RD340 BMC Password

I have a RD340 that I am setting up for a customer.
I set the BMC port to dedicated on  a static IP address.
When I point a browser at the port I get the login screen.
I have tried lenovo , lenovo 
and len0vO, len0vO
also root and superpuser.
I can not login to the BMC. Is there a new default password or is there a way to reset the usernames like on intel's version.
I have also tried IE, foxfire and chrome. BMC does not let me login.
Solved!
Go to Solution.

Hello,
Yes, it is possible to change / reset the BMC username / password.  Please follow the instructions here to change the login information. 

Similar Messages

  • BMC Password default

    I have a Lenovo server RD330.
    I have set up a port to use the BMC.
    What is the default password for this. I asume the user is admin what is the default password.
    Thanks.
    Solved!
    Go to Solution.

    Good Afternoon:
    I can't access with the server using lenovo\lenovo...How I can reset this passsword to another one.
    Thank's

  • Why are there no BMC discounts on qualifying pieces for 2 ASF entry points?

    I've had no luck whatsoever trying to log a case for support, I can't navigate the already cumbersome SAP Support Portal without getting errors so I thought I would try the forums... this is my first post:
    I have a Standard Automated Letter (rate category regular) Presort, there is nothing unusual about its setup but the results seem to be incorrect: some pieces aren't getting appropriate DBMC discounts.
    About the presort job and the output results:
    u2022 contains all possible BMC & ASF entry points
    u2022 output for all entry points look good EXCEPT for 2 ASFs: ASF-BUFFALO and ASF-OKLAHOMA CITY
    u2022 the Postage Statement shows that all pieces that qualify for those 2 ASFs are not getting the DBMC discount (Entry Rate="None" for those pieces), although based on the ZIP ranges they appear to qualify for the discount
    u2022 I double checked each of these 2 ASFs on USPS's FAST site to verify the ZIP ranges
    other details:
    u2022 currently using Presort Views 7.90c, Revision 3 (with Engine Revision 4)
    u2022 each entry point not getting the discount has 1 Mixed AADC tray (I posted AP.Ctn_Level to the output files for ease of finding this out), however I'm not sure why this would affect any discounts
    u2022 if Mixed AADC trays ARE what's causing the discount to not apply then I believe Presort is not processing these pieces correctly
    As a test to see if the output would be different I changed a setting that I've never had to change before: I reran the presort with the ENTRY POINT TYPE changed (for only the 2 ASFs in question) from ASF to BMC-- the resulting Postage Statement shows almost all pieces in these ASFs (except 34 Mixed AADC pieces in ASF-BUFFALO) are now getting the DBMC discount! This may serve as some sort of workaround but I don't believe the results are 100% correct, the Entry Point Type for ASFs should be set to ASF otherwise the information in the Mail.dat files may cause a problem.
    A couple more things to note just in case they affect anything: the presort is using a Basic Service IMB, and the scheme that these ASFs are qualifying under is Letter Trays on Pallets.
    Is the output from Presort actually incorrect, or is there a setting (something that won't affect the other entry points) that can to be changed so the output will be correct?

    Roy,
    We are aware of an issue with relabing BMC pallets to get the correct discounts in 7.90.  There are some work arounds for this until it is corrected in the software.  In order to give you the best work around for your job please open a support case.  Below are the steps to create a message for support.
    To log a case go to the SAP Service Market Place
    1. Go to http://service.sap.com.
    2. Click on SAP Support Portal.
    3. Enter your S-User ID and password and click u201COKu201D.
    4. Click u201COKu201D on digital certificate.
    5. Enter your S-User ID and password again and click OK.
    6. Click OK on the following screen.
    7. (This step is Optional) Setting up your Single Sign-on allows the site to remember your login and not prompt for it so frequently. To do this, click my Profile at the top of the page. Then click Maintain my Single Sign-on Certificate on the left of the page and follow the instructions.
    8. After the Single Sign-On, Click on Help & Support and click Report a Product Error. Under System Search, click the drop down arrow next to your installation and choose your system, and click Search and then click on the BOB link.
    9. When creating a SAP message it is required to search for Notes. (Knowledge Base articles) to see if you can find an answer to your question without having to log the message for support. In the Search Terms area, type your question and click Continue.
    10. If you do not see any Notes pertaining to your question click on Create Message.
    11. Choose the correct Component for the product you are creating the message for. The component is the support Q that your call will go into so the correct team can assist you. To do this click on the icon next to the icon next to the Component window to see a drop down list.
    12. Click the arrow by BOJ-EIM to see a more detailed list. By each component the names of the u201Cproductsu201D you are using are listed. Choosing the correct component will get your Message logged for the correct support team.
    For example:
    a. BOJ-EIM-COR is used for ACE, DataRight IQ, Match/Consolidate, IACE, and FirstPrep products.
    b. BOJ-EIM-COM is used for DeskTop Mailer, Business Edition, Presort, PrintForm, Label Studio
    c. BOJ-EIM-DEP is used for DQXI, Data Insight, eDQ Infa, SAP Siebel, PSFT, Oracle, Rapid Library
    d. BOJ-EIM-DF is used for Data Federator
    e. BOJ-EIM-DI is used for Data Integrator, Text Analysis, Data Services
    f. BOJ-EIM-DS is used for Data Services, Fazi/Fuzzy
    g. BOJ-EIM-MD is used for Metadata Manager and Composer
    h. BOJ-EIM-RMA is used for RapidMarts, BOW
    13. After choosing the component, fill in any remaining required/optional items. **Required fields under Problem Details are flagged with a red asterisk.
    · In the Short Text box, enter a brief description of the question or issue.
    · In the Long Text box, you can go into further detail about what you are seeing or questioning.
    · On this page also you can select to attach files if needed (please zip your files).
    · When you are finished you can either click on Save Message or Send Message. If you click on Save
      Message, the message WILL NOT be sent to support, it will remain in the Draft section of your u201Cmy      
      Inboxu201D for you to send later.
    · If you want to send the message to technical assurance now click Send Message.
    · You can see the messages you have u201Csentu201D to support by clicking My Inbox and viewing your Sent
       Items.
    Thanks,
    Kendra

  • BMC Remedy and SAP integration question

    Hello Gurus,
    My client would like to integrate BMC Remedy and SAP via Web Services, The steps we took to achieve this were:
    1) Went into BMC Remedy Developers studio and created a WSDL file with the selected forms we would like to pull into SAP
    2) Tested this in SOAPUI 4.0 which worked perfectly and gave us the results we were looking for
    3) Went into SAP, Created Proxy in SE80 using the WSDL file, Created port in LPCONFIG and activated
    When we go to test this is SE80 however and we input the same parameters that are in SOAPUI 4.0 we are getting the error below:
    SOAP:1001 CX_SXML_PARSE_ERROR:SXML reader/writer exception. Error while parsing on the XML stream: undeclared Namespace
    To me it appears that SAP is having an issue reading the URN instead of Http but that is what BMC is spitting out when you create a WSDL file in thier BMC developers studio
    Here is my WSDL file below and is there something that needs to be changed in this file so that SAP can parse the information??
      <?xml version="1.0" encoding="UTF-8" ?>
    - <wsdl:definitions targetNamespace="urn:WSDL_CRQ_TM_BADI" xmlns:s0="urn:WSDL_CRQ_TM_BADI" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
    - <wsdl:types>
    - <xsd:schema elementFormDefault="qualified" targetNamespace="urn:WSDL_CRQ_TM_BADI">
      <xsd:element name="New_GetList_Operation_0" type="s0:InputMapping1" />
    + <xsd:complexType name="InputMapping1">
    - <xsd:sequence>
      <xsd:element name="Qualification" type="xsd:string" />
      <xsd:element name="startRecord" type="xsd:string" />
      <xsd:element name="maxLimit" type="xsd:string" />
      </xsd:sequence>
      </xsd:complexType>
      <xsd:element name="New_GetList_Operation_0Response" type="s0:OutputMapping1" />
    - <xsd:complexType name="OutputMapping1">
    - <xsd:sequence>
      <xsd:element minOccurs="0" name="Request_id" type="xsd:string" />
      <xsd:element name="Change_Req_Status" type="s0:Change_Req_StatusType" />
      <xsd:element name="Description" type="xsd:string" />
      </xsd:sequence>
      </xsd:complexType>
    - <xsd:simpleType name="Change_Req_StatusType">
    - <xsd:restriction base="xsd:string">
      <xsd:enumeration value="Draft" />
      <xsd:enumeration value="Request For Authorization" />
      <xsd:enumeration value="Request For Change" />
      <xsd:enumeration value="Planning In Progress" />
      <xsd:enumeration value="Scheduled For Review" />
      <xsd:enumeration value="Scheduled For Approval" />
      <xsd:enumeration value="Scheduled" />
      <xsd:enumeration value="Implementation In Progress" />
      <xsd:enumeration value="Pending" />
      <xsd:enumeration value="Rejected" />
      <xsd:enumeration value="Completed" />
      <xsd:enumeration value="Closed" />
      <xsd:enumeration value="Cancelled" />
      </xsd:restriction>
      </xsd:simpleType>
      <xsd:element name="AuthenticationInfo" type="s0:AuthenticationInfo" />
    - <xsd:complexType name="AuthenticationInfo">
    - <xsd:sequence>
      <xsd:element name="userName" type="xsd:string" />
      <xsd:element name="password" type="xsd:string" />
      <xsd:element minOccurs="0" name="authentication" type="xsd:string" />
      <xsd:element minOccurs="0" name="locale" type="xsd:string" />
      <xsd:element minOccurs="0" name="timeZone" type="xsd:string" />
      </xsd:sequence>
      </xsd:complexType>
      </xsd:schema>
      </wsdl:types>
    - <wsdl:message name="New_GetList_Operation_0SoapIn">
      <wsdl:part element="s0:New_GetList_Operation_0" name="parameters" />
      </wsdl:message>
    - <wsdl:message name="New_GetList_Operation_0SoapOut">
      <wsdl:part element="s0:New_GetList_Operation_0Response" name="parameters" />
      </wsdl:message>
    - <wsdl:message name="ARAuthenticate">
      <wsdl:part element="s0:AuthenticationInfo" name="parameters" />
      </wsdl:message>
    - <wsdl:portType name="New_Port_0PortType">
    - <wsdl:operation name="New_GetList_Operation_0">
      <wsdl:input message="s0:New_GetList_Operation_0SoapIn" />
      <wsdl:output message="s0:New_GetList_Operation_0SoapOut" />
      </wsdl:operation>
      </wsdl:portType>
    - <wsdl:binding name="New_Port_0SoapBinding" type="s0:New_Port_0PortType">
      <soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http" />
    - <wsdl:operation name="New_GetList_Operation_0">
      <soap:operation soapAction="urn:WSDL_CRQ_TM_BADI/New_GetList_Operation_0" style="document" />
    - <wsdl:input>
      <soap:header message="s0:ARAuthenticate" part="parameters" use="literal" />
      <soap:body use="literal" />
      </wsdl:input>
    - <wsdl:output>
      <soap:body use="literal" />
      </wsdl:output>
      </wsdl:operation>
      </wsdl:binding>
    - <wsdl:service name="WSDL_CRQ_TM_BADIService">
    - <wsdl:port binding="s0:New_Port_0SoapBinding" name="New_Port_0Soap">
      <soap:address location="http://phl-sbx207:8080/arsys/services/ARService?server=PHL-SBX207&webService=WSDL_CRQ_TM_BADI" />
      </wsdl:port>
      </wsdl:service>
      </wsdl:definitions>
    Edited by: David Milano on Aug 9, 2011 8:23 PM
    Edited by: David Milano on Aug 9, 2011 8:25 PM
    Edited by: David Milano on Aug 9, 2011 8:26 PM

    Here is my WSDL file below and is there something that needs to be changed in this file so that SAP can parse the information??
      <?xml version="1.0" encoding="UTF-8" ?>
    - <wsdl:definitions targetNamespace="urn:WSDL_CRQ_TM_BADI" xmlns:s0="urn:WSDL_CRQ_TM_BADI" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
    - <wsdl:types>
    - <xsd:schema elementFormDefault="qualified" targetNamespace="urn:WSDL_CRQ_TM_BADI">
      <xsd:element name="New_GetList_Operation_0" type="s0:InputMapping1" />
    + <xsd:complexType name="InputMapping1">
    - <xsd:sequence>
      <xsd:element name="Qualification" type="xsd:string" />
      <xsd:element name="startRecord" type="xsd:string" />
      <xsd:element name="maxLimit" type="xsd:string" />
      </xsd:sequence>
      </xsd:complexType>
      <xsd:element name="New_GetList_Operation_0Response" type="s0:OutputMapping1" />
    - <xsd:complexType name="OutputMapping1">
    - <xsd:sequence>
      <xsd:element minOccurs="0" name="Request_id" type="xsd:string" />
      <xsd:element name="Change_Req_Status" type="s0:Change_Req_StatusType" />
      <xsd:element name="Description" type="xsd:string" />
      </xsd:sequence>
      </xsd:complexType>
    - <xsd:simpleType name="Change_Req_StatusType">
    - <xsd:restriction base="xsd:string">
      <xsd:enumeration value="Draft" />
      <xsd:enumeration value="Request For Authorization" />
      <xsd:enumeration value="Request For Change" />
      <xsd:enumeration value="Planning In Progress" />
      <xsd:enumeration value="Scheduled For Review" />
      <xsd:enumeration value="Scheduled For Approval" />
      <xsd:enumeration value="Scheduled" />
      <xsd:enumeration value="Implementation In Progress" />
      <xsd:enumeration value="Pending" />
      <xsd:enumeration value="Rejected" />
      <xsd:enumeration value="Completed" />
      <xsd:enumeration value="Closed" />
      <xsd:enumeration value="Cancelled" />
      </xsd:restriction>
      </xsd:simpleType>
      <xsd:element name="AuthenticationInfo" type="s0:AuthenticationInfo" />
    - <xsd:complexType name="AuthenticationInfo">
    - <xsd:sequence>
      <xsd:element name="userName" type="xsd:string" />
      <xsd:element name="password" type="xsd:string" />
      <xsd:element minOccurs="0" name="authentication" type="xsd:string" />
      <xsd:element minOccurs="0" name="locale" type="xsd:string" />
      <xsd:element minOccurs="0" name="timeZone" type="xsd:string" />
      </xsd:sequence>
      </xsd:complexType>
      </xsd:schema>
      </wsdl:types>
    - <wsdl:message name="New_GetList_Operation_0SoapIn">
      <wsdl:part element="s0:New_GetList_Operation_0" name="parameters" />
      </wsdl:message>
    - <wsdl:message name="New_GetList_Operation_0SoapOut">
      <wsdl:part element="s0:New_GetList_Operation_0Response" name="parameters" />
      </wsdl:message>
    - <wsdl:message name="ARAuthenticate">
      <wsdl:part element="s0:AuthenticationInfo" name="parameters" />
      </wsdl:message>
    - <wsdl:portType name="New_Port_0PortType">
    - <wsdl:operation name="New_GetList_Operation_0">
      <wsdl:input message="s0:New_GetList_Operation_0SoapIn" />
      <wsdl:output message="s0:New_GetList_Operation_0SoapOut" />
      </wsdl:operation>
      </wsdl:portType>
    - <wsdl:binding name="New_Port_0SoapBinding" type="s0:New_Port_0PortType">
      <soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http" />
    - <wsdl:operation name="New_GetList_Operation_0">
      <soap:operation soapAction="urn:WSDL_CRQ_TM_BADI/New_GetList_Operation_0" style="document" />
    - <wsdl:input>
      <soap:header message="s0:ARAuthenticate" part="parameters" use="literal" />
      <soap:body use="literal" />
      </wsdl:input>
    - <wsdl:output>
      <soap:body use="literal" />
      </wsdl:output>
      </wsdl:operation>
      </wsdl:binding>
    - <wsdl:service name="WSDL_CRQ_TM_BADIService">
    - <wsdl:port binding="s0:New_Port_0SoapBinding" name="New_Port_0Soap">
      <soap:address location="http://phl-sbx207:8080/arsys/services/ARService?server=PHL-SBX207&webService=WSDL_CRQ_TM_BADI" />
      </wsdl:port>
      </wsdl:service>
      </wsdl:definitions>
    Edited by: David Milano on Aug 9, 2011 8:23 PM
    Edited by: David Milano on Aug 9, 2011 8:25 PM

  • Persistent bug in x6250 ELOM - changing password breaks blade

    Has anyone else been dealing with the problem in BMC v 4.0.36 and 4.0.45 where changing the root password from "changeme" (sic) to something else renders the blade unbootable? We've had to replace two blades due to this bug, and support seems not to be actively researching the issue. v.4.0.30 didn't have this problem.

    Well, some good news at last. I think I solve the problem with BL0.
    I loaded an older firmware with load command, at end it yeild the same error about not being able to write the BIOS, but rest of the firmware was loaded. Then I try to load back the actual one ..... and surprise this time the installation finished OK.
    -> version
    SP firmware 2.0.3.6
    SP firmware build number: 36946
    SP firmware date: Mon Sep 15 12:46:49 PDT 2008
    SP filesystem version: 0.1.17
    -> load -source tftp://128.90.43.111/ilom.X6250-2.0.3.6-r38189.pkg
    NOTE: A firmware upgrade will cause the server and ILOM to
          be reset. It is recommended that a clean shutdown of
          the server be done prior to the upgrade procedure.
          An upgrade takes about 6 minutes to complete. ILOM
          will enter a special mode to load new firmware. No
          other tasks can be performed in ILOM until the
          firmware upgrade is complete and ILOM is reset.
    Are you sure you want to load the specified file (y/n)? y
    Do you want to preserve the configuration (y/n)? n
    Firmware update is complete.
    ILOM will now be restarted with the new firmware.
    -> /sbin/reboot
    login as: root
    Using keyboard-interactive authentication.
    Password:
    Access denied
    Using keyboard-interactive authentication.
    Password:
    Sun(TM) Integrated Lights Out Manager
    Version 2.0.3.6
    Copyright 2008 Sun Microsystems, Inc. All rights reserved.
    Use is subject to license terms.
    Warning: password is set to factory default.
    -> version
    SP firmware 2.0.3.6
    SP firmware build number: 38189
    SP firmware date: Thu Oct 16 03:27:04 CST 2008
    SP filesystem version: 0.1.17

  • Default Encrypted  Password

    Dear All,
    i want to insert encrypted Password of 'password' string into table user_dtl column PASSWORD .
    How can i insert Encripted password into table.
    Thanks

    Hi Vedant,
    See the CUSTOM_HASH function that is installed with sample application in the APEX.
    Here is the code for it:
    create or replace function custom_hash (p_username in varchar2, p_password in varchar2)
    return varchar2
    is
      l_password varchar2(4000);
      l_salt varchar2(4000) := 'XFSPL28ZTWEWWM6FHWMK68AG5NQVLU';
    begin
    -- This function should be wrapped, as the hash algorithm is exposed here.
    -- You can change the value of l_salt or the method of which to call the
    -- DBMS_OBFUSCATOIN toolkit, but you much reset all of your passwords
    -- if you choose to do this.
    l_password := utl_raw.cast_to_raw(dbms_obfuscation_toolkit.md5
      (input_string => p_password || substr(l_salt,10,13) || p_username ||
        substr(l_salt, 4,10)));
    return l_password;
    end;
    i want to insert encrypted Password of 'password' string into table user_dtl column PASSWORD.The above function will give the encrypted password which can be inserted into USER_DTL as follows:
    INSERT INTO USER_DTL(USERNAME,PASSWORD) VALUES(:P1_USERNAME, CUSTOM_HASH(:P1_USERNAME,:P1_PASSWORD))Be sure that PASSWORD column in USER_DTL is of type VARCHAR2 and of adequate length as to accommodate the encrypted password.
    Hope it helps!
    Regards,
    Kiran

  • Installed adobe but password won't work to read on tablet

    Installed reader and adobe on new tablet, but adobe password will not work to let me read. I reset
    Password but that doesn't help

    A password protected PDF?  How did you reset it?
    What's the operating system on that tablet?

  • TS2446 My phone want let me download apps I put the password in then it's say billing options which tell me I have invalid security code

    My phone want let me download any apps when I put the password in it take me to billing option which tell me I have the wrong security code and that's the security code that was on the card on the account

    iTunes Store: My credit card's security code or zip code does not match my bank's records
    http://support.apple.com/kb/TS1646

  • HT4623 MY i phone 5 wont let me download apps etc it just keeps asking for my apple id password?

    Juat got my i phone 5 today and have opened an apple accout but it wont let me download apps etc just keeps asking for a password over and over again???

    Try This...
    Close All Open Apps... Sign Out of your Account...  Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • It seems when i try to login to Netflix it comes back with email id or password is incorrect (code 117), i can't find anything to fix this, help!!!

    I've tried everything, reset, unplug, even have it connected via Ethernet, always the same outcome!  I can login on our iMac with no problem!

    Finally someone who found the solution. I've been searching for the answer for a while, some people suggest resetting the Apple TV, reverting to the previous firmware, changing password to all numbers, you name it.
    The right answer is: make sure to have a password with both letters and numbers. Someone at Apple must have thought to override the password requirements of Netflix, without telling anyone else. They need better change management procedures!

  • SRM 5.0 - how to change default password?

    Hello,
    Am trying to install SRM 5.0 Oracle 10g as the DB. In the instllation doc of SRM 5.0 a default password is given to connect to the database and I see the encrypted password is in the jdbc properties. How can we change the default password? How do I get the encrypted value?
    Any help is appreciated.
    Thanks

    Propblem resovled, find the corresponding function group and screen, then change the translation.

  • SSL private key password

    Hello everyone,
    I'm trying to upgrade a WLS 6.1 SP2 with WLP 4.0 SP2 instance to WLS 7.0 SP2
    with WLP 7.0 SP2. Everythng is fine except for that we cannot use the same
    SSL certificate. By defaul the private key is not encrypted with password
    (SSL.KeyEncrypted = false by default, according to the documentations) in
    both WLS 6.1 and WLS 7.0. But running WLS 7.0 startup script results the
    following error:
    <Sep 17, 2003 5:06:40 PM HST> <Alert> <WebLogicServer> <000297>
    <Inconsistent se
    curity configuration, java.lang.Exception: Cannot read private key from file
    C:\
    bea7\user_projects\agencyPortal\portal_islandinsurance_com-key.der. Make
    sure pa
    ssword specified in environment property weblogic.management.pkpassword is
    valid
    .>
    java.lang.Exception: Cannot read private key from file
    C:\bea7\user_projects\age
    ncyPortal\portal_islandinsurance_com-key.der. Make sure password specified
    in en
    vironment property weblogic.management.pkpassword is valid.
    at
    weblogic.security.service.SSLManager.getServerPrivateKey(SSLManager.j
    ava:434)
    at weblogic.t3.srvr.SSLListenThread.<init>(SSLListenThread.java:153)
    at weblogic.t3.srvr.SSLListenThread.<init>(SSLListenThread.java:122)
    at weblogic.t3.srvr.T3Srvr.initializeListenThreads(T3Srvr.java:1513)
    at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:852)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:295)
    at weblogic.Server.main(Server.java:32)
    Is this happening because the private key is actually encrypted with the
    password? It was working, although the KeyEncrypted is not set to true and
    the startup script for WLS 6.1 instance did have a line
    with -Dweblogic.management.pkpassword. Or could this error be result of
    something else? The physical machine the instances are located is the same
    and IP address and the DNS entry hasn't been changed, either.
    Any insight will be greatly appreciated. Thanks!
    Makoto

    Thanks Tony - it worked!!
    "Tony" <TonyV> wrote in message news:[email protected]...
    It may be because the private key is both unprotected and in DER format.
    There are some things to try:
    1) Convert the private key file from a DER file to a PEM file and try
    that:
    a) Follow the for converting an unprotected private key at:
    http://e-docs.bea.com/wls/docs70/adminguide/utils.html#1143743
    b) Look at the resulting PEM file, it should look something like
    this:
    -----BEGIN RSA PRIVATE KEY-----
    -----END RSA PRIVATE KEY-----
    (Be sure there is no extra lines or whitespace after thefooter)
    >
    c) Change your configuration to point at the PEM file
    If that doesn work, then you can try protecting the key with apassword
    using
    the wlkeytool utility (It should be in the server/bin directory). The
    tool should prompt
    for a password to use to protect it:
    wlkeytool inputkey.pem outputkey.pem
    Then change your configuration to use the protected private key, andset
    the passwod to use.
    Tony
    "Makoto Suzuki" <[email protected]> wrote in message
    news:[email protected]...
    Hello everyone,
    I'm trying to upgrade a WLS 6.1 SP2 with WLP 4.0 SP2 instance to WLS 7.0SP2
    with WLP 7.0 SP2. Everythng is fine except for that we cannot use the
    same
    SSL certificate. By defaul the private key is not encrypted withpassword
    (SSL.KeyEncrypted = false by default, according to the documentations)in
    both WLS 6.1 and WLS 7.0. But running WLS 7.0 startup script resultsthe
    following error:
    <Sep 17, 2003 5:06:40 PM HST> <Alert> <WebLogicServer> <000297>
    <Inconsistent se
    curity configuration, java.lang.Exception: Cannot read private key fromfile
    C:\
    bea7\user_projects\agencyPortal\portal_islandinsurance_com-key.der. Make
    sure pa
    ssword specified in environment property weblogic.management.pkpassword
    is
    valid
    .>
    java.lang.Exception: Cannot read private key from file
    C:\bea7\user_projects\age
    ncyPortal\portal_islandinsurance_com-key.der. Make sure passwordspecified
    in en
    vironment property weblogic.management.pkpassword is valid.
    at
    weblogic.security.service.SSLManager.getServerPrivateKey(SSLManager.j
    ava:434)
    atweblogic.t3.srvr.SSLListenThread.<init>(SSLListenThread.java:153)
    atweblogic.t3.srvr.SSLListenThread.<init>(SSLListenThread.java:122)
    atweblogic.t3.srvr.T3Srvr.initializeListenThreads(T3Srvr.java:1513)
    at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:852)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:295)
    at weblogic.Server.main(Server.java:32)
    Is this happening because the private key is actually encrypted with the
    password? It was working, although the KeyEncrypted is not set to true
    and
    the startup script for WLS 6.1 instance did have a line
    with -Dweblogic.management.pkpassword. Or could this error be result of
    something else? The physical machine the instances are located is thesame
    and IP address and the DNS entry hasn't been changed, either.
    Any insight will be greatly appreciated. Thanks!
    Makoto

  • RBACx Encrypted Password Change Utility

    Hi all,
    In the OIA/SRM installation guide, there is a reference to a tool, to find out the password of rbacxservice.
    "Oracle Identity Analytics utilizes an encrypted password when communicating with the database.
    To change the default database password, use the RBACx Encrypted Password Change Utility"
    Could you please help me finding out this tool.
    Many thanks in advance.
    Warm regards,
    Manipradeep Sunku.

    The mentioned tool only encrypts the password so that you don't have to store a plain text password in the config file. It does not decrypt it. The default rbacxservice password is rbacxservice.
    The tool does not come with the OIA/SRM distribution so if you need it, you will need to contact support.

  • ACS 5.3 Default Backup Password

    When doing a backup on any of the ACS 5.x appliances by default the backup is encrypted with PGP. What password is used for that? Is it configurable?

    It is not configurable and that information wasnt made public. However, when you restore it should be able to decrypt it just fine.
    You can try opening a TAC case but when I was in TAC wasnt able to find that key either.
    Thanks,
    Tarik Admani
    *Please rate helpful posts*

  • How to change the default JET (JumpStart) password

    I am using JET (Jumpstart Enterprise Toolkit) to jumpstart my servers. The default password, boajrOmU7GFmY, is saved in a encrypted form in jumpstart.conf. I want to change it, how do I know the encrypted form of my new password?
    Tom

    Usage: orapwd file=<fname> password=<password> entries=<users>
    where
    file - name of password file (mand),
    password - password for SYS and INTERNAL (mand),
    entries - maximum number of distinct DBA and OPERs (opt),
    There are no spaces around the equal-to (=) character.

Maybe you are looking for