RDA for Transactional Data Changes (But needs to load as Master Data to IO)

Hi,
I would like to use RDA to load Data changes into IO (Not for DSO).
I tried using this, i can able to load data into PSA. But, from PSA to IO, No datapackage is getting transfered. i.e. Transfered records = 0.
We considered several options i.e. remote cubes etc. We need to implement RDA.
Note: I have gone through the Documentation on RDA. Which SAP mentioned, RDA won't support for Master Data if we have aggregates. We don't have any Aggregates build on my cubes.
Thanks in advacne!!!
Nagesh Ganisetti.

RDA DTP is used for supplying data to the Data Store Objects but not to the Master data infoobjects...
Please follow the links to get to know more on this..
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/f98e07cc483255e10000000a1553f7/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/fa50e40f501a77e10000000a422035/content.htm
thanks
hope this helps..

Similar Messages

Loading InfoObject master data into Cube

Hi Guys,
I have a question. I created an InfoObject as a data target and loaded data into that data target. I created a cube and I want to include this infoobject in the cube. Now How do I load data into this cube from the InfoObject.Because the InfoObject doesnt have any option to select data targets, since it is master data.
Data is being loaded into the InfoObejct. But when I check the cube there is no data.
How do I load this master data into the cube without update rules?
Thanks in advance.

Hi,
i think u need load some value to transaction data so that you can report on it, but how you are going to decide which row will be having which value from master data? in general value for this should come from transactional data, or you could assign some constant value to it.
Do you want to use any attribute of Inoobject in report? And if you have any key value for that coming from Transaction data, you can use rule type as read from master data
It depends upon your requirememt.
Since you want to restrict the values of the cube which are going into the report then you should include this object into the cube.
In any case if you want to restrict the value of the transactional data in the cube with either the value of the objects ot the attributes of object you will have to add this object into the cube.
As you said you can load master data and use in report but how you are going to use it..............you will have to include it in the cube to use it.
Also you can check whether this object is attribute of some other object already in the cube in that case you can make it navigation attribute and then use it for the restrictions in the cube.
In this case only you do need to add it to the cube,But if it not an attribute of any object then you must add it to the cube.
You have to get the value of your infoobject into Cube from datasource, even though you want to use attributes only.
You will have to add it and it wont have any effect the transaction data getting loaded into the cube will be different from the master data only SID's are matched during loading of the data.
You should load separate master data into the 0recontract infoobject with the master data source and make the respective object contract type and contract category as navigation there.
Also you should add 0recontract to the cube and update it from the transaction data source as you have said that it can be updated.
Then just do the normal restrication at the report level
You can make this display attribute as naviagatioonal first in the master data object and then in the cube make this attribute as navigational.
then you can use it to restrict in the cube
You can use Category as InfoObject in your cube, and while loading data for your infoobject in the rule type you can use option as reading from master data. It will take key of infoobject, and will update attribute value in your cube.
http://help.sap.com/saphelp_nw04s/helpdata/en/e5/f913426908ca7ee10000000a1550b0/content.htm
You can also restrict with attributes value, Just in the restrcition of your infoobject in query designer, slelect left-botton button of 'Dipaly Other Values', here you can select you attribute and its value for restriction as well
Regards,
Hareesh

Loading new master data

Hi experts!!!
I am going to load new master data in our BI.Our BI consists of some cubes and DSOs which have data from past 3 years and which are based on old master data.Now the Master Data is completely changed to new values and will be loaded into our BI.I have following doubt regarding this:
From past three years the transaction data that is loaded into our cubes and DSOs is based on Old Master data.Now if I suddenly load NEW master data values,what will happen to this old transaction data loaded until today?I can imagine that once I load new values,from now onwards,transaction data will be based on new values only.The question is what will happen to the old transaction data ?
Please assume both cases of Time Independent Master data and Time Dependent Master data while reading my question.
Thanks for your time.

Hi,
Case1 (normal case, happens frequently) - Only attributes of master data has changed.
Your transaction data would reflect the old master data when you have master data lookups or reads on master data table (P, Q tables for time indep/time dep MD) for populating master data in the transaction data flow.
In case just the attributes on the master data objects like Customer/Material have changed and these are used at the query level, the queries would show the new attribute values. In case the time validity/dependency has changed, the new time validity takes effect. For e.g Person X is respnsible for cost center A from 01/01/2010 till 31/12/2012. Now MD gets changed and Person Y is responsible for Cost Center A from 01.01.2011 till 31/12/2015. If the report is run now, the person Y would be shown in the report.
Case 2 - The master data has big changes in the source system. for e.g. Cust 10000 is now 11111 or material 12345 is now 112233.
In these cases your historical transaction data would be showing old master data.
For e.g Person X is respnsible for cost center A from 01/01/2010 till 31/12/2012. Now Cost center A is changed to B and person Y is responsible for the same period. Old transactions with Cost center A shows X as responsible and new transactions with Cost center B shows Y as responsible.
Even if your master data has changed completely, there would not be any affect on the existing transaction data....as new master data entries would be written to the tables and the existing master data remains.

I have had my IPAD2 for quite a while but haven't activated my cellular data for about a year. I am now trying to activate and when I go to cellular data, turn it on and try to tap view account i just get a message that says "connection to server lost".

I have had my IPAD2 for quite a while but haven't activated my cellular data for about a year. I am now trying to activate and when I go to cellular data, turn it on and try to tap view account i just get a message that says "connection to server lost". I could swear the last time I used cellular data you would see the signal in the upper left corner and I only see "no service" there, I am in a location where I know I should have service. Is there something I should do to my IPAD? I tried resetting, I tried clearing cookies and history in Safari (after reading a post n these discussions). I don't know what to do next. My IOS version is 6.1.3. I did go into Network from the general tab and I see it says "SIM not provisioned". HELP and Thank you in advance.

Hello Theresa818,
Thank you for using Apple Support Communities!
It sounds like the cellular data will not activate for some reason on the iPad.
I found this article that will help you resolve this issue here, named iPad (Wi-Fi + Cellular Models): Troubleshooting a cellular data connection, found here http://support.apple.com/kb/TS4249
Check for a carrier settings update.
Update your iPad.
Toggle the Cellular Data setting off and on under Settings > Cellular Data.
Restart your iPad.
Tap Settings > General > About. Locate the Carrier entry and make sure that your carrier is correct.
If your SIM card has SIM PIN enabled, try turning it off: Tap Settings > Cellular Data > SIM PIN.
Make sure you're in an area of good coverage. If the cellular data connection works in another area, contact your carrier to report the original affected area.
Reset network settings: Tap Settings > General > Reset > Reset Network Settings.
Restore the iPad as new.
If none of the above steps resolves the issue, make an appointment at an Apple Retail Store, contact your carrier, or contact AppleCare to troubleshoot further.
I know you may have done one or two of the steps here, so you can skip those.
Take care,
Sterling

Impact on transactional Loads if Master data is not loaded

Scenario for your reference:
The loads to ZPO_LINE from PC3 was failing for past 20 days from The fix was applied on April 21.
I need help to decide the effects of not loading ZPO_LINE for past 20 days. And create a detailed plan for data loads required.
If the master data is not loaded for 20 days will it affect the transaction loads happened during those days?
And how can i find out the impact and correct the transaction data if it does?
Can any 1 help me with this?

Hi,
If i understand your scenario, you have a scenario where the Master data load has not been updated for the last 20days but, the transaction data was loaded without any interruption.
In such a scenario, the Transactional loads will only be affected if there is some field which undergoes transformation after looking up on the master data.
So, first load the master data and run the attrib change run process.
After this, if the transaction data is in full update mode, then you dont need to do anything as data will be refreshed with correct values in the next load.
If delta loads are there, you might need to performa full repair.
Regards,
Rahul

Changing the "Reconciliation Account" in the master data of a Customer

Hi All,
I've to change the "Reconciliation Account" in the master data of a Customer. But this fiel has been made not modifiable.
Could anyone tell how change this?
Thanks,
Gandalf

Hi,
In SPRO, change the field status for the customer account group to optional. Then you can change the reconciliation account of the customer.
The Path -
SPRO>>Financial Accounting (New)>>Accounts Receivable and Accounts Payable>>Customer Accounts>>Master Data>> Preparations for Creating Customer Master Data>>Define Account Groups with Screen Layout (Customers). Here select the account group for the customer and double click on the line. In this screen, double click on Company code data. Then change the field status in Account management for Reconciliation account.
Hope this helps.
Thanks and Regards,
Anit

Upload transaction data first BW report don't have master data description

Hi All Expert,
Im newbie to BW.
When i do my task, i upload the transaction data first and then upload the master data (customer, vendor) secondly.
When i viewing my BW report, it didn't show up the Name of customer and vendor.
Izzit because the order of upload transaction data and master data is wrong so i got this problem?
How can i solve this problem? (because i try to reupload the master data again, the name field still blank)
Hope someone can advice or help me.
Thank you very much.

Check in the master data infoobject whether the texts are loaded or not. If not, load the master data texts from your source system.
Just right click on the master data infoobject and click on "Active master data".
If still it doesn't activate, go to Menu --> Tools --> Attribute change run.

Change account groups in vendor/ customer master data

Hi,
Do you think is possible to change account groups in vendor/ customer master data?
Thanks

Hi,
Good evening and greetings,
Changing the account groups will redetermine the Reconciliation account, which will be creating a chaos during Audit Reconciliation. But if there is a requirement, please go through the following link
http://help.sap.com/saphelp_47x200/helpdata/en/dd/55f534545a11d1a7020000e829fd11/frameset.htm
Please reward points if found useful
Thanking you
With kindest regards
Ramesh Padmanabhan

How to Load the Master Data for custom defined Z infoobjects?

Hi Gurus,
This is the requirement.
Some screen enhancements has to be made by adding new Custom fields( like two text boxes,eg Name and city ) in such a way if we enter data into that text box,that data value for both of the Enhancements has to be stored in some table.If this data is a master data,then how would I pull this master data into BW.
Please someone throw some light on this problem.
Lets say a Screen is enhanced with NAME and CITY with text text boxes.Let the user enters the value for NAME and CITY.Let them be stored under two different tables ZTAB1 and ZTAB2.How would I load this master data into custom Defined Z infoobjects ZNAME AND ZCITY in BW.
Please help me out.
Thanks is Advance,
Regards

you can by creating generic datasources on thoase tables with Full load or delta.
if the number entries is less.. you can try full load...
if it is more... along with required fields...put date also as one fields. which needs to get date of execution of program or date of uploading to Tables. this will be useful build Delta Mechanism.
all the best.
Nagesh Ganisetti.

Loading GL Master Data -- Attributes, Text, Hier ; and Transaction Data

Hi all,
Could any one give me the steps individually to load the following type of data in BI 7.0:
1. Master Data with Attributes
2. Master Data with Text
3. Master Data with Hierarchy
4. Transaction Data
Do I have to create the Transformation and DTP's individually to load all the above kind of Data?
Please give me the information as much as you can.
Thanks,

For master data when you create tranformation it will prompt infoobject to act as infoprovider, and then you create DTP to schedule data to it. It works fine with attribute and Texts, though hierarchy dosn;t support much features of 2004s at my side. Like i am not able to migrate Hierarchy datasource to 2004s, and even when i replicate it, it comes as 3.5 datasource only.
For transaction data follow Gokuls step, or try to find on forums you will get lot of discussion on it.

Data error when loading to master data?

Hi,
I am loading data from Data base to BW.It is a master data loading.I got an error in the 8th package of the load for the time field which is server update time(reference 0TIME) .The data server update time for that particular record is '19900101'.I am really confused what is the error with this kind of data?
Here is error message:
0TIME: Data record 1797 ('3YV4C0EJBWTGO1CA'): Version '199001' is not valid
Message no. RSDMD194
Diagnosis
Data record 2. with the key '3.' is invalid in value '4.' of the attribute/characteristic 1..
System Response
The system has recognized that the value mentioned above is invalid, and has processed this general error message. A subsequent message may give you more information on the error. This message refers to the same value, even though it does not state this explicitly.
Procedure
If this message appears during a data load, maintain the attribute in the PSA maintenance screens. If this message appears in the master data maintenance screens, leave the transaction and call it again. This allows you to maintain your master data.
Please help me to resolve this also explain what is the differnce in this kind of data?
Thanks,
Vasu

right click on the master data --> delete master date, BUT you will only be able to delete master data not used in a cube (you'll get a pop up to confirm this)...if you want to delete master data already used in a cube, you need to delete the contents of this cube first (and any other cube where this master data is used)...only then you can completely delete the master data entries
M.

'Overlapping Time Intervals' error while loading the Master Data

Guys,
          Need you help with this. I am trying to load the Master Data (attribute) for InfoObject 0FMD_FRSITM using DTP from DataSource 0FMD_FRSITM_ATTR and am getting an error 'Overlapping Time Intervals'.
This is happening due to overlapping Valid From/Valid To date's for the same Financial Statement Item (0FMD_FRSITM) with different Editions.
If I select the option 'Ignore Duplicate Records' while loading the data, it is successful. But not all the records are loads and Editions are missing.
Below is an example of how the data looks like.
FRSITM         Valid To                  Valid From                 Edition
1001             12/31/9999             04/01/2010                2010.1.1
1001             01/31/2010             03/01/2010                2010.1.2
1001             12/31/9999             02/01/2010                2010.1.3
In the above scenario, the Valid To Data for record 1 and record 3 is the same (12/31/9999) and the record 3 is being ignore when I select the option 'Ignore Duplicate Records'.
And also I see that the Edition is not the Key Field.
Any suggestions or ideas? Appreciate your help.
Thanks.

FRSITM Valid To Valid From Edition
1001 12/31/9999 04/01/2010 2010.1.1
1001 01/31/2010 03/01/2010 2010.1.2
1001 12/31/9999 02/01/2010 2010.1.3
1. While selecting ignore duplicate, make sure to-date is not part of symantic key.
2. if system comes across two same records it picks up the latest one.
3. It shall merge the timelines is overlap is found.
4. I hope Edition is time dependent attribute
I believe infoobjet key is FRSITM Valid To.
In your case because first record has more period and may be the latets record system ignore the earlier one with the same time interval.
have a look at Q table and you shall be able to figure out for your self.
Hope it helps
Vikash

Loading of master data through input schedule

Hi guys!
Is any solution for loading/updating of master data through input schedule?

Hi Maxim,
In addition to all above, Input Schedules are used to enter and send data for whatever dimension members you have maintained in BI or BPC.
The master data can be maintained in BI, then you need ot load data from BI and it will be reflected in BPC.
If you want to make changes in master data in BPC, then you need to goto Admin, select whatever properties you want to display and then Maintain Dimension Members for the same.
However, you can also import master data from BI using DM packages in BPC Excel.
Hope this clarifies.
Rgds,
Poonam

Initial full load of Master data using process chain

Hi All,
Could you please help me regarding, initial master data load to characteristics with attributes and text. I need to load master data to 23 info objects, by using process chain can I do full load of master data to all info objects at a time. And one more doubt is, as per my knowledge we can't maintain more than one variant in an info package, is that right ? or we can ?
Means Start Variant -> Info Package (0Customer_Text, 0Customer_Attr,0BILL_TYPE_TEXT, BILL_CAT_TEXT) -> DTP ( ", ", ", ") -> ACR.
Your Help will be appreciated.
Thanks & Regards
Sunil

Hi,
"I need to load master data to 23 info objects, by using process chain can I do full load of master data to all info objects at a time."
if there is no dependency between attributes then you add you can create process chains and trigger them at a time. No issues.
we can't maintain more than one variant in an info package, is that right ? or we can ?
With one info pack you can't load data to all 23 psa. because each data source have own psa. you need to sue 23 info packs.
in general start variant--> info pack --> dtp (assuming as your bw 7.x)---> attribute change run.
like that you need to create 23 chains
Or create one two big chains.
one is for attribute and another for text.
In attribute
start varaint--> info pack(info bject 1)--DTP(infoobject 1))--> info pack(infoo bject 2)-->dtp(infoobject 2).
Like that way you can create in series and parallel chains to load attributes data into info objects. at end you add change run for 6 info objects each. SAme you can do for text loads also.
Thanks

Error in Loading Project master Data into BW from R3

Hi Experts,
Actually I am trying to load Project Master Data from R3 to BW through a BW Process chain, Its a daily activity which we are performing since long time.
But since last 2 days loading is getting failed with an error in ST22 in source system (R3):
Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED
Exception              CX_SY_REF_IS_INITIAL
Date and Time          27.09.2011 01:47:15
Short text
     Access via 'NULL' object reference not possible.
What happened?
     Error in the ABAP Application Program
     The current ABAP program "CL_CGPL_TASK==================CP" had to be
      terminated because it has
     come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
     caught in
    procedure "PREPARE_FOR_RELOAD" "(METHOD)", nor was it propagated by a RAISING
     clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    You attempted to use a 'NULL' object reference (points to 'nothing')
    access a component (variable: "ME->OUTLINE_PARENT").
    An object reference must point to an object (an instance of a class)
    before it can be used to access components.
    Either the reference was never set or it was set to 'NULL' using the
    CLEAR statement.
I tried to reload the data but no help, I am not sure how to reolve this issue, I also contacted to BASIS even they are not aware of this error.
I am seeking help from you guys.
Please help to overcome this problem...!
Thanks.

it seems basis issue
howver check below links
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/objects_objref_not_assigned-1793688
OBJECTS_OBJREF_NOT_ASSIGNED error in a background execution
thanks
pathak

RDA for Transactional Data Changes (But needs to load as Master Data to IO)

Similar Messages

Maybe you are looking for