Rdiohead album In Rainbows does not move to iPod

After importing the album, I had two bands with the name Radiohead in the iTunes list (?). In Finder, I found that the original folder was Radiohead while the new one was Radiohead_ . The latter contained In Rainbows album, in the former there were the other albums. After converting the mp3 files in Toast to AAC files I had all the albums in a single Radiohead folder. Here I thought that everything is ok but then it turned out that iTunes does not move the In Rainbows album to iPod. I cannot figure out what's gone wrong. Suggestions? I have never before seen this behavior with iTunes.

Just curious, why did you convert the album from mp3 to AAC?
Converting one lossy format into another simply loses more info along the way and will serve nothing other than to compromise sound quality.

Similar Messages

End Routine Issue - It does not move data from E_T_RESULT to RESULT_PACKAGE

Hi,
I am facing an issue with end routine. I have gone through previous posts on, how to write end routine and all.I wrote the end routine accordingly.
Here is my scenario,
I have 0CUST_SALES master data , which has all the Sales Org, Distribution Channel and Division, Sold to Party, Sales Grp and Sales Dist.
I am getting , Sold to party and Distribution channel at the field routine.
I am using, Sold to Party and Dist Channel and Division = '01'- whatever i populated using a field routine and trying to get the Sales Org, Sales Grp and Sales Dist at the end routine.
It looks like, all the code that i wrote seems correct but it does not populate any values into RESULT_PACKAGE.
Here is the code I wote at the end routine. I am not sure, whats wrong in it. I used, this link to write this routine :
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/203eb778-461d-2c10-60b3-8a94ee91cbfc&overridelayout=true
Global Declaration----
DATA : BEGIN OF IT_CUST_SALES,
    DIV TYPE /bi0/pcust_sales-DIVISION,
    DIST_CH TYPE /bi0/pcust_sales-DISTR_CHAN,
    SALES_ORG TYPE /bi0/pcust_sales-SALESORG,
    CUST_SAL TYPE /bi0/pcust_sales-CUST_SALES,
    SALESDIST TYPE /bi0/pcust_sales-SALES_DIST,
    SALESGRP TYPE /bi0/pcust_sales-SALES_GRP,
    END OF IT_CUST_SALES.
DATA: T_CUST_SALES LIKE TABLE OF IT_CUST_SALES.
Start of End Routine
   SELECT DIVISION DISTR_CHAN SALESORG CUST_SALES SALES_DIST SALES_GRP
    from
    /bi0/pcust_sales INTO TABLE T_CUST_SALES for all entries in
    RESULT_PACKAGE
    where CUST_SALES = RESULT_PACKAGE-SOLD_TO
     AND DISTR_CHAN = RESULT_PACKAGE-DISTR_CHAN
     AND DIVISION = '01'.
    LOOP AT RESULT_PACKAGE INTO e_s_result.
      READ TABLE T_CUST_SALES INTO IT_CUST_SALES
          WITH KEY CUST_SAL = e_s_result-SOLD_TO
             DIST_CH = e_s_result-DISTR_CHAN
             DIV = '01'.
      IF SY-SUBRC EQ 0 .
        MOVE IT_CUST_SALES-SALES_ORG TO E_S_RESULT-SALESORG.
        MOVE IT_CUST_SALES-SALESDIST TO E_S_RESULT-SALES_DIST.
        MOVE IT_CUST_SALES-SALESGRP TO E_S_RESULT-SALES_GRP.
        APPEND E_S_RESULT TO E_T_RESULT .
      ENDIF.
    ENDLOOP.
    REFRESH RESULT_PACKAGE.
    MOVE E_T_RESULT[] TO RESULT_PACKAGE[] .
End End Routine
Data comes into E_T_RESULT but it does not move to RESULT_PACKAGE. Any inputs will be helpful.
Regards,
Kumar

Hi Hegde,
Declaration is same , its like this.
   datA: e_s_result type tys_TG_1.
    data: e_t_result type tyt_TG_1.
I don't know, when i inserted this code in this post, initially it was OK but once i post i also saw , its not that read friendly.
FYI, i am trying to put the code again, lets see if it works.
SELECT DIVISION DISTR_CHAN SALESORG CUST_SALES SALES_DIST SALES_GRP
    from    /bi0/pcust_sales INTO TABLE T_CUST_SALES for all entries in
    RESULT_PACKAGE   where CUST_SALES = RESULT_PACKAGE-SOLD_TO
     AND DISTR_CHAN = RESULT_PACKAGE-DISTR_CHAN
     AND DIVISION = '01'.
    LOOP AT RESULT_PACKAGE INTO e_s_result.
      READ TABLE T_CUST_SALES INTO IT_CUST_SALES
          WITH KEY CUST_SAL = e_s_result-SOLD_TO
             DIST_CH = e_s_result-DISTR_CHAN
             DIV = '01'.
      IF SY-SUBRC EQ 0 .
        MOVE IT_CUST_SALES-SALES_ORG TO E_S_RESULT-SALESORG.
        MOVE IT_CUST_SALES-SALESDIST TO E_S_RESULT-SALES_DIST.
        MOVE IT_CUST_SALES-SALESGRP TO E_S_RESULT-SALES_GRP.
        APPEND E_S_RESULT TO E_T_RESULT .
      ENDIF.
    ENDLOOP.
    REFRESH RESULT_PACKAGE.
    MOVE E_T_RESULT[] TO RESULT_PACKAGE[] .
Regards,
Kumar

Itunes 11.1.3.8 shows a speaker icon in front of the seclection but it is not playing. the progress bar does not move. there are speakers attached to the system and all other programs do profuce an audio output.

itunes 11.1.3.8 shows a speaker icon in front of the seclection but it is not playing. the progress bar does not move. there are speakers attached to the system and all other programs do profuce an audio output.

Go to the Edit -> Preferences-> Playback
In The bottom section of the page click the drop down menu by Play Audio Using and select Windows Audio Session or something other than "Direct sound" or whatever it displays. Click Okay. This worked for me! I hope it works for you too!
Thanks,
John

Item does not move from Workflow Inbox to Work Item Executed by me

Hi experts,
We have implemented workflow inbox for invoice payment. After archive document in OAWD, we will do posting through Workflow inbox. After posting, the item should go to 'work item executed by me' folder. But the problem is the work item is still in the workflow inbox. What should we do? Pls help. This is urgent. Correct answer will be rewarded, TQVM in advanced.
Rgds,
Nanie

Hi Arianie,
First check the status of your WORK ITEM ID. You can check it in SBWP or in SWI6 transaction.
If your work Item ID still remains in the SAP Inbox & does not move into outbox i.e. "work Item Executed by me" then it may happened that your workflow is not triggered after users/responsible agents action completion. You can check the graphical status in SWI6 transaction itself.
Also check whether your Work Item ID's status is not "ERROR" . If it is "ERROR" then you need to resume the work item ID (Whose status is Error) to start/recall the workflow.
Thanks
Pravin

Ipad takes photo every time I close the cover of its case. When I close the cover - it really does take a picture and saves a photo. Luckly, it make a click, and pictures are seen in the photo album, and it does not appear to be forwarding.

When I close the cover - it really does take a picture and saves a photo. Luckly, it make a click, and pictures are seen in the photo album, and it does not appear to be forwarding. It is just gobbling memory and annoying as I can only delete these pictures one at a time.

It seems to take a picture of the counter top = I do not see the keyboard.
I am wondering ....It may be a kids game app that takes pictures of the screen or out the back camera. I am starting to think it may just be a sound effect when placing the iPad on its screen. So many things that may be unrelated but coincedental. It started in May (the sound) and so did the multiple pictures - starting to think they are not related.
Thanks for the quick tip on deleting multiple pictures.

HT1553 my macbook pro is frozen and does not move from loading screen. Can you help?

my macbook pro is frozen and does not move from loading screen. Can you help?

Call Apple Support and schedule a appointment for a hardware check, or take it into a Apple Store.
We can't help you with that problem.
Good Luck

Playing back music on Itunes stays on 0.00 and counter does not move

Hi When I try to play any music in Itunes the counter stays at zero 0.00 and does not move along. I found this thread which best describes my problem so appears to affect quite a few others: http://discussions.apple.com/thread.jspa?threadID=1205504&start=30&tstart=0 however I have tried all the possible solutions discussed on there without success. My operating system is XP Pro. This has happened several times in the past and quite frustrating (only a reboot normally fixes it but there has to be a reason why this keeps happening). Music and video plays fine on other media players (same as users in the thread attached). My wife's Itunes also does it and she is running Vista on her laptop. By the way I have the latest Itunes updates/versions etc and have also tried restoring to earlier backups - all without success. It was playing fine the other day with exactly the same updates just not today. Thank you for any help.

Same here, only it will sync, but extremely slow!

Mouse pointer does not move between monitors

my mouse pointer does not move between displays all of a sudden !

ok, I am using magic mouse, mac mini with two displays,
was working fine, but now when I started the computer recently it does not want to move the mouse to the other screen.
the other screen is open but it is not possible to move anything over to it !!
tried to restart reset the display settings etc. but no luck !!

The SMART ALBUM IPHOTO 6 DOES NOT SEEM VERY INTELLIGENT!

BOUJOUR
ALBUM INTELLIGENT
MA PHOTOTHEQUE EST ORGANISÉ PAR MOIS
CHAQUE MOIS CORRESPOND A UN ALBUM INTELLIGENT
JUSTE UNE CONDITION " LA DATE EST ENTRE LE 01-09-2006 ET LE 30-09-2006"
DEPUIS LA MISE A JOUR VERS IPHOTO 6
APRES IMPORTATION DEPUIS L'APPAREIL PHOTO LES NOUVELLES PHOTOS SONT IMMEDIATEMENT VISIBLE DANS MA PHOTOTHEQUE GENERAL ET DANS LE DERNIER ROULEAU MAIS PAS DANS L'ALBUM INTELLIGENT CORRESPONDANT
IL ME FAUT
SELECTIONNER L'ALBUM INTELLIGENT
COMMANDE MODIFIER L'ALBUM INTELLIGENT
VALIDER ( SANS RIEN MODIFIER CAR MES CRITERES DE DATE SONT BONS)
ET A LA VALIDATION LA PHOTO EST AJOUTER A L'ALBUM INTELLIGENT ET SON COMPTEUR INCREMENTER
LES ALBUMS INTELLIGENT DE IPHOTO 6 NE SEMBLE PAS TRES INTELLIGENT !
HELLO
SMART ALBUM
MY LIBRARY IS ORGANIZED PER MONTH
EACH MONTH CORRESPONDS A SMART ALBUM.
JUST ONE CONDITION "The DATE is BETWEEN the 2006/09/01 AND the 2006/09/30"
SINCE UPDATE IPHOTO 6
AFTER IMPORTATION SINCE the CAMERA The NEW PHOTO ARE IMMEDIATELY VISIBLE IN GENERAL LIBRARY AND IN LAST ROLLER BUT NOT IN The SMART ALBUM CORRESPONDING
I NEED SELECT SMART ALBUM
ORDERS TO MODIFY The SMART ALBUM AND VALIDATE (WITHOUT ANYTHING TO MODIFY BECAUSE MY CRITERIA OF DATE ARE GOOD) AFTER VALIDATION PHOTO IS ADD A SMART ALBUM AND ITS METER INCREMENTER
The SMART ALBUM IPHOTO 6 DOES NOT SEEM VERY INTELLIGENT!
emac Mac OS X (10.4.7) Mini Mac

Gilbert:
Welcome to the Apple Discussions. It seem to work for me so try deleting that smart album and create a new one. See if that will work. Also deleting the iPhoto cache folder from your User/Library/Caches folder might help.
Also using all caps is difficult to read and is tantamount to shouting in the forums. It's much easier to read when in lower case. Thanks.
Do you Twango?

I bought and downloaded a few song on iTunes. Now I see that some of the songs were not completely downloaded and stops a few seconds into the song. I went back to the album but it does not give me an option to re-download. What do I do so that I can down

I bought and downloaded a few song on iTunes. Now I see that some of the songs were not completely downloaded and stops a few seconds into the song. I went back to the album but it does not give me an option to re-download. What do I do so that I can down

Just found the answer - if you have the sam problem look here for the answer:
https://discussions.apple.com/thread/5769424?tstart=0

Initial postion of image changed but now image does not move

hi can any one solve this problem please, i have been trying to change the initial position of my image when i run it 1st on java textpad......
i seem to have moved the initial position of the image by the following >
public void paint(Graphics g) {
          g.drawImage(CurrentImage,xPos = 10,yPos = 100,this);but now the image does not move when i press the keys in its new position
does anyone one know how to solve this?? if you do please reply THANK you.
the original code is below >
import java.awt.*;
import java.applet.*;
import java.awt.event.*;
import java.awt.geom.*;
import java.io.File;
import java.io.IOException;
import javax.sound.sampled.*;
import javax.sound.midi.*;
import javax.swing.*;
import java.awt.Image.*;
public class Man3 extends Applet implements KeyListener {
     int xPos, yPos;
     Image man1;
     Image man2;
     Image man3;
     Image man4;
     Image man5;
     Image man6;
     Image CurrentImage;
     Image offScreenBuffer;
     AudioClip tune;
     public void init() {
          setBackground(Color.white);
          xPos = this.getSize().width/2;
          yPos = this.getSize().height/2;
          man1 = getImage(getCodeBase(),"man1.gif"); // right hand up
          man2 = getImage(getCodeBase(),"man2.gif"); // straight
          man3 = getImage(getCodeBase(),"man3.gif"); // right hand down
          man4 = getImage(getCodeBase(),"man4.gif"); // left hand up
          man5 = getImage(getCodeBase(),"man5.gif"); // straight
          man6 = getImage(getCodeBase(),"man6.gif"); // left hand down
          CurrentImage = man2; // man facing right
          addKeyListener(this);
          requestFocus();
          tune = getAudioClip(getCodeBase(), "Track.wav");
     public void paint(Graphics g) {
          g.drawImage(CurrentImage,xPos,yPos,this);
     public void checkXmin()
               if (xPos == 0) xPos = 500;
     public void checkXmax()
               if (xPos == 500) xPos = 0;
     public void checkYmin()
               if (yPos == 0) yPos = 350;
     public void checkYmax()
               if (yPos == 350) yPos = 0;
     xPos+=1;
     if (xPos>500) xPos=0;
     if (xPos==0) tune.play();
     // man walks right
     public void checkCurrentImageRight()
               if((CurrentImage == man6)||(CurrentImage == man5)||(CurrentImage == man4))
                    CurrentImage = man2;
               if(CurrentImage == man3)          CurrentImage = man1;
               else if (CurrentImage == man1)     CurrentImage = man3;
               else if(CurrentImage == man2)     CurrentImage = man1;
     // man walks left
     public void checkCurrentImageLeft()
               if((CurrentImage == man3)||(CurrentImage == man2)||(CurrentImage == man1))
                    CurrentImage = man5;
               if(CurrentImage == man6)          CurrentImage = man4;
               else if (CurrentImage == man4)     CurrentImage = man6;
               else if(CurrentImage == man5)     CurrentImage = man4;
     public void keyPressed(KeyEvent evt) {
          int offset;
          int x = evt.getKeyCode();
          if (evt.isShiftDown()) {
               offset = 20;
          else {
               offset = 10;
          switch (x) {
               case (KeyEvent.VK_UP):                     // man goes up
                         checkYmin();
                         //checkCurrentImage(2);
                         yPos -= offset;
                         break;
               case (KeyEvent.VK_DOWN):
                         checkYmax();
                         //checkCurrentImage(2);          // man goes down
                         yPos += offset;
                         break;
               case (KeyEvent.VK_LEFT):               // man walks left
                         checkXmin();
                         checkCurrentImageLeft();
                         xPos -= offset;
                         break;
               case (KeyEvent.VK_RIGHT):               // man walks right
                         checkXmax();
                         checkCurrentImageRight();
                         xPos += offset;
                         break;
          repaint(); // display image
     public void keyTyped(KeyEvent evt) {
     public void keyReleased(KeyEvent evt) {
    public void update(Graphics g)
        // Will hold the graphics context from the offScreenBuffer.
        // We need to make sure we keep our offscreen buffer the same size
        // as the graphics context we're working with.
        if ((offScreenBuffer==null) || (offScreenBuffer.getWidth(this) != getWidth()) || (offScreenBuffer.getHeight(this) != getHeight()))
            xPos = getWidth()/2;
            yPos = getHeight()/2;
            offScreenBuffer = this.createImage(getWidth(), getHeight());
        // We need to use our buffer Image as a Graphics object:
        Graphics gr = offScreenBuffer.getGraphics();
        gr.setColor(getBackground());
        gr.fillRect(0, 0, getWidth(), getHeight());
        paint(gr); // Passes our off-screen buffer to our paint method, which,
        // unsuspecting, paints on it just as it would on the Graphics
        // passed by the browser or applet viewer.
        g.drawImage(offScreenBuffer, 0, 0, this);
        // And now we transfer the info in the buffer onto the
        // graphics context we got from the browser in one smooth
}

Not only is this your 7th or 8th posting on this topic, you can't even wait 15 minutes before bumping the posting.
Your question is no more important than anyone elses on the forum and continually posting, starting new threads on the same topic is one sure way to get your posting ignored.

When I rearrange the order of my photos in an album, the order does not stick for exporting for a book.

I manally rearrange my photos in an album, the order does not stick when I export to a folder in order to make a book. Also, if I have given a title to a photo, it does not seem to export with the other pictures in an album.

It's a little vague on what you're workflow is. So I'll make a guess about the book: if you're dragging those photos into an iPhoto book they will be sorted by date. So you would have to use the Photos ➙ Batch Change ➙ Date (with 1 minute between photos) menu option on those photos in the album before dragging them onto the book icon.
Photos exported to a folder on the hard drive will be sorted by the Finder either alphanumerically or chronologically. To get them in the manual order that's in the album you'll need to rename them via the Photos ➙ Batch Change ➙ Title to Text with a sequential number added to each photo. Then export to the Desktop with the option to use the Title as the new File name.
OT

HT4113 My daughters iPod touch asks for her pass code but when she types it in the cursor does not move or input any characters so,she cannot get into the iPod. This has suddenly happened for no apparent reason

My daughters iPod touch asks for her pass code but when she types it in the cursor does not move or input any characters so,she cannot get into the iPod. This has suddenly happened for no apparent reason, what can we do? Can anyone help please?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Progress indicator does not move

Windows xp 64 bit. I have the newest version installed.
When I try to do daily jigsaw at shockwave.com, it says:
"adobe shockwave player is now installing" but nothing happens
The progress indicator does not move. Self help did not work,
uninstlling and reinstalling standalone, etc. The Flash advertisement
befor the game works fine. Wasted several days on it.
Thank you.

i have sam problem to, anyone..??? help
regards,
-Made Jaya -
Find more choice for kuta, legian seminyak hotels discount at kutahotelsbali.com

When typing the curser does not move when typing so when typing the mouse will move the curser and/or delete becase it highlites everything - very frustrating

my mouse does not move or disappear when I am typing in my rogers yahoo account - the curser does. Since the mouse does not move, if I accidently hit the mouse pad or sometimes on its own it takes over and moves the typing to wherever the mouse is located. How do I correct this issue. I have Windows &

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

Rdiohead album In Rainbows does not move to iPod

Similar Messages

Maybe you are looking for