RD client doesnt work with win7

my freind used microsofts RD client for win8 it worked but i cant use it for win7 why? i get my pcs ip address allow remote control insert username and password still doesnt work is it only for win8 or what?

Hi,
Do you mean that you cannot remote to a PC which running Windows 7? If so, what is the edition? We can only use the Microsoft Remote Desktop client for Mac/IOS/Android to Windows 7 Professional/Enterprise/Ultimate
and Windows 8 Profession/Enterprise.
Remote Desktop Client
http://technet.microsoft.com/en-US/windowsserver/dn463762
Thanks.
Jeremy Wu
TechNet Community Support

Similar Messages

HP Security Client doesnt work with Chrome browser

Clean install, everything is latest from HP website, running 8.1, Client Security passwords work fine with Explorer but Chorme extension is seems broken

No help from HP so far. I found a way to enable the extension with regular Chrome brower however the extension is broken and does NOT work in Chrome. HP developers need to adress this issue otherwise this simple login process is useless.
In order to enable the extension you must "whitelist" it in Windows policies under Chrome.
How can I get help from HP ? Tech support said they dont deal with software issues.....

I book doesnt work with power cord only

Hello. I was just using my ibook g4 and shut it down. When i tried to turn it back on it worked for about 5 minutes then it shut off. I tried taking out the battery and holding down the power button for 5 seconds among other things. I gave up and borrowed a friends battery, he has the same model as me and that battery doesnt work either. I tried just using the power cord only and that doesnt work either. Do i need to take it in to a professional? I've tried just about everything.

Hey Caesar and Welcome to Apple Discussions,
So your header reads:
"i book doesnt work with power cord only "
Is that right? Will it run only on the battery?
If so this is from the manual:
"The computer runs with battery, but not with the power adapter plugged into
wall outlet
1. Try known-good power outlet.
2. Try known-good power adapter and power cord.
Note:
Verify that power adapter connector glows amber or green. If the power
adapter light is green, turn over the computer and press the battery button. The
battery lights should glow green and stay on if the power adapter is operating
correctly.
3. Reset the power manager by pressing the key combination Control-Option-Shiftpower.
Warning: Make sure you do not hold down the "fn" key when resetting the
power manager.
Warning: Resetting the power manager means you will also need to reset the
date and time (using the Date & Time control panel).
4. Replace DC board.
5. Replace logic board."
and it would help to know exactly which iBook you have but this is pretty generic.
Richard

Why is the fb video call doesnt work with macbook?

why is the fb video call doesnt work with macbook?

Hi
Just to correct GerdW - the vis of a polymorphic vi do not have to have the same output.
Have a look at the vis I attached. I just pass a dbl to a polymorphic vi and get a dbl in one vi and a string in the other.
The real problem is that the vi has to be set to the necessary type. If there are different inputs you just can wire them to the polymorphic vi, but this does not work with the outputs, so you have to set the type.
Hope this helps.
Thomas
Using LV8.0
Don't be afraid to rate a good answer...
Attachments:
Polymorph.zip ‏14 KB

My cc was ugraded to cc2014 and now i've 2 version adobe cc and cc2014, may i withdraw the older version? i work with win7.

My cc was ugraded to cc2014 and now i've 2 version adobe cc and cc2014, may i withdraw the older version? i work with win7.
and why when i installed adobe cc in january 2014 it installed two version 32 and 64 bits?
Thank you very much for your help?

http://blogs.adobe.com/jkost/2014/06/installing-the-2014-release-of-creative-cloud.html
This messages says (at least some) CC 2014 programs use NEW plugins https://forums.adobe.com/thread/1499663
-so do not uninstall the older CC programs if you use plugins in your programs until you are sure you have plugins that work in CC2014
If you are sure you don't need the old CC programs
-http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall
-read reply #3 about the ORDER of uninstalling & installing https://forums.adobe.com/thread/1242671

Seagate 1.5TB doesnt work with mac

hi, i have a seagate external hard drive 1.5 TB, i generally use it for my windows laptop. now i bought a mac and it doesnt work with my mac. Am i doing some thing wrong..?

Are you planning on using the drive with Windows? If no, then use Disk Utility in Applications/Utilities to reformat the drive. Formatting erases contents on a drive. Copy the data to another source before formatting.
Format the external drive as Mac OS Extended (Journaled) - Partition Map Scheme: GUID
Select Drive (top name) then click on Erase tab.
Under Format select Mac OS Extended (Journaled)
This should format as GUID when erasing but sometimes you need to click on an Advanced tab and select GUID.
If you do plan on using the drive with Windows machine, format on Windows machine as exFAT.

Time capsule doesnt work with telia bredband no wifi

Time capsule doesnt work with telia bredband no wifi. Time capsule and its wifi worked in the beginning, but now it doesnt. I have tried everything without success.

There is no question.. so if it is a statement of resignation.. then if under warranty and faulty Apple will fix it/replace it.. if not dead you will be given it back.
Are you using Lion? If so did you download 5.6 airport utility?
Plug the TC into a computer by ethernet.. hold in reset for 10sec.. and then redo the setup.
Give TC and wireless short names and no spaces and no special characters.. lock the wireless to manual a/n-b/g and fix the channels.
Then if it doesn't work most likely faulty. Otherwise it is just setup is wrong.

I want to resigne an annual engagement ? how to do ? it doesnt work with " more help"! turn turn turn turn over and over

i want to resigne an annual engagement ? how to do ? it doesnt work with " more help"! turn turn turn turn over and over

This is an open forum, not Adobe support... You need Adobe support to cancel a subscription
-start here https://forums.adobe.com/thread/1703848
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
--and two links which may provide more details, if the above links don't help you
-http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
-http://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

HT2693 hello, HP LaserJet 400 colorMFP M475dw printers smtp mail client doesnt work. Bad username or password. everything is correct. Any idea?

hello, HP LaserJet 400 colorMFP M475dw printers smtp mail client doesnt work. Bad username or password. everything is correct. Any idea?

Solved, just had to change the hostname order in /etc/hosts (I need to correct this on the arch wiki) :
Before :
127.0.0.1 localhost.localdomain localhost BodyArch-PC
::1 localhost.localdomain localhost BodyArch-PC
After :
127.0.0.1 localhost.localdomain BodyArch-PC localhost
::1 localhost.localdomain BodyArch-PC localhost

Does anyone have an example of a c++ TCP/IP client that works with labview TCP?IP server ??

I have the labview TCP/IP client/server working fine, but now I need to do this were labview is the TCP/IP server and the c++ program is the client. Does anybody have a simple C++ TCP/IP client that works with labview TCP/IP server ????

Thanks, you were right, we modified the c++ program to include the port # in the IP address and it worked.We also forgot to convert the port #. I included my labview and c++ program.
Attachments:
TCP-IP.llb ‏47 KB
client.exe ‏40 KB

Cmss 3d doesnt work with dolby digital live pack

0cmss 3d doesnt work with dolby digital li've pack4 From the page of Dobly Digital Li've pack
"Stereo content (MP3, WMA, CD audio or games) that is transformed into 5. surround sound using Creative CMSS-3D or DTS Neo:PC can also benefit from this encoding scheme that will further enhance the entertainment value of your Sound Blaster X-Fi."
with that said, i bought the pack that has both DDL and DTS Interacti've. but while playing music my reciever only gets front left and right channels. No sound comes from the center or rear channels. This is with CMSS 3D on. With analog all 5 speakers work. Before installing this pack, my reciever got PCM input from the optical line. Thus only the front channels working. now with this pack the speaker recognises that the signal is Dolby or DTS yet, only the front channels work. in short there is no difference with this pack.
could someone please explain to me how to get the whole 5. working with Dolby or DTS
thank you
Sound Blaster X-Fi Platinum, Driver 2.8.003
Windows 7 x64 Build 700

thank you for the promp reply
the problem was with the reciever. just a change in setting was all it took
but now i have anoter problem
how do i bypass dolby and dts signals from movies to my reciever
before i simply had to set spdif out as default sound device and set ac3filter to spdif passthru
now the driver panel tells me that SPDIFOut will be exclusvely be used by DTS Interactiv. it doesnt pass the signal through from Media player classic or powerdvd.
am i expected to turn off DTS Interacti've or DDL when watching a movie and needing to pass on the signal?

MSI GF4 Ti-4200 doesnt work with WindowsXP

I can't get the MSI display tools to work - it crashes,
the vbios.dll doesnt load, it also crashes.
the tv in doesnt work ,it crashes
the tv out doesnt work ,it crashes.
all the supplied software also crashes "application has encountered an error and cannot continue. sorry for any inconvenience"
the intervideo software (windvr, wincoder, winproducer) and MSI PVI software all crashes as well.
what's the deal with this stuff? ?(
I have a Dual AMD athlon Tyan thunder k7 motherboard,
MSI Ti-4200-VTD video card and MSI tv anywhere card.
is there any resolution for this?

I'm sorry gfilitti if I don't have my system listed, but I thought my question was pretty simple...
Has ANYONE been able to make the InterVideo WinProducer 2 software, that comes with the retail version of the MSI G4Ti4200-VTD64 card, work successfully under the Windows XP Home or Pro operating system?
If the answer is YES, then I will begin investigating why my system can't.
If the answer is NO, then I only ask for other people's recommendations of what software WILL work in place of that. I NEED those functions to work. That's why I paid extra for the VIVO.
All we've heard so far in this thread are NO votes. I would like to see just how widespread this is. If I can find ONE person who claims it works fine on his/her computer under Windows XP, then my NEXT question would be if they had to do anything different to make it run, or was it just a straight install? Did they add the program patch available from the MSI website? See where I'm going with this?
If you would REALLY like my system details, here ya go...
========================================
CASE - ANTEC SX1000II with 4 internal 8cm fans
POWER SUPPLY - ANTEC 400W "True Power" w/dual fans
MOTHERBOARD - MSI 645E MAX (MS-6547 Ver 2.0)
BIOS - AMI Ver 3.2 (10/21/02)
PROCESSOR - PENTIUM 4 2.0aGHz (Rev/Step 2/4(9) )
MEMORY - 1 Corsair 512MB DDR RAM (Winbond chips)
DISABLED IN CMOS - FLOPPY Controller, AUDIO Device, MODEM Device, Serial Port B, MIDI Port, and GAME Port
AGP SLOT - MSI G4Ti4200-VTD64 - IRQ 16
DRIVER: MSI 31.00
CAPTURE DRIVER - nVidia 1.08
SLOT 1 - Creative SB0090 Audigy Sound Blaster - IRQ 17
DRIVER - Creative 3.0.0.18 9/20/02
SLOT 1 - Creative SB1394 FireWire Controller - IRQ 18
DRIVER - MS 5.1.2535.0 7/1/01
SLOT 2 - NIC #1 D-Link DFE-530TX Ethernet - IRQ 18 (LAN)
DRIVER - REALTEK RTL8139 5.396.0530.2001
SLOT 3 - Adaptec 29160N Ultra160 SCSI Controller - IRQ 19
DRIVER - Adaptec 6.2.0.0 3/19/2002
SLOT 4 - EMPTY
SLOT 5 - MSI SYSTEM D-Bracket
SLOT 6 - NIC #2 NetGear FA312 Ethernet - IRQ 18
DRIVER - Windows XP Pro native driver
NOTE:
NIC #1 is for home LAN
NIC #2 is for Alcatel SpeedTouch External DSL modem
SCSI DRIVES:
ID 0 - COMPAQ (Seagate) ST318451LW, 18GB, 15K RPM
ID 1 - QUANTUM Typhoon Atlas II, 18GB, 10K RPM
ID 2 - Seagate ST39103LW, 9G, 10K RPM
ID 3 - Plextor CD-RW PX-W1219S
ID 4 - Toshiba DVD-ROM SD-M1201
ID 5 - EPSON Perfection 1640SU Flatbed Scanner
ATA/ATAPI DRIVES:
Primary Master - No Connection
Primary Slave - No Connection
Secondary Master - MATSHITA LS-120 Ver F523
Secondary Slave - No Connection
USB DEVICES:
DIAMOND SupraMAX 56K V.92 Model:SUP2920
Generic Flash Memory programmer and other assorted USB devices on occasion.
MONITOR - HITACHI SuperScan Pro 21 w/5-BNC input
========================================
BTW, I would think when investigating a program's FLAT refusal to run, that the MOST important things aren't listed in these signature files. It has to do with what ELSE is running at the same time. Which services are running and which are NOT? What memory resident programs are loaded at boot-up? Any service packs installed? How about any security patches from Microsoft? Which anti-virus software (if any)? Which DirectX version? Personal firewall? Etc., etc.
Granted, the hardware DOES have a factor, but I feel all of these are MORE important factors than the speed or brand of a persons hardware. I look at the signitures more as bragging rights than anything else.
Now, this is just my opinion and may not reflect the feelings of the more sane people around me.
Cheers!

Outlook (former Hotmail) Forum says I need to get a "Mail Client" that works with 10.4.11

Hello Apple Friends:
I have a PowerBook G4 still running Tiger 10.4.11.
Unfortunately, due to virus concerns and spam at work, I have had to use non-apple mail such as Hotmail for well over a decade now. Not a problem! Mac works fine. But the folks over in the "Microsoft" (delete that word after reading it) group felt their Hotmail was too old fashioned and jazzed it up and are calling it Outlook now.
And Hotmail/new Outlook no longer works like it did before on the Tiger OSX of course!
After over a month and reading dozens of Emails (about 20 which I sent myself) to various Forums and help groups, the latest "advice" is that I go searching for an "old style" "Mail client" whatever that is.... that will work with Tiger 10.4.11. And install and transfer it somehow, hopefully without losing or deleting 17 years of contacts and Email, transfer over to using it for my Outlook (I looked at some others who have the great modern Mountain Lion etc OSX systems and read their posts about this and they had significant problems using the new Outlook too.
Problem is, I deal with many very stubborn people who are just not going to spend the time and effort needed to "convert" my "hotmail" address into anything new to replace it, not even counting how many weeks of effort, missed emails messed up communications this will entail and last far into 2014 I'm sure.
The best hope is that someone knows of a "Legacy" site with older mail clients on it (or even older browsers than my Safari 4.1.3 in case someone thinks that is the problem (I also tried it with Firefox, but only can have up to 3.6.28 and TenFoxFour is not highly recommended as it creates unstable computers occassionally)
So I'm caught in the middle trying to upgrade older Mac and without the funds needed to purchase one that has Intel Chip in it for use with something higher than Leopard so I can use the Hotmail/Outlook again.
Sorry for long message, but I wanted to cover all the bases in case someone is searching the data base of the Forum in later months, and hopefully someone else here has has similiar total frustration with trying to continue using the "M--------" free Email product.
While I'm on the topic, I wondered if the .Mac was an Email client?   I had it once but long ago subscrption elapsed and got notice that it became "mobile me" or something like that....just covering all the bases since Apple has so many more choices.
Thanks for reading all of this complicated (you should only see the other Emails!) question. (sorry products and username are wrong for this message can't get the hang of editing them "before" I think of writing the message!).

Hi BDAqua:
Just catching up to your earlier suggestions so hope this is not taken as anything less than the excellent advice and fantastic support you have given me here..
I cannot use the current edition of Sea Monkey 2.17.1 as System Requirements are : 10.6 Minimum, and I have Tiger 10.4.11 max in "non-Intel" G4
Note also that reading details (I always do) I cannot just jump to that one if I could or wanted to as too old a Sea Monkey at 1.1.19. They say to upgrade to 2.0 first, then reset the "profile" page (does anyone remember my password or even what Email I used back in 2004??) before moving on to upgrade (use it at least once in new profile of course!)
So I copied them first here for anyone else's information:
System Requirements, Installation and Uninstallation
Before installing, make sure your computer meets the system requirements. SeaMonkey 2.17.1 will no longer offer to migrate your data from SeaMonkey 1.x or Mozilla 1.x at the first start after installation (bug 689437). In order to upgrade from such an old version, install the last SeaMonkey 2.0 release first, do the one-time profile upgrade, uninstall SeaMonkey 2.0 and then install your target release (e.g. this one).
You can find more details about installation, profile data and uninstallation in our install and uninstall document.
Here are the specifics of Minimum Requirements of Sea Monkey 2.17.1 version:
Mac
Operating Systems
Mac OS X 10.6 or higher
Minimum Hardware
Macintosh computer with an Intel processor
200 MB of free hard drive space
Older System Sea monkey 2.0 requirements are ::
Mac
Operating Systems
Mac OS X "Tiger" (10.4)
Mac OS X "Leopard" (10.5)
Mac OS X "Snow Leopard" (10.6)
Minimum Hardware
Macintosh computer with an Intel x86 or PowerPC G3, G4, or G5 processor
256 MB RAM
200 MB of free hard drive space
But..... Caution signs are EVERYWHERE not to download or use this anymore.....
(I know my 1.1.19 is really old but so old no one bothers with it anymore?? but newer ones may have huge security loophole for viruses etc....
Sea Monkey 2.0.14 Warns:
Released April 28, 2011
WARNING! The SeaMonkey version available for download from this page is outdated and suffers from known security vulnerabilities. This page is only available for historic reference.
We strongly advise you to download the current release instead.
So I'm sorry if I could not follow your instructions and get a better Sea Monkey Experience as well..... I'm just using existing one as another browser in addition to the newer ones provided as I use them for different purposes, i.e. Sea Monkey can be great for just interrupted "look ups" on google, etc of a quick definition and then closing it, so nothing complicated, no Java/Adobe Flash ads requirements, etc in and out that's all.
Then I can leave my major browsing and using Email Hotmail/Outllook which prompted this whole exploration of solutions for the two brand new browsers TenFourFox and OmniWeb..
Thanks again to everyone! I replied to everyone below in addition to this reply above to BDAqua....

ITunes doesnt work with my iPod!!! Help please!

ok...i have tried to plug my iPod into my computer lately, and iTunes doesnt recongnize that my iPod is plugged in!!! i have pretty much de-bugged the problem...its not any of my USB ports b/c other hardware (digital camera etc...) work in them...and its not the computer...but it could possibly be iTunes. if i delete and re-install my iTunes software do i loose all my songs? and w/out loosing all my songs etc is there anything i can do to fix this?
i have also tried resetting my iPod multiple times, but that doesnt work so...the only other thing i can think that could have happened is: i got an iHome a few months ago, and ever since that i have had the problem...so that could have messed something up...can u help?

Does the text on your iPod show up grey in iTunes? Grey text when you look at the content and lock symbol at the bottom of the screen simply shows that your iPod is set to "automatically update songs and playlists". . If you want to access your iPod directly, play it through your iTunes, connect it to a second computer etc. you just need to change the update method to "Manually manage songs and Playlists" in the iPod preferences. For more detail see this tutorial: Managing Your Songs Manually
One thing to be aware of with manually updating is that the iPod also has to be manually ejected before the "Do Not Disconnect" message will go away. Safely disconnect iPod
For info: iPod 101
The iPod offers three ways to transfer music from your computer. You can select one of the following update modes from the iPod Preferences menu in iTunes (Edit=>Preferences=>'iPod' tab):
1) Automatically update all songs and playlists. This is the default mode, in which your entire music library, including playlists, is automatically synced to your iPod. If the music library on your computer exceeds the iPod storage capacity, you are prompted to select a different update method.
2) Automatically update selected playlists only. With this option, iTunes automatically copies the playlists you have selected to the iPod when you connect it to the computer.
3) Manually manage songs and playlists. You can also choose to transfer music to the iPod manually. This allows you to drag and drop individual songs and playlists from iTunes to the iPod.

Logitech Cordless Optical Mouse doesnt work with mac os x 10.4.5?

I just bought a Logitech® Cordless Optical Mouse in japan to use with my powerbook running os x 10.4.5...the mouse doesnt seem to work with the native bluetooth system. so I plugged in the supplied reciever and could get the mouse to move the cursor, but only that. buttons dont work. I down loaded some kind of device manager from the logitech web site but just as the apple bluetooth manager it does not "discover" the mouse.
I noticed that the system requirements for the logitech device manager is osx 10.3 - 10.4.2 so im wondering if my system is to new for this product.
all this i found out after i bought the mouse, and it is a little irritating...it said it was mac compatible on the box...
should I be waiting for an update from logitech or apple concerning this problem.
or is there an easy fix/ anyone else have this problem?
thanks
©

Hi, © ! — or do you prefer Ulfur?
What model? "A Logitech® Cordless Optical Mouse" covers a lot of territory. For example, I have a CordlessOptical11 mouse that's several years old — and IrDA, not Bluetooth. This Logitech page contains a chart defining the name and "device model string" for each product, based on the M/N stamped into the bottom of your mouse. Better safe than sorry: Logitech's support — particularly for Mac folk — can be somewhat challenging. [1]
From there, you might try to confirm that you have the correct driver from Logitech's Support »» Downloads »» Mice page —
— but, Oops! — unfortunately, it may only link to Windows-compatible drivers.
Logitech has used their own patented RF technology for years — and some of their "Bluetooth" products "may not" actually provide Bluetooth functionality in Macs. (OK, that was tongue-in-cheek: I really mean "do not.") The mice usually work, though.
AFAIK, Logitech Control Center 1.6.2 is their latest driver for USB mice. (They have other mouse drivers, too.)
However, as this page explains, their V270 Bluetooth mouse supposedly doesn't require a driver separate from what's provided by Apple.
You may want to search this forum for differing views on this. Also, go to this Logitech user forums page and click to select the Macintosh forum. I won't deny you the (dis-?)pleasure of reading about others' experiences...
[1] Sorry, I don't mean to be as discouraging as I've probably made things sound. Most Mac folks have actually had pretty good experience with Logitech USB and Bluetooth mice — but Logitech Support's attitude toward Mac users could be improved. Please check things to confirm what's what — then post back, and I — or someone else who's using an MX900 or MX1000 or V270 or whatever Logitech mouse — will try to help further.
Looking forward to hearing back from you,
Sincerely,
Dean
[2] The links I've provided all work within Logitech's US website (I just tested). If appropriate, you may want to start fresh from the Logitech home page and find comparable international pages.
[2,059 ⊥ 3,455]

RD client doesnt work with win7

Similar Messages

Maybe you are looking for