RDA Datasource problem
THis is my first attempt at an RDA Extractor. THe problem I am getting is that the daemon job is failing with the message in the job log, "Error during extraction: 0 rowa in l_t_tid, 0 rows in l_t_data - Message RSCRT 360.
Here's how I got to this point:
1) Wrote an ABAP in ECC to set the REALTIME to 'X' for this CO-PA datasource (<- Not sure this is even possible for a CO-PA extractor)
2) Replicated the DS into BI 7
3) Created a transformation and DTP.
4) Created an infopack to initialize deltas and ran it (Successfully)
5) Created an RDA enabled infopack and assigned a daemon to it.
Never could get it to work
Similar Messages
-
DataSource problems after BW upgrade
DataSource problems after BW upgrade
Upgrade from
SAP NetWeaver 2004s: SAP_BW 700 0012 SAPKW70012
to
SAP EHP 1 for SAP NetWeaver 7.0: SAP_BW 701 0007 SAPKW70107
BW system: PI_BASIS 7.01 SP 6
ECC/source system: PI_BASIS 2005_1_700 SP 11
Problem exists throughout, both with generic and standard DataSources.
Here is one specific example:
Generic DataSource ZXXXXXXXX
InfoPackage "ZXXXXXXXX(ZXXXXXXXX)" does not run. Error:
DataSource ZXXXXXXXX(SOURCESYS) must be activated
Message no. RSDS179
Then followed these steps:
1. Replicate Metadata from source system
2. Report RSDS_DATASOURCE_ACTIVATE_ALL from SE38 for source system SOURCESYS and DataSource ZXXXXXXXX
Errors returned:
Inconsistent user object ZXXXXXXXX SOURCESYS for PSA /BIC/B000XXXX
Error saving DataSource ZXXXXXXXX SOURCESYS
DataSource ZXXXXXXXX (SOURCESYS) could not be activated
When I try to choose "Manage" from the context menu for the DataSource, I see an error:
Invalid DataStore object name /BIC/B000XXXX: Reason: No valid entry in table RSTS
Message no. RSM1294
The following notes have not helped:
https://service.sap.com/sap/support/notes/1377274
https://service.sap.com/sap/support/notes/1383711
https://service.sap.com/sap/support/notes/1489064
https://service.sap.com/sap/support/notes/1056060
And no other SDN threads seem to give fruitful suggestions.
Any ideas?Hi,
Just to help the folks out here.
In my case,
Inspite of going through several valid NOTES & program, my issue didnt resolve (you reply was pretty accurate - but dint help me :-)).
I have resolved the issue by adjusting the PSA table for the same.
Procedure:
Take the psa name --> go to table rstsods --> find the ODSNAME_TECH name for the relevant psa --> se38 t.code --> enter ODSNAME_TECH and click on 'adjust & activate database table' (make sure you have selected 'save data' radio button.
Just in case anyone who come across this problem, can do the above steps.
Regards,
Dubbu. -
Hi,
I am using a RDA DataSource to capture messages from a XI System.
I am using also a RDA ODS, I mean the data is update
XI -> PSA -> ODS
for some reason I got the situation that PSA is updated but ODS not.
Daemon stops and I anot able to reactivated because :
"Request ### no yet loaded in target <ODS Name>"
There is some possibility to load those request in ODS ?
if I fry to create other DTP I got a conflict with the existing one...
I am not sure if if changeing to a STADARD DTP will help...and if I will be able to change again in a RDA DTP..
I am going to appreciate any help
FedeXok . I misunderstood your question. Help me understand this better -
So, when the Daemon is active and running - data comes to PSA but doesn't update the DTP ? If so, do you see the request in ODS in Yellow or Red status ? Does Daemon stop at this point?
Note: We have a similar setup and it is working fine.
BTW, have you tried repairing the DTP ? It changes it to standard DTP and you can always go back to Realtime DTP -
External datasource problem(tns error)
hi,
i got and error while working with external datasource in BAM architect, how to fix it? Moreover i got tns error when i use tnsping utility for my XE db from command prompt
======================================
C:\Documents and Settings\rehanfa>tnsping xe
TNS Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production on 06-JUN-2
008 15:26:18
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
C:\OracleBAM\ClientForBAM\network\admin\sqlnet.ora
TNS-03505: Failed to resolve name
======================================
and BAM archtect error while viewing contents of data model based on this external datasource
========================================
ADC Server exception in OpenViewset().
Details <<
ADC Server exception in OpenViewset().
Source: "ActiveDataCache" ID: "ADCServerException"
ERROR [08001] [Microsoft][ODBC driver for Oracle][Oracle]ORA-12154: TNS:could not resolve the connect identifier specified ERROR [IM006] [Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed ERROR [01000] [Microsoft][ODBC Driver Manager] The driver doesn't support the version of ODBC behavior that the application requested (see SQLSetEnvAttr).
Source: ""
Internal debugging information >>
Oracle.BAM.ActiveDataCache.Common.Exceptions.CacheException: ADC Server exception in OpenViewset(). ---> System.Data.Odbc.OdbcException: ERROR [08001] [Microsoft][ODBC driver for Oracle][Oracle]ORA-12154: TNS:could not resolve the connect identifier specified
ERROR [IM006] [Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed
ERROR [01000] [Microsoft][ODBC Driver Manager] The driver doesn't support the version of ODBC behavior that the application requested (see SQLSetEnvAttr).
at System.Data.Odbc.OdbcConnection.Open()
at Oracle.BAM.ActiveDataCache.ExternalDataSources.ODBC.Open(String strXml)
at Oracle.BAM.ActiveDataCache.Kernel.Datasets.ExternalStorageEngine.GetDataReader(DSEQuery oDseQuery)
at Oracle.BAM.ActiveDataCache.Kernel.Viewsets.Utilities.ExternalData.DataImporter.ExecuteQuery()
at Oracle.BAM.ActiveDataCache.Kernel.Viewsets.Utilities.ExternalData.ExternalDataManager.ImportExternalData(String strDatasetID, String strTempName, FilterExpression filter)
at Oracle.BAM.ActiveDataCache.Kernel.Viewsets.Utilities.ExternalData.ExternalDataManager.ImportExternalFactData()
at Oracle.BAM.ActiveDataCache.Kernel.Viewsets.Utilities.ExternalData.ExternalDataManager.GetExternalData()
at Oracle.BAM.ActiveDataCache.Kernel.Viewsets.Viewset.LoadData()
at Oracle.BAM.ActiveDataCache.Kernel.Viewsets.ViewsetBase.Initialize()
at Oracle.BAM.ActiveDataCache.Kernel.Viewsets.Viewset.Initialize()
at Oracle.BAM.ActiveDataCache.Kernel.Viewsets.ViewsetBase.Open()
at Oracle.BAM.ActiveDataCache.Kernel.Viewsets.ViewsetManager.InitViewset(Modifier oModifier, ViewsetOptions oViewsetOptions, Boolean bSynchronized, Int32 iTransactionID)
at Oracle.BAM.ActiveDataCache.Kernel.Viewsets.ViewsetManager.OpenViewset(Modifier modifier, ViewsetOptions options, Int32 iTransactionID)
at Oracle.BAM.ActiveDataCache.Kernel.Server.DataStoreServer.OpenViewset(Modifier modifier, ViewsetOptions options, Int32 iTransactionID)
--- End of inner exception stack trace ---
Server stack trace:
at Oracle.BAM.ActiveDataCache.Kernel.Server.DataStoreServer.OpenViewset(Modifier modifier, ViewsetOptions options, Int32 iTransactionID)
at System.Runtime.Remoting.Messaging.StackBuilderSink.PrivateProcessMessage(MethodBase mb, Object[] args, Object server, Int32 methodPtr, Boolean fExecuteInContext, Object[]& outArgs)
at System.Runtime.Remoting.Messaging.StackBuilderSink.SyncProcessMessage(IMessage msg, Int32 methodPtr, Boolean fExecuteInContext)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Oracle.BAM.ActiveDataCache.Common.Core.IDataStore.OpenViewset(Modifier oModifier, ViewsetOptions options, Int32 iTransactionID)
at Oracle.BAM.ActiveDataCache.Remoting.ServerWrapper.OpenViewset(Modifier oModifier, ViewsetOptions options, Int32 iTransactionID)
at Oracle.BAM.ActiveDataCache.Viewset.Open(Context ctxAdcContext, Modifier oModifier, ViewsetOptions options)
at Oracle.BAM.Architect.DataObjectsContents.InternalContentsByRowID(String strEventParam, Boolean bEdit, Int64 lHighlightRowID, Boolean bAddBegin)
==========================================================Dear, I am facing that problem and I need some help. please tell me how the issue was resolved
-
MX7 SQL SERVER Datasource problem
hello
I installed MX7 and I do not manage to create a datasource
which
point towards my dB MSSQL SERVER on local, it posts me this:
Connection verification failed for data source: blanko
java.sql.SQLException: [Macromedia][SQLServer JDBC
Driver]Error
establishing socket. Unknown host: (local)
The root cause was that: java.sql.SQLException:
[Macromedia][SQLServer
JDBC Driver]Error establishing socket. Unknown host: (local)
under Coldfiusion server 5.5 there was the possibility of
checked “Trusted connnection” and it had no prob with
MSQLSERVER there Apparently it is necessary to work with the JDBc
drivers but I do not have any idea of how to install it I am sure
that it is a traditional error, if somebody has already encountered
the problem,
thank you to light me
thks Sam
Configuration: Windows 2003 Internet Explorer 7.0I found why it did not recognize localhost, because I placed
(localhost) between bracket because on CF 5.5 it was the case for
(local), therefore now it recognizes apparently the localhost as
server but it is another problem now: it did not recognize the
username and password,
however I configured SQL SERVER 2005 in mixed mode and thus
I test with login: Administrator and password empty (because I
don't have password on Windows authentication) and I also test with
username: sa and my password admin but without success, here what
it indicates as error:
Connection verification failed for data source: blanko
java.sql.SQLException: [Macromedia][SQLServer JDBC
Driver]Error establishing socket. Connection refused: connect
The root cause was that: java.sql.SQLException:
[Macromedia][SQLServer JDBC Driver]Error establishing socket.
Connection refused: connect
in addition I do not know if there is a bond, (I work under
win 2003 standard edition) and according to what I read on the Net,
it may be that it is a problem of port, can be the port 1433 is not
open? If I make on DOS prompt: telnet localhost 1433 ==> failure
to connect whereas telnet localhost 80 works
I even tried to connect with
username: sa
pwd: mypwd
port: 80 (I know that 80 is the port for HTTP)
it posts the following message:
Connection verification failed for data source: blanko
java.sql.SQLException: [Macromedia][SQLServer JDBC Driver]No
more data available to read.
The root cause was that: java.sql.SQLException:
[Macromedia][SQLServer JDBC Driver]No more data available to read
thanks for your help -
Hi,
I have to load hierarchies from r/3 to BW.when i test my hierarchy DataSource in RSA6 number of records its showing is 40,where as my R/3 system has 45 records for the same hierarchy.Can any one please let me know why its showing different number of records and how to overcome this problem.Hi,
Thank for your suggestion, but it is not work, when i put my query the result is nothing display.
Another problem is i_que portion
SYS_CONNECT_BY_PATH() can only retrieve BLENDED_WGT level is only 2nd level. Actual Result_table of BLENDED_WGT display 3rd level.
I doubt is because of main select portion or all my query is wrong.
Thanks -
Hi
I have created an external datasource.I completed all steps as given in
http://www.oracle.com/technology/products/integration/bam/10.1.3/TechNotes/TechNote_BAM_ExternalDataSource.pdf
Problem is : While verifying data in BAM architect console it is giving error saying
ADC Server exception in OpenViewset().
Source: "ActiveDataCache" ID: "ADCServerException"
Format of the initialization string does not conform to specification starting at index 82.
Source: "System.Data".
what is the error in this kindly revert back
,Thankshi,
i get the same error, ho you fixed it.Moreover i get an tns error when i use tnsping utility for my XE db from command prompt
ADC Server exception in OpenViewset().
Details <<
ADC Server exception in OpenViewset().
Source: "ActiveDataCache" ID: "ADCServerException"
ERROR [08001] [Microsoft][ODBC driver for Oracle][Oracle]ORA-12154: TNS:could not resolve the connect identifier specified ERROR [IM006] [Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed ERROR [01000] [Microsoft][ODBC Driver Manager] The driver doesn't support the version of ODBC behavior that the application requested (see SQLSetEnvAttr).
Source: ""
Internal debugging information >>
Oracle.BAM.ActiveDataCache.Common.Exceptions.CacheException: ADC Server exception in OpenViewset(). ---> System.Data.Odbc.OdbcException: ERROR [08001] [Microsoft][ODBC driver for Oracle][Oracle]ORA-12154: TNS:could not resolve the connect identifier specified
ERROR [IM006] [Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed
ERROR [01000] [Microsoft][ODBC Driver Manager] The driver doesn't support the version of ODBC behavior that the application requested (see SQLSetEnvAttr).
at System.Data.Odbc.OdbcConnection.Open()
at Oracle.BAM.ActiveDataCache.ExternalDataSources.ODBC.Open(String strXml)
at Oracle.BAM.ActiveDataCache.Kernel.Datasets.ExternalStorageEngine.GetDataReader(DSEQuery oDseQuery)
at Oracle.BAM.ActiveDataCache.Kernel.Viewsets.Utilities.ExternalData.DataImporter.ExecuteQuery()
at Oracle.BAM.ActiveDataCache.Kernel.Viewsets.Utilities.ExternalData.ExternalDataManager.ImportExternalData(String strDatasetID, String strTempName, FilterExpression filter)
at Oracle.BAM.ActiveDataCache.Kernel.Viewsets.Utilities.ExternalData.ExternalDataManager.ImportExternalFactData()
at Oracle.BAM.ActiveDataCache.Kernel.Viewsets.Utilities.ExternalData.ExternalDataManager.GetExternalData()
at Oracle.BAM.ActiveDataCache.Kernel.Viewsets.Viewset.LoadData()
at Oracle.BAM.ActiveDataCache.Kernel.Viewsets.ViewsetBase.Initialize()
at Oracle.BAM.ActiveDataCache.Kernel.Viewsets.Viewset.Initialize()
at Oracle.BAM.ActiveDataCache.Kernel.Viewsets.ViewsetBase.Open()
at Oracle.BAM.ActiveDataCache.Kernel.Viewsets.ViewsetManager.InitViewset(Modifier oModifier, ViewsetOptions oViewsetOptions, Boolean bSynchronized, Int32 iTransactionID)
at Oracle.BAM.ActiveDataCache.Kernel.Viewsets.ViewsetManager.OpenViewset(Modifier modifier, ViewsetOptions options, Int32 iTransactionID)
at Oracle.BAM.ActiveDataCache.Kernel.Server.DataStoreServer.OpenViewset(Modifier modifier, ViewsetOptions options, Int32 iTransactionID)
--- End of inner exception stack trace ---
Server stack trace:
at Oracle.BAM.ActiveDataCache.Kernel.Server.DataStoreServer.OpenViewset(Modifier modifier, ViewsetOptions options, Int32 iTransactionID)
at System.Runtime.Remoting.Messaging.StackBuilderSink.PrivateProcessMessage(MethodBase mb, Object[] args, Object server, Int32 methodPtr, Boolean fExecuteInContext, Object[]& outArgs)
at System.Runtime.Remoting.Messaging.StackBuilderSink.SyncProcessMessage(IMessage msg, Int32 methodPtr, Boolean fExecuteInContext)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Oracle.BAM.ActiveDataCache.Common.Core.IDataStore.OpenViewset(Modifier oModifier, ViewsetOptions options, Int32 iTransactionID)
at Oracle.BAM.ActiveDataCache.Remoting.ServerWrapper.OpenViewset(Modifier oModifier, ViewsetOptions options, Int32 iTransactionID)
at Oracle.BAM.ActiveDataCache.Viewset.Open(Context ctxAdcContext, Modifier oModifier, ViewsetOptions options)
at Oracle.BAM.Architect.DataObjectsContents.InternalContentsByRowID(String strEventParam, Boolean bEdit, Int64 lHighlightRowID, Boolean bAddBegin) -
Studio Creator and configurable datasources problem
At design time we've binded components to a creator-configured datasource. As a result the Studio Creators generates in a '_init' method of a session bean code like
'rowSet.setDataSourceName("java:comp/env/jdbc/mydb");'
(where 'rowSet' is a 'CachedRowSetXImpl').
So far so good.
In the next step we tried to make the datasource jndi name configurable to use this code to connect to different databases. It works fine in a web/app-server environment at run time.
But unfortunately the Studio Creator doesn't accept this code. Using something other than the shown hard-coded jndi string in a statement like the example above results in a component error...
This means that we've to use different code at design time and build/runtime? At the moment after working at the design every time we change the code (substitution using ant, e.g.: "java:comp/env/jdbc/mydb" --> getDatasourceName() ) and build the archive.
Is there is any other way to avoid this problem? We dislike such one code patching...
Regards, ThomasHi I found solution, i puted on the page a table -component (with brand new automaticly created dataprovider) , then i set properties visible= false for table, and now I can bind statictext with database field and deploy on tomcat server .
But i think it is not a elegant solution in page source i habe noused-code.
Have Any another Ideas. HELP PEOPLE !!!!
Mariuszek: I use Creator.because right now I can see result of my job and i can qickly change ideas ,
I tried with JDeveleper but i did'nt find this functionality (wich version do you prefered ?) , unfortunately i have to deploy my application on Tomcat. This is my study project, and i make this to become a Master of Techinal Univeristy ;), Deadline time is 30 th September :(
greetings -
Multiple Datasources Problem WSAD4.0.3
Hi,
I am using WSAD4.0.3 in our project. For our application we have an Oracle 9i DB. I created a Datasource in WSAD Test Server with JNDI name as jdbc/ds1. For one of the task i have to connect to a entire different Oracle 9i DB. This is only for this module. The rest of the application uses the first DB. I have created a second Datatsource with JNDI name as jdbc/ds2. From my DAOs i pass the jndi name to get the connection to the corresponding database. From the EJB test client i was able to run my EJBs, connect using ds2 and run my queries.
The problem i am facing is once the server connects to a database, and afterwards for my next task if i was trying to get connection to the other database, i am not getting any code errors. But apparently the datasource is still connected to the first database and that is giving me a Table or View does not exist error. Its happening both ways. First connects through ds1 when i login to our project. If i do something related to that same database, it works. But if i try getting connection through ds2, i get table does not exist error, because its executing the query in the first database and those tables obviously dont exit in that DB.
I was able to get direct connection to the second database from my DAO. But thats not what i want to do, because i foresee us updating table in 3-4 different databases for this task and we want to use Datatsources because we have change the code whenever they make changes to the Database or the machines where it is.
Could someone please help me on my problem. Any kind of input is appreciated.
Thanks,
Ravi.Hi Ravi,
I'm not sure I understand your problem. I too use WSAD and have multiple datasources configured for each database I need to connect to without issue. However, it sounds as if you are trying to use the datasources to connect to different db's such as 1 for dev, 1 for test, 1 for qa(?). So you want the datasources to dynamically allow you to run the same code against different db instances. Is this the case?
If so, I'd suggest using the same datasource as default, but configure your system (and I think it can be done in the datasource but I'm not positive) to use property file which defines the db you wish to connect to. You'd still need a restart, but no code changes other than to tweak the property file (and WSAD can be set up to store the data in memory which allows you to write a seperate class which could refresh the memory on changes without a restart). -
DataSource problem in Jdev10.1.3.4
I am running OC4J in Jdeveloper 10.1.3.4 and setup a DataSource to connect to the DB on remote machine.
Context ctx = new InitialContext();
DataSource ds = (DataSource)ctx.lookup("jdbc/name");
if I am trying to get connection this way :
Connection con = ds.getConnection();
I am getting "java.sql.SQLException: User credentials doesn't match the existing ones" exception , though I am 100% sure username/password are correct.
If I am trying to get connection like :
Connection con = ds.getConnection("username","password");
then : "java.sql.SQLException: Io exception: The Network Adapter could not establish the connection"
any ideas?I had a problem with URL and after I fixed it I was able to connect using :
Connection con = ds.getConnection("username","password");
however while trying to connect using :
Connection con = ds.getConnection();
still gives me an exception "java.sql.SQLException: User credentials doesn't match the existing ones" -
Hello,
I tried to create a datasource using Visual Administrator to Oracle Database. I have a webdynpro application accessing the datasource to pull the data from the Database and display to the user.
I am working on Oracle 10.2 and using ojdbc14.jar. I am using JDBC 2.x driver for this. Here are the configuration parameters used for the Datasource
JDBC Version : 2.0 (with XA Support)
Object Factory : oracle.jdbc.pool.OracleDataSourceFactory
DataSource Type : ConnectionPoolDataSource
CPDS Classname : oracle.jdbc.pool.OracleConnectionPoolDataSource
[Additional] Properties:
url = jdbc:oracle:thin:@localhost:1521:orcl817
user = scott
password = tiger
My application is not able to pull up any data from the database and is not showing any data. I found an exception on the defaultTrace file. Here is the stack trace of the exception thrown.
#1.5_#0003BA1D8303004F0000005700000B5F00043969ECC1420E#
1189027013280#com.sap.engine.services.connector##
com.sap.engine.services.connector#Administrator#11205####
1da526b05bf511dc907a0003ba1d8303#SAPEngine_Application_Thread[impl:3]
_37##0#0#Error##Plain###ResourceObjectFactory.getConnectionSet(MDM_SandBox),
Exception: com.sap.engine.services.connector.exceptions.BaseResourceException:
ConnectionFactory "MDM_SandBox" does not exist.
Possible reasons: the connector in which ConnectionFactory "MDM_SandBox" is
defined is not deployed or not started.
at com.sap.engine.services.connector.ResourceObjectFactory.getConnectionSet(ResourceObjectFactory.java:671)
at com.sap.engine.services.dbpool.deploy.DataSourceManagerImpl.listUsedConnections(DataSourceManagerImpl.java:565)
at com.sap.engine.services.dbpool.deploy.DataSourceManagerImpl.getUsedConnectionsCount(DataSourceManagerImpl.java:967)
at sun.reflect.GeneratedMethodAccessor459.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.pj.jmx.introspect.DefaultMBeanInvoker.invoke(DefaultMBeanInvoker.java:58)
at com.sap.pj.jmx.mbeaninfo.AdditionalInfoProviderMBean.invoke(AdditionalInfoProviderMBean.java:289)
at com.sap.pj.jmx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:944)
at com.sap.pj.jmx.server.interceptor.MBeanServerWrapperInterceptor.invoke(MBeanServerWrapperInterceptor.java:288)
at com.sap.engine.services.jmx.CompletionInterceptor.invoke(CompletionInterceptor.java:409)
at com.sap.pj.jmx.server.interceptor.BasicMBeanServerInterceptor.invoke(BasicMBeanServerInterceptor.java:277)
at com.sap.jmx.provider.ProviderInterceptor.invoke(ProviderInterceptor.java:258)
at com.sap.engine.services.jmx.RedirectInterceptor.invoke(RedirectInterceptor.java:340)
at com.sap.pj.jmx.server.interceptor.MBeanServerInterceptorChain.invoke(MBeanServerInterceptorChain.java:330)
at com.sap.engine.services.jmx.MBeanServerSecurityWrapper.invoke(MBeanServerSecurityWrapper.java:287)
at com.sap.engine.services.jmx.MBeanServerInvoker.invokeMbs(MBeanServerInvoker.java:131)
at com.sap.engine.services.jmx.ClusterInterceptor.invokeMbs(ClusterInterceptor.java:212)
at com.sap.engine.services.jmx.ClusterInterceptor.invoke(ClusterInterceptor.java:766)
at com.sap.engine.services.jmx.MBeanServerInterceptorInvoker.invokeMbs(MBeanServerInterceptorInvoker.java:102)
at com.sap.engine.services.jmx.connector.p4.P4ConnectorServerImpl.invokeMbs(P4ConnectorServerImpl.java:61)
at com.sap.engine.services.jmx.connector.p4.P4ConnectorServerImplp4_Skel.dispatch(P4ConnectorServerImplp4_Skel.java:64)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:312)
at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:199)
at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
The excpetion says that the Datasource is not deployed or not started. However, I can see my datasource running in the Visual Administrator.
Any help on fixing this problem is appreciated.
Thanks
SumanSuman,
We had a lot of trouble figuring out how to setup Data Source for Oracle also so you're not alone. : )
Before setting up the datasource, did you create a driver in Visual Administrator? You can name it anything you want but it should point to the classes*.zip file that contains the Oracle drivers.
Then you need to specify that driver in the Data Source.
The rest looks OK. The only other thing I can suggest right now is for you to set the Initial Connections to a non-zero value. Then when you save the Data Source, it will attempt to create the connection. If it fails you know there is something wrong with your data source. If it saves OK then the problem is somewhere else.
Oh, and we haven't been able to get it to work with Native SQL option under SQL Engine. We use Vendor SQL radio button.
Good luck! -
Replicating Datasources Problem
All,
When I try replicating the datasources from ECC, after replication, the data sources in 7.0 show that M is not equal to A version. This is happening in case of all the Datasources. What is the problem? How to I make in M = AHi,
Before going for data source replication in bi side. check weather that data source is active in r/3 side and also do the transfer datasoure in r/3 side.
first install that data source from BI content. then do transfer from r/3 side. finally replicate that DS in bi. check with it.
Regards
Harikrishna N -
Transport ERP and BW DataSource problem
Hi,
I´m trying to transport from the Development system to Quality. During this transport I have figured out that the Quality BW has a connection problem with the Quality ERP. Then I decided to transport to the Productive system.
The transports of the ERP works fine (Dev > Quality > Productive). But every time I have a transport error for the BW transports in Quality and Productive. It says that the DataSource and DTP is not available in BW (each system Quality and Productive) and I am activating the DataSource and DTP manually afterwards.
Is this the normal way?
I am asking because in Productive I can´t activate anything afterwards.Normally check whether is there any change in R/3 data source when you are transporting the changes in BW system.
So as a practice you need to transport the source system related transport first and then replicate the data source, before moving the transport in BW system. As a practice after the replication you can also activate the data source using the standard program avaialble.
Also you can check the connection between R/3 and BI system before moving the BW related transport which might require the source system should be active in order to check whether the DS is present in R/3 or not. So make sure this point always.
About the DTP's, we are facing this issue in BI7.0 , you need to findout what is causing the issue to deactivate the DTP's.. if there is any change at transformation, then this might can also cause the DTP to go deactivated.
Hope this helps.
Murali
Edited by: Murali M on Aug 24, 2010 1:09 PM -
Hyperion configure interface datasource problem
i installed hyperion 11.1.2.2 and installation finished succesfully.
I login to console http://ip:19000/workspace and i try to call "configure interface datasource" menu
i get error message.
; nested exception is:
HTTP transport error: java.net.MalformedURLException: no protocol: Sessions.asmx
Code: java.rmi.RemoteException
Description: An error occurred processing the result from the server.
Actor: none
Any thoughts would be great. Thanks...l Use this URL:
http(s)://Local_machine_name/hyperion-bpma-server/Sessions.asmx
If a Sessions page is displayed, then IIS is correctly configured. If there is any error in IIS, check the Event Log to identify the problems. Check the System and Application Log to see if errors were logged by ASP.NET or IIS, and fix any errors. A possible cause is incorrect privileges for the user for the TEMP directory.
l Check the Event Logs from sources starting with HyS9EPMA. Possible causes are communication errors with Shared Services or the database.
l The ASPNET user may not have access to certain folders. If the Event Log displays any security-related errors, assign rights to the ASPNET user.
1. From the command prompt, go to this directory: C:\Windows\Microsoft.NET\Framework\v2.0.50727.
2. Enter run aspnet_regiis.exe -ga.
Refer: Pg 105 of http://docs.oracle.com/cd/E17236_01/epm.1112/epm_install_troubleshooting_1112200.pdf
HTH-
Jasmine. -
hi guys:
dose dotasource 2LIS_11_VAITM support RDA?in my bi7 system it dosen't support RDA.
can anybody can give me a ds that support RDA?
thks
Best regardsHi..
Insert the required process type into the process chain by using drag and drop or by double-clicking.
In the next dialog box, select a process variant and confirm your entry.
a. To create a new process variant, enter a name for the variant and choose Create.
b. In the resulting dialog box, enter the description of the process variant and choose Next.
The maintenance screen for the process variant appears.
c. In the variant maintenance, select the Data Sources for which real-time data acquisition should be started or stopped for one or more Info Packages for real-time data acquisition.
d. Save the variant and go back to the previous screen.
e. In the resulting dialog box, confirm the insertion of the process variant into your process chain.
Start Real-Time Data Acquisition (RDA) Load Process
If the InfoPackages selected in the process variant are not yet assigned to a daemon, the system selects one or more suitable daemons and assigns the corresponding DataSources to them. When searching for a suitable daemon, the system proceeds as follows:
a. Assignment based on the InfoProvider (data target)
Different DataSources (and therefore InfoPackages) that define values for the same InfoProvider must be assigned to the same daemon.
b. Assignment to the daemon that was last assigned to the DataSource (and therefore to the InfoPackage)
The system stores the information about the assignment of a DataSource to a daemon when the daemon assignment is deleted. This information can therefore be used later for another assignment to a daemon.
c. Assignment to the daemon to which the fewest DataSources are assigned
If multiple daemons are possible here, the assignment is made to the daemon with the lowest number
If there is not yet a daemon available, the system creates one and assigns the DataSources to the daemon. If the DataSources are already assigned to a daemon, this daemon is used.
The data transfer processes assigned to the DataSources are also assigned to the daemon.
If all the assignments have been made and the daemon or daemons are not running at the time of process execution, the process chain schedules the daemons for immediate use and the process variant ends.
If an Infopakage selected in the process variant is assigned to a daemon that is already running, the steps described here are not applicable and not performed.
Stop Real-Time Data Acquisition (RDA) Load Process
Running data transfers for the Info Packages and corresponding data transfer processes selected in the process variant are terminated.
The open PSA, DTP and possibly change log requests are closed (if the daemon is running, after ending the data transfer; directly if the daemon is not running).
The system then deletes the assignments of the corresponding Data Sources to the daemon.
As mentioned above, the system stores the information about the assignment of the DataSource to the daemon, and this information can be used again later when the daemon is again assigned.
If an InfoPackage selected in the process variant is not assigned to a daemon, the steps described here are not applicable and not performed.
Thanks==points
Regards
Sudheer
Maybe you are looking for
-
I have no Canon toolbar so I can't print from the Web on my printer
I have a Canon MG5120 multi-printer and when on Firefox the only thing that prints from the web is the time and date border, not the main body of whatever I'm trying to print, like an email or online article. I'm running XP, and I have the Canon tool
-
SCAC Field Should have Drop Down Values and ASN should have Storage locatio
Hi , We have a requirement while creating ASN in which we have to add SCAC ID in the SCAC field ( Carrier) this SCAC ID comes in Shipping details - We want to have drop down values in this field and also if we dont enter value in this field An Err
-
Airplay mirroring video works on PC but goes black on ios device
Using Airplay I can mirror fine from my Ipad 3 (ios 6) or my iPhone 4S (ios 6) to my PC (Vista Ultimate) until I try to play a video (i.e. can mirror photos fine on both devices) -- and then the screen goes black on the ios device and the video only
-
Language field is not maintained in the source system
hi, I had problem with 0ehs_actn_text data source. when i'm trying to pull data to BW it's saying language field is not maintained in the source system. I check the datasource there is no language field in the extract structure. and No fileds are che
-
How can I change default view options for pdf files opened by Safari? In particular I would like to set "Auto size" and no "Continuous" by default. Thx Vitaliano