64. Error was failed to retrieve getPackage/alsa-lib-devel-1.0.17-1.el5.x86_64.rpm from ol5_x86_64_latest
error was [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 416 Requested Range Not Satisfiable"
Could not retrieve package alsa-utils-1.0.17-7.el5.x86_64. Error was failed to retrieve getPackage/alsa-utils-1.0.17-7.el5.x86_64.rpm from ol5_x86_64_latest
error was [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 416 Requested Range Not Satisfiable"
Could not retrieve package 5:am-utils-6.1.5-9.el5_10.x86_64. Error was failed to retrieve getPackage/am-utils-6.1.5-9.el5_10.x86_64.rpm from ol5_x86_64_latest
error was [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 416 Requested Range Not Satisfiable"
Could not retrieve package amanda-devel-2.5.0p2-9.el5.i386. Error was failed to retrieve getPackage/amanda-devel-2.5.0p2-9.el5.i386.rpm from ol5_x86_64_latest
error was [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 416 Requested Range Not Satisfiable"
Could not retrieve package amanda-server-2.5.0p2-9.el5.x86_64. Error was failed to retrieve getPackage/amanda-server-2.5.0p2-9.el5.x86_64.rpm from ol5_x86_64_latestFirst, you need to upgrade to the latest version of uln-yum-mirror to avoid these errors in future. The latest version has mitigation tools to remove RPMs that fail GPG checking.
In this instance, you need to manually delete the RPMs that pyCURL can't download. Once you delete all the RPMs, the next run of uln-yum-mirror will download them fresh and recreate the yum metadata locally. -
RVTSH-189: Subroutine rvtshiline() returned error
HI everyone,
Iam trying to import reciept data from RCV_HEADERS_INTERFACE AND RCV_TRANSACTIONS_INTERFACE to base tables.
But when iam running the concurrent program receiving transaction processor, it is completing successfully. But in the PO_INTERFACE_ERRORS iam getting the below error.
RVTSH-189: Subroutine rvtshiline() returned error
Cause: Subroutine rvtshiline() returned an internal error.
Action: Note this error number and the actions you are trying to perform. Contact your system administrator for
Any help regarding above would be helpful to me.
PS:I have seen threads regarding this error but iam unable to find solution.HI sandeep..
My problem has been solved. During inserting into RCV_TRANSACTIONS_INTERFACE, I haven't inserted the VALIDATION_FLAG column. After inserting the column the base tables are populated.
Thank you
with regards
vijay
Edited by: vi**** on Sep 14, 2011 11:11 PM -
The software change returned error code 0x87D00607(-2016410105).
Hi to everyone. I am learning SCCM 2012 R2 using book Mastering SCCM 2012 R2 in addition to various video trainings and online resources. Currently I am focused on application deployment. I created Foxit Reader application - msi deployment type, distributed
it to DP and deployed it to device collection containing only one test computer (Win 7 Pro SP1 x64). Having done all these steps I went to client's Software Center and Application Catalog. Foxit Reader app is visible but as soon as I click on Install
button I receive an error:
The software change returned error code 0x87D00607(-2016410105).
I deployed Office 2013 a few days ago (although I am struggling to uninstall it silently) without problems. Meanwhile I did not change anything related to boundaries, boundary groups and DPs. I have only one SCCM 2012 R2 server (Primary stand-alone site).
I hate these situations when I follow along some official learning material such as this book, doing everything the same as it is done there and it does not work at all.
Unfortunately I can not afford official MS training, my company does not invest in their system engineers so we are on our own. It is nice to learn something by yourself but situations like this take too much time - probably on official training it would be
solved immediately.Its likely that your problem is being caused by incorrectly configured boundaries with Configuration Manager. There are quite a few blogs on this particular error, as an example:
http://www.vmadmin.co.uk/microsoft/64-mssystemcenter/350-sccm2012errorboundary87d00607
and
http://peerk.blogspot.com.au/2013/01/sccm-2012-app-stuck-at-downloading-0.html
or
http://heineborn.com/tech/application-installation-error-0x87d00607/
Take a look at your boundaries and make sure that you have one configured relative to the location of the Distribution Point that the client is trying to download content from.
Cheers
Damon -
Returning Errors from a webservice using XMLBeans
I have a webservice that accepts XML as input and output parameters, and I'm using XMLBeans to handle this. I'm trying to work out how I can return error information from the webservice, so I created an Exception.xsd schema and 'include' it in the output XML Schema, so an exception xml element is valid in the output schema. The problem is, the XMLBean class generated from the output XML schema has no methods that allow me to create an Exception element. Is there some other way of handling the return of exceptions from webservices using XML?
The answer is just throw a SoapFaultException and put the exception.xsd XMLBean in the FaultDetail section of the SoapFaultException.
-
Inventory Error :Transaction quantity must be = available quantity.
An error occurred while relieving reservations.|Transaction quantity must be less than or equal to available quantity.
while doing material transactions in transaction open interface iam getting above error......Kindly help me as i am struck here and it is high priority issue and need to be resolved as soon as possible..refer -
Pending Move Transactions FAQ [ID 1141334.1]
WIP_MOVE_TXN_INTERFACE Common Errors In Pending Move Transactions With Possible Causes And Action Plan To Process Them [ID 457066.1]
Outside Processing Wip Move Transaction Fails With Overcompletion Quantity [ID 427558.1]
Pending Move Transaction Error - Allow Moves Not Enabled [ID 780732.1]
R12 OSP Job (Also Repetitive Schedule) Do Not Support Overcompletion: Error 'Transaction quantity must be less than or equal...' [ID 563011.1]
cheers,
VB -
Bug Report - DB toolkit returns error when calling the DefaultDatabase property with SQLite
There's an old bug in the DB toolkit where calling the DefaultDatabase property returns error -2147217887 if you're using certain DBs (such as SQLite or PostgreSQL and I believe MySQL as well).
The problem is that this property is called by a VI which is used in some of the commonly used VIs (such as the insert VI),
causing them to fail. Whoever wrote the code was aware of this issue,
since they added a comment about it, as you can see below.
The immediate fix for this is pretty easy - add code to ignore the error or don't call the property at all. It's not used anywhere in the toolkit and unless you're using the VI yourself to get the property, this won't break any code. The problem with this is that you need to do this in every PC.
NI already has a CAR for this (CAR 232063) and should hopefully fix it, so there's no need to take further action at the moment. This post is for people searching for this in the future.
Try to take over the world!Interesting. I have seen this before but it returned a different error code. (Error -2147352567)
=====================
LabVIEW 2012 -
After upgrading to Lion the bookmarks in Preview returns error message.
After upgrading to Lion the bookmarks in Preview returns error message : The File "****" couldn't be opened because you don't have permission to view it. To change the perimssion, select the item in finder and Choose File info. I have bookmarked plenty of files in Preview. How to overcome this error message???
Doesn't work Steve. I think it is an issue with Preview being sandboxed (check the sandbox column in Activity Monitor: Preview = Yes). Sandboxed apps restrict file access to those the user has explicitly selected. My theory is that this causes the unfortunate side effect of bookmarked or linked PDFs not working. A simple test: open a file with bookmarks, manually open the bookmarked file and then select the bookmark in the first file - it should open with no complaints about permissions (which leads to a weak workaround: open all the PDFs you intend to work with!).
-
SSRS expression returns #error value in some cells
Hello,
What do you think below expression sometimes return #error value in ssrs.
=SUM(Fields!X.Value / 100 * DateDiff(DateInterval.Day,Fields!s_date.Value,Fields!e_date.Value)) /
IIF( SUM(DateDiff(DateInterval.Day,Fields!s_date.Value,Fields!e_date.Value)) = 0
,nothing
,SUM(DateDiff(DateInterval.Day,Fields!s_date.Value,Fields!e_date.Value))Hi,
Use below expression to overcome the issue:
=
IIF( SUM(DateDiff(DateInterval.Day,Fields!s_date.Value,Fields!e_date.Value)) = 0
, 0
, SUM( Fields!X.Value / 100
* DateDiff(DateInterval.Day,Fields!s_date.Value,Fields!e_date.Value)
SUM(DateDiff(DateInterval.Day,Fields!s_date.Value,Fields!e_date.Value))
Thanks, Madhu
Hi madhu,
I have value for Month field as 0. I have used MonthName function in the report. So im getting error as #Error
Expression:
MONTHNAME(Fields!Month.Value)& " "& Fields!Day.Value &" "& Fields!Year.Value
Please help me to resolve the issue.
Thanks in Advance..
Regards,
LuckyAbdul -
Package Returning Error ORA-06502: PL/SQL: numeric or value error
Hi,
I create a package to export to spread sheet .xls, The package work for simple query if i pass the query to package.
There is no error in package please create the package and do the following as mentioned below
create or replace
PACKAGE export_pkg_spread_sheet
AS
procedure download_excel(vsql in clob );
PROCEDURE excel_header(p_header in out nocopy clob);
procedure excel_content(p_content in out nocopy clob,
vsql in clob );
procedure excel_footer(p_footer in out nocopy clob);
procedure get_usable_sql (p_sql_in IN clob,
p_sql_out OUT clob);
END export_pkg_spread_sheet;
create or replace
PACKAGE body export_pkg_spread_sheet
AS
PROCEDURE excel_header (p_header IN OUT nocopy CLOB)
AS
BEGIN
p_header := '<html><body>';
END;
procedure download_excel( vsql in clob )
as
p_header clob;
p_footer clob;
p_content clob;
begin
owa_util.mime_header( 'application/octet', FALSE );
htp.p('Content-Disposition: attachment; filename="report.xls"');
owa_util.http_header_close;
excel_header( p_header);
excel_content(p_content,vsql);
excel_footer(p_footer);
dbms_output.put_line(p_header ||p_content|| p_footer);
HTP.PRN( p_header ||p_content|| p_footer);
htmldb_application.g_unrecoverable_error := true;
end;
procedure excel_content(p_content in out nocopy clob,
vsql in clob)
as
p_sql_stmt clob;
cur PLS_INTEGER := DBMS_SQL.OPEN_CURSOR;
cols DBMS_SQL.DESC_TAB;
ncols PLS_INTEGER;
TYPE varColumn IS TABLE OF varchar2(32000);
vtab varColumn;
v_column_count NUMBER DEFAULT 0;
v_status INTEGER;
BEGIN
htp.prn('am here');
/* SELECT region_source into p_sql_stmt
FROM apex_application_page_regions
WHERE region_id = p_region_id AND
page_id = p_page_id AND
application_id = p_app_id; */
get_usable_sql (vsql,p_sql_stmt);
p_content := p_sql_stmt;
-- Parse the query.
DBMS_SQL.PARSE(cur, p_sql_stmt , DBMS_SQL.NATIVE);
-- Retrieve column information
DBMS_SQL.DESCRIBE_COLUMNS (cur, ncols, cols);
-- Display each of the column names
p_content := '<table> <tr>';
FOR colind IN 1 .. ncols
LOOP
p_content := p_content || '<td>' || cols(colind).col_name || '</td>';
END LOOP;
p_content := p_content || '</tr>';
vtab := varColumn(null);
for i in 1..ncols
loop
vtab.extend;
DBMS_SQL.DEFINE_COLUMN (cur, i, vtab(i), 2000);
--dbms_output.put_line(vtab(i));
end loop;
v_status := DBMS_SQL.EXECUTE (cur);
LOOP
p_content := p_content || '<tr>';
EXIT WHEN (DBMS_SQL.FETCH_ROWS (cur) <= 0);
FOR i IN 1 ..ncols
loop
DBMS_SQL.COLUMN_VALUE (cur, i, vtab(i));
-- p_content := p_content || '<td>' || 'xyz' || '</td>';
p_content := p_content || '<td>' || vtab(i) || '</td>';
END LOOP;
p_content := p_content || '</tr>' ;
END LOOP;
p_content := p_content || '<table>' ;
DBMS_SQL.CLOSE_CURSOR (cur);
exception
when others then
p_content := '<td>Exception Error in printing data</td><table>' ;
DBMS_SQL.CLOSE_CURSOR (cur);
end;
procedure excel_footer( p_footer in out nocopy clob)
as
begin
p_footer := '</body></html>';
end;
PROCEDURE get_usable_sql (p_sql_in IN clob, p_sql_out OUT clob)
IS
v_sql clob;
v_names DBMS_SQL.varchar2_table;
v_pos NUMBER;
v_length NUMBER;
v_exit NUMBER;
BEGIN
v_sql := p_sql_in;
v_names := wwv_flow_utilities.get_binds (v_sql);
FOR i IN 1 .. v_names.COUNT
LOOP
<<do_it_again>>
v_pos := INSTR (LOWER (v_sql), LOWER (v_names (i)));
v_length := LENGTH (LOWER (v_names (i)));
v_sql :=
SUBSTR (v_sql, 1, v_pos - 1)
|| v_names (i)
|| SUBSTR (v_sql, v_pos + v_length);
v_sql :=
REPLACE (v_sql,
UPPER (v_names (i)),
'(SELECT v('''
|| LTRIM (v_names (i), ':')
|| ''') FROM DUAL)'
IF INSTR (LOWER (v_sql), LOWER (v_names (i))) > 0
THEN
GOTO do_it_again;
END IF;
END LOOP;
p_sql_out := v_sql;
END;
END export_pkg_spread_sheet;
After creating the package pass the parameter to package like this
begin
export_pkg_spread_sheet.download_excel('select * from emp');
end;
Package will allow to download the spread shreet. If i try to pass the a complex query to package it is returning error as mentioned below
ORA-06502: PL/SQL: numeric or value error
In the above package there is a procedure called procedure excel_content which actuall prints the data in the spread sheet this is where the error is coming from there is a variable called vsql have declared it as clob to hold large string but still i am getting the same error when trying to pass a big string.
Please check the error and let me know.
Thanks
SudhirHi Praveen,
This is the query i am using to pass
Declare
qry clob;
Begin
qry := ' 'SELECT
AR.REGION_CODE,
AR.DISTRICT_CODE,
AR.TERRITORY_CODE,
CASE
WHEN AR.REGION_NAME IS NOT NULL AND AR.DISTRICT_NAME IS NULL AND AR.TERRITORY_NAME IS NULL THEN
AR.REGION_NAME
WHEN AR.REGION_NAME IS NOT NULL AND AR.DISTRICT_NAME IS NOT NULL AND AR.TERRITORY_NAME IS NULL THEN
AR.DISTRICT_NAME
WHEN AR.REGION_NAME IS NOT NULL AND AR.DISTRICT_NAME IS NOT NULL AND AR.TERRITORY_NAME IS NOT NULL THEN
AR.TERRITORY_NAME
END TERR_NAME,
AR.EMPLOYEE_ID,
AR.LAST_NAME,
AR.FIRST_NAME,
AR.GENDER,
AR.DATE_OF_HIRE,
AR.PROJECT_EMPLOYEE_TITLE_ID,
AR.COMPANY_ID,
AR.CUSTOMER_EMAIL,
AR.BUSINESS_EMAIL,
AR.CUSTOMER_VOICEMAIL,
AR.CUSTOMER_VOICEMAIL_EXT,
AR.QUINTILES_VOICEMAIL,
AR.QUINTILES_VOICEMAIL_EXT , complete_roster_pkg_report.AR_F_ADDRESS_GET_LINE_1(AR.PROJECT_ID,AR.EMPLOYEE_ID,1 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Shipping_ADDRESS_TYPE_1" , complete_roster_pkg_report.AR_F_ADDRESS_GET_LINE_2(AR.PROJECT_ID,AR.EMPLOYEE_ID,1 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Shipping_ADDRESS_TYPE_2" , complete_roster_pkg_report.AR_F_ADDRESS_GET_PHONE(AR.PROJECT_ID,AR.EMPLOYEE_ID,1 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Shipping_Phone" , complete_roster_pkg_report.AR_F_ADDRESS_GET_CITY_TOWN(AR.PROJECT_ID,AR.EMPLOYEE_ID,1 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Shipping_City_Town" , complete_roster_pkg_report.AR_F_ADDRESS_GET_COUNTRY_NAME(AR.PROJECT_ID,AR.EMPLOYEE_ID,1 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Shipping_Country_Name" , complete_roster_pkg_report.AR_F_ADDRESS_GET_STATE_NAME(AR.PROJECT_ID,AR.EMPLOYEE_ID,1 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Shipping_State_Name" , complete_roster_pkg_report.AR_F_ADDRESS_GET_ZIP_POSTAL(AR.PROJECT_ID,AR.EMPLOYEE_ID,1 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Shipping_ZipCode" , complete_roster_pkg_report.AR_F_ADDRESS_GET_LINE_1(AR.PROJECT_ID,AR.EMPLOYEE_ID,3 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Storage_ADDRESS_TYPE_1" , complete_roster_pkg_report.AR_F_ADDRESS_GET_LINE_2(AR.PROJECT_ID,AR.EMPLOYEE_ID,3 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Storage_ADDRESS_TYPE_2" , complete_roster_pkg_report.AR_F_ADDRESS_GET_PHONE(AR.PROJECT_ID,AR.EMPLOYEE_ID,3 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Storage_Phone" , complete_roster_pkg_report.AR_F_ADDRESS_GET_CITY_TOWN(AR.PROJECT_ID,AR.EMPLOYEE_ID,3 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Storage_City_Town" , complete_roster_pkg_report.AR_F_ADDRESS_GET_COUNTRY_NAME(AR.PROJECT_ID,AR.EMPLOYEE_ID,3 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Storage_Country_Name" , complete_roster_pkg_report.AR_F_ADDRESS_GET_STATE_NAME(AR.PROJECT_ID,AR.EMPLOYEE_ID,3 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Storage_State_Name" , complete_roster_pkg_report.AR_F_ADDRESS_GET_ZIP_POSTAL(AR.PROJECT_ID,AR.EMPLOYEE_ID,3 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Storage_ZipCode" , complete_roster_pkg_report.AR_F_ADDRESS_GET_LINE_1(AR.PROJECT_ID,AR.EMPLOYEE_ID,4 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Home_ADDRESS_TYPE_1" , complete_roster_pkg_report.AR_F_ADDRESS_GET_LINE_2(AR.PROJECT_ID,AR.EMPLOYEE_ID,4 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Home_ADDRESS_TYPE_2" , complete_roster_pkg_report.AR_F_ADDRESS_GET_PHONE(AR.PROJECT_ID,AR.EMPLOYEE_ID,4 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Home_Phone" , complete_roster_pkg_report.AR_F_ADDRESS_GET_CITY_TOWN(AR.PROJECT_ID,AR.EMPLOYEE_ID,4 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Home_City_Town" , complete_roster_pkg_report.AR_F_ADDRESS_GET_COUNTRY_NAME(AR.PROJECT_ID,AR.EMPLOYEE_ID,4 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Home_Country_Name" , complete_roster_pkg_report.AR_F_ADDRESS_GET_STATE_NAME(AR.PROJECT_ID,AR.EMPLOYEE_ID,4 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Home_State_Name" , complete_roster_pkg_report.AR_F_ADDRESS_GET_ZIP_POSTAL(AR.PROJECT_ID,AR.EMPLOYEE_ID,4 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Home_ZipCode" FROM AR_V_ROSTER AR
LEFT JOIN AR_V_ADDRESS_HISTORY AAH
ON
(AR.PROJECT_ID = AAH.PROJECT_ID AND
AR.EMPLOYEE_ID = AAH.EMPLOYEE_ID)
WHERE
UPPER(AR.USER_EMPLOYEE_ID) = ''Q766730'' AND
AR.PROJECT_ID = 81 ';
export_pkg_spread_sheet.download_excel(qry);
End;
Praveen you can pass your DB table query to check the error. I am trying to pass as mentioned above.
Please let me know if my question is not clear.
Thanks
Sudhir -
Pacman : returning error 16 from alpm_db_update
Recently, yaourt behave oddly on my homeserver, outputting some truncated errors messages as if they were answers from a regex search. Long story short, I tried to fix the problem but did not yet succeeded, so maybe someone here will help me.
What I tried :
Use pacman instead of yaourt -> gave me a full error message "opening /var/lib/pacman/sync/core/dhcpcd-5.1.3-1/depends failed : No file or directory" . I am not sure the problem is package-related since I uninstalled and reinstalled it.
Moreover when I tried pacman with -Scc and -Syy I had an error message about the core database. Then, with -Syu and --debug option, I had this:
:: Synchronizing packages data...
debug: failed to get lastupdate time for core
debug: using 'core.db.tar.gz' for download progress
debug: HTTP_PROXY: (null)
debug: http_proxy: (null)
debug: FTP_PROXY: (null)
debug: ftp_proxy: (null)
debug: connected to distrib-coffee.ipsl.jussieu.fr successfully
downloading de core.db.tar.gz...
Error: deleting core database failed
debug: returning error 16 from alpm_db_update : removing entry from database failed
Error: updating core failed (removing entry from database failed)
Any idea ? Thanx in advanceHave you already tried a different mirror?
-
ATZ returning ERROR (N95 8GB)
I'm connecting to my N95 8GB via Bluetooth from a laptop running Ubuntu Linux. I had it working fine, but for the last few days whenever I dial out, it seems that the 'ATZ' command in the chat script is returning 'ERROR' instead of 'OK'.
I just can't see any reason for it. I've disabled/re-enabled Bluetooth on both sides, rebooted the phone, rebooted the laptop, turned any connectivity-related services off/on on the phone, but still no joy.
Does anyone have any suggestions as to why 'ATZ' might return 'ERROR' on an N95?
Thanks.
RossOK, ignore that. Thinking a little clearer this morning and it looks like I had inadvertently broke my /etc/bluetooth/rfcomm.conf file at some point. I had the 'rfcomm0' port bound to Channel 1 (Hands-free Audio Gateway), instead of Channel 4 (Dial-up Networking).
Not sure how/when I broke that, but the fact that it was returning 'OK' to my 'AT' commands had me convinced I was still talking to the modem service!
Sorry for the noise,
Ross -
Function returning error text validation
Hi,
I have a page where i can insert/update user, organisation, responsible.
Organisation can be nullable.
Only one user at a time can be responsible for a organisation.
To check this responsible validation i made a function returning error text validation as follow:
BEGIN
FOR c IN (SELECT usr_spa
FROM kpi_users
WHERE usr_org_id = :p22_usr_org_id
LOOP
IF upper(:p22_usr_spa) = upper('YES') and upper(c.usr_spa) = upper('YES')
THEN
RETURN 'A user is already responsible for this organisation'||'!';
END IF;
END LOOP;
END;
The validation works fine.
But it goes wrong when i want to insert a new user, without assigning him to an organisation.
I get following message:
ORA-01722: invalid number
ERR-1024 Unable to run "function body returning text" validation.
Can someone please help me solve this problem?
ThanksHi,
try:
BEGIN
FOR c IN (SELECT usr_spa
FROM kpi_users
WHERE usr_org_id = nvl(:p22_usr_org_id,-1)
LOOP
IF upper(:p22_usr_spa) = upper('YES') and upper(c.usr_spa) = upper('YES')
THEN
RETURN 'A user is already responsible for this organisation'||'!';
END IF;
END LOOP;
END;This assumes that :p22_usr_org_id could be null and converts this to -1 (pick another default value if this may exist as an id). It is possible that the statement would otherwise be seen as WHERE usr_org_id = null which is invalid.
or you could do:
BEGIN
IF :p22_usr_org_id IS NOT NULL THEN
FOR c IN (SELECT usr_spa
FROM kpi_users
WHERE usr_org_id = :p22_usr_org_id
LOOP
IF upper(:p22_usr_spa) = upper('YES') and upper(c.usr_spa) = upper('YES')
THEN
RETURN 'A user is already responsible for this organisation'||'!';
END IF;
END LOOP;
END IF;
END;As this would stop the validation running if the :p22_usr_org_id is null.
Or, you could just make your validation conditional on p22_usr_org_id not being null?
Andy -
Function returning error - change notification
I have a function returning error text. When error occurs I get the message
'xx error has occurred' on the screen (in notification). Is there a way to control the message text so I can display different text?It's something like this:
DECLARE l_code zip.code%TYPE;
got_error varchar2(1) := 'N';
l_check_fld varchar2(30000);
l_error_fld varchar2(32000);
vErrorFields varchar2(1000);
CURSOR check_zip IS
select ''
from zip
where code = l_code;
BEGIN
apex_collection.create_or_truncate_collection('ZIP');
FOR i IN 1 .. apex_application.g_f03.COUNT LOOP
vErrorFields := '';
/* Code MUST be entered */
if (apex_application.g_f03(i) is null and
(apex_application.g_f04(i) is not null or
apex_application.g_f05(i) is not null))then
got_error := 'Y';
vErrorFields := vErrorFields || ',f03';
l_error_fld := l_error_fld || 'Row ' || to_char(i) || ':' ||' <span style="color: red">Code cannot be <strong>blank.</strong></span><br>';
end if;
END LOOP;
if got_error = 'N' then
apex_collection.delete_collection('ZIP');
end if;
RETURN l_error_fld;
END;
Maybe you are looking for
-
Importing Class to Custom Class
I'm writing my own class. (The Peacock class if you want to know.) I want to use the Tween class in my class, but I don't know how to import another class into my class. How do I go about that. Thanks.
-
I can't access "Advanced Options" in my User Account for Mac OSX
I cannot access the "Advanced Options" menu when I right click on my user account in System Preferences. When I right click, the option shows up, but nothing happens when I click on it. It does allow me to access it for other users, as I am the adm
-
Invoice Verification and valuated blocked stock
Hi, We are using movement types 107 / 109 for modeling stock in transit. And we have trouble in invoice entry processing. We perform a good receipt with movement type 107 (Valuated Blocked Stock), but no 109 (storage receipt) is performed, when enter
-
Missing namespace for XI Settings for MDM Catalog 3.0
Hi All, After having a SRM and PI server up and running, I am following the XI Settings for MDM Catalog 3.0 in the Note 1177780 https://websmp130.sap-ag.de/sap/support/notes/1177780 And I am now stuck at page 4 Interface Determination. The problem is
-
You are kidding this bug is still in Bridge CS5! Isn't the whole purpose of Bridge to pick the best images from rest by stacking them, filtering them and keywording them. It is nuts if you waste your time stacking them you can't filter them anymore!!