Rdp client to windows 2008

Are there possibilities to connect to win ser 2008r2 from a apple platform

And if there are TS/RD CALs involved on the server, go here:
http://social.technet.microsoft.com/Forums/en-ZA/winserverTS/thread/8e28b0af-b37 4-4ca0-a255-5fd854bdc7fa
Search for string "RESOLVED!" on the page and grab the leaked RDC 2.1.2. It solved the CALs issue for me.

Similar Messages

Tips For Installation of Migration Client on Windows 2008.

Hi All,
I am completely new to installation of Migration Utiliity.
If anybody have performed Installation of Migration Client on Windows 2008 machine For IPM 10g To IPM 11g data migration,
Please help me by suggesting tips...
Thanks in advance
Vikas
Edited by: 862821 on Feb 18, 2013 10:55 PM

Hi all,
I have installed migration client on IPM 10g machine.
From IPM 10g I want to export perticular application.
For which I have to configure that application in IPM migration tool for export.
I need steps to configure application in Migration client(10.1.3.6).
Please somebody help me ..
Thanks in advance
Vikas

T410 thin client RDP Client Error Windows XP SP3 issue

I've switched out the VMs they were connecting to completely and we're still running into this issue. The next step is switching out the thin clients themselves. Bump if anyone's run into this issue before.

I'm having an issue with 2 of my HP Smart Zero t410 thin clients. They each RDP into an XP SP3 virtual machine hosted on a virtual server running VWWare ESXi 5.0.0. Randomly in the morning they'll both disconnect from their virtual machines. Sometimes at the same time, sometimes not. I'm monitoring both the thin clients and the virtual machines with software that pings everything 30 seconds, nothing ever drops a ping. I've tested the wire, the wire is good. I've made sure the thin clients are up to date with the latest firmware. The last thing I've tried is replacing the switch both of these machines are connection. One thin client comes up with an error message "RDP Client Error: Reboot Necessary" then below "The firmware has experienced a critical error. Please reboot this client." After I close the error I can RDP back in. The other thin client also gives an "RDP Client Error" and down below mentions MANTICORE but I did not write down the entire error message. I have 30 other t410's deployed at various locations, all connected via RDP to a Windows Server 2008 R2 terminal with no issue for over a year. These last two have maybe in for three weeks and have continuously thrown this error randomly. Any help is appreciated.

Instant client on windows 2008 r2

Hi,
I've downloaded the zip files and followed the instructions here http://arswiki.org/wiki/Oracle_Instant_Client_-_Installing
For some reason I can't launch sqlplus.exe as it keeps crashing. I just get Oracle SQL*PLUs has stopped working, check online for a solution or close the program. I need to be able to install instant client version 10 on windows 2008 R2 successfully. Please help. Thanks.
ps: I've downloaded the zip files in 64bit also.
Edited by: 790040 on Aug 23, 2010 12:34 AM

Welcome to the forums !
Pl post this in the Instant Client forum - Instant Client
HTH
Srini

Issues installing 11g client on windows 2008 R2

Hi I am a windows admin and have been asked to install oracle SQL developer and oracle 11g client on a windows 2008 R2 server.
However it will not work.
After having issues and having to manually set environment variables and creating the folder path network\admin for the ora files, we still get the following issue
"IO Error: The network adapter could not establish the connection"
We have tried both 64 and 32bit versions.
Any help here would be very much appreciated.
Paul.

Thanks for everyones response to this.
First issue was the server we were installing this on is not on the domain and doesnt point to our internal DNS. Hence it couldnt resolve the Host name in the tns file.
I added this to the hosts file, then we had to modify some of the registry entries and path manually.
We were then able to succesfully make a connection.
Paul.

Oracle Client for Windows 2008 R2 server to connect to Oracle database 9iR2

Hi,
We are running Oracle 9.2.0.7 on Sun solaris (64 Bit) 5.10 and trying to install client on new Windows 2008 R2 (64 - bit) server. (Before this 2008 R2 we were using Windows 2003 32 bit and 9iR2 client was working great.) I can't install 9iR2 clinet and I tried installing 10gR1, 10gR2 and 11gR1 but none of them worked. It is only allowing me to install 11gR2. When I installed 11gR2 client I am getting some 'overflow exception on an arithmetic operation' error.
1.) Do I have any choice for client installation or only 11gR2?
2.) Any solution for overflow error?
Thanks,
-H

May I know the reason why ODBC driver is not include in option like Runtime?Oracle software utilizes SQL*Net (not ODBC) to connect to Oracle RDBMS.
ODBC is not required by Oracle client software to connect to Oracle RDBMS.

Oracle Client for Windows 2008 R2

is there a 10g or 11g cleint available for Windows 2008 R2? The latest Win64 or Windows 2008 clients all give me an error that saus it supports versions up to 6.0 and I have version 6.1

There is a work around that can help to install 11g release 1 on windows 2008 R2
The installer can be executed in compatability mode by right clicking on setup.exe and select "Troubleshoot compatibility" then "Troubleshoot Program" then check option "The program worked in earlier versions of windows......." then choose "Windows Server 2003 (with service pack 1)" and in the last step click "start the program" button.
hope tihs will start installing Oracle 11g Release 1 on Windows Server 2008

Oracle 11g Client on Windows 2008 6.1

Hi All,
Is Oracle Client 11.1.0.7.0 certified on Windows 2008 6.1 OS??
Thanks
SR

Only 11gR2 is certified on Windows 2008.
http://download.oracle.com/docs/cd/E11882_01/install.112/e10844/pre_install.htm#CIHIAGFG

Installation of Essbase 11.1.1.3 Client on Windows 2008 SP4 64bit

Hi all,
I`m trying to install Essbase Client 11.1.13 64bit on a Windows 2008 Server (64bit) . Setup runs fine but when I look into the installed directories and look for esscmd.exe oder essmsh.exe these files are not installed. The bin-directory contains only two files. startesscmd and startessmsh. When I want to reinstall it the setup program told me that the essbase client is already installed. So I delete the whole installation directory, the oracle directory, registry settings but setup still says that the essbase client is installed.
So how to run the setup again and what could be the problem that the client installation is incomplete?
Thx for your help
Brgds,
Millhouse

CL wrote:
Just out of curiosity, if you run startessmsh.bat, does it work?I wonder if he has deleted it :)
Millhouse wrote:
So I delete the whole installation directory, the oracle directory, registry settings but setup still says that the essbase client is installed.Have a search for .ora.products and delete or rename it if you find it.
Cheers
John
http://john-goodwin.blogspot.com/

Accessing client using Windows 2008 Terminal Service - Web Access?

Dear experts,
We are developing a network infrastructure solution for our new customer's B1 8.8 implementation.
Our customer would like to utilize Windows Server 2008 Terminal Service to connect B1 client in remote branch with server in head office area. And they want to use Terminal Service - WEB ACCESS. Base on our experience, we successfully implement B1 using Remote Desktop Connection or Citrix to support B1 client in the remote area.
My question is, Has SAP already support to utilize windows "Terminal Service - Web Access" to access B1 client?
If Yes then what are possible issues and solutions?
Thanks,
Indra

Hi,
when we said to customer that it is better to use citrix, they will see some concerns as follows:
1. Investment to buy citrix server
2. License of citrix
3. installation time for ICA client
4. maintenance cost for citrix and its server
The benefits are as follows:
1. Reduce cost to purchase B1 license. Remote and LAN users can access B1 through citrix
2. The connection speed. Citrix is more faster than RDC or terminal services either web access or not
3. The security reason. Check this link:
http://www.virtualizationadmin.com/articles-tutorials/terminal-services/management-tools/terminal-services-internet-information-server.html
In the support platform, there is no windows terminal services web access info. You may check it here:
http://service.sap.com/smb/sbo/platforms
The supported hosted environments are using citrix or windows terminal service. For remote users, the citrix is used for web access and windows terminal services are using IP and the connection is using internet (do not use VPN).
The citrix is not very expensive. We must make them realize the benefit.
Kita harus pastikan citrix itu bagus dan tidak mahal2 amat kok. Beli dari reseller citrix yang diauthorized tetapi tidak big company agar tidak mahal sekali. SAP AG menyarankan menggunakan citrix karena memang sangat bagus.
(in english : we must convince the customer about the citrixs benefit. it is not too expensive. The citrix could be buy from small reseller company so that its price is acceptable. SAP AG suggested to use citrix because it is very best web access).
I know bhs because I am from Indonesia hehehe....
JimM

Oracle client on Window 2008 R2?

Hi all!
I'm trying to install Oracle 9.2.0.1.0 client on a 64bit Windows Server 2008, without success. Best result I got so far is 'installed' client and provider, but unable to run the config tools, or use the provider.
Reason: I'm doing this is trying to integrate an old legacy Oracle 8.1.7 database with SQL Server 2008 R2 using linked servers.
Anyone has any guidelines and idea ? please help,
Thanks,
Angus

user10605622 wrote:
Hi all!
I'm trying to install Oracle 9.2.0.1.0 client on a 64bit Windows Server 2008, without success. Best result I got so far is 'installed' client and provider, but unable to run the config tools, or use the provider.
Reason: I'm doing this is trying to integrate an old legacy Oracle 8.1.7 database with SQL Server 2008 R2 using linked servers.
Anyone has any guidelines and idea ? please help,Install only supported combination of OS & Oracle.
For V9.2 Oracle find an old PC running Windows XP

Unable to install 64-bit Oracle ODBC Instant Client on Windows 2008 R2 machine.

I am trying to upgrade the Oracle ODBC driver from the 32-bit version currently installed (ODBC Instant Client Release 10.1.0.5.0, April 2006) to a newer 64-bit version but have not been successful. I have had success at uninstalling and reinstalling the existing 32-bit version package (release 10.1.0.5.0) however when I've tried to install the 64-bit ODBC Instant Client (Release 12.1, December 2012), I run the odbc_install.exe application inside the package. it appears to run without issue/compliant, but then I do not see the 64-bit Oracle ODBC driver anywhere, either if I go via the traditional Administrator Tools --> ODBC Data Sources or if I go to the c:\windows\syswow64\odbcad32.exe route. Further investigation into the ReadMe file (ODBC_IC_Readme_Win.html) reveals that you need the 3 DLLs oci.dll, oraociei11.dll and orannzsbb11.dll which the package does not come with. Where could I obtain the correct version of these DLLs or else where can I get an installation package which already contains them?
Any help with this is greatly appreciated. Thank you

Welcome to the forums !
Pl post this in the Instant Client forum - Instant Client
HTH
Srini

RDP Client Licenses; Server 2008 R2

MS documentation indicates that there is a 120 grace period for purchasing RDP licenses. From what I have read, there seems to be no restrictions on the number of users allowed to RDP in when licenses have not been obtained.
But Some have said that you may only be able to have a couple of users on the system -----which, again seems contrary to any literature I have seen,
Anybody got a clue?
thanks
a bunch,
Spatio

Hi,
There are no restrictions during the grace period. Without RD Session Host (RDSH) installed the limit is 2 Active sessions. The grace period begins when RDSH is installed.
-TP

Assistance needed during Oracle 11G R2 client installations in Windows 2008

Hi,
I am installing Oracle 11G R2 client in Windows 2008 R2 enterprise server. It has JR6 installed. But whenever I am launching the installer from OUI, I am getting the error 'Java: “Could not find the main class. Program will exit” and the installation is getting terminated. Any inputs/suggestions will be great for me.
Thanks in advance.

Hi,
are you able to run java manually? I.e. java --help in the cmd? Are your environment variables (JAVA_HOME) set properly?

Problem with update SCCM client to Sp1 CU3 on Windows 2008 server

Hi all,
I have problem with update SCCM client on Windows 2008 Server to 2012 Sp1 CU3. I have sent to deployment package with update (SP1 Cumulative Update 3 - server update) on four servers and after few minutes I have got in Monitoring\Deployment details four
this same errors in "Asset Details":
USER Message ID
Status type Description
NT\AUTHORITY\SYSTEM 1006
Error 3003
I love that types of error... which is har to find answer on google :-( I have tried but I haven't find any constructive :-( Did you met with something similar? Which log I should check (sorry - I'm still noob in SCCM2012) to update actual SCCM Client SP1
(5.00.7804.1000) to SP1 CU3 (5.00.7804.1400)?
Thank you.

I see in fodler with CU3 updates, are four packages:
- SP1 Cumulative update 3 - x64 client update
- SP1 Cumulative update 3 - x86 client update
- SP1 Cumulative update 3 - server update
- SP1 Cumulative update 3 - console update
It will be stupid but... maybe I should deploy x64 client update package?

Rdp client to windows 2008

Similar Messages

Maybe you are looking for