Rdk 03032 Every day, multiple times a day

Been getting rdk 03032 errors every day for the past week multiple times a day. I've had to reboot the X1 box multiple times each time, sometimes reboot the cable modem. This is getting crazy. I had a tech come out and do the install of the X1 back in July and the signals were checked then so I don't think the signals were bad. Any advice as to what I need to do?

renhoek wrote:
Been getting rdk 03032 errors every day for the past week multiple times a day. I've had to reboot the X1 box multiple times each time, sometimes reboot the cable modem. This is getting crazy. I had a tech come out and do the install of the X1 back in July and the signals were checked then so I don't think the signals were bad. Any advice as to what I need to do?Things change.... Signals change, weather changes, equipment breaks down... your best bet is to get a TECH back out to take a look at why you are losing connectivity so often... You can take a snapshot of your signal levels when the system is running poorly by going into System Diagnostics and finding your Upstream Power level, Downstream Power level and SNR... Post those levels here for others to see and comment on.

Similar Messages

Firefox asks me if I "want to connect to:" every website, multiple times per website; to the point now its so annoying, i don't even use firefox. What can I do to correct this? Do I have a virus?

when i initially open firefox, this is what pops up. This type of thing pops up multiple time per website.
Firefox
wants to connect to snippets.mozilla.com on TCP port
443(https). show details
its asks me if i want to allow" or Deny"
Similar pop ups come up continuously during my time on each site.

Firefox and other browsers would need access to ports 80 and 443 to work. I think you may want to enable port 80 and port 443 (when it asks) and choose '''Forever''' or at least '''Until Quit''' for a smoother experience. If you believe you downloaded Firefox from a safe site like mozilla.org and your PC is safe (like, there is no other rogue app that can hijack Firefox) then there shouldn't be cause for concern to give it '''Forever''' exception on ports 80 and 443.
edit:
"however it was working fine, until all of a sudden"
This may happen if Firefox was updated, because the old signature or hash stored by the security application for Firefox would change. This may also mean that the previous version of Firefox already had unhindered access.

Mails being received multiple times

Hi all
My father in law just called asking about this and I had no idea... Since yesterday, he has been receiving every email multiple times, on all his accounts, up to 10 times each. He deletes and deletes them and they keep appearing.
What could this be and how could he fix it?
thanks
J

HI,
From the Mac Mail menu bar click Mailbox / Rebuild.
The process can take a few minutes.
Hopefully that will put a stop to the multiple e-mails.
Carolyn

Every day, my keyboard and track pad don't work, so I have to shut my computer off and start it back up. It does this multiple times a day. What can I do to make it stop doing this?

Every day, my keyboard and track pad don't work, so I have to shut my computer off and start it back up. It does this multiple times a day. What can I do to make it stop doing this?

Try resetting your SMC and PRAM.
Resetting the System Management Controller >>
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

Why are Weekly Emergency Alerts now occurring multiple times every day?

Hi, up until recently, it seemed Weekly Emergency Alerts occurred Weekly, and Monthly occurred Monthly.Recently, it seems the Weekly EAS Alerts are occurring an average of 3 times every day, and I am wondering what has changed.It is getting annoying to experience an Alert every six hours or so, and makes little sense to me.Thank you in advance for any explanation or information.

I could be wrong, but I bet the EAS system (which Comcast has no control over) has taken a more aggressive stance on warnings after all the tornados and floods and fires the US is experiencing. I haven't seen an EAS since we had our last flood warning in Houston about 30 days ago.

Internet outage multiple times a day

I have a confusing problem that i've been constantly trying to troubleshoot myself but, i'm running out of ideas on what the problem is. If anyone can help it fix this issue, it would be GREATLY appreciated! My internet drops completely at random times of the day. Usually every few hours ( sometimes sooner). I've checked the lights on my modem multiple times when this has occured. All the lights show that i should have an active internet connection. I've tried to reset my modem multiple times and usually does the trick for a few hours, i figure its a modem defect. I've only had the modem for about a year now. This is a rather confusing problem to me and i'm not very familiar with how to post any information from my logs to identify this problem, so any help is greatly appreciated.

.Maybe this can provide some help. These logs popped up after the problem occured.

Mac Pro turns itself on every day at the same time

My Mac Pro suddenly decided to start turning itself on every day at 6:00:12pm local time (12:00:12AM GMT). It turns on at exactly 12 seconds after 6:00pm every day.
I recently upgraded to OSX 10.5 and installed the point update. It did it before the point update and continues to after the point update.
I have had it since April and it has never done this before. It did NOT do this under 10.4.
I have the options in system settings to NOT wake on LAN event and NOT restart after power failure. It is NOT set to automatically turn on but it is set to automatically turn itself off at 1:00am.
These settings have not changed since 10.4 and I have verified them. No other software has recently been installed since the update to 10.5. I did update the Wacom driver to the new Leopard driver. That is all. I have the Wacom tablet unplugged from the computer.
Any ideas?
Here is the console log from yesterday. It pretty much looks the same every day.
Log file:
Nov 18 18:00:12 localhost com.apple.launchctl.System[2]: kern.maxproc: 532 -> 512
Nov 18 18:00:15 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
Nov 18 18:00:15 localhost com.apple.launchd[1] (org.cups.cupsd): Unknown key: SHAuthorizationRight
Nov 18 18:00:15 localhost com.apple.launchd[1] (org.ntp.ntpd): Unknown key: SHAuthorizationRight
Nov 18 18:00:16 localhost kernel[0]: npvhash=4095
Nov 18 18:00:16 localhost DirectoryService[12]: Launched version 5.0 (v514)
Nov 18 18:00:16 localhost kernel[0]: hi mem tramps at 0xffe00000
Nov 18 18:00:16 localhost kernel[0]: PAE enabled
Nov 18 18:00:16 localhost kextd[11]: 412 cached, 0 uncached personalities to catalog
Nov 18 18:00:16 localhost kernel[0]: 64 bit mode enabled
Nov 18 18:00:16 localhost kernel[0]: Darwin Kernel Version 9.1.0: Wed Oct 31 17:46:22 PDT 2007; root:xnu-1228.0.2~1/RELEASE_I386
Nov 18 18:00:16 localhost kernel[0]: standard timeslicing quantum is 10000 us
Nov 18 18:00:16 localhost kernel[0]: vmpagebootstrap: 973126 free pages and 75450 wired pages
Nov 18 18:00:16 localhost kernel[0]: migtable_maxdispl = 79
Nov 18 18:00:16 localhost kernel[0]: 88 prelinked modules
Nov 18 18:00:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
Nov 18 18:00:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
Nov 18 18:00:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=2 LocalApicId=2 Enabled
Nov 18 18:00:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=3 LocalApicId=3 Enabled
Nov 18 18:00:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=4 LocalApicId=5 Enabled
Nov 18 18:00:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=5 LocalApicId=6 Enabled
Nov 18 18:00:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=6 LocalApicId=7 Enabled
Nov 18 18:00:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=7 LocalApicId=4 Enabled
Nov 18 18:00:16 localhost kernel[0]: Loading security extension com.apple.security.TMSafetyNet
Nov 18 18:00:16 localhost kernel[0]: calling mpopolicyinit for TMSafetyNet
Nov 18 18:00:16 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
Nov 18 18:00:16 localhost mDNSResponder mDNSResponder-164 (Nov 4 2007 13:23:04)[16]: starting
Nov 18 18:00:16 localhost kernel[0]: Loading security extension com.apple.nke.applicationfirewall
Nov 18 18:00:16 localhost kernel[0]: Loading security extension com.apple.security.seatbelt
Nov 18 18:00:16 localhost kernel[0]: calling mpopolicyinit for mb
Nov 18 18:00:17 localhost kernel[0]: Seatbelt MACF policy initialized
Nov 18 18:00:17 localhost kernel[0]: Security policy loaded: Seatbelt Policy (mb)
Nov 18 18:00:17 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Nov 18 18:00:17 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Nov 18 18:00:17 localhost kernel[0]: MAC Framework successfully initialized
Nov 18 18:00:17 localhost kernel[0]: using 16384 buffer headers and 4096 cluster IO buffer headers
Nov 18 18:00:17 localhost kernel[0]: devfsmakenode: not ready for devices!
Nov 18 18:00:17 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
Nov 18 18:00:17 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
Nov 18 18:00:17 localhost kernel[0]: mbinit: done
Nov 18 18:00:17 localhost kernel[0]: Security auditing service present
Nov 18 18:00:17 localhost kernel[0]: BSM auditing present
Nov 18 18:00:17 localhost kernel[0]: rooting via boot-uuid from /chosen: A3FDED86-37C7-3DF1-9FCC-6C589DDC1077
Nov 18 18:00:17 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Nov 18 18:00:17 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleAHCI/PRT0 @0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDri ver/ST3500630AS P Media/IOGUIDPartitionScheme/Customer@2
Nov 18 18:00:17 localhost kernel[0]: BSD root: disk0s2, major 14, minor 2
Nov 18 18:00:17 localhost kernel[0]: FireWire (OHCI) TI ID 8025 built-in now active, GUID 0019e3fffe8072a0; max speed s800.
Nov 18 18:00:17 localhost kernel[0]: Jettisoning kernel linker.
Nov 18 18:00:17 localhost kernel[0]: Resetting IOCatalogue.
Nov 18 18:00:17 localhost kernel[0]: Matching service count = 0
Nov 18 18:00:17 localhost kernel[0]: Matching service count = 18
Nov 18 18:00:17: --- last message repeated 4 times ---
Nov 18 18:00:17 localhost kernel[0]: AppleIntel8254XEthernet: Ethernet address 00:19:e3:66:97:7a
Nov 18 18:00:17 localhost kernel[0]: AppleIntel8254XEthernet: Ethernet address 00:19:e3:66:97:7b
Nov 18 18:00:17 localhost kernel[0]: Previous Shutdown Cause: 5
Nov 18 18:00:17 localhost mDNSResponder[16]: Adding registration domain tjasher.members.mac.com.
Nov 18 18:00:17 localhost mDNSResponder[16]: Setting up AutoTunnel address FD14:A58A:53D0:1166:0219:E3FF:FE66:977A
Nov 18 18:00:19 localhost fseventsd[42]: bumping event counter to: 0xfa0a6 (current 0x0) from log file '00000000000f52e0'
Nov 18 18:00:22 localhost kernel[0]: Intel8254x -- Link Down -- 00:19:e3:66:97:7a -- called by enableHardware() --
Nov 18 18:00:26 localhost kernel[0]: -- Auto-Negotiation Advertisement Register (04d) = 0xde1
Nov 18 18:00:25 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[37]: Login Window Application Started
Nov 18 18:00:26 localhost kernel[0]: -- Auto-Negotiation Link Partner Ability Register (05d) = 0x0
Nov 18 18:00:22 localhost bootlog[48]: BOOT_TIME: 1195430411 0
Nov 18 18:00:26 MacPro kernel[0]: -- Auto-Negotiation Gigabit Advertisement Register (09d) = 0xe00
Nov 18 18:00:26 MacPro kernel[0]: -- Auto-Negotiation Gigabit Link Partner Ability Register (10d) = 0x4000
Nov 18 18:00:26 MacPro kernel[0]: -- PHY Specific Status Register (17d) = 0x8040
Nov 18 18:00:26 MacPro xgridcontrollerd[28]: Error: controller missing password file "/etc/xgrid/controller/client-password"
Nov 18 18:00:26 MacPro com.apple.launchd[1] (com.apple.xgridcontrollerd[28]): Exited with exit code: 2
Nov 18 18:00:27 MacPro kernel[0]: Intel8254x -- Link Up -- 00:19:e3:66:97:7b -- called by interruptOccurred() --
Nov 18 18:00:26 MacPro rpc.statd[33]: statd.notify - no notifications needed
Nov 18 18:00:26 MacPro xgridcontrollerd[28]: Notice: controller failed
Nov 18 18:00:27 MacPro kernel[0]: -- Auto-Negotiation Advertisement Register (04d) = 0xde1
Nov 18 18:00:26 MacPro configd[15]: setting hostname to "MacPro.local"
Nov 18 18:00:27 MacPro kernel[0]: -- Auto-Negotiation Link Partner Ability Register (05d) = 0xcde1
Nov 18 18:00:26 MacPro /usr/sbin/ocspd[64]: starting
Nov 18 18:00:27 MacPro kernel[0]: -- Auto-Negotiation Gigabit Advertisement Register (09d) = 0xe00
Nov 18 18:00:27 MacPro kernel[0]: -- Auto-Negotiation Gigabit Link Partner Ability Register (10d) = 0x7c00
Nov 18 18:00:27 MacPro kernel[0]: -- PHY Specific Status Register (17d) = 0xaf08
Nov 18 18:00:27 MacPro kernel[0]: Intel8254X -- Negotiated Speed: 1 Gb/s, Duplex: Full, Flow Control: Receive Pause Enabled, Transmit Pause Enabled
Nov 18 18:00:27 MacPro kernel[0]: sandbox-exec 28 PARENTAGEEXEC_AND_DROPPROFILE SBF /usr/libexec/xgrid/xgridcontrollerd 13 (seatbelt)
Nov 18 18:00:28 MacPro kextd[11]: writing kernel link data to /var/run/mach.sym
Nov 18 18:00:30 MacPro com.wacom.wacomtablet[90]: TabletDriver[90]: Env RUNWITHLAUNCHD is set to 1
Nov 18 18:00:31 MacPro loginwindow[37]: Login Window Started Security Agent
Nov 18 18:00:31 MacPro Parallels[106]: Loading Hypervisor module...
Nov 18 18:00:32 MacPro com.apple.SystemStarter[31]: kextload: extension /System/Library/Extensions/hypervisor.kext is already loaded
Nov 18 18:00:32 MacPro kernel[0]: [Parallels] Parallels Hypervisor started.
Nov 18 18:00:32 MacPro Parallels[112]: Loading Monitor module...
Nov 18 18:00:32 MacPro com.apple.SystemStarter[31]: kextload: extension /System/Library/Extensions/vmmain.kext is already loaded
Nov 18 18:00:32 MacPro kernel[0]: [Parallels] Parallels VM observer thread started
Nov 18 18:00:32 MacPro Parallels[114]: Loading ConnectUSB module...
Nov 18 18:00:32 MacPro com.apple.SystemStarter[31]: kextload: extension /System/Library/Extensions/ConnectUSB.kext is already loaded
Nov 18 18:00:32 MacPro Parallels[116]: Loading Network module...
Nov 18 18:00:32 MacPro com.apple.SystemStarter[31]: kextload: extension /System/Library/Extensions/Pvsnet.kext is already loaded
Nov 18 18:00:32 MacPro Parallels[118]: Loading Virtual Ethernet module...
Nov 18 18:00:32 MacPro com.apple.SystemStarter[31]: kextload: /Library/StartupItems/Parallels/Pvsvnic.kext loaded successfully
Nov 18 18:00:33 MacPro kernel[0]: comparallels_kextPvsvnic1: Ethernet address 00:1c:42:00:00:01
Nov 18 18:00:33 MacPro kernel[0]: comparallels_kextPvsvnic0: Ethernet address 00:1c:42:00:00:00
Nov 18 18:00:33 MacPro ntpd[25]: bind() fd 28, family 30, port 123, scope 7, addr fe80::21c:42ff:fe00:1, in6is_addrmulticast=0 flags=17 fails: Can't assign requested address
Nov 18 18:00:33 MacPro ntpd[25]: bind() fd 28, family 30, port 123, scope 8, addr fe80::21c:42ff:fe00:0, in6is_addrmulticast=0 flags=17 fails: Can't assign requested address
Nov 18 18:00:33 MacPro Parallels[121]: Staring DHCP/NAT daemon...
Nov 18 18:00:33 MacPro pvsnatd[123]: en3: DHCP/NAT for 10.211.55.2-10.211.55.254 netmask 255.255.255.0
Nov 18 18:00:33 MacPro pvsnatd[123]: en2: DHCP for 10.37.129.2-10.37.129.254 netmask 255.255.255.0
Nov 18 18:00:34 MacPro Parallels[125]: Restarting InternetSharing...
Nov 18 18:00:34 MacPro Parallels[127]: Restaring CiscoVPN...
Nov 18 18:00:34 MacPro com.apple.SystemStarter[31]: /Library/StartupItems/Parallels/Parallels: line 62: /System/Library/StartupItems/CiscoVPN/CiscoVPN: No such file or directory
Nov 18 18:00:34 MacPro Parallels[129]: Initialization complete.

Updates installed by Software Update are "delta" updates - they go from 10.x.y to 10.x.y+1, and are customized for a particular Mac model. It appears that in this case they also patch some files instead of replacing them fully. The "combo" update will update 10.x.anything to the latest 10.x.y, it'll update any Mac model, and in this case it appears they contain full files instead of patches. The delta updater for 10.5.1 is about 39 MB; the combo updater is about 110 MB. You can download the combo updater from the Support site. Sites such as www.macfixit.com often recommend installing the combo updater instead of, or after, the delta updater, as it often solves mysterious problems. One specific example is the numerous "SUID" messages when doing a "repair permissions" - the combo update gets rid of all but one, and that one is specifically stated by Apple to be okay. Of course, no guarantees, but the combo updater is a reasonable thing to try.
Doug

Hard lock ups multiple times a day - How can I troubleshoot?

My machine locks up hard multiple times a day. If I happen to be sitting in front of it, I observe that the image on the monitors stops changing. Mouse and keyboard will not work at all (including Magic key SysRq sequences). I cannot ping the box from another machine. The system has not made it to 24 hours of uptime for some weeks.
I am beginning to suspect that this may be an issue with the NVIDIA driver, but that's only a guess since it's the only thing I've seen before that can lock up a machine hard like this. I have checked journalctl and the Xorg logs, but don't see anything telling.
What should be my next steps toward solving this issue?

When it locks up, do any indicators on the keyboard blink? That would be an indication of a kernel panic.
If there are no blinking lights, does it unlock eventually?
Has the machine ever been stable?
Have you tried installing a RAM test in your boot loader and running it?
Next, I would start blacklisting any kernel module you don't absolutely need to see if you can isolate it that way.
Also, this looks ominous:
Apr 29 07:49:48 lore kernel: This system BIOS has enabled interrupt remapping
on a chipset that contains an erratum making that
feature unstable. To maintain system stability
interrupt remapping is being disabled. Please
contact your BIOS vendor for an update
I redouble my suggestion you pare down loaded modules to try and isolate this.
Also, I see that it looks at the microcode
Apr 29 07:49:48 lore kernel: microcode: CPU0 sig=0x106a5, pf=0x1, revision=0x11
Apr 29 07:49:48 lore kernel: microcode: CPU1 sig=0x106a5, pf=0x1, revision=0x11
Apr 29 07:49:48 lore kernel: microcode: CPU2 sig=0x106a5, pf=0x1, revision=0x11
Apr 29 07:49:48 lore kernel: microcode: CPU3 sig=0x106a5, pf=0x1, revision=0x11
Apr 29 07:49:48 lore kernel: microcode: CPU4 sig=0x106a5, pf=0x1, revision=0x11
Apr 29 07:49:48 lore kernel: microcode: CPU5 sig=0x106a5, pf=0x1, revision=0x11
Apr 29 07:49:48 lore kernel: microcode: CPU6 sig=0x106a5, pf=0x1, revision=0x11
Apr 29 07:49:48 lore kernel: microcode: CPU7 sig=0x106a5, pf=0x1, revision=0x11
But I don't see it being updated. That might be normal for your processor, but double check that and ensure you have the microcode update stuff installed in the boot loader correctly.

I need to reset my time capsule/airport every day - time capsule has green light but I don't see any wifi signal on my mac and other computers.

as many of you do, I use time capsule as airport, too...
It worked fine for 6 months or so after I bought the new time capsule. (I bought it in September 2012.)
Since the beginning of this year, I had to reset, and power off and plug it in almost every week, then now I need to reset and power off and back on again every day...
When I first set up the time capsule, I followed the instruction with the manual.
But, now I am so lost and don't want to reset every day for wifi connection.
Anyone has problem like me or knows how to solve this issue?
Please help..
I have MacBook Pro OS X 10.8.4 & my roommates have PCs. (just in case if it helps...)

For PC it is important the wireless has names that are compatible.. short.. like 10 characters.. but 2-20 is fine. no spaces.. and pure alphanumeric.
Use WPA2 personal only.. with pure alphanumeric password .. again 10-20 characters should be fine.
The latest firmware is a dud. Go back to 7.6.1
Open the airport utility.. click on the TC and holding the option key click the actual version number..
Go back to 7.6.1 is simple.. just select it and away it will go.. ignore future requests for upgrade.. you can also tell the utility not to check weekly for updates. You will need 5.6 utility for this I think..
So do the firmware downgrade.
Then do a factory reset and follow the name information above.. for TC name as well btw.. wireless name/s and disk share name.. which by default is data and that is fine.
So some instructions in...
The Factory Reset.
Power down the TC.
Hold in reset. and keep holding it in. Be Gentle! It is a tiny surface mount switch with a plastic lever.. Attempting to push it out the other side of the TC will not make the switch turn on better.
(I fix TC and have several reset levers bent over and jammed or broken off).
Power on the TC.. remember with the reset held in.. this needs three arms.. a friend or power switch you can get to with your feet..
Keep holding in reset for about 10sec until the front LED flashes rapidly.
Release reset and wait .. the boot will be slow as it deletes previous setting.. only from router side and pulls out the factory defaults. No files are deleted on the hard disk.. but the name of the TC may change.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
Leave the package open on the desktop so you can see the file. AirportUtility56.pkg
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. If your Mac refuses to run the software, because it wasn’t downloaded from the Apple store, go to security in preferences and allow other software to work.. this is limitation of trade methinks. You can set back later if you like.
Now drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. in finder, open the new directory, drill down.. applications, utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall version 6 (now 6.3 if you updated) so don't try.. and you cannot or should not run them both at the same time.. although I have had no problems when doing so.
You can also load airport utility into a pc and get access to all the settings. Untick the box for firmware updates.. it will still bug you occasionally.. regardless of the setting.. just ignore it..
You might still need to do the occasional reboot of the TC as well.

Why do I need to reset my Airport Express multiple times a day?

I purchased an Airport Express (AE) in 2008. Ocassionaly since I've owned the device, I've had a problem connecting to it via iPod touch, iPhone, Macbook Pro, Macbook, etc. I would see the AE in my wifi router list, I just couldn't connect to it. I simple reboot always seemed to fix the problem. As time has passed, I found myself having to reboot it more and more often. Within the past few months, it seems to be a daily occurance. Within the past couple weeks, I've had to reboot it multiple times a day. I have also performed a facory reset via the button and via airport utility - neither seem to affect the issue.
I like the AE for the simple fact that it has AirTunes abilities, this is quite frankly the only reason I have it. I would like to replace it, but I fear another unit would have similar issues.
Is anyone else having these same problems on a 2+ year old AirPort Express? if so, is there a fix action? thanks.

Hi, I'm having the same problem and have to reboot my Airport Express at least once a day. It is extremely frustrating.
Firmware is 6.5
Hopefully someone can help us

Outlook and owa freezes every day, sometimes at the same time

Hello,
I have very strange problem! 2 users complain that the outlook hangs every day, approximately at the same time. But other 200 users work fine. I can't see any error on the mail servers ( two servers exchange 2010 sp 3 with dag) Outlook can hangs for 15 min
with user, who has mailbox 1,5 Gb and about 3-5 min with user, who has mailbox 150 Mb.
When outlook hangs, owa logon also hangs and then they start working simultaneously.
It doesn't depend on the server where I try to run owa. I tried to move mailbox to new database, but it didn't resolve my problem.
There are no any scheduled tasks on exchange servers at this time. No performans issues. Maybe some problems of connectivity with AD, but I don't see any suspicious event.

Hi,
It sounds like mailbox curroption. I'd suggest you move those two mailboxes to another mailbox database, and then try againt to see if this works.
We may also try New-MailboxRepairRequest. For more information, please refer to:
http://technet.microsoft.com/en-us/library/ff625221(v=exchg.141).aspx
http://blogs.technet.com/b/nawar/archive/2010/08/19/exchange-2010-sp1-new-mailboxrepairrequest.aspx
Hope it is helpful.
Fiona Liao
TechNet Community Support

What's the power of spending more time every day in your IT career ?

What's the power of spending more time every day in your IT career ?
When you do the research to find the factors of the successful people, you'll find that they ALWAYS spent a lot of time every day in their businesses.
The IT technologies change so fast and explode. The performance of IT people with 20 years experiences can be EASILY catched up by a IT people, maybe you, who has only 6 or 7 years or even less if you spend over 80 hours or even more every week on your job and on the latest technologies.
The reasons are listed below:
1. The out-of-date IT technologies is no use anymore. It's like the out-of-date IT books. The people with 20 years experience can't rely on his last experience any more.
2. If you spend 80 hours every week, you'll absorb doubled the knowledge and experience than the people who spends only 40 hours every week. You may catch up with him who has 20 years experiences with your 10 years experiences. Not only this, most of your knowledge and experiences are newer and useful than his.
3. Because you spend 80 hours, you have plenty of time to focus on your tasks. When the task comes in, you may finish your tasks many times faster than him and you may be the only person who still has the time to do any extra or urgent tasks. Because you have more time, you may prepare your next task to be ready to finish your next task even faster and you may absorb the latest IT technologies from a learner level to an expert level while other people is still doing his tasks. And due to your more spare time to learn the technologies all the time needed to do your task, you have much more knowledge needed to do your task and can finish your task much faster than others.
According to my experience, if the comparison of the knowledge the worker has is 1 to 5, the real hours needed to finish a task may be 1 to 10. In IT field, if you know how to do it, you need minutes, but if you don't know how to do it, you need months to do the error-try or starting to learn it and do it. Please notice that the knowledge can be used for many times and the 1 to 5 and 1 to 10 comparisons will repeat again and again. Without spending more time on getting more knowledge, the comparison of 1 to 10 is still happening.
4. Like trying to save the money, most of his 40 hours will be spent on his tasks. He may have only 5 hours left to learn new IT technologies. If you still need to spend the same time to finish your tasks like him, you still will have 45 hours to learn new technologies. You grow 9 times, 5 hours to 45 hours, faster than him. If you keep working and learning the new IT technologies 80 hours every week, you'll find that you'll need much less than 35 hours like him, you may have 60 or even more hours every week to do more tasks to get more experiences and to learn more latest technologies.
----- Someone asked me after read the above "You're absolutely right, but, what motivation can make people do that ?". I told him that "Don't ask me. Ask your boss" -----

1) LabVIEW is a graphical based programming environment and
LabWindows/CVI is a C based programming environment. Both can be used
for similar tasks. Users familiar with C may prefer CVI. LabVIEW is
typically easier to learn if you are unfamiliar with both.
2)
The Run-Time Engine is a separate component that can be installed to
execute LabWindows/CVI programs and LabVIEW programs. It is free of
charge for both LabVIEW and LabWindows/CVI.
3)
LabWindows/CVI does not convert any LabVIEW programs into C code.
LabVIEW programs are already compiled as you write them, so you won't
need to convert them to C to use them. You should see similar
performance in similar LabVIEW and CVI code.
Allen P.
NI

Render at a Specific Time Every Day

Is there a way to have a specific Final Cut Pro project to render automatically at a specific time every day?
I work at a CG house, and shots are updated at random intervals, but are always in a fixed, specific location. So by rendering out the project everyday we would always have an up to date complete edit. And by automating it it could be rendered off hours and be ready first thing in the morning for review.

Or page 548 of Volume III, if you're on Final Cut Pro 5 (FCStudio 1).
'Main Menu/Final Cut Pro/User Preferences/General tab'
FCS2 may allow specific time of day, but FCS1 simply lets you set a period of time (while the program is open, but idle). So set it for 2 hours, leave FCP open when your last editor leaves the office.
This also offers several choices on which sequences you actually want to 'auto-render'.
K

How do I schedule a task at a specific time of day, every day?

I am trying to use Timer and TimerTask to schedule an event at specific time of the day. It will basically stop all the logging archive the log file and start a new logfile.
I am just having trouble with scheduling it for every day at specific time (I am new to java and have not worked with date and time much). If someone can point me to some sample code or show me a brief example I would really appreciate it. I am about to pull my hair.
Thanks in advance!!!

hi
I assume you use the swing class. As you suggest, to schedule an event you have to use a timer. The delay of the timer can easy be calculated using GregorianCalendar objects. Create one for the current date/time by instantiating an object. Create a second and set the date to the next schedule date/time. Retrieve the milliseconds from both objects and calculate the differences.
best regards
benny

Wireless Router cuts out at the same time every day.

I'm having an issue with my WRT160N router. I'm noticing that my internet connection cuts out for about 5 minutes every day in between 5:30-7:30 pm. Without fail, every single day, I can count on it going out for about 5 minutes during this time. The desktop, which is wired, remains working during this time. I'm at my wits end here, since I'm an online student, and this is my best time to schedule quizzes and exams.
Any help would be greatly appreciated.
Thanks.

Is your network is secured?
If the network is not secured than put some security on the router or else if the network is already secured then try to increase the security level by WPA or WPA2.
Also change the network name to some unique name.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box.
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select TKIP...For Passphrase input your desired WPA Key.
NOTE : Passphrase should be more that 8 characters...

Rdk 03032 Every day, multiple times a day

Similar Messages

Maybe you are looking for