RDP from internet not working in Hyper-v VMs

Hello .
Sorry for my english .I hope to explain clearly my problem .
I 've Hyper-v on Windows 2008 server r2 . I've 3 Virtual networks ( External , Private and internal ) .
In my VMs there are two domains . The first one is bound with internal Vn and the second is bound with private Vn. My Host RRAS is configured to switch inbound connection RDP (3389) to a second RRAS (Virtual machine bound with private network) . Last
RRAS does port forwarding correctly to the machine for RDP connection ( port 3389) request .
RDP works only from host and VMs but not from internet in private vn.
RDP from internet connects but when try to configure session disconnects . Any ideas ?
Netstat says "SYN-RECEIVED" then disconnects .
All other services work fine (http mapped between RRAS host and RRAS vm i) and RDP works in private virtual network from internet . I think the problem is nat over nat for port 3389 in internet connection . I've tried to disable firewall but
not works .
Thanks

Also add firewall exception "from" any or specific ip "inbound" "to" whichever destination.
To truly test, you ca disable firewall, if it allows rdp session, then you know it is something with firewall.
Remember sometimes antivirus software includes firewall., and in the case of home routers, they have built-in firewall, and Windows also has firewall, so you must be sure to check ALL possible locations of firewall blocking and dropping (even server-to-server).
Basically you would be allowing inbound from your router, NATted through (or routed through) your network, to the destination or allowing inbound from server to server. Also
double check that your server NICs are not having any additional 2nd DHCP interfaces, if so, disable the secondary DHCP NIC and test again. And do:
traceroute
From Internet to the server having the issue and from server to server and it may uncover more details of where things are getting dropped.
I have heard also some ISPs may also try to block inbound RDP or 3389, so be sure and verify that as well.
Please mark as answer if I helped solve your issue. Thank you.
tnjman

Similar Messages

"Automatically retrieve CD track names from internet" not working

I'm about to begin re-ripping all my CDs (400+) which I haven't done since at least 14yrs ago in order to take advantage on newer/better formats. I was excited to see that iTunes can automate a lot of this process with the following two options:
- When you insert a CD: (Import CD and Eject)
- [ ] Automatically retrieve CD track names from internet
Found in the "Playback" settings of iTunes 10.1.1
However after inserting my first CD, I noticed it started to import without downloading the track names first. Obtaining track names manually is working for me because if I choose "Advanced -> Get track names" it accesses Gracenote DB and works fine.
It's just the automatic operation after inserting a CD that is not working. This causes me to have to:
1) Insert CD
2) Choose "Advanced -> Get track names"
3) Click "Import CD"
4) Eject
as opposed to the one supposedly promised step of "Insert CD" and have the other 3 things happen automatically.
I've tried deleting my iTunes plists in my ~/Library/Preferences/ folder but it still works the same.
Any suggestions?

You can seach the Gracenote site directly. I don't know if that would help you decide which option you needed to use.
http://www.gracenote.com/music/index_old.html

PDF Report from internet not working in XP, works in Win7

I have a report that I'm generating from a website. If I try to generate the report in WinXP, I get either "Cannot display webpage", even though my ping to that website never goes down, or the page just sits there blank. If I nagivate away from the page, I get a "Navigation tot his page has been canceled" message. I have let it sit there upwards of an hour.
If I try the same steps in Win7, the report pulls up within seconds with no issues.
I have made sure the same add-ons are enabled/disabled. I have made sure to allow add-on's from the website. I have made sure that both machines have the same version of Adobe Reader with all of the available updates.
I am at a loss for what to try. Any help is appreciated. Thanks.

Hi,
Could you please provide more information about this issue.
What is version for Reader you are using ?
What is version of IE ?
Can you please try with Reader version XI.
Regards,
Deepak

Internet not working and printer connected by cable but it is unable to communicate with the compute

Changed print cartridge and then problem started.
Internet not working and printer connected by cable but it is unable to communicate with the computer

Hi Joanna 59
Sorry to hear that you are having this issue and Hope you are well;
1.Do you see any light on the back on the printer where the cable is connected?
2. Do you see lights on the back of the router where the cable that comes from the printer is connected?
3.What type of cable are using to connect the printer? Have you try another cable to see if the problem is the current cable.
Please kindly include;
What router are you using (Brand and model)
Operating system i.e. Win 7
Complete Printer model
Thanks;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Airport: Internet not working

Airport has self assigned IP address and will not connect properly to the internet. Have tried manually entering the IP address from another computer on the same network but still cannot connect to the Internet...Any advice/suggestions much appreciated

See your other thread " Internet not working after turning Airport on".

HT4993 why does my internet not work when not connected to wifi?

why does my internet not work when not connected to wifi

Hi farmgirl0812,
Thanks for using Apple Support Communities. This article has steps to try if you are unable to connect to a cellular network:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Cheers,
- Ari

Internet not working after turning Airport on

Hello,
All of a sudden, I can not connect to the internet when I turn the Airport on. The signal looks strong. But when I open my browser, it gives an error page. On a cafe where there is a free wireless internet that I go to often and had no problems connecting, gave me this message recently.
IP Configuration
192.168.1.46 in use by 00:18:39:88:81:fc, DHCP Server 192.168.1.1
Is there anything that I need to update in my Airport settings? If so, where? I have been trying to look for that and don't seem to have any luck.
Thanks for any help.
Rich
G4 Mac OS X (10.4.8)

See your other thread " Internet not working after turning Airport on".

My internet not working

I must did something to my phone and the internet not working not on my wireless or att network that odd.
Safari could not open the page becuase the sever stopped responding that the error message but dail my phone still works.

I travel between Central New Jersey and New York City everyday, and EDGE has been awful for the past two weeks. In my wishful thinking, I've been turning flight mode on and off, and resetting the phone.
After seeing this, I can relax and put up with the crappy service
Today there is nothing...nada...zippo.

Connect is not working on Hyper-V Manager on Windows 8.1 ( vmconnect does not work )

Hi all,
I have been running Windows 8.1 and in Hyper-V Manager, i can see 2 VM ( 1 Linux-Ubuntu , 1 Win 7 ) for couple of months.
Few days ago as usual i wanted to connect one of them while they were running but it did not work. I tried actions below already:
- Checked the event logs and they were saying vmconnect is crashing
Faulting application name: VmConnect.exe, version: 6.3.9600.16384, time stamp: 0x5215cae5
Faulting module name: KERNELBASE.dll, version: 6.3.9600.17415, time stamp: 0x54505737
Exception code: 0xe0434352
Fault offset: 0x0000000000008b9c
Faulting process id: 0x6c0
Faulting application start time: 0x01d02e59f75297d7
Faulting application path: C:\WINDOWS\system32\VmConnect.exe
Faulting module path: C:\WINDOWS\system32\KERNELBASE.dll
Report Id: 351cf3fd-9a4d-11e4-beaf-7446a0bad879
Faulting package full name:
Faulting package-relative application ID:
=================================
Application: VmConnect.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.ArgumentException
Stack:
   at Microsoft.Virtualization.Client.Interop.IMsRdpClientNonScriptable3.set_NegotiateSecurityLayer(Boolean)
   at Microsoft.Virtualization.Client.InteractiveSession.RdpViewerControl.SetSecureModeOn()
   at Microsoft.Virtualization.Client.InteractiveSession.RdpViewerControl.CreateRdpClient(Boolean)
   at Microsoft.Virtualization.Client.InteractiveSession.RdpViewerControl..ctor(Microsoft.Virtualization.Client.InteractiveSession.RdpConnectionInfo)
   at Microsoft.Virtualization.Client.InteractiveSession.InteractiveSessionForm..ctor(Microsoft.Virtualization.Client.InteractiveSession.RdpConnectionInfo)
   at Microsoft.Virtualization.Client.InteractiveSession.VmisApplicationContext.TryParseCommandLine(System.String[])
   at Microsoft.Virtualization.Client.InteractiveSession.Program.Main(System.String[])
=================================
- Stop antivirus Avira, remove Hyper-V, restart add Hyper-V again, restart
- reboot, shutdown computer
- add new VM, delete existing one
-add/delete/modify virtual swtich and add/delete/modify virtual switch accordingly the connected VM
- restart Hyper-V Management services from services.msc
I dont know what is going on... When i open Hyper-V Manager i can start/stop VMs and i can see from preview that they are running.

Hi all,
A
After few months, problem occurred again and i could not install the windows from the scratch over and over again.
I started searching problem online and eventually i found the FIX.
Looks like Registry Entries are getting screwed up somehow.
My "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProvider" was looking exactly as below:
", schannel.dll"
And i made it as below:
"msapsspc.dll,
schannel.dll, digest.dll, msnsspc.dll, credssp.dll"
The solution for the other person in the link ( cannot share link since site does not allow me to ) as a source was only missing "credssp.dll" whereas i was missing everything except "schannel.dll". Strange...
============================
Adding credssp.dll to the list of SecurityProviders in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders
fixed it for me.
My full registry entry now reads "msapsspc.dll,
schannel.dll, digest.dll, msnsspc.dll, credssp.dll"
============================

Self-Assigned IP....Internet Not Working

Hi--
Let me start off by saying I have absolutely no idea how this happened. I went to start my Macbook this morning and the Internet didn't work. Usually this is not big deal, and I just unplug the router and everything works fine. However, this time (for whatever reason) was different. When I go to my network settings, it says "Self-Assigned IP" under Airport and that "AirPort has a self-assigned IP address and may not be able to connect to the Internet." I was browsing other forums, and found that sometimes renewing the DHCP lease works. I did this, and still no Internet.
How do I fix this??
Thank you.

Hi - this may help.....I sort of had the same problem with my wired connection.
Although I think my router is dying - I hooked my Macbook directly to my modem and my network said that it had a self-assigned IP address but could not hook up to the internet (although it had green lights for the Ethernet, Network settings and ISP)....
I used the 'Automatic' location and the DCHP with manual address setting (or it was the Manual setting) - I got told that what it is doing is just randomly selecting a IP address to use but the address it chooses isn't actually able to work...
(This what I was told) - I entered my IP address (I had copied it down from previous network setups) and I had to type in my router address (even though I wasn't using one I still had to have a number for it to use) - plus a subnet address.....
After that it picked up my internet and works ok......I have to get a new router so hopefully I can connect it all up as it was before.....
This may help - although my set up is slightly different....

MacBook Air internet not working

I have a MacBook Air and just the past couple days the internet is not working correctly. I go to Facebook and I can't scroll the screen or click anything. Other sites work for a bit then stop. I don't know if I have a virus or what is going on please help me. Also I had to use my iPhone to write this because of course my computer wasn't working.

Please answer as many of the following questions as you can. You may already have answered some of them. In that case, there's no need to repeat the answers.
Have you restarted your router and your broadband device (if they're separate) since you first noticed the problem? If not, do that now and see whether there's any change.
If your browser is Safari, then from the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Any change?
Quit and relaunch the browser. Any change?
Log out and log back in. Any change?
Are any other web browsers installed, and are they the same? What about other Internet applications, such as iTunes and the App Store?
If other browsers and Internet applications are also affected, follow these instructions and test. Any change?
If only Safari is affected, launch the Activity Monitor application and enter "web" (without the quotes) in the search box. If a process named "Safari Web Content" is shown in red or is using more than about 5% of a CPU, select it and force it to quit by clicking the X or Quit Process button in the toolbar of the window. There may be more than one such process. Any improvement?
Are there any other devices on the same network that can browse the Web, and are they affected?
If you can test Safari on another network, is it the same there?
If you connect to your router with Wi-Fi and you can also connect with Ethernet, do that and turn off Wi-Fi. Any difference?

Internet not working please help!!!!

hi i jus tried to download abode falsh player on my computer. it all downloaded fine and then when i went to go onto the internet my main search page is called babylon. the computer lets me on the internet and then as soon as i log onto facebook hotmail etc it comes up with internet explorer not working.it goes to troubleshooting but comes up with nothing wrong,what have i done??? i need to be able to log into my hotmail as i do all my own work invoices and have to sent them on but my computer now wont let me.please help. ive deleted all the things i downloaded and turned the computer off but still made no difference.please help thanks

steph,
Please re-state your premise.
1) Did you actually download and install an alleged adobe flash player, or not?
2) Was this download a "pop-up" during a browser session, or a "pop-up" on the taskbar?
If it pops up from the browser session, always ignore it. Go to the offical webpage and then download.
3) Was "babylon" your original main search page, or did you get it with the download install?
You could attempt to fix it with a restore point prior to the install of this program.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Internet not working on OS 4.0.2

hi,
after updating to OS 4.0.2 from OS 3.1.3 on iphone 3gs, internet(3G) not working.
only mail works on 3G networks. dont know how.
except mail nothing works.
can anybody tell me how to fix the problem?

Have you tried the basic troubleshooting that is documented in the users manual?
Reset network settings, Reboot the device, restore by backup, restore as new?

Upgraded to Lion-internet not working, lost Itunes account

Internet/ wifi not working since I upgraded to Lion, I also lost itunes (being advised to install latest version.) I did back up the laptop prior to upgrading.....
COME ON APPLE- THIS IS STUPID!!!!!

It's the lion's wifi it's vary sensitive to the signal! you need a version R router bought a Time capsul it's an R.Move your router away from any metel and see if it helps. I just got a 27' imac i7 2TB/SSD my Toshiba i7 worked fine on my old router in a metel shelf unit not this mac! So I bought the Time Capsule $300.00 ouch! my Mac/lion is blazzing fast know and so is my Toshiba i7 windows.The $100. routers in the stores are most likly version R as well but the TC runs 2.4 or 5 GHz at the same time or fix it eather alone. Plus a 2TB back up drive! Now this is not the only problems your going to have with the new OS lion system it went away from Roseta so older softwair dosent work and your chaseing the net for drivers!!!!

IBook G4 internet not working

My iBook G4 is about 4 years old. It has been working fine but yesterday the internet stopped working, which is odd because it works on my MacBook. Any suggestions? I'm not very computer savvy. Thanks!

Welcome to Apple Discussions!
Is the airport icon still in the menu bar? Is it turned on?
If so, go to System Preferences>Network and highlight Airport. Then click on "Assist me..." at the bottom and let the assistant help you to troubleshoot the connection.
That's the first thing to try. If it doesn't work, or if your icon is missing from the menu bar, post back.
Good luck!

RDP from internet not working in Hyper-v VMs

Similar Messages

Maybe you are looking for