RD120 6447 giving 'host does not support passthroug​h configurat​ion'

I have an rd120 6447 rack mount lenovo server that gives the message 'host does not support passthrough configuration' when going to advanced hardware settings on an esxi 5.1 installation.  Does the rd120 support virtualization features?  Is it simply to old to support this or is there a bios option to enable to enable passthrough?

Similar Messages

  • "This virtual machine is configured for 64-bit guest operating systems. However, 64-bit operation is not possible.  This host does not support Intel VT-x"

    Hi, I have installed vmware 5.5 hypervisor on hp G8 microserver. I have created one vm as windows 2008 R2. I have also install vmware workstation 11 on this vm. In this workstation when I tried to run vmware 5.5 hypervisor I come across "This virtual machine is configured for 64-bit guest operating systems. However, 64-bit operation is not possible.  This host does not support Intel VT-x" this statement. Which shows that the host machine does not support virtualization and for that you need to go in Bios and enable it but in present case as host machine is also a vm and you would not find much detail of Bios when you log into the Bios therefore, I am pretty much stuck here. I don't see any information in relation to this. Now my question is:
    1. Can we run ESXi inside a vm which is already sitting on ESXi?

    I moved the discussion from VMware Workstation to Nested Virtualization which contains several hints on what's possible and what needs to be configured to make things work.
    André

  • Start-Transcript : This host does not support transcription.

    Hi,
    I am using Start-Transcript and Stop-Transcript in Orchestrator.
    Ex:
    Start-Transcript
    "Demo"
    Stop-Transcript
    But it is not running. It is always throwing me " This host does not support transcription. "  error
    in orchestrator as well as in PowerShell ISE.
    The same thing is working in PowerShell cmd.
    Can any one help me in doing this.
    Thanks & Regards,
    Abhi

    Hi,
    you can force "Run .Net Script" to execute the PowerShell version of the Runbook Server:
    http://www.sc-orchestrator.eu/index.php/scoblog/128-run-the-powershell-version-of-windows-executing-the-orchestrator-runbook-service-in-run-net-script-activity
    Regards,
    Stefan
    www.sc-orchestrator.eu ,
    Blog sc-orchestrator.eu

  • VMWARE host does not support VT

    My system is HP Pavillion DM3. I want to run Pi 7.1, when I start Virtual machine I got error 'VMWARE host does not support VT'.
    Please suggest me.
    PI7.0 server is running my  in system, but for PI7.1 these error is showing.
    Could you please help me out.
    Edited by: rs_Rashmi on Jan 11, 2011 10:05 AM

    Markus Waldorf wrote:
    Apparently you need to go into the BIOS setting of your computer. Normally you would have to press a certain key right after your computer reboots or starts. Usually there is also a brief message about which key to press in order to enter your system's BIOS (not inside vmware). Is this what you tried?Yes I have tried that using F2 key to bring up the BIOS and when I bring up the system BIOS, I just can't same to fine where I need to enable VT. The first 3 options in SYSTEM can not be edited.
    >
    I found the following in Google that seems to match your case:
    http://www.petri.co.il/virtual_run_a_64_bit_guest_operating_system_in_vmware.htm
    "In my case, I have a Dell Optiplex GX620 with an Intel 64bit processor. The VMware 64-bit compatibility tool told me that my computer was capable of running a 64-bit Guest, however, when I went to run it, I was told this: I found that I had to go into my BIOS and enable my Intel VT VMM capabilities. After I did that and rebooted my system, I was able to run my 64-bit OS using my already installed VMware Server."I have the same system - I will appreciate if you enter your BIOS again and find a specific area where I can enable VT.
    Thank you

  • IChat - Host does not support Kerberos authentication

    Hi all,
    I have been trying but with no success to set up an iChat server on 10.6. Our OS X server is bound to AD and will hopefully be using AD to authenticate the iChat clients. I have followed Apple's guide on commenting out the <!-- <cram-md5/> --> section of the c2s.xml file which hasn't solved our problems. Open Directory isn't running as a master it is connected to another directory (our AD directory), and as a test I set up a Wiki server on the same box and this does allow us to authenticate against AD.
    The error message we are receiving in iChat is "The host example.com does not support Kerberos authentication. The client is set to use Kerberos, the username format is [email protected] all I think the correct settings.
    Under iChat General Settings on the server the Host Domain is example.com, SSL Certificate: No Certificate, Authentication: Any Method, and Enable XMPP server-to-server federation is enable for all domains.
    This is our jabber fullstatus:
    jabber:state = "RUNNING"
    jabber:readWriteSettingsVersion = 1
    jabber:logPaths:PROXY_LOG = "/private/var/jabberd/log/proxy65.log"
    jabber:logPaths:MUCSTDLOG = "/var/jabberd/log/mu-conference.log"
    jabber:logPaths:JABBER_LOG = "/var/log/system.log"
    jabber:proxyState = "RUNNING"
    jabber:currentConnections = "0"
    jabber:currentConnectionsPort1 = "0"
    jabber:currentConnectionsPort2 = "0"
    jabber:pluginVersion = "10.6.100"
    jabber:serviceMode = "CHATSERVER"
    jabber:domainName = "example.com"
    jabber:mucState = "RUNNING"
    jabber:servicePortsAreRestricted = "NO"
    jabber:servicePortsRestrictionInfo = emptyarray
    jabber:hosts:arrayindex:0 = "example.com"
    jabber:setStateVersion = 1
    jabber:startedTime = "2010-10-07 16:12:01 +0100"
    jabber:jabberdState = "RUNNING"
    This is our changeip -checkhostname:
    Primary address = 192.168.1.20
    Current HostName = ichat.example.com
    DNS HostName = ichat.example.com
    The names match. There is nothing to change.
    dirserv:success = "success"
    Any help with this would be much appreciated, and I can supply further logs details if needed. I have used example.com to protect our domain name but i kept the format identical.
    Cheers,
    Chris

    From the console:
    08/10/2010 13:00:52 com.apple.launchd.peruser.2027651558[416] ([0x0-0x16a16a].com.apple.iChat[2873]) The USER environmental variable changed out from under us!
    08/10/2010 13:00:52 com.apple.launchd.peruser.2027651558[416] ([0x0-0x16a16a].com.apple.iChat[2873]) In a future build of the OS, this error will be fatal.
    08/10/2010 13:00:52 com.apple.launchd.peruser.2027651558[416] ([0x0-0x16b16b].com.apple.iChatAgent[2875]) The USER environmental variable changed out from under us!
    08/10/2010 13:00:52 com.apple.launchd.peruser.2027651558[416] ([0x0-0x16b16b].com.apple.iChatAgent[2875]) In a future build of the OS, this error will be fatal.
    08/10/2010 13:00:52 iChatAgent[2875] [Warning] JConnection: Error: Error Domain=XMPPErrorDomain Code=122 UserInfo=0x10020b680 "The host corepublishing.co.uk does not support Kerberos authentication."
    The iChat server log shows this at the same time:
    Oct 8 13:00:52 ichat jabberd/c2s[1051]: [7] [::ffff:192.168.2.170, port=50624] connect
    Oct 8 13:00:52 ichat jabberd/c2s[1051]: [7] [::ffff:192.168.2.170, port=50624] disconnect jid=unbound, packets: 0

  • My web host does not support the latest Firefox upgrade yet. How do I rollback the upgrade until they do?

    Certain functions of their web hosting features will not work with the recent upgrade. I am using Bulk Register website creator. I have been advised by their support that they are not supporting the firefox upgrade yet

    Firefox 3.6.x can be found here:
    * http://www.mozilla.com/en-US/firefox/all-older.html

  • Web Host Does not support QuickTIme

    I am in the process of having a website built that requires audio streaming. Comparable websites use QT which seems to work well with most browsers and computers.
    My web host uses Real Audio. This is causing problems because it doesn't seem to stream as well as QT. Many browers don't have ready access to the plug-ins (both Windows and Mac). I am afraid customers will bypass my files rather than taking the time to figure out how to get the required plug-ins for playback.
    Is there anyway I can export QT files into my site without their support, or do I need to cut my losses and look for a QT friendly host?
    G4 PowerBook   Mac OS X (10.3)  

    Ah, then you don't need to be concerned with streaming. It's main benefit is being able to take live data and broadcast it at a rate that makes it great for realtime.
    Since you have the luxury of recording, compressing and posting at a later time, then you won't have a problem using QuickTime's Fast Start function. Two tools I'd recommend up front is
    Lilipot http://www.qtbridge.com/lillipot/lillipot.html
    and
    Pageot http://www.qtbridge.com/pageot/pageot.html
    Lilipot will allow processing of any QuickTime file to enable Fast Start (play as you download) and Pageot will help when setting up your html to make sure that PC and Macintosh users both get a similar experience.
    You should be able to just create an audio file, run Lilipot on it then create an html page with Pageot to test how your solution will work. Post back if you need any other specific information.

  • How do i delploy on hosted server which does not support crystal. Is RAS ?

    have to put a solution on a public hosted server. it does not support crystal . cannot add to GAC
    if i use RAS(or cr 2008 server) on another server . Web app works on public server but points to my RAS server. Do I still need components on the public server. if I do this will not work,
    any ideas
    John

    many thanks. there is some tendancy to cloud hosts. all you get is ftp access and .net ompersonation.
    just drop the webisite in. so no MSI use which also rules out merged modules
    thanks
    john

  • Hosting company does not support SQL query with OUTFILE clause

    From my mysql database, I want to allow the user to run a query and produce a csv / text file of our membership database.   Unfortunately,  I just found out my hosting company does not support the SQL query with OUTFILE clause for MySQL database.
    Are there any other options available to produce a file besides me running the query in phpadmin and making the file available to users.
    Thanks.  George

    Maybe this external Export Mysql data to CSV - PHP tutorial will be of help
    Cheers,
    Günter

  • Fennec 4.0b6pre installs but immediately closes giving this message on X10 mini pro 2.1 "fennec does not support this device and you may experince problems."

    '''Fennec 4.0b6pre (arm6 nightly build) installs but immediately closes giving this message on X10 mini pro 2.1 "Fennec does not support this device and you may experience problems." and two option "continue" & "quit" but closes before clicking any button immediately. '''

    https://wiki.mozilla.org/Mobile/Platforms/Android#System_Requirements
    Your device (I assume it's `'''Sony Ericsson Xperia X10 Mini'''`) is not compatible with Fennec ARMv7-optimized releases, but might be able to run the [https://wiki.mozilla.org/Mobile/Platforms/Android#ARMv6_.28experimental.29 experimental ARMv6 nightly builds].

  • Getting error:- Your CPU does not support long mode. Use a 32bit distribution--? on OEL 64 bit host for OEL 64 bitguest

    Getting error:- Your CPU does not support long mode. Use a 32bit distribution--?
    I am using entire Oracle Stack..OEL, ORACLE VBOX
    Trying to install guest OEL 5.6 x86-64 bit on virtualbox 4.3 on a (Dell 2950 Server with host OS OEL 5.6  x86-64 bit) .
    and it complains of -->Your CPU does not support long mode. Use a 32bit distribution
    I am struck and unsure how to proceed . I appreciate any help regarding this.
    I enabled the VT (Virtualization Technology) option in the BIOS and then gave it a try. Does not work?

    Hi
    Looks like the 64 Bit operating system is not supported. Enable the VT (Virtualization Technology) option in the BIOS and then give a try again.
    Edited by: 891882 on Oct 28, 2011 1:21 PM

  • "LZPL driver does not support SAPscript! There may be no printout"

    Hello Experts,
    (Please note some problem alike was discussed, the answer was not really clear though
    Therefore I refer to this error once again)...
    Tying to print a sapcript form (label).
    Label design with zebra software; copied to sapscript. (ZPL Code, thus)
    Spool showing ZPL commands instead of content.
    Error in spool: "LZPL driver does not support SAPscript! There may be no printout"
    configuration as per TAC SPAD:
    Device type : LB_ZEB (Zebra label printer IBM850)
    Host Spool Access Method:  direct operating system call
    Print mode default printer setting
    Paper tray default tray
    print control selection
    SLINE flag at; Flag at HEX; Control Char Seq = 0D0A
    SPAGE flag at; Flag at HEX; Control Char Seq = 0D0A
    |
    Please advise. Thanx in  advance
    Raf

    Aim was to print labels for goods receipt with Sapscript.
    I started using device types for zebra printers assuming they were adequate for Zebra printers. This is also the usual recommendation in many ABAP chats.
    But they do not work and even give the error message "LZPL driver does not support SAPscript!
    I could achieve a solution this way:
    1. I Used Zebra Designer for MYSAP: Design label / export label as ITF-file
    helpful link:
    http://www.servopack.de/support/zebra/ZDesignerSAP_RG.pdf
    2. SO10 create text (Standard), any name. Upload  ITF-file into it. Copy code into label text, see OMCF "maintain label text"
    3. OMCF,here I used the standard config.
    Alternatively to point 2 you can upload ITF-file directly into editor (step "maintain label text")
    4. Maintain printer in TA SPAD.I did not maintain it (like very often recommended) as  zebra-device-type. I use the ASCIIPRI-device-type. Once it was maintained I went to 3rd tab "device type" and tried different drivers --> at the end I used STNDwhich turned out to work best for my purpose.
    I do write all these steps because there are a lot of solutions in the web that can drive one crazy not giving a real solution...
    But at the end it is rather trivial, if you have the right hints...

  • I am told that my browser does not support iframes when trying to access a web site.

    This is Google's cache of http://sitetrail.com/askearth.com. It is a snapshot of the page as it appeared on Sep 19, 2010 10:44:02 GMT. The current page could have changed in the meantime. Learn more
    Full version These search terms are highlighted: history askearth com
    * Contact Us
    SiteTrail - Website News and Analysis
    * Business
    * Dev & Design
    * Entertainment
    * Mobile
    * Social Media
    * Tech
    Search in SiteTrail askearth.com (visit site) This data was last updated 6 months ago (update data).
    Site Profile Estimated Value: $5,582.16 USD Estimated Revenue: $7.60 USD per day $227.90 USD per month $2,772.81 USD per year Estimated Pageviews: 3,355 per day 100,648 per month 1,224,551 per year Alexa Rank: #447,581 Google Index: show google links Yahoo Index: show yahoo links Bing Index: show bing links History: show history Site Title: Interesting Questions - AskEarth Site Traffic
    Site Server Server IP Address: 140.174.79.37 Server IP Decimal: -1934733531 Server IP Location: Pordenone, Friuli-Venezia Giulia, Italy
    Your browser does not support iframes. Whois Information Welcome to the Network Solutions(R) Registrar WHOIS Server.
    The IP address from which you have visited the Network Solutions Registrar WHOIS database is contained within a list of IP addresses that may have failed to abide by Network Solutions' WHOIS policy. Failure to abide by this policy can adversely impact our systems and servers, preventing the processing of other WHOIS requests.
    To see the Network Solutions WHOIS Policy, click on or copy and paste the following URL into your browser:
    http://www.networksolutions.com/whois/index.jhtml
    If you feel that you have received this message in error, please email us using the online form at http://www.networksolutions.com/help/email.jsp with the following information:
    Whois Query: askearth.com YOUR IP address is 174.129.155.56 Date and Time of Query: Tue Feb 23 00:49:37 EST 2010 Reason Code: IE DNS Records Host Class Type IP TTL Target Other askearth.com IN A 140.174.79.37 7199 askearth.com IN NS 7200 ns53.worldnic.com askearth.com IN NS 7200 ns54.worldnic.com askearth.com IN SOA 7200 mname: NS53.WORLDNIC.com rname: namehost.WORLDNIC.com serial: 108121504 refresh: 10800 retry: 3600 expire: 604800 minimum-ttl: 3600 HTTP Headers HTTP/1.1 302 Found Date: Tue, 23 Feb 2010 05:59:34 GMT Server: Apache/2.2.11 (Unix) mod_fastcgi/2.4.2 PHP/4.4.9 with Suhosin-Patch mod_ssl/2.2.11 OpenSSL/0.9.7m mod_apreq2-20051231/2.6.0 mod_perl/2.0.3 Perl/v5.8.7 Location: http://askearth.com/go/home Content-Length: 417 Connection: close Content-Type: text/html; charset=iso-8859-1
    HTTP/1.1 200 OK Date: Tue, 23 Feb 2010 05:59:35 GMT Server: Apache/2.2.11 (Unix) mod_fastcgi/2.4.2 PHP/4.4.9 with Suhosin-Patch mod_ssl/2.2.11 OpenSSL/0.9.7m mod_apreq2-20051231/2.6.0 mod_perl/2.0.3 Perl/v5.8.7 Set-Cookie: id=11010246; EXPIRES=Sun, 01-Apr-29 00:00:00 GMT; PATH=/ Set-Cookie: pass=u0zit0yv; EXPIRES=Sun, 01-Apr-29 00:00:00 GMT; PATH=/ Set-Cookie: since=1266904775; PATH=/ Connection: close Content-Type: text/html Firefox Add-on SiteTrail Firefox Add-onPerform SiteTrail lookups via right-click menu straight from your web browser! Popular Lookups
    * google.com#1
    * facebook.com#2
    * youtube.com#3
    * yahoo.com#4
    * live.com#5
    * baidu.com#6
    * wikipedia.org#7
    * blogspot.com#8
    * msn.com#9
    Browse Lookups
    A B C D E F G H I
    J K L M N O P Q R S T U V W X Y Z Recent Lookups
    * askearth.com#447,581
    * evdenevenakliyatv.com#442,990
    * mytaskhelper.com#756,476
    * fikralari.net#639,299
    * typemytape.com#1,547,530
    * tmmod.info#1,078,434
    * torrentplus.org#233,938
    * communitycollegelistin...#430,008
    * cadbury.co.uk#104,852
    * myhobbyblogs.com#297,443
    Random Lookups
    * solidmastermind.com#931,183
    * homelegance.com#277,584
    * homepage-anleitung.de#1,091,134
    * icicigroupcompanies.co...#1,513,887
    * ptiboo.ch#744,058
    * fachportal-paedagogik....#312,102
    * lcpo.com#336,926
    * spitinet.gr#904,561
    * sportingpulse.com#37,069
    * v-pillsbuyutucuhap.com#543,342
    * sameskyboard.com#51,252
    * alparslanpazarlama.com...#1,444,281
    * ventausa.com#221,470
    * dentalmag.org#234,937
    * digitalfoci.com#1,214,872
    * blank-label.com#273,247
    * efun.ir#446,350
    * greatamericandays.com#579,258
    * it007.com#58,123
    * hairyclipz.com#760,892
    Navigation
    * Contact Us
    Categories
    * Business
    * Dev & Design
    * Entertainment
    * Mobile
    * Social Media
    * Tech
    Recent News
    * VP of Twitter Says Twitter is NOT A Social Network
    * Google Puts White Spaces To Use
    * YouTube Instant Experiment Gives Creator a Job At YouTube
    * YouTube Time Machine – A New Website To Waste Hours On
    * Google’s New Instant Search – Saving 11 Hours Every Second
    * Facebook Notes Gets New Tools
    Recent Lookups
    * askearth.com#447,581
    * evdennakliyateve.com#442,990
    * mytaskhelper.com#756,476
    * maximumwoman.com#639,299
    * typemytape.com#1,547,530
    * tmmod.info#1,078,434
    © 2010 SiteTrail. All Rights Reserved.

    I'm not clear on where you are seeing that text. When I view Google's cached page from the page found in this search
    https://www.google.com/search?q=site%3Asitetrail.com%2Faskearth.com
    It doesn't match yours exactly. There is an iframe with a Google map in it in the "Hosting Analysis" section, which in your pasted page seems to be the "Site Server" section.
    Which Google site did you search?

  • "DBSL does not support extended connect protocol" while configuring SSFS

    Hi, I'm trying to configure ssfs on ERP EHP7 on HANA Database system. Doing it with this guide - SSFS Implementation for Oracle Database
    But when I'm trying to test connection with r3trans I got following error in the log:
    4 ETW000  [     dev trc,00000]  read_con_info_ssfs(): DBSL does not support extended connect protocol
    4 ETW000                         ==> ssfs won't be used                                                   26  0.004936
    I already updated DBSL_LIB to the latest version, but it doesn't help.
    Here is full log:
    4 ETW000 C:\usr\sap\CM1\DVEBMGS04\exe\R3trans.EXE version 6.24 (release 741 - 16.05.14 - 20:14:06).
    4 ETW000 unicode enabled version
    4 ETW000 ===============================================
    4 ETW000
    4 ETW000 date&time   : 02.06.2014 - 13:49:16
    4 ETW000 control file: <no ctrlfile>
    4 ETW000 R3trans was called as follows: C:\usr\sap\CM1\DVEBMGS04\exe\R3trans.EXE -d
    4 ETW000  trace at level 2 opened for a given file pointer
    4 ETW000  [     dev trc,00000]  Mon Jun 02 13:49:16 2014                                                 106  0.000106
    4 ETW000  [     dev trc,00000]  db_con_init called                                                        36  0.000142
    4 ETW000  [     dev trc,00000]  set_use_ext_con_info(): ssfs will be used to get connect information
    4 ETW000                                                                                                  61  0.000203
    4 ETW000  [     dev trc,00000]  determine_block_commit: no con_hdl found as blocked for con_name = R/3
    4 ETW000                                                                                                  26  0.000229
    4 ETW000  [     dev trc,00000]  create_con (con_name=R/3)                                                 17  0.000246
    4 ETW000  [     dev trc,00000]  Loading DB library 'dbhdbslib.dll' ...                                    46  0.000292
    4 ETW000  [     dev trc,00000]  DlLoadLib success: LoadLibrary("dbhdbslib.dll"), hdl 0, count 1, addr 000007FEED100000
    4 ETW000                                                                                                3840  0.004132
    4 ETW000  [     dev trc,00000]      using "C:\usr\sap\CM1\DVEBMGS04\exe\dbhdbslib.dll"                    21  0.004153
    4 ETW000  [     dev trc,00000]  Library 'dbhdbslib.dll' loaded                                            21  0.004174
    4 ETW000  [     dev trc,00000]  function DbSlExpFuns loaded from library dbhdbslib.dll                    42  0.004216
    4 ETW000  [     dev trc,00000]  Version of 'dbhdbslib.dll' is "741.10", patchlevel (0.22)                 81  0.004297
    4 ETW000  [     dev trc,00000]  function dsql_db_init loaded from library dbhdbslib.dll                   25  0.004322
    4 ETW000  [     dev trc,00000]  function dbdd_exp_funs loaded from library dbhdbslib.dll                  41  0.004363
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    47  0.004410
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=-1,command=39,arg_p=0000000000000000)            24  0.004434
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    18  0.004452
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=-1,command=10,arg_p=000000000205F170)            22  0.004474
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    17  0.004491
    4 ETW000  [     dev trc,00000]  New connection 0 created                                                  17  0.004508
    4 ETW000  [     dev trc,00000]  0: name = R/3, con_id = -000000001, state = DISCONNECTED, tx = NO , bc = NO , oc = 000, hc = NO , perm = YES, reco = NO , info = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog = 
    4 ETW000                                                                                                  38  0.004546
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=-1,command=10,arg_p=0000000141BAEDB0)            44  0.004590
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    19  0.004609
    4 ETW000  [     dev trc,00000]  db_con_connect (con_name=R/3)                                             19  0.004628
    4 ETW000  [     dev trc,00000]  determine_block_commit: no con_hdl found as blocked for con_name = R/3
    4 ETW000                                                                                                  24  0.004652
    4 ETW000  [     dev trc,00000]  find_con_by_name found the following connection:                          17  0.004669
    4 ETW000  [     dev trc,00000]  0: name = R/3, con_id = 000000000, state = DISCONNECTED, tx = NO , bc = NO , oc = 000, hc = NO , perm = YES, reco = NO , info = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog = 
    4 ETW000                                                                                                 164  0.004833
    4 ETW000  [     dev trc,00000]  read_con_info_ssfs(): reading connect info for connection R/3             34  0.004867
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=-1,command=74,arg_p=0000000000000000)            24  0.004891
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=15)                                                   19  0.004910
    4 ETW000  [     dev trc,00000]  read_con_info_ssfs(): DBSL does not support extended connect protocol
    4 ETW000                         ==> ssfs won't be used                                                   26  0.004936
    4 ETW000  [     dev trc,00000]  { DbSlHDBConnect(con_info_p=0000000000000000)                             31  0.004967
    4 ETW000  [     dev trc,00000]  DBHDBSLIB : version 741.10, patch 0.022 (Make PL 0.26)                    34  0.005001
    4 ETW000  [     dev trc,00000]  HDB shared library (dbhdbslib) patchlevels (last 10)                      32  0.005033
    4 ETW000  [     dev trc,00000]    (0.022) Get database version via dbsl call (note 1976918)               24  0.005057
    4 ETW000  [     dev trc,00000]    (0.020) FDA: Core Dump in SELECT ... FOR ALL ENTRIES for tables with strings (note 1970276)
    4 ETW000                                                                                                  32  0.005089
    4 ETW000  [     dev trc,00000]    (0.020) SQL DDL with data aging (note 1897636)                          21  0.005110
    4 ETW000  [     dev trc,00000]    (0.017) Datatype NCLOB missing in tablesize calculation (note 1952609)
    4 ETW000                                                                                                  30  0.005140
    4 ETW000  [     dev trc,00000]    (0.014) Tablesize calculation for HANA optimized (note 1952609)         25  0.005165
    4 ETW000  [     dev trc,00000]    (0.014) Native SQL UPSERT with DataAging (note 1897636)                 21  0.005186
    4 ETW000  [     dev trc,00000]    (0.014) DBSL supports HANA revision number up to 3 digits (note 1952701)
    4 ETW000                                                                                                  27  0.005213
    4 ETW000  [     dev trc,00000]    (0.010) Quotes missing by FAE with the hint dbsl_equi_join (note 1939234)
    4 ETW000                                                                                                  28  0.005241
    4 ETW000  [     dev trc,00000]    (0.007) Obsere deactivate aging flag (note 1897636)                     24  0.005265
    4 ETW000  [     dev trc,00000]    (0.007) Calculated record length for INSERT corrected (note 1897636)
    4 ETW000                                                                                                  27  0.005292
    4 ETW000  [     dev trc,00000]                                                                            15  0.005307
    4 ETW000  [     dev trc,00000]   -> init()                                                                21  0.005328
    4 ETW000  [     dev trc,00000]    STATEMENT_CACHE_SIZE = 1000                                            181  0.005509
    4 ETW000  [     dev trc,00000]   -> init()                                                               505  0.006014
    4 ETW000  [     dev trc,00000]   -> loadClientRuntime()                                                   27  0.006041
    4 ETW000  [     dev trc,00000]  Loading SQLDBC client runtime ...                                         19  0.006060
    4 ETW000  [     dev trc,00000]  SQLDBC Module  : C:\usr\sap\CM1\hdbclient\libSQLDBCHDB.dll               779  0.006839
    4 ETW000  [     dev trc,00000]  SQLDBC Runtime : libSQLDBCHDB 1.00.68 Build 0384084-1510                  74  0.006913
    4 ETW000  [     dev trc,00000]  SQLDBC client runtime is 1.00.68.0384084                                  45  0.006958
    4 ETW000  [     dev trc,00000]   -> getNewConnection()                                                    28  0.006986
    4 ETW000  [     dev trc,00000]   <- getNewConnection(con_hdl=0)                                           78  0.007064
    4 ETW000  [     dev trc,00000]   -> checkEnvironment(con_hdl=0)                                           34  0.007098
    4 ETW000  [     dev trc,00000]   -> connect(con_info_p=0000000000000000)                                  27  0.007125
    4 ETW000  [     dev trc,00000]  Try to connect via secure store (DEFAULT) on connection 0 ...             62  0.007187
    4 ETW000  [     dev trc,00000]   -> check_db_params(con_hdl=0)                                         61365  0.068552
    4 ETW000  [     dev trc,00000]  Attach to HDB : 1.00.68.384084 (NewDB100_REL)                           7595  0.076147
    4 ETW000  [     dev trc,00000]  Database release is HDB 1.00.68.384084                                    49  0.076196
    4 ETW000  [     dev trc,00000]  INFO : Database 'HDB/00' instance is running on 'hanaserver'            6867  0.083063
    4 ETW000  [     dev trc,00000]  INFO : Connect to DB as 'SAPCM1', connection_id=201064                 43659  0.126722
    4 ETW000  [     dev trc,00000]  DB max. input host variables  : 32767                                   6954  0.133676
    4 ETW000  [     dev trc,00000]  DB max. statement length      : 1048576                                   34  0.133710
    4 ETW000  [     dev trc,00000]  DB max. array size            : 100000                                    75  0.133785
    4 ETW000  [     dev trc,00000]  use decimal precision as length                                           21  0.133806
    4 ETW000  [     dev trc,00000]  ABAPVARCHARMODE is used                                                   19  0.133825
    4 ETW000  [     dev trc,00000]  INFO : DBSL buffer size = 1048576                                         20  0.133845
    4 ETW000  [     dev trc,00000]  Command info enabled                                                      19  0.133864
    4 ETW000  [     dev trc,00000]  Now I'm connected to HDB                                                  18  0.133882
    4 ETW000  [     dev trc,00000]  00: hanaserver-HDB/00, since=20140602134916, ABAP= <unknown> (0)          30  0.133912
    4 ETW000  [     dev trc,00000]  } DbSlHDBConnect(rc=0)                                                    18  0.133930
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=30,arg_p=0000000000000000)             24  0.133954
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    18  0.133972
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=21,arg_p=000000000205F460)             22  0.133994
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    18  0.134012
    4 ETW000  [     dev trc,00000]  Connection 0 opened (DBSL handle 0)                                       36  0.134048
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=7,arg_p=000000000205F4B0)              25  0.134073
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    17  0.134090
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=63,arg_p=000000000205F2B0)             23  0.134113
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    18  0.134131
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=21,arg_p=000000000205F300)          12214  0.146345
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    32  0.146377
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=11,arg_p=000000000205F420)             26  0.146403
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    18  0.146421
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=22,arg_p=000000000205F390)             23  0.146444
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    37  0.146481
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=13,arg_p=000000000205F260)             29  0.146510
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    18  0.146528
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=24,arg_p=000000000205F210)             37  0.146565
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    35  0.146600
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=51,arg_p=000000000205F200)             40  0.146640
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=15)                                                   31  0.146671
    4 ETW000  [     dev trc,00000]  { DbSlHDBPrepare(con_hdl=0,ss_p=000000000205F4E0,op=3,da_p=000000000205F540)
    4 ETW000                                                                                                  46  0.146717
    4 ETW000  [     dev trc,00000]   -> buildSQLStmt(stmt_p=000000000205F4B0,da_p=000000000205F540,for_explain=0,lock=0,op=3)
    4 ETW000                                                                                                  89  0.146806
    4 ETW000  [     dev trc,00000]   <- buildSQLStmt(len=27,op=3,#marker=0,#lob=0)                            33  0.146839
    4 ETW000  [     dev trc,00000]   -> stmt_prepare(sc_hdl=0000000003AEAC40,ss_p=000000000205F4E0)           75  0.146914
    4 ETW000  [     dev trc,00000]  sc_p=0000000003AEAC40,no=0,idc_p=0000000000000000,con=0,act=0,slen=27,smax=256,#vars=0,stmt=000000000AD913E0,table=SVERS                        
    4 ETW000                                                                                                  46  0.146960
    4 ETW000  [     dev trc,00000]  SELECT VERSION FROM SVERS  ;                                              23  0.146983
    4 ETW000  [     dev trc,00000]    CURSOR C_0000 PREPARE on connection 0                                   21  0.147004
    4 ETW000  [     dev trc,00000]  } DbSlHDBPrepare(rc=0)                                                  6174  0.153178
    4 ETW000  [     dev trc,00000]  { DbSlHDBRead(con_hdl=0,ss_p=000000000205F4E0,da_p=000000000205F540)
    4 ETW000                                                                                                  53  0.153231
    4 ETW000  [     dev trc,00000]   ABAP USER is not set                                                     25  0.153256
    4 ETW000  [     dev trc,00000]   -> activate_stmt(sc_hdl=0000000003AEAC40,da_p=000000000205F540)          25  0.153281
    4 ETW000  [     dev trc,00000]   -> bind_variables(sc_hdl=0000000003AEAC40,in_out=0,bulk=0,da_p=000000000205F540)
    4 ETW000                                                                                                  30  0.153311
    4 ETW000  [     dev trc,00000]   -> allocParameter(in_out=0,col_cnt=0)                                    21  0.153332
    4 ETW000  [     dev trc,00000]   -> calculate_record_length(sc_hdl=0000000003AEAC40,in_out=0,bulk=0,types=0000000000000000,#col=0,useBulkInsertWithLobs=0)
    4 ETW000                                                                                                  54  0.153386
    4 ETW000  [     dev trc,00000]      #float=0,#lob=0,itab=0,#short=0,#int=0,#llong=0,#uc=0,rec_lng=0,db_lng=0
    4 ETW000                                                                                                  33  0.153419
    4 ETW000  [     dev trc,00000]   <- calculate_record_length(row_size=0, lob_cnt=0, lob_pw_cnt=0, long_cnt=0, ins_bulk_lob=0, row_max=1)
    4 ETW000                                                                                                  33  0.153452
    4 ETW000  [     dev trc,00000]   -> exec_modify(sc_hdl=0000000003AEAC40,ss_p=000000000205F4E0,bulk=0,in_out=1,da_p=000000000205F540)
    4 ETW000                                                                                                  36  0.153488
    4 ETW000  [     dev trc,00000]   -> stmt_execute(sc_hdl=0000000003AEAC40,ss_p=000000000205F4E0,in_out=1,da_p=000000000205F540)
    4 ETW000                                                                                                  95  0.153583
    4 ETW000  [     dev trc,00000]    OPEN CURSOR C_0000 on connection 0                                      28  0.153611
    4 ETW000  [     dev trc,00000]    CURSOR C_0000 SET InputSize=1                                           23  0.153634
    4 ETW000  [     dev trc,00000]    CURSOR C_0000 EXECUTE on connection 0                                   22  0.153656
    4 ETW000  [     dev trc,00000]    execute() of C_0000, #rec=0, rcSQL=0, rc=0                            6404  0.160060
    4 ETW000  [     dev trc,00000]    CURSOR C_0000, rc=0,#rec=0,#dbcount=0                                   36  0.160096
    4 ETW000  [     dev trc,00000]   -> bind_variables(sc_hdl=0000000003AEAC40,in_out=1,bulk=0,da_p=000000000205F540)
    4 ETW000                                                                                                  33  0.160129
    4 ETW000  [     dev trc,00000]   -> allocParameter(in_out=1,col_cnt=1)                                    21  0.160150
    4 ETW000  [     dev trc,00000]   -> calculate_record_length(sc_hdl=0000000003AEAC40,in_out=1,bulk=0,types=000000000205F518,#col=1,useBulkInsertWithLobs=0)
    4 ETW000                                                                                                  37  0.160187
    4 ETW000  [     dev trc,00000]      #float=0,#lob=0,itab=0,#short=0,#int=0,#llong=0,#uc=72,rec_lng=144,db_lng=144
    4 ETW000                                                                                                  31  0.160218
    4 ETW000  [     dev trc,00000]   <- calculate_record_length(row_size=144, lob_cnt=0, lob_pw_cnt=0, long_cnt=0, ins_bulk_lob=0, row_max=1)
    4 ETW000                                                                                                  31  0.160249
    4 ETW000  [     dev trc,00000]   -> allocIndicator(in_out=1,row_cnt=1)                                    21  0.160270
    4 ETW000  [     dev trc,00000]   -> allocData(in_out=1,size=1048576)                                      21  0.160291
    4 ETW000  [     dev trc,00000]   -> bind_type_and_length(sc_hdl=0000000003AEAC40,in_out=1,bulk=0,arr_size=1,types=000000000205F518,da_p=000000000205F540)
    4 ETW000                                                                                                  45  0.160336
    4 ETW000  [     dev trc,00000]   -> exec_fetch(sc_hdl=0000000003AEAC40,bulk=0,da_p=000000000205F540)
    4 ETW000                                                                                                  41  0.160377
    4 ETW000  [     dev trc,00000]      xcnt=1,row_i=0,row_pcnt=0                                             20  0.160397
    4 ETW000  [     dev trc,00000]   -> stmt_fetch(sc_hdl=0000000003AEAC40)                                   20  0.160417
    4 ETW000  [     dev trc,00000]    CURSOR C_0000 FETCH (xcnt=1) on connection 0                            23  0.160440
    4 ETW000  [     dev trc,00000]    next() of C_0000, rc=0                                                  27  0.160467
    4 ETW000  [     dev trc,00000]    fetch() of C_0000, #rec=1, rc=0, rcSQL=0                                28  0.160495
    4 ETW000  [     dev trc,00000]   -> deactivate_stmt(sc_hdl=0000000003AEAC40,da_p=000000000205F540,rc=0)
    4 ETW000                                                                                                  91  0.160586
    4 ETW000  [     dev trc,00000]   -> StmtCacheFree(DBSL:C_0000)                                            24  0.160610
    4 ETW000  [     dev trc,00000]    CURSOR C_0000 CLOSE resultset on connection 0                           20  0.160630
    4 ETW000  [     dev trc,00000]  } DbSlHDBRead(rc=0)                                                       34  0.160664
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=43,arg_p=00000001400FAB06)             25  0.160689
    4 ETW000  [     dev trc,00000]  INFO : SAP RELEASE (DB) = 740                                             19  0.160708
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    16  0.160724
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=41,arg_p=00000001400FAB98)             49  0.160773
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    19  0.160792
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=14,arg_p=0000000002055888)             22  0.160814
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    18  0.160832
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=50,arg_p=0000000002055880)             22  0.160854
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    26  0.160880
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=52,arg_p=00000000020558F0)             23  0.160903
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    17  0.160920
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=20,arg_p=0000000141FC74F0)             99  0.161019
    4 ETW000  [     dev trc,00000]  INFO : STMT SIZE = 1048576                                                21  0.161040
    4 ETW000  [     dev trc,00000]  INFO : MARKER_CNT = 32767                                                 18  0.161058
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    19  0.161077
    4 ETW000  [     dev trc,00000]  NTAB: SELECT COMPCNT, UNICODELG FROM DDNTT WHERE TABNAME = 'SVERS'...
    4 ETW000                                                                                                  38  0.161115
    4 ETW000  [     dev trc,00000]  { DbSlHDBPrepare(con_hdl=0,ss_p=0000000002055160,op=3,da_p=00000000020551B0)
    4 ETW000                                                                                                  31  0.161146
    4 ETW000  [     dev trc,00000]   -> buildSQLStmt(stmt_p=0000000002055180,da_p=00000000020551B0,for_explain=0,lock=0,op=3)
    4 ETW000                                                                                                  32  0.161178
    4 ETW000  [     dev trc,00000]   <- buildSQLStmt(len=63,op=3,#marker=0,#lob=0)                            23  0.161201
    4 ETW000  [     dev trc,00000]   -> stmt_prepare(sc_hdl=0000000003AEACD8,ss_p=0000000002055160)           38  0.161239
    4 ETW000  [     dev trc,00000]  sc_p=0000000003AEACD8,no=1,idc_p=0000000000000000,con=0,act=0,slen=63,smax=256,#vars=0,stmt=000000000AE09690,table=DDNTT                        
    4 ETW000                                                                                                  38  0.161277
    4 ETW000  [     dev trc,00000]  SELECT COMPCNT, UNICODELG FROM "DDNTT" WHERE TABNAME = 'SVERS' ;          21  0.161298
    4 ETW000  [     dev trc,00000]    CURSOR C_0001 PREPARE on connection 0                                   19  0.161317
    4 ETW000  [     dev trc,00000]  } DbSlHDBPrepare(rc=0)                                                  6453  0.167770
    4 ETW000  [     dev trc,00000]  db_con_test_and_open: 1 open cursors (delta=1)                            30  0.167800
    4 ETW000  [     dev trc,00000]  db_con_check_dirty: 1 open cursors, tx = NO , bc = NO                     18  0.167818
    4 ETW000  [     dev trc,00000]  db_con_check_dirty: db_con_dirty = YES                                    16  0.167834
    4 ETW000  [     dev trc,00000]  { DbSlHDBBegRead(con_hdl=0,ss_p=0000000002055160,da_p=00000000020551B0)
    4 ETW000                                                                                                  35  0.167869
    4 ETW000  [     dev trc,00000]   ABAP USER is not set                                                     23  0.167892
    4 ETW000  [     dev trc,00000]   -> activate_stmt(sc_hdl=0000000003AEACD8,da_p=00000000020551B0)          23  0.167915
    4 ETW000  [     dev trc,00000]   -> bind_variables(sc_hdl=0000000003AEACD8,in_out=0,bulk=0,da_p=00000000020551B0)
    4 ETW000                                                                                                  32  0.167947
    4 ETW000  [     dev trc,00000]   -> allocParameter(in_out=0,col_cnt=0)                                    23  0.167970
    4 ETW000  [     dev trc,00000]   -> calculate_record_length(sc_hdl=0000000003AEACD8,in_out=0,bulk=0,types=0000000000000000,#col=0,useBulkInsertWithLobs=0)
    4 ETW000                                                                                                  34  0.168004
    4 ETW000  [     dev trc,00000]      #float=0,#lob=0,itab=0,#short=0,#int=0,#llong=0,#uc=0,rec_lng=0,db_lng=0
    4 ETW000                                                                                                  30  0.168034
    4 ETW000  [     dev trc,00000]   <- calculate_record_length(row_size=0, lob_cnt=0, lob_pw_cnt=0, long_cnt=0, ins_bulk_lob=0, row_max=1)
    4 ETW000                                                                                                  31  0.168065
    4 ETW000  [     dev trc,00000]   -> exec_modify(sc_hdl=0000000003AEACD8,ss_p=0000000002055160,bulk=0,in_out=1,da_p=00000000020551B0)
    4 ETW000                                                                                                  32  0.168097
    4 ETW000  [     dev trc,00000]   -> stmt_execute(sc_hdl=0000000003AEACD8,ss_p=0000000002055160,in_out=1,da_p=00000000020551B0)
    4 ETW000                                                                                                  32  0.168129
    4 ETW000  [     dev trc,00000]    OPEN CURSOR C_0001 on connection 0                                      20  0.168149
    4 ETW000  [     dev trc,00000]    CURSOR C_0001 SET InputSize=1                                           19  0.168168
    4 ETW000  [     dev trc,00000]    CURSOR C_0001 EXECUTE on connection 0                                   20  0.168188
    4 ETW000  [     dev trc,00000]    execute() of C_0001, #rec=0, rcSQL=0, rc=0                            5712  0.173900
    4 ETW000  [     dev trc,00000]    CURSOR C_0001, rc=0,#rec=0,#dbcount=0                                   34  0.173934
    4 ETW000  [     dev trc,00000]   -> bind_variables(sc_hdl=0000000003AEACD8,in_out=1,bulk=1,da_p=00000000020551B0)
    4 ETW000                                                                                                  32  0.173966
    4 ETW000  [     dev trc,00000]   -> allocParameter(in_out=1,col_cnt=2)                                    21  0.173987
    4 ETW000  [     dev trc,00000]   -> calculate_record_length(sc_hdl=0000000003AEACD8,in_out=1,bulk=1,types=0000000002055240,#col=2,useBulkInsertWithLobs=0)
    4 ETW000                                                                                                  34  0.174021
    4 ETW000  [     dev trc,00000]      #float=0,#lob=0,itab=0,#short=2,#int=0,#llong=0,#uc=0,rec_lng=16,db_lng=4
    4 ETW000                                                                                                  30  0.174051
    4 ETW000  [     dev trc,00000]   <- calculate_record_length(row_size=16, lob_cnt=0, lob_pw_cnt=0, long_cnt=0, ins_bulk_lob=0, row_max=65536)
    4 ETW000                                                                                                  32  0.174083
    4 ETW000  [     dev trc,00000]   -> allocIndicator(in_out=1,row_cnt=65536)                                20  0.174103
    4 ETW000  [     dev trc,00000]   -> allocData(in_out=1,size=1048576)                                      30  0.174133
    4 ETW000  [     dev trc,00000]   -> bind_type_and_length(sc_hdl=0000000003AEACD8,in_out=1,bulk=1,arr_size=65536,types=0000000002055240,da_p=00000000020551B0)
    4 ETW000                                                                                                  36  0.174169
    4 ETW000  [     dev trc,00000]  } DbSlHDBBegRead(rc=0)                                                    24  0.174193
    4 ETW000  [     dev trc,00000]  { DbSlHDBExeRead(con_hdl=0,ss_p=0000000002055160,da_p=00000000020551B0)
    4 ETW000                                                                                                  35  0.174228
    4 ETW000  [     dev trc,00000]   ABAP USER is not set                                                     20  0.174248
    4 ETW000  [     dev trc,00000]   -> exec_fetch(sc_hdl=0000000003AEACD8,bulk=0,da_p=00000000020551B0)
    4 ETW000                                                                                                  33  0.174281
    4 ETW000  [     dev trc,00000]      xcnt=1,row_i=0,row_pcnt=0                                             20  0.174301
    4 ETW000  [     dev trc,00000]   -> stmt_fetch(sc_hdl=0000000003AEACD8)                                   20  0.174321
    4 ETW000  [     dev trc,00000]    CURSOR C_0001 FETCH (xcnt=1) on connection 0                            20  0.174341
    4 ETW000&

    Hi,
    Could you check for SAP Note   1952701 - DBSL supports new HANA version number
    Regards,
    Gaurav

  • Ive been trying to update my macbook pro 8,2 firmware from the apple website but first the smc update gives me an error saying that my software does not support that update and belive me i checked and iam downloading the correct one

    so basically i was wanting to update my smc firmware and the EFI Boot ROM version but for the EFI Boot Rom when i click on it says page no found and for the smc firmware, when i do download it says that the my software does not support it, even though it is completely compatible, i checked the system requirements given by the page.
    iam trying to do this because i have issues with the chargin, it keeps giving me a "not charging" messege.
    Help please...

    SadisticIron wrote:
    i just baught my first iphone and it is a jalbroken
    Buzz! Thank you for playing!
    Discussing jailbroken devices is forbidden here by the Terms of Service.
    You can not get help here.

Maybe you are looking for

  • Duplex printing with the MG3150

    I have a 36 page document which is A4 in size folding to A5 and I want to print it out as a finished file and I was wonderig if anyone has any information about the duplex feature with the Canon MG3150. Basically the printer is printing both sides of

  • Can I startup the Powerbook from an Iomega external CD burner?

    Can I startup the Powerbook from an Iomega external CD burner? We no longer have the removable internal drive. The computer will not start up, and I need to start it up on a utility CD from an external drive, but I've been unsuccessful so far. The ex

  • Cfmap not displaying marker

    Using cfmap in version 9.02 to work with Google maps v3. Location is displayed correctly.  Address is obtained from a query Cannot obtain a marker on the map using below code.             <cfmap             centeraddress="#google_address#"           

  • Forecast Horizon issue

    Dear Experts, Please share your experience in using the Forecast Horizon field under SNP2 tab in product master (MAT1) in APO. Apparently in our case, the Forecast (FA) covered by the defined forecast horizon is being deleted. Questions are: 1. What

  • Accessing Video File within .Jar

    Ok, I am creating a project where I am using JMF to display several pre-created videos. The finished project is going to be placed on a cd and submitted in a contest. Because of this, I am compiling the finished project into an executable .jar file.