RDDGENOL job getting cancelled with huge number of ABAP dumps

Hi,
In our Production system, we had applied Kernel upto patch level 263 and while
applying SPAM 30 for release 640 it failed. We tried applying Basis patch 15 still
it did not went through.
Since then we are getting around 1500-2500 dumps daily. The job RDDGENOLis getting cancelled and the dumps RAISE_EXCEPTION and SYNTAX_ERROR is displayed in ST22. Today, there were around 2500 dumps in the system.
When I now run the Database <-> ABAP Dictionary consistency check in
DB02, I see number of errors for missing objects in the database. There
are around of dozens of Primary Indexes, secondary Indexes, Tables,
Views listed in the result:
Objects Missing in database No.
=========================== ===
Primary indexes 6
Secondary indexes 14
Tables 37
Views 26
When I try to create each of them using SE16 or using SQL utility on OS
level, it gives an SQL system error. We are also getting thousands of
dumps each day (attached alongwith this message). Also I see the CPF327E error
in the OS Level Joblog.
Also we cannot transport any requests. There is some problem with or
due to the conversions. Is it a problem with Kernel, ABAP dictionary or
database.
Following is the extract of the dumps due to DDIC in 000:
============================================================
Runtime Error          SYNTAX_ERROR
Date and Time         
ShrtText
Syntax error in program "CL_WB_CROSSREFERENCE==========CP ".
What happened?
Error in ABAP application program.
The current ABAP program "SAPLSEWB" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
In program "CL_WB_CROSSREFERENCE==========CP ", the following syntax error
occurred
in the Include "CL_WB_CROSSREFERENCE==========CM00D " in line 8:
|    "The type "KEYWORD_TAB" is unknown." 
============================================================
============================================================
Runtime Error          RAISE_EXCEPTION
Date and Time         
ShrtText
Exception condition "DESTINATION_NOT_OPEN" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
A RAISE statement in the program "SAPLCRFC" raised the exception
condition "DESTINATION_NOT_OPEN".
Since the exception was not intercepted by a superior program
in the hierarchy, processing was terminated.
Short description of exception condition:
Specified destination is not open.
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
How to correct the error
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"RAISE_EXCEPTION" C
"SAPLCRFC" or "LCRFCU20"
"RFC_CONNECTION_CLOSE"
or
"SAPLCRFC" "DESTINATION_NOT_OPEN"
or
"RADBAT01 " "DESTINATION_NOT_OPEN"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "640"
Application server....... "TXTPDSAP"
Network address.......... "172.16.0.140"
Operating system......... "OS400"
Release.................. "5.3"
Hardware type............ "0065000655EC"
Character length......... 8 Bits
Pointer length........... 64 Bits
Work process number...... 35
Short dump setting....... "full"
Database server.......... "TXTPDSAP"
Database type............ "DB400"
Database name............ "TXT"
Database owner........... "R3TXTDATA"
Character set............ "en_US.ISO8859-1"
SAP kernel............... "640"
Created on............... "Dec 11 2008 23:06:45"
Created in............... "AIX 1 5 00538A4A4C00 (IBM iSeries with OS400)"
Database version......... "DB4_52"
Patch level.............. "263"
Patch text............... " "
Supported environment....
Database................. "V5R2, V5R3, V5R4, V6R1"
SAP database version..... "640"
Operating system......... "OS400 2 5, OS400 3 5, OS400 4 5, OS400 1 6"
Memory usage.............
Roll..................... 696832
EM....................... 16759712
Heap..................... 0
Page..................... 32768
MM Used.................. 1383120
MM Free.................. 3483600
SAP Release.............. "640"
User and Transaction
Client.............. 000
User................ "DDIC"
Language key........ "E"
Transaction......... " "
Program............. "SAPLCRFC"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
The termination occurred in the ABAP program "SAPLCRFC" in
"RFC_CONNECTION_CLOSE".
The main program was "RADBAT01 ".
The termination occurred in line 22 of the source code of the (Include)
program "LCRFCU20"
of the source code of program "LCRFCU20" (when calling the editor 220).
The program "SAPLCRFC" was started as a background job.
Job name........ "RDDGEN0L"
Job initiator... "DDIC"
|    Job number...... 00032101    
============================================================
Kindly let me know the immediate fix. Thanks!
Regards,
Nick

Hi Nick,
I would say, you are having a slight missperception of this forum ... it should not replace your basis ressources in your company.
What you are doing is pretty complex (and the mixtrure of SPAM Update AND Basis SP seems to be wrong to me) and therefore, it will not be possible, to help you, just based on such a short dump.
Sorry,
Volker Gueldenpfennig, consolut international ag
http://www.consolut.net - http://www.4soi.de - http://www.easymarketplace.de

Similar Messages

  • Job getting cancelled with Tbale_illegal_statement dump

    hello,
    Hi Experts,
    i have a background job scheduled for a standard transaction SARA .it is getting cancelled and giving the following error:
    "TABLE_ILLEGAL_STATEMENT"
    Information on where terminated
    The termination occurred in the ABAP program "SAPLCKMLLAARCH" in
    "CKMLLA_INIT_READ".
    The main program was "RKSARCDL ".
    The termination occurred in line 253 of the source code of the (Include)
    program "LCKMLLAARCHF01"
    of the source code of program "LCKMLLAARCHF01" (when calling the editor 2530).
    The program "SAPLCKMLLAARCH" was started as a background job.
    The line it is giving Dump Is >       INSERT handle_tab.
    I have tried to debug the transaction but the execution is not ata all going to the program
    SAPLCKMLLAARCH where it is giving dump.Propably because that program is running in Background.
    So please let me know how I can fix this issue..Please

    Hi Prashanth,
    Were you able to resolve the issue ? Because, i am also facing the same problem, when I am triggering the Delete step for CO_CCMAST archiving object.
    Regards,
    Shail.

  • SAP_CCMS_MONI_BATCH_DP getting cancelled with error in program SAPLSPFL

    Hi Experts,
    The job SAP_CCMS_MONI_BATCH_DP scheduled by user DDIC is getting cancelled everyday at 20:00 CET (system time).
    The reason for the job getting cancelled with the runtime error Syntax error in program SAPLSPFL  and a short dump is generated.
    Runtime Errors         SYNTAX_ERROR
    Date and Time          07.03.2012 20:24:50
    Short text
        Syntax error in program "SAPLSPFL ".
    As per instructions I did syntax check for Program SAPLSPFL . It shows syntactical error as shown below.
    The following syntax error occurred in program "SAPLSPFL " in include "LSPFLF07
    " in
    line 148:
    "Bei PERFORM bzw. CALL FUNCTION "SET_DIRVALUE" ist der Aktualparameter "
    ""DIR_VALUES-DIR_ROLL" zum Formalparameter "DIR_VALUE" inkompatibel."
    Please help me on this.

    hi
    check out this SAP Note
    1000897  RZ10 profile import: Maximum path length is 60 characters

  • Job gets cancelled - Plan version cannot be planned for fiscal year

    hello,
    In R/3, I am trying to delete data using KEPM TCODEand the job gets cancelled with message "Plan version cannot be planned for fiscal year".
    Does anyone know what I should do to resolve it.
    thanks,
    Bhat

    Hello,
    Thanks for your response.
    I have checked OKEQ and
    we have entries for fiscal year planning version and in operating concern the version is locked. I don't know if I should unlock the version and what will be the impact.
    thanks,
    Bhat

  • Job DIM_OBSERVER is getting canceled with with a runtime error UNCAUGHT_EXCEPTION

    Dear Experts,
    Job DIM_OBSERVER is getting canceled with with a runtime error UNCAUGHT_EXCEPTION. Below are the details of runtime error.
    Category          
    ABAP Programming Error
    Runtime Errors    
    UNCAUGHT_EXCEPTION
    Except.           
    CX_UJA_ADMIN_ERROR
    ABAP Program      
    CL_UJA_MD_QUERY_OPT===========CP
    Application Component  EPM-BPC-NW-ADM
    Date and Time     
    02.08.2014 23:35:46
    I am unable to find related note and solution for the same. any help would be much appreciated.
    Thanks,
    Akbar.

    Hi Akbar,
    I believe this issue is coming up in BPC.
    But could you please provide some more detailed information like when exactly(after performing which step) is this error occurring?
    BR
    Prabhith

  • Job SM:EXEC SERVICES  gets cancelled with  SYNTAX_ERROR

    Hi,
         The job which refreshes Service sessions (for Early Watch Alerts) in SolMan 4. gets cancelled with the message:
    Syntax error in program "RDSVASAEA_ROOT_____________050 ".
    I performed a syntax check on the program in the ABAP Editor and it gives the following result :
    Field "BDLDLTRHOSTS001030" is unknown. It is neither in one of the
    specified tables nor defined by a "DATA" statement. "DATA" statement.
    Can you let me know, how to solve this problem.
    My system is SolMan 4.0 SP 15 on Win 2003 with Oracle 10.2.
    ST-SER and ST-ICO are with the latest support pkg level,
    Regards,
    Anil.

    These steps can be done easier as of Support Package Stack 15:
    >
    Amit Devale wrote:
    > Step 1:
    > Run report BDL_DELETE_ALL_TABLES via SE38 to delete all entries
    > in the service definition tables
    >
    > Step 2:
    > Execute a 'Refresh service definitions' task session in transaction
    > SDCCN ->Task ->Create ->'Refresh service definitions'
    >
    > Step 3:
    > Execute in transaction SE37 the function module "BDL_GENERATE_LOGFUNC
    > _INCLUDES" and enter the value "ALL" in the 'OPTION' field.
    Hi Amit,
    Support Package Stack 15 of SAP Solution Manager does contain an update of SDCCN (shipped within ST-PI 2005_1_700 SP06.
    [SAP Note 727998|www.service.sap.com/sap/support/notes/727998]
    This offers an easy way to update the service definitions and to generate the logfunc Includes.
    Step 0: Ensure that optimizer statistics exist for table D010INC.
    Step 1-3 :You can use functionality in SDCCN to execute these steps.
    Perform:
    - Path: SDCCN -> Utilities -> Maintain Service Definitions
    - Select 'Delete and Replace Service Definitions -> Confirm this selection
    - Confirm that you want to delete the definitions
    - Confirm that a new task 'Service Definition  Refresh' was created
      (Take a note of the task id -> Review the log for this task id when it is completed)
    You should not not see any errors for either the update of a Service Definitions table or the generation of any re-import include.
    Best regards,
    Ruediger
    P.S.: Great, that you start to share your rich experience here in SDN.

  • LANDSCAPE FETCH job gets cancelled

    Hello Guru's,
    The  LANDSCAPE FETCH job gets cancelled on solution manager system due to the below mentioned error and in order to fix it
    we have already applied the SAP note 1335225 but, the issue still persists.
    Right now, we have come across the SAP note 1108071 which says the job will get cancelled "if you made adaptive computing
    settings in SMSY and the SLD is not accessible".
    can any one help me with how to check the adaptive computing settings in the header data of the system.
    Also, the SLD check from system via tcode:sldcheck is sucessfull and we could access the SLD via browser. Please find the
    details below.
    Properties of RFC destination SAPSLDAPI
    RFC host:
    %%RFCSERVER%%
    program id:      SAPSLDAPI_MP0
    gateway host:
    gateway service:
    Testing the RFC connection to the SLD java client...
    RFC ping was successful
    SLD server access settings:
    host name:   ashb01wa06pr.global.aes.com
    port number: 59000
    user       : SLDAPIUSER
    Use transaction SLDAPICUST if you wish to maintain the SLD server access d
    Launching the SLD GUI in a separate browser window...
    => Verify in the browser GUI that the SLD is in a healthy running state!
    Calling function LCR_LIST_BUSINESS_SYSTEMS
    Retrieving data from the SLD server...
    Function call returned exception code     3
    => Check whether the SLD is running!
    Immediate reponse is highly appreciated
    Best Regards,
    S.Viswanathan

    Hello,
    Could you include the Landscape_fetch error you mentioned in your message?
    I think the issue is still your SLD.  At the bottom of SLDCHECK it tries to retreive business systems in SLD. 
    If it is successfull you will see something like:
    Calling function LCR_LIST_BUSINESS_SYSTEMS
    Retrieving data from the SLD server...
    Function call terminated sucessfully
    List of business systems maintained in the SLD:
       yoursystem1
       yoursystem2
       yoursystem3
      (more...)
    Your SLD check shows that it cannot retrieve systems from the SLD:
    Calling function LCR_LIST_BUSINESS_SYSTEMS
    Retrieving data from the SLD server...
    Function call returned exception code 3
    => Check whether the SLD is running!
    Please make sure that you have configured your SLD according to the post-installSLD setup and configuration guide.  If you still have problems, follow this toubleshooting process...
    http://help.sap.com/saphelp_nw70/helpdata/EN/78/20244134a56532e10000000a1550b0/frameset.htm
    Best Regards.
    Edited by: Phil May on Sep 2, 2009 10:31 AM

  • How to send a mail to the user when a job gets canceled?

    Hi experts,
                      I need to send a mail when a job gets canceled to the user.I know the FM for sending mail and i can find if a job is canceled from tbtco,but i want to know how to send the mail from the same program ,once it got canceled ?
    thanks in advance,
    helpful answers will be awarded with points
    regards,
    ashwin

    Hi Ashwin
    Use the below peace of code:
    REPORT ZBCJOBMONITOR .
    TABLES: SOMLREC90,
            TBTCO.
    DATA: MAILDATA   LIKE SODOCCHGI1.
    DATA: MAILTXT    LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
    DATA: MAILREC    LIKE SOMLREC90 OCCURS 0  WITH HEADER LINE.
    DATA: I_TBTCO    LIKE TBTCO OCCURS 0 WITH HEADER LINE.
    SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001 .
    SELECT-OPTIONS: S_JOB FOR TBTCO-JOBNAME.
    SELECT-OPTIONS: S_JOBC FOR TBTCO-JOBClass.
    SELECT-OPTIONS: S_REC FOR SOMLREC90-RECEIVER.
    SELECTION-SCREEN END OF BLOCK B1.
    START-OF-SELECTION.
      CLEAR:    MAILDATA, MAILTXT, MAILREC, I_TBTCO.
      REFRESH:  MAILTXT, MAILREC, I_TBTCO.
      PERFORM GET_ABENDED_JOBS.
      PERFORM BUILD_RECEIVERS.
      LOOP AT I_TBTCO.
        PERFORM BUILD_TEXT_MESSAGE.
        PERFORM SEND_MAIL_NODIALOG..
      ENDLOOP.
         Form  BUILD_TEXT_MESSAGE
    FORM GET_ABENDED_JOBS.
      SELECT * FROM TBTCO
              INTO CORRESPONDING FIELDS OF TABLE I_TBTCO
                         WHERE JOBNAME IN S_JOB
                           AND STATUS = 'A'
                           AND JOBCLASS IN S_JOBC
                           AND SDLSTRTDT = SY-DATUM.
    ENDFORM.
         Form  BUILD_TEXT_MESSAGE
    FORM BUILD_TEXT_MESSAGE.
      DATA: DATE(10) TYPE C.
      DATA: TIME(10) TYPE C.
      MAILDATA-OBJ_NAME = 'MONITOR'.
      MAILDATA-OBJ_DESCR = 'Batch Job Monitor'.
      MAILDATA-OBJ_LANGU = SY-LANGU.
      CONCATENATE 'Job Name:' I_TBTCO-JOBNAME
                  INTO MAILTXT-LINE SEPARATED BY SPACE.
      APPEND MAILTXT.
      PERFORM FORMAT_DATE USING I_TBTCO-SDLSTRTDT
                                DATE.
      CONCATENATE I_TBTCO-SDLSTRTTM+0(2) ':'
                  I_TBTCO-SDLSTRTTM+2(2) ':'
                  I_TBTCO-SDLSTRTTM+4(2)
                     INTO TIME.
      CONCATENATE 'Start Date/Time:' DATE TIME
                INTO MAILTXT-LINE SEPARATED BY SPACE.
      APPEND MAILTXT.
      CONCATENATE 'Job Class:' I_TBTCO-JOBCLASS
                INTO MAILTXT-LINE SEPARATED BY SPACE.
      APPEND MAILTXT.
      MAILTXT-LINE = 'Job has terminated abnormally'.
      APPEND MAILTXT.
    ENDFORM.
         Form  BUILD_RECEIVERS
    FORM BUILD_RECEIVERS.
      LOOP AT S_REC.
        CLEAR MAILREC.
        MAILREC-RECEIVER = S_REC-LOW.
        MAILREC-REC_TYPE  = 'U'.
        APPEND MAILREC.
      ENDLOOP.
    ENDFORM.
         Form  SEND_MAIL_NODIALOG
    FORM SEND_MAIL_NODIALOG.
      CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
           EXPORTING
                DOCUMENT_DATA              = MAILDATA
                DOCUMENT_TYPE              = 'RAW'
                PUT_IN_OUTBOX              = 'X'
           TABLES
                OBJECT_HEADER              = MAILTXT
                OBJECT_CONTENT             = MAILTXT
                RECEIVERS                  = MAILREC
           EXCEPTIONS
                TOO_MANY_RECEIVERS         = 1
                DOCUMENT_NOT_SENT          = 2
                DOCUMENT_TYPE_NOT_EXIST    = 3
                OPERATION_NO_AUTHORIZATION = 4
                PARAMETER_ERROR            = 5
                X_ERROR                    = 6
                ENQUEUE_ERROR              = 7
                OTHERS                     = 8.
      IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.
         Form FORMAT_DATE
    FORM FORMAT_DATE USING IN
                           OUT.
      CALL FUNCTION 'CONVERT_DATE_TO_EXTERNAL'
           EXPORTING
                DATE_INTERNAL            = IN
           IMPORTING
                DATE_EXTERNAL            = OUT
           EXCEPTIONS
                DATE_INTERNAL_IS_INVALID = 1
                OTHERS                   = 2.
    ENDFORM.
    Regards,
    Sree

  • Reporting Agent job getting cancelled

    Hi all,
    Jobs scheduled using Reporting Agent to load data into cache memory is getting cancelled with the below mentioned message in the job log.
    System error in program SAPLRRK0 and form SX_TO_BDATA_ELSE-02- (see long text)
    What could the possible reason ? Please help.
    Regards,
    Surjit P

    Hi Amit,
    Tried it. But dint work.
    Regards,
    Surjit

  • SAP  Back ground Jobs getting cancel automatically

    Hi All,
    All schedule Background jobs getting cancel  automatically in ECC 5 server. Also not getting any job log in respective schedule job. please help me out with expert suggestions.
    Regards
    Gyan

    1)Are the bgd workprocess free in the system currently?Check if there are any long running jobs holding them.
    Bgd Work process are free but with error code 373,223,007 etc for all 5 bg wp
    error reports from work directory as per work process:---
    wp 22 :Fri Sep 25 15:07:04 2009

    A  ABAP/4 Program SAPLSYDB                                .
    A  Source LSYDBU27                                 Line 7.
    A  Error Code DBIF_DSQL2_DEFAULT_CR_ERROR.
    A  Module  $Id: //bas/640_REL/src/krn/runt/abexsql.c#5 $ SAP.
    A  Function DsqlErrorHandler Line 1986.
    A  COMMIT/ROLLBACK error on "DEFAULT" database connection..

    M  ***LOG R68=> ThIRollBack, roll back () [thxxhead.c   12289]
    C  Rollback Work (0)
    M  *** ERROR => ThCallHooks: event handler rsts_before_commit for event BEFORE_COMMIT failed [thxxtool3.c  252]
    B  ComRolHook(BEFORE_COMMIT, free_all) failed
    B  db_con_commit received an error return code in before-commit action
    M  ***LOG R38=> ThICommit3, db_commit98 ( 001024) [thxxhead.c   12036]
    WP23: Fri Sep 25 15:06:05 2009
    B  dbtran INFO (init_connection '<DEFAULT>' [MSSQL:640.00]):
    B   max_blocking_factor =  50,  max_in_blocking_factor      = 255,
    B   min_blocking_factor =   5,  min_in_blocking_factor      =  10,
    B   prefer_union_all    =   1,  prefer_union_for_select_all =   0,
    B   prefer_fix_blocking =   0,  prefer_in_itab_opt          =   0,
    B   convert AVG         =   1,  alias table FUPD            =   0,
    B   escape_as_literal   =   0,  opt GE LE to BETWEEN        =   0,
    B   select *            =0x00,  character encoding          = STD / []:X,
    B   use_hints           = abap->1, dbif->0x1, upto->0, rule_in->0,
    B                         rule_fae->0, concat_fae->0, concat_fae_or->0
    M  ***LOG R68=> ThIRollBack, roll back () [thxxhead.c   12289]
    C  Rollback Work (0)
    M  *** ERROR => ThCallHooks: event handler rsts_before_commit for event BEFORE_COMMIT failed [thxxtool3.c  252]
    B  ComRolHook(BEFORE_COMMIT, free_all) failed
    B  db_con_commit received an error return code in before-commit action
    M  ***LOG R38=> ThICommit3, db_commit98 ( 001024) [thxxhead.c   12036]
    wp 24:Fri Sep 25 14:33:10 2009
    M  *** ERROR => ThCallHooks: event handler rsts_before_commit for event BEFORE_COMMIT failed [thxxtool3.c  252]
    B  ComRolHook(BEFORE_COMMIT, free_all) failed
    B  db_con_commit received an error return code in before-commit action
    B  ***LOG BZY=> unexpected return code 32768      calling DBACDS     [dbacds#2 @ 1225] [dbacds  1225 ]

    *WP25: *** ERROR => BtcCleanUp: BtcLgAp-call failed (rc = 4) [btcjcntl.c   1308]*
    M  ThCallHooks: call hook >ITSP: EndOfSession< for event BEFORE_SESSION_CANCEL
    M  ThCallHooks: call hook >RtmClearSession< for event BEFORE_SESSION_CANCEL
    M  ThCallHooks: call hook >HttpClearSession< for event BEFORE_SESSION_CANCEL
    M  ThCallHooks: call hook >SpoolHandleHook< for event BEFORE_SESSION_CANCEL
    M  ***LOG R47=> ThResFree, delete (001009) [thxxmode.c   1284]
    M  ThCallHooks: call hook >ASTAT-collect commit handling< for event BEFORE_COMMIT
    M  ThCallHooks: call hook >rsts_before_commit< for event BEFORE_COMMIT
    M  ThCallHooks: call hook >rsts_after_commit< for event AFTER_COMMIT
    M  ThCallHooks: call hook >ThNoClearPrevErr< for event AFTER_COMMIT
    M  ThCallHooks: call hook >SpoolHandleHook< for event AFTER_COMMIT
    M  ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_TASK_SWITCH
    M  ThCallHooks: call hook >ImcResetPtr< for event BEFORE_TASK_SWITCH
    M  ThCallHooks: call hook >DbgBeforeTaskSwitch< for event BEFORE_TASK_SWITCH
    M  ThCallHooks: call hook >HttpResetPtr< for event BEFORE_TASK_SWITCH

    B Fri Sep 25 14:47:04 2009
    B  Disconnected from connection con_da={R/3*WORKFLOWTRACE,26000006,1}
    please let me know where i can send log file if req.
    2)Check for the sm21/sm50 bgd wp traces.
    Getting so may Tem se management errors.
    Some TemSe objects are stored in files. To do this, a path name is set up from the TemSe object name. To be able to use this path, TemSe management requires a directory. It attempted to create it itself. However, this did not succeed.
    3)Check if the filesystem is full as you suggest no logs are being written.
    File system having free space
    4)Check if the user who has scheduled the job is locked ?
    user unlocked
    please help me to resolv this issue.
    thanks
    Gyan
    Edited by: Gyan Prakash on Oct 9, 2009 10:02 AM

  • Triggering  a job when the first job gets cancelled...

    From BMV0, we can trigger a job once the first job is completed using the 'After Job' option. Can u tell me if its also possible to start another job when the first job gets cancelled ?
    Message was edited by: Sushma Anuprava
    Message was edited by: Sushma Anuprava

    Hi,
    Go to the database view V_OP and check for the column 'STATUS' which gives the background job status , based on value from this column (cancelled status ) , start the new job with FM : 'JOB_START' .
    Regards
    Appana

  • Background Job get Cancelled when executing the report. Reason?

    Hi All,
    I have scheduled a Back ground Job and executed Immediately.
    when checking transacion SM37 the job get canceled.
    How to find out the problem for the Job Cancellation.
    Regards,
    Viji

    hi
    After scheduling back ground job ( give a time laps of 2 min )
    then go to sm37 ( at this moment , the job is not yet started) .
    select ur job in sm 37 and when job starts processing , type JDBG as the command and press enter.
    Now it will go to the debugging screen, where u will find system program . Now set a break point at the stements used in ur program from the debugging screen itself.( menu - breakpoint- breakpoint at - statement ) and press F8 .
    Now you can start debug ur code.
    Revrt back if any issues.
    Regards,
    Naveen

  • Job getting cancelled in background scheduling

    Hi,
        I have written a report  in the SAP HR system and it is to be scheduled in background. This program transfers the PERNRs from HR system to CRM system as partners in BUT000.The report works perfectly fine if it is run in foreground. When I run it in background the job gets cancelled and I get the job log having a message that it could not ascertain code page and the system exception ERROR_MESSAGE is raised. If anybody has any clues regarding this problem please help me.
    Thanks & Regards,
    Rahul.

    Hi,
    I Guess you are using container controllers in the Report, and all container contols requires help from Sap Gui for execution. I guess that is the reason it is failing in background . Please check on that aspect as well.
    Hope this helps..

  • Delta uploading job get cancelled in SAP R/3

    question, during delta loading from SAP R/3 to BW, if the delta uploading job get cancelled twice for some reason, will I lost some delta data??
    Pls advise!
    Many Thanks!
    rajatina.

    Hi,
    If your delta jobs are getting error out in BW then you don't need to worry about, because till that time your delta pointer in source system is not yet updated. But if you make any request green by chance in BW monitor then your delta pointer will get updated and you might loose some delta.
    You can request repeat delta multiple times without any issue.
    Regards,
    Durgesh.

  • Job gets cancelled automactically

    Dear SAP pros,
    Could be tell me what are the reasons that a job gets cancelled automactially by the system . Exp user is trying to run T code /sie/asp_mm_ale_las_bom_reset . It starts but is automatically cancelled saying Program can only be used by user in Selection.  Job cancelled after system expection SYSETM ERROR
    Any inputs much appreciated.
    Thanks,
    Diwakar

    Hi
    Can you please check the table "TBTCP". Check whether the user allowed to run the job is same as that the person who is running the job.
    Regards,

Maybe you are looking for

  • Excise Report RG23APart-2

    Hi all, When running RG23A Part-2 report using XL reporter ,in others field of Tax i.e. Hcess Duty Value is not comming on report . Other duties like BED Ecess values are coming.... How to solve this error. Thanks, Neetu

  • IR posting without DCIn happening for PO

    Hi Gurus, I have a scenario, where the Invoice Receipt is happening without DCIn(Del. Cost Invoice) in Purchase Order, we were expecting a error for Exchange rate while posting the IDoc. Is there any setting or a way to determine the solution. Please

  • Linking Data to chart in Net Worth template

    How do I link the Net Worth template charts to tables in another sheet? I added another table to the Assets sheet and successfully modified the Total Assets table on the Overview sheet, and amended the bar chart on the same sheet to refer to the new

  • Ipod Touch 2.0 stuck saying "Restoring iPod Software"

    I downloaded 2.0 and it downloaded ok, but now, when it gets to the point to restore software, the green bar just barely starts and then it stays there... anyone have any suggestions? Oh, and it has been at this point overnite, and has not moved!!!

  • OnValueHelp call Javascript Function

    Hi, I have created an inputfield with a f4-button. If the button is clicked a javascript function shall be called. The function has an input parameter. I tried thid but it doesn't work. I think that the error is located in the last line when I try to