Rdisp/rfc_max_own_used_wp exceeded when doing ALE transfer of Masterdata

i have set up Masterdata distribution model and my parameter value for rdisp/rfc_max_own_used_wp is 25%
however when there is a change and we have like let's say 50 Idocs of GLMAST type in the productions system the RFC user occupies all DIA processes
any ideas how to restrict it?

set rdisp/rfc_min_wait_dia_wp to a higher value.
It depends on the amount of dialogue-users in your system. As far as i remmeber it is said, that one dialogue-wp can handle about 10 logged on users. Of course, if one of them starts a long runner, it can handle only this one .
To give you an example: we have around 1.000 concurrent users (most of them are low activity, just 200 are high activity) and two instances. We have not much parallelized RFC and 60 dia-wp per server. In our system, this parameter is set to 5 (was a try and it seems to be enough).
You can change the parameter dynamically in RZ11. To change it permanently, change it in the profile and restart the instance.
Regards,
ulf

Similar Messages

  • Error when doing material transfer

    hi expert,
    when doing material transfer from plant 0001 to plant 0002, error pops up :
    "maintain vendor for the customer 1234 attached to supplying plant 1234"..
    what should i do??
    thanks

    Dear,
            Use XD02( Customer Master Record )  and GOTO -- Genera Data TAB and select Control Tab and under control tab u will find in top VENDOR field.
           and for VENDOR Master Record use XK02 and select Control TAB under which at top u will find CUSTOMER FIELD.,
    Regards
    AJIT K SINGH
    HAPPY TO HELP U
    Edited by: AJIT K SINGH on Dec 1, 2009 2:01 PM
    Edited by: AJIT K SINGH on Dec 1, 2009 5:04 PM

  • Time limit exceeded when doing MIRO

    Hi Experts,
    time limit exceeded error occured when doing MIRO transaction.
    plz reply with suitable answer.
    Thanks,
    Jyosna

    >
    jyotsna shinde wrote:
    > plz reply with suitable answer.
    Moderator message - Please see Please Read before Posting in the Performance and Tuning Forum before posting - post locked
    Rob

  • How to check the qty is available when doing stock transfer.

    I need to remain the confrimed qty while doing stock transfer.
    for example:
    Unrestricted use : 20
    Sales Order       :  10
    Max qty for stock transfer = 20 - 10 = 10 but not 20.
    How to do customizating?

    Dear Amruta
    Thank you very much for your help.
    I use Checking Group '02' and can you tell me which checking roll is suitable for checking the qty while doing stock transfer.
    eg: the atp is 10 pic and stock transfer is allowed in 10 pic. it will message me if the transfer qty is more than 10 pic.
    Many thanks,
    Slam

  • Error when doing blind transfer from CAD

    We have put a button on our CAD desktop with an action to perform a blind transfer to a specific extension (which happens to be a routepoint).
    20% of the transfers fail with this error message:
    "The agent- or workflow-initiated action request failed."
    Any ideas how we can fix this?
    Our CAD is version 6.4.2.12, on UCCX Prem. 5 and CUCM 6.1.
    Thanks,
    Johnny

    There's a known bug for this but it's not for blind transfers, might be worth TAC'ing this. I also found a similar bug for v6.0.
    CSCsl88916 Bug Details
    Supervised Transfer Causes WrapUp Data problem
    Symptom:
    After Making a supervised transfer, if wrap up data is enabled on the CDA, than agent will get this error message:
    "The agent or workflow-initiated action request failed"
    Conditions:
    This error only happens on Supervised transfer, not blind.
    Workaround:
    This error only happens when you have enabled this 2 following options on RP and CTI Ports,
    Caller Number
    Redirected Number
    Disable those
    Further Problem Description:
    The above 2 options are not on by default and many users have them unchecked, but some users modify those parameters and CAD throws that error message
    To reproduce this is what can be done:
    Enabled the 2 options:
    Caller Number
    Redirected Number
    On the CTI port and Route Point,
    call to the RP
    Agents Picks Up the Call
    Talks to the caller
    Hits the transfer button and initiates a call to the NON - ICD extension.
    Waits till the called party answers
    Hits the transfer button again
    If wrap up data option is enabled on the CDA, than
    Agent will get this error message:
    The agent or workflow-initiated action request failed Status
    Product:
    Cisco Unified Contact Center Express
    Technology:
    1st Found-In
    5.0(1)
    5.0(1)SR1
    5.0(1)SR2
    Fixed-In
    5.0(2.1)
    7.0(1)
    7.1(1.26)
    5.0(2.1.10)
    5.0(2.2.20)
    Component(s)
    icd
    Related Bug Information Workflow Initiated failed Exception - Unable to set the wrapup data
    Symptom: Work Flow Initiation Exception comes when Agent selects Wrap up data after Transfer is completed Conditions: Agent 1 has an ICD call He click Work button on CAD Now he Transfers the call to another extension from CAD The Agent1 is asked to choose Wrap-up data Once he chooses wrapup data Workflow Initiation exception is thrown
    Workaround: None
    Please rate useful posts...

  • What is a transfer curve and what does pre-flight mean when it says "transfer curve used"?

    What is a transfer curve and what does  pre-flight mean when it says "transfer curve used"?

    http://dx.aip.org/advisor/transfer_curve.html has some insight.
    Basically, someone who prepared the PDF or an image in it used a magic trick that could cause it to print differently from how it is on screen.

  • When exporting as aic cropping does not transfer the clips appear in the original size...

    When exporting as aic cropping does not transfer the clips appear in the original size...how can I fix this??  Aic seems to be the best quality - least compressed - so I would prefer to use it rather than the other options.

    ssprengel wrote:
    And if you go to Develop, and make your filmstrip thumbnails a little taller to make sure all the badges are shown, does a missing indicator show up, there?   Can you Export from Develop?
    If you click on the Photos that Failed to Export collection at the top right does the photo it highlight have a missing indicator?
    If you do a test export with just one photo, to your internal drive, does it work?
    I adjusted the height of the thumbnails. Still no exclamation points or question marks as noted here.
    Also, as to your second question, unfortunately no as noted here.
    And as to your last question, I have tried several times to export them to my desktop (which would be on my internal drive, not external). I've even gone so far as to put a copy folder of my original NEF files onto my desktop (7 gb worth) to see if that would help me export...it didn't.

  • When I place photos on the cloud to share with friends, the photo IDinformation I have entered with the photo does not transfer.  Is there a way to have the text follow the photo in the cloud?

    When I place an Aperture photo on the cloud to share with friends, the idenfifcation information I have entered for the photo does not transfer to the cloud and thus my friends get only the photo.  Is there a setting I am missing that would allow the text to go along with the photograph?

    The photo stream will transfer the EXIF information set by the camera and the filname/version name. Try to get any information you want to transfer into the filename by batch changing the filename with "write to master" enabled. Aloso, you can set a comment, when sharing the image to the Photo Stream.

  • I'm doing a transfer from one macbook pro to another. I have CS4 Photoshop Extended. When I go to open it on my new computer it says error 150:30.

    I'm doing a transfer from one macbook pro to another. I have CS4 Photoshop Extended. When I go to open it on my new computer it says error 150:30.

    Don't try transferring Adobe software. It rarely works and usually breaks the activation mechanism (150:30 error).
    Uninstall, run the Cleaner tool then re-install from scratch.
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • When trying to transfer a folder from external drive to "users" folder, it says it cannot be modified because it is required by OS X. What does this mean?

    When trying to transfer a folder from external drive to "users" folder, it says it cannot be modified because it is required by OS X. What does this mean? How can I transfer the folder?

    It sounds like you're trying to replace a home folder. Replace the contents of the folder instead, or use Migration Assistant.
    OS X: How to migrate data from another Mac using Mavericks

  • One of my apps does not transfer when I synch (I have tried several times): it is the Overdrive Media Console

    one of my apps does not transfer when I synch (I have tried several times): it is the Overdrive Media Console

    If you are a resident of the U.S, have iTunes 10.3, iOS 4.3.3, you can re download apps for free directly on the iPad.
    Tap the App Store icon, find the app: download
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • What does "Only DRM free/unprotected" mean when trying to transfer pictures and videos to my laptop?

    What does "Only DRM free/unprotected" mean when trying to transfer pictures and videos to my laptop?

    Only Digital Rights Management music and video which you do not own rights to copy or use cannot be placed on your device.
    songs you have paid for or own outright will not have those restrictions.
    hope that helped?
    Good Luck

  • When i transfer an episode of a tv show from itunes library to my device, does it transfer it in hd and sd, or only in hd?

    im trying to conserve space on my ipad, so i want to make sure that when i transfer my tv shows to ipad, it would be transfered in only one format, hd or sd

    Depends on what you pick.
    Default is hd copy.
    You can switch it to sd version only when plugged into iTunes. On the summary screen, scroll down and check option for standard def.
    It does not transfer both over, it's one or the other only.

  • When I transfer a playlist which I modified song ending times, it does not transfer to idvd project. Any suggestions?

    When I transfer a playlist, where I modified the songs ending times, it does not transfer as edited to my idvd slide show project. It reverts back to original song times. I am trying to edit songs to match slide show segments.
    Any suggestions?

    Use Garageband to edit the songs. Save them as new files for use with your slide show.  The modifications made in iTunes do not modify the song files, they only tell iTunes how to play the songs.

  • The information on my sim card does not transfer when i run isync

    macbook   Mac OS X (10.4.9)   The information on my sim card does not transfer when i run isync everthig else works fine . i have a nokia 6103

    Welcome to Apple Discussions.
    There's nothing unusual about that, as the SIM standard is not written to support external data exchanges. In order to synchronize your SIM-stored data, you must first copy or move each contact record into the memory location on your device reserved for contact records not stored on the SIM.

Maybe you are looking for