RD Connection Broker Fails to install on Windows 2012 R2, fresh install
I have been fighting this for a week
Trying to install RD connection broker service on a Server 2012 R2. I've had multiple errors, ranging from the "Server pending reboot" issue, to the install just hanging for 15-20 minutes and then failing. This is NOT on a DC, and I've
tried it on a fresh 2012 R2 server, and a fully updated Server 2012 R2. It has to be something on the domain I'm joined too, as I can install it with no problem on test servers/domains at my office.
Hi CitadelTCS,
Some folk meet this issue because the server is DC, in your case could you try to run SFC /SCANNOW then monitor this issue again.
The related KB:
Use the System File Checker tool to repair missing or corrupted system files
https://support.microsoft.com/en-us/kb/929833?wa=wsignin1.0
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Similar Messages
-
2011 MacBook Pro, 64 bit i7 quad core, upgraded to Lion OSx, Bootcamp installed with Windows 7, wanting to install Windows 8 (don't ask), tried downloading/installing bootcamp 5.0.5033 (both on the mac/windows partitions (actually using a parallel to run Windows)), error message something similar to bootcamp doesn't support this Windows
So the question is am I doing something wrong? Should I just try and install windows 8 through my windows 7 partition and see if I can use the bootcamp 5.05033. Or do I solely have to use the bootcamp to install Windows 8? I'm not too familiar with bootcamp and how it runs.if you're using parallels and full bootcamp then you're making it 100% more troublesome for youself then it needs to be
bootcamp is running windows directly on the hardware this give full memory and cpu and 3d video game power
running windows in parallels is running a virtual machine where one can't run powerful games and the like but one can have it in a window and change fast between osx and windows
parallels as the only virutal machine (as far as I know) support not have the operating system as a file on the osx harddisk but can access a bootcamp parition as virtual machine but without the benefits bootcamps provides
it's a service parallels provide for those who want both to play games in normal bootcamp and sometimes use windows in a virutal machine
just install it like a normal virtual machine and you need not worry about bootcamp drivers and the likes
plus it would mean that the windows part would be a part of the timemachine bacup of osx
which it is not when it's in bootcamp -
RD Connection broker failed to initialize
We have an RD farm with two session hosts and a gateway that has been working. It has been in use for several months and I don't think anything was changed. I was informed that it stopped working and I do see evidence of this. I've been troubleshooting and
see that the hosts both left the farm last week with this error message:
Log Name: Microsoft-Windows-TerminalServices-SessionBroker-Client/Operational
Source: Microsoft-Windows-TerminalServices-SessionBroker-Client
Date: 7/19/2013 3:06:42 PM
Event ID: 1283
Task Category: Connection Broker Client terminate
Level: Information
Keywords:
User: NETWORK SERVICE
Computer: server08.domain.com
Description:
Remote Desktop Services successfully left a farm on the Connection Broker server gate.domain.com.
Since then whenever someone connects we get three events in a row in the same log:
Event ID: 1301
Task Category: RD Connection Broker Client processes request from a user
User: NETWORK SERVICE
Computer: server08.domain.com
Description:
Remote Desktop Connection Broker Client received request for redirection.
User : DOMAIN\ddawson
RDP Client Version : 5
Event ID: 1296
Task Category: RD Connection Broker Client processes request from a user
Computer: server08.domain.com
Description:
Remote Desktop Connection Broker Client failed while getting redirection packet from Connection Broker.
User : DOMAIN\ddawson
HRESULT = 0x88150002
Event ID: 1306
Task Category: RD Connection Broker Client processes request from a user
Computer: server08.domain.com
Description:
Remote Desktop Connection Broker Client failed to redirect the user DOMAIN\ddawson.
HRESULT = 0x88150002
I'm not sure which direction to go. I've confirmed that the session hosts are both in local group "Session Broker Computers" on our Session Broker. On each host I've removed them from the farm and put them back in. When I do that I get the error:
Event ID: 1284
Task Category: Connection Broker Client start up
Computer: server08.domain.com
Description:
Remote Desktop Connection Broker Client failed to initialize while joining the Connection Broker on server gate.domain.com.
HRESULT = 0x80070534
I've read the articles telling me to test connectivity. These computers are all on the same physical network and I can RDP and PING back and forth between them all. What can I try next?Hi,
Please check if this article could help.
Event ID 1284 — RD Connection Broker Communication
http://technet.microsoft.com/en-us/library/ee890933(v=ws.10).aspx
Thanks.
Best Regards
Jeremy Wu -
Network Connectivity Assistant failed to start on windows 8.1
Our Windows 2012 server running direct access is working fine with the windows 7 computers that we use.
I am now coming to role out windows 8.1, when I assign the computers to the relevant groups to get the group policies it doesn't want to connect.
When I run get-daconnectionstatus nothing
then when I try and start the network connectivity assistant it fails as well telling me it cannot start?Hi,
It seems to be a Windows 8.1 side issue, please re-post the question in our Windows 8.1 forum for assistance.
http://social.technet.microsoft.com/Forums/windows/en-US/home?forum=w8itpronetworking
Thanks.
Jeremy Wu
TechNet Community Support -
Windows 8.1 Professional x64: Windows will not run Windows Update after fresh install
Greetings everyone. I'm having a strange issue that I can't seem to figure out. I'm developing an image with the following specs:
Hardware:
Dell XPS 12 Ultrabook Convertible
Haswell i7
8 GB RAM
256 SSD HD
Software:
Windows 8.1 Professional x64
Problem description:
After formatting and partitioning the hard drive (UEFI) with a corporate copy of Windows 8.1 x64, the laptop is booted up in Audit mode. No OEM drivers or software is installed. Windows is then activated to the KMS server and verified.
I then connect to a hotspot (no proxy required) and open up IE 11. I click tools and select Windows Update. The laptop then searches and searches for updates and never finds any. I've let it search for over 10 hours. The laptop never
returns an error message.
Troubleshooting performed:
1. I've tried different copies of Windows 8.1 - same result.
2. I've tried installing the OS with different types of media (external hd and multiple bootable USB drives) - same result.
3. I've disable the Windows Update service, deleted the contents of the SoftwareDistribution folder, restarted the Windows Update service and rebooted laptop - same result
4. I've installed this copy of Windows 8.1 on different models of laptops with no OEM drivers or software installed - same result.
5. I've installed all of the OEM device drivers in the correct order and ensured that the device manager is clear of bang signs - same result.
6. Date and time is set correctly.
Has anyone else experienced this with Windows 8.1 x64? If I take a copy of Windows 7 x64 or 8 x64 and install it on this laptop, it updates Windows without any issues. The problem seems to be with Windows 8.1.
Thank you in advance for any help you can provide.2014-03-04 13:49:52:826
888 9f8
Misc =========== Logging initialized (build: 7.9.9600.16403, tz: -0800) ===========
2014-03-04 13:49:52:826
888 9f8
Misc = Process: C:\Windows\system32\svchost.exe
2014-03-04 13:49:52:826
888 9f8
Misc = Module: c:\windows\system32\wuaueng.dll
2014-03-04 13:49:52:826
888 9f8
Service *************
2014-03-04 13:49:52:826
888 9f8
Service ** START ** Service: Service startup
2014-03-04 13:49:52:826
888 9f8
Service *********
2014-03-04 13:49:52:842
888 9f8
Agent * WU client version 7.9.9600.16403
2014-03-04 13:49:52:842
888 9f8
Agent * Base directory: C:\Windows\SoftwareDistribution
2014-03-04 13:49:52:842
888 9f8
Agent * Access type: No proxy
2014-03-04 13:49:52:842
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 5.
2014-03-04 13:49:52:842
888 9f8
Service UpdateNetworkState Ipv4, cNetworkInterfaces = 1.
2014-03-04 13:49:52:842
888 9f8
Agent * Network state: Connected
2014-03-04 13:49:52:858
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 5.
2014-03-04 13:49:52:858
888 9f8
Service UpdateNetworkState Ipv4, cNetworkInterfaces = 1.
2014-03-04 13:49:53:045
888 9f8
DtaStor Default service for AU is {00000000-0000-0000-0000-000000000000}
2014-03-04 13:49:53:045
888 9f8
DtaStor Default service for AU is {9482F4B4-E343-43B6-B170-9A65BC822C77}
2014-03-04 13:49:53:045
888 9f8
DtaStor Data store successfully created
2014-03-04 13:49:53:061
888 9f8
Agent *********** Agent: Initializing global settings cache ***********
2014-03-04 13:49:53:061
888 9f8
Agent * Endpoint Provider: 00000000-0000-0000-0000-000000000000
2014-03-04 13:49:53:061
888 9f8
Agent * WSUS server: <NULL>
2014-03-04 13:49:53:061
888 9f8
Agent * WSUS status server: <NULL>
2014-03-04 13:49:53:061
888 9f8
Agent * Target group: (Unassigned Computers)
2014-03-04 13:49:53:061
888 9f8
Agent * Windows Update access disabled: No
2014-03-04 13:49:53:076
888 9f8
WuTask WuTaskManager delay initialize completed successfully..
2014-03-04 13:49:53:076
888 9f8
Report CWERReporter::Init succeeded
2014-03-04 13:49:53:076
888 9f8
Agent *********** Agent: Initializing Windows Update Agent ***********
2014-03-04 13:49:53:076
888 9f8
DnldMgr Download manager restoring 0 downloads
2014-03-04 13:49:53:092
888 9f8
AU ########### AU: Initializing Automatic Updates ###########
2014-03-04 13:49:53:092
888 9f8
AU AIR Mode is enabled
2014-03-04 13:49:53:092
888 9f8
AU # AU is not configured yet
2014-03-04 13:49:53:092
888 9f8
AU # Will interact with non-admins (Non-admins are elevated (User preference))
2014-03-04 13:49:53:092
888 9f8
AU # Accelerated install is required
2014-03-04 13:49:53:092
888 9f8
Agent Switching to hardware-verified ClientId.
2014-03-04 13:49:53:092
888 9f8
AU WARNING: Failed to get Wu Exemption info from NLM, assuming not exempt, error = 0x80070490
2014-03-04 13:49:53:108
888 9f8
AU AU finished delayed initialization
2014-03-04 13:49:53:108
888 8c4
IdleTmr Incremented idle timer priority operation counter to 1
2014-03-04 13:49:53:108
888 13c
DnldMgr Asking handlers to reconcile their sandboxes
2014-03-04 13:49:57:239
888 af8
AU ########### AU: Setting new AU options ###########
2014-03-04 13:49:57:239
888 af8
AU Setting AU Approval Type to 4
2014-03-04 13:49:57:239
888 af8
AU # Policy changed, AU refresh required = Yes
2014-03-04 13:49:57:239
888 af8
AU # Approval type: Scheduled (User preference)
2014-03-04 13:49:57:239
888 af8
AU # Auto-install minor updates: Yes (User preference)
2014-03-04 13:49:57:239
888 af8
AU # Will interact with non-admins (Non-admins are elevated (User preference))
2014-03-04 13:49:57:239
888 af8
AU # Accelerated install is required
2014-03-04 13:49:57:239
888 af8
AU AU Refresh required....
2014-03-04 13:49:57:239
888 af8
AU AU setting next detection timeout to 2014-03-04 21:49:57
2014-03-04 13:49:57:239
888 af8
AU AIR Mode is enabled
2014-03-04 13:49:57:239
888 af8
AU AIR Mode is disabled
2014-03-04 13:49:57:239
888 af8
AU Accelerate Install required state reset
2014-03-04 13:49:57:239
888 af8
AU Triggering Online detection (interactive)
2014-03-04 13:49:57:239
888 9f8
AU Windows OOBE is still in progress. AU deferring detection
2014-03-04 13:49:57:239
888 9f8
AU WARNING: BeginDetection failed, hr:0x8024a008
2014-03-04 13:49:57:239
888 9f8
AU All AU searches complete.
2014-03-04 13:49:57:239
888 9f8
AU # WARNING: Failed to find updates with error code 8024a008
2014-03-04 13:49:57:239
888 9f8
AU AU setting next detection timeout to 2014-03-04 22:19:57
2014-03-04 13:49:57:239
888 9f8
AU OOBE is in progress, so cannot perform Accelerated Install
2014-03-04 13:53:34:838
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 4.
2014-03-04 13:53:34:838
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 3.
2014-03-04 13:54:16:402
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 4.
2014-03-04 13:54:16:417
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 5.
2014-03-04 13:58:48:942
888 6d4
IdleTmr Decremented idle timer priority operation counter to 0
2014-03-04 13:58:56:990
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 3.
2014-03-04 13:58:57:022
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 4.
2014-03-04 13:58:57:272
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 5.
2014-03-04 13:58:58:830
888 9f8
Service UpdateNetworkState Ipv4, cNetworkInterfaces = 2.
2014-03-04 13:58:58:846
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 4.
2014-03-04 13:58:58:877
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 3.
2014-03-04 13:58:58:892
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 4.
2014-03-04 13:58:59:267
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 5.
2014-03-04 13:59:01:937
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 4.
2014-03-04 13:59:01:937
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 3.
2014-03-04 13:59:01:953
888 9f8
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 4.
2014-03-04 14:08:49:957
888 9f8
AU ########### AU: Uninitializing Automatic Updates ###########
2014-03-04 14:08:50:007
888 9f8
WuTask Uninit WU Task Manager
2014-03-04 14:08:50:219
888 9f8
Service *********
2014-03-04 14:08:50:219
888 9f8
Service ** END ** Service: Service exit [Exit code = 0x240001]
2014-03-04 14:08:50:219
888 9f8
Service *************
2014-03-04 14:13:11:111
888 ba4
Misc =========== Logging initialized (build: 7.9.9600.16403, tz: -0800) ===========
2014-03-04 14:13:11:111
888 ba4
Misc = Process: C:\Windows\system32\svchost.exe
2014-03-04 14:13:11:111
888 ba4
Misc = Module: c:\windows\system32\wuaueng.dll
2014-03-04 14:13:11:111
888 ba4
Service *************
2014-03-04 14:13:11:111
888 ba4
Service ** START ** Service: Service startup
2014-03-04 14:13:11:111
888 ba4
Service *********
2014-03-04 14:13:11:126
888 ba4
Agent * WU client version 7.9.9600.16403
2014-03-04 14:13:11:126
888 ba4
Agent * Base directory: C:\Windows\SoftwareDistribution
2014-03-04 14:13:11:126
888 ba4
Agent * Access type: No proxy
2014-03-04 14:13:11:126
888 ba4
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 5.
2014-03-04 14:13:11:126
888 ba4
Service UpdateNetworkState Ipv4, cNetworkInterfaces = 1.
2014-03-04 14:13:11:126
888 ba4
Agent * Network state: Connected
2014-03-04 14:13:11:126
888 ba4
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 5.
2014-03-04 14:13:11:126
888 ba4
Service UpdateNetworkState Ipv4, cNetworkInterfaces = 1.
2014-03-04 14:13:11:142
888 ba4
Agent *********** Agent: Initializing global settings cache ***********
2014-03-04 14:13:11:142
888 ba4
Agent * Endpoint Provider: 00000000-0000-0000-0000-000000000000
2014-03-04 14:13:11:142
888 ba4
Agent * WSUS server: <NULL>
2014-03-04 14:13:11:142
888 ba4
Agent * WSUS status server: <NULL>
2014-03-04 14:13:11:142
888 ba4
Agent * Target group: (Unassigned Computers)
2014-03-04 14:13:11:142
888 ba4
Agent * Windows Update access disabled: No
2014-03-04 14:13:11:142
888 ba4
WuTask WuTaskManager delay initialize completed successfully..
2014-03-04 14:13:11:142
888 ba4
Report CWERReporter::Init succeeded
2014-03-04 14:13:11:142
888 ba4
Agent *********** Agent: Initializing Windows Update Agent ***********
2014-03-04 14:13:11:142
888 ba4
DnldMgr Download manager restoring 0 downloads
2014-03-04 14:13:11:142
888 ba4
AU ########### AU: Initializing Automatic Updates ###########
2014-03-04 14:13:11:142
888 ba4
AU AIR Mode is disabled
2014-03-04 14:13:11:142
888 ba4
AU # Approval type: Scheduled (User preference)
2014-03-04 14:13:11:142
888 ba4
AU # Auto-install minor updates: Yes (User preference)
2014-03-04 14:13:11:142
888 ba4
AU # Will interact with non-admins (Non-admins are elevated (User preference))
2014-03-04 14:13:11:142
888 ba4
Agent Switching to hardware-verified ClientId.
2014-03-04 14:13:11:142
888 ba4
AU WARNING: Failed to get Wu Exemption info from NLM, assuming not exempt, error = 0x80070490
2014-03-04 14:13:11:158
888 ba4
AU AU finished delayed initialization
2014-03-04 14:13:11:158
888 ba4
AU OOBE is in progress, so cannot perform Accelerated Install
2014-03-04 14:13:11:158
888 764
IdleTmr Incremented idle timer priority operation counter to 1
2014-03-04 14:13:11:158
888 10c
DnldMgr Asking handlers to reconcile their sandboxes
2014-03-04 14:13:13:353
888 764
AU Triggering AU detection through DetectNow API
2014-03-04 14:13:13:353
888 764
AU Triggering Online detection (interactive)
2014-03-04 14:13:13:353
888 ba4
AU Windows OOBE is still in progress. AU deferring detection
2014-03-04 14:13:13:353
888 ba4
AU WARNING: BeginDetection failed, hr:0x8024a008
2014-03-04 14:13:13:353
888 ba4
AU All AU searches complete.
2014-03-04 14:13:13:353
888 ba4
AU # WARNING: Failed to find updates with error code 8024a008
2014-03-04 14:13:13:353
888 ba4
AU AU setting next detection timeout to 2014-03-04 22:43:13
2014-03-04 14:13:13:353
888 ba4
AU OOBE is in progress, so cannot perform Accelerated Install
2014-03-04 14:43:13:405
888 ba4
AU Windows OOBE is still in progress. AU deferring detection
2014-03-04 14:43:13:405
888 ba4
AU WARNING: BeginDetection failed, hr:0x8024a008
2014-03-04 14:43:13:405
888 ba4
AU All AU searches complete.
2014-03-04 14:43:13:405
888 ba4
AU # WARNING: Failed to find updates with error code 8024a008
2014-03-04 14:43:13:405
888 ba4
AU AU setting next detection timeout to 2014-03-04 23:13:13
2014-03-04 14:43:13:405
888 ba4
AU OOBE is in progress, so cannot perform Accelerated Install
2014-03-04 14:47:37:066
888 764
IdleTmr Decremented idle timer priority operation counter to 0 -
How do I add my Custom Workflow Activity to FIM 2010 R2 SP1 installed on Windows 2012 server?
Hellos.
I have tried and failed to add my custom.dll into the Windows Server 2012 GAC.
We have a version of FIM 2010 R2 Sp1 running on Windows Server 2008 R2 and that was no problem. There seemed to be a gacutil.exe present on the system which added my assembly.
I cannot find gacutil.exe on the Windows 2012 Server.
I have downloaded and installed Windows SDK for Windows 8. However, when I try the gacutil.exe /i <myCustom.dll> nothing seems to happen.
Are there any guidelines how to add custom workflow activities to FIM when installed on a Windows Server 2012 system?
TIA
*HHWell yes. It is fine when FIM is hosted on Windows Server 2008 R2.My difficulty is that I am using FIM 2010 R2 Sp1 and Windows Server 2012. No GACutility executable.
However, the problem has been resolved. Powershell can be used to modify the assemblies.
I opened a RunAs Administrator PS session. My assembly is in folder c:\Temp
Using Windows Explorer I browsed the folder c:\windows\assembly and noted the System.EnterpriseServices entries: version (2.0.0.0) and public key token (b03f5f7f11d50a3a)
(My version is 2.0.0.0 because when installing FIM and SharePoint 2013 the instructions I used suggested setting .Net version to be 2.0)
These powershell commands got me going...
PS C:\temp> [System.Reflection.Assembly]::Load("System.EnterpriseServices, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a")
GAC Version Location
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_64\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50...
PS C:\temp> $publish = New-Object System.EnterpriseServices.Internal.Publish
PS C:\temp> $publish.GacInstall("c:\temp\RunPowershellLibrary.dll")
PS C:\temp>
PS C:\temp>
PS C:\temp> iisreset
Amazingly I can see the assembly RunPowershellLibrary in my Windows 2012 GAC. :-)
Also, what is more cheering is that the custom activity actually works with FIM 2010 R2 Sp1. -
Iphone 3GS 3.1.2 not seen by itunes on windows 7 32bit fresh install
I have no idea why on a fresh install my iphone wont sync with itunes. I'm not sure where to begin in trying to diag this...
Below is the output from itunes' diag run:
Microsoft Windows 7 Business Edition (Build 7600)
Dell Inc. Latitude D620
iTunes 9.0.3.15
QuickTime 7.6.5
FairPlay 1.6.16
Apple Application Support 1.1.0
iPod Updater Library 9.0d11
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.6.0.32
Apple Mobile Device Driver 1.45.0.0
Bonjour 1.0.6.2 (118.5)
iTunes Serial Number D3103B4D2DEED95E
Current user is not an administrator.
The current local date and time is 2010-03-21 23:24:44.
iTunes is not running in safe mode.
Video Display Information
NVIDIA, NVIDIA Quadro NVS 110M
** External Plug-ins Information **
No external plug-ins installed.
** iPod/iPhone Connectivity Tests **
iPodService 9.0.3.15 is currently running.
iTunesHelper 9.0.3.15 is currently running.
Apple Mobile Device service 2.50.39.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
** iPhone/iPod Touch Sync Tests **
No iPhone or iPod found.I'm on a dell d620 laptop, about 5 or so years old or more. I was on XP and things worked fine until I some random windows update from the auto-updater installed and I had issues. Thinking this would not happen on Win7 and wanting to upgrade anyway I went to Win7 and I still have the same issue, except I dont: now Itunes doesn't stall it just doesn't see the iphone and try to synch. It would stall at synching. I read somewhere to delete podcasts which I did which I think worked itunes doesn't see the phone. Windows does and I can see and transfer photos and movies but no itunes syncing.
thanks guys for the help,
alex -
Blue Screen with installing new Windows on already pre-installed one
Hello everyone, I am sorry if that topic has already been dealt with, and if I am asking about the same thing. I found a few posts relating to my problem, but it did not fully help, so...
I bought a M70 in Germany, it has Win XP HE already installed, but I wanted to install my Windows with a different language. When I boot the computer from the disk, there is first this blue screen saying that it is loading many drivers, etc. Then, it suddenly stops when it finishes loading all the stuff. There is only a cursor in the upper left corner (the one in DOS operating mode) and nothing happens. What could be a problem?
Is there some kind of blockade on the hard disk preventing me from formatting the partition and installing a different system? My own windows does not include SP2 on the cd, usually I install it later on.
I saw at least one similar post, someone suggested browsing the download section on the website to find some information, but I failed in doing that. Can someone help me? I would be extremely grateful for any information!
mikeHi guys, unfortunately, I am still in Germany, and I have limited access to any windows software. I can use a Win XP SP2 install cd only when I go home next month, so right now I am trying whatever else I can. I thought of installing the Windows from the recovery cd on another partition, but it stubbornly wants to do it on the main one, wanting to completely remove everything from the main partition. At least, then I could format the C partition using Windows installed on another partition, but it does not work anyway. I guess I have no other choice but to wait until I have access to a cd with Win XP SP2 on it. I really hope that is the cause of the problem. I will try to get any other copy of Win just to try it out, and I will keep you guys informed. If you have any other ideas, share them with me, please.
Regards, Mike. -
Install SSAS unattented Install on Windows 2012 Core edition
Dear People who can help.
We are trying to offer SSAS as a Self Service solution in our company. this without giving the user SYSADMIN rights.
When we install this in a vmware environment or on a brick it does not start up SSAS. When we install it on a server with a gui it just work. Does any one know how to solve this problem in Windows 2012 Core edition without a gui?
Thanks in advance,
MichaelHi Michael,
According to your description, when you install the SSAS without GUI, it doesn't start up SSAS. Right?
When we install SQL Server via command line, we have the many installation parameters for Analysis Services. There's one parameter "/ASSVCSTARTUPTYPE" which specifies the startup mode for the Analysis Services service. You
should set it Automatic when do the unattended installation. Also you can start the SQL Server Analysis Services service manually via command line:
net start "SQL Server Analysis Services (MSSQLSERVER)"
Reference:
Install SQL Server 2014 from the Command Prompt
Tips ‘N’ Tricks – Windows – Starting, Stopping, and Restarting Services from Command Line
If you have any question, please feel free to ask.
Regards,
Simon Hou
TechNet Community Support -
Can't Install my SATA drive on fresh install of XP.
Ok, Im gonna post all the details because I have also tried some things peeps suggested and they have not worked so I think maybe I have a different problem.
First, im trying to install Windows XP in a new system on a WD raptor 74 GB. I know the power supply is hooked up right(using the SATA power connector) and I have the SATA cable connected to the VIA controller(SER1). In bios, I have the SATA controller under PCI periphirals(the one peeps say is the PROMISE controller) disabled and I have the VIA PATA and SATA enabled. When I go into windows XP setup, I press f6, it brings up the install SATA/RAID or whatever portion. I press S and add the VIA SATA raid controller for WinXP off of the VIA disk and press enter to install. It goes through a bunch of loading stuff and then goes to the winXP install screen. I press enter to install XP but it says there is no hard disk installed. Please help, really aggravating me now :(. Thanks in advance!Quote
Originally posted by Cozman
hmmmmm as far as i know u still have to enter the via sata bios to tell it it has a single drive .. or it wont be seen by the windows driver during the install process ... although ur not createing a raid array .. u do need the sata bios to know it has a drive connected by creating an array ... thats what ive found through experience although i could be wrong in this case .. im no expert
Just to info !!
I have install Win2Kpro_SP4 + WinXP_SP1 on a SATA Disk Seagate 160GB
1. Connet the driv to SATA1 on the Via controller then but a Bootable Windows CDROM in Set Bios to Boot on CDROM then Setup will start, then press F6 load Via Raid SATA driver first option if the win is WinXP then it will setup files then press F8 then it will Exsaming the Disk get to the Partions screen then select to install on the partion (EG 160GB) then windows will promt you to Format the Drive. (on Via it takes my system 3sek to format the disk !!) then it will go on installing Windows. Done.!
Regards.
Microsoft Certified Professional (70-215 + 70-217) -
I did not deactivate a photoshop cs6 before there was a new "C" hard drive installed on my computer and a Win7 Pro fresh install too. How can I activate photoshop on the new hardware if I can't deactivate it on the old hardware that is no longer available? Any help will be appreciated.
If it's the same machine (same CPU) there should not be any need to activate. The actiovation is tied to your CPU.
If you run into problems, then:
Unfortunately, only Adobe customer service can assist you with your issue. These are user forums; you are not addressing Adobe here.
Click on the link below, and after that click on "Still need Help? Contact us."
Then on the next page, click Chat
There is also a phone option. 1 (800) 833-6687
http://helpx.adobe.com/contact.html?step=PHXS_downloading-installing-setting-up_licensing- activation -
SCCM 2012 R2 - fresh install PXE not working
Hi there.
Fresh install.
Booting from PXE returns an error: Configuration Manager is looking for policy :(
Done a lot of googlin so far, nothing helps.
SMSPXELOGS:
00:50:56:A8:31:3A, 8D662842-2689-4683-6652-2C8F574F7B8A: No boot action. Rejected.
00:50:56:A8:31:3A, 8D662842-2689-4683-6652-2C8F574F7B8A: Not serviced.
Client lookup reply: <ClientIDReply><Identification Unknown="0" ItemKey="0" ServerName=""><Machine><ClientID/><NetbiosName/></Machine></Identification></ClientIDReply>
00:50:56:A8:31:3A, 8D662842-2689-4683-6652-2C8F574F7B8A: device is not in the database.
Getting boot action for unknown machine: item key: 2046820353
Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="2046820353" ServerName=""><Machine><ClientID/><NetbiosName/></Machine></Identification><PXEBootAction
LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="" OfferIDTime="" PkgID="" PackageVersion="" PackagePath="" BootImageID="" Mandatory=""/></ClientIDReply>
00:50:56:A8:31:3A, 8D662842-2689-4683-6652-2C8F574F7B8A: no advertisements found
bostjanc00:50:56:A8:31:3A, 8D662842-2689-4683-6652-2C8F574F7B8A: no advertisements found
This is an Unknown computer but no advertisements have been found. Have you deployed a task sequence to Unknown Computers?
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson -
Kb2920189 fails to install on Windows 2012 R2 Essentials
Hello,
I have a 2012 R2 Essentials server that fails to install the UEFI KB2920189 update. All other updates installed fine. It's running two disks, one has 8.1 the other has 2012 R2 Esssentials in dual boot mode. No VM. I have heard reports
of successful installs of this kb2920189 update that basically bricks the OS on reboot. I would like to avoid this. The error code during the failed installation is 800F0922.
ThanksHi,
Based on your description, I understand that you failed to install KB2920189 with error 800F0922.
Please refer to following operations and check if can help you to solve this issue.
Refer to the KB (KB947821), and use the inbox Deployment Image Servicing and Management (DISM) tool. Then install
this update again.
Please
reset Windows Update components and monitor the result.
Please perform a
clean boot and check if you can install this update successfully.
If this issue still persists, please navigate to: %windir%\Windowsupdate.log and check the log file if can
find some more clues.
For more details, please refer to the following KB.
How to read the Windowsupdate.log file
Hope this helps.
Best regards,
Justin Gu -
Failed to read the configuration file. Fresh install on windows 7
I have just downloaded and installed firefox on my windows 7 computer. No errors on the install. When I try to launch Firefox I get this dialog box. Configuration Error - Failed to read the configuration file. Please contact your system
administrator.Check for the presence of a mozilla.cfg file in the Firefox program folder to initialize some prefs.
This also involves the presence of a .js (JScript) file, probably in "defaults\pref" folder, that specifies to process this mozilla.cfg file.
If you have .js files apart from the channel-prefs.js file, that sets app.update.channel, in the defaults\pref folder then open this file in an editor like Notepad and please post its content.
Also please post the content of the mozilla.cfg file.
There shouldn't be a mozilla.fcg file present unless you've created it yourself to initialize some prefs.
If you have this mozilla.cfg file then best is to do a clean reinstall and delete the Firefox program folder before reinstalling a fresh copy of Firefox.
*http://kb.mozillazine.org/Preferences_not_saved#Other_solutions -
Unisphere Host Agent cannot install on Windows 2012 R2 Core
Cannot install EMC Unisphere Host Agent on Windows Server 2012 R2 Core server.
When trying to install into Hyper-V 2012 R2 I get an error informing of the requirement for Feb 2013 updates to Windows 8 and Windows server 2012.Cannot install EMC Unisphere Host Agent on Windows Server 2012 R2 Core server.
When trying to install into Hyper-V 2012 R2 I get an error informing of the requirement for Feb 2013
updates to Windows 8 and Windows server 2012.
Maybe you are looking for
-
Where did the "Detect display" command go?
I cannot find it in the System Preferences app and can't find a way to connect an external display (or video projector) to my MacBook Air
-
Hi ! I'm trying to install Oracle 10.2 on Unbreakable Linux (installed in Virtual PC). My problem is on package gcc-3.2. On distribution of Unbreakable Linux download from Oracle web - there is no gcc-3.2, so i download and try to install gcc-3.2 fro
-
Making a PDF go to a specific page after end of a video
Hi everyone, I've been trying to get a flash video to point to a specific page in a PDF document, after it is done playing. But I can't find a way to make it work. Is there a script or any way in Acrobat, so I can make it go to a specific page after
-
Add random number to a email id while creating account in active directory
Hi, I have this code with me, in this code i am creating user account into the active directory, i am facing issue in validating it. validation is: Let's say we got 2nd Aman verma into the active directory, first aman verma got id as [email protected
-
I have downloaded iCloud to my new PC and am using Windows 7 and Offie 2010. I cannot get iCloud to come up on Outlook with the choices for Calendar and Contacts, my iMail accnt is there***.me.com, but not the general Cloud choices for calendar and c