RDP Port not Listen in Windows Server 2008 Std With Sp2

Hi all
I have Windows 2008 Server Std with SP2 Domain Member Server..  From Last week On-wards , am not able to take remote desktop control .. But i can able to Ping my Server from network .. I check remote settings on that server.. It
is enabled.. and also remote desktop service(Terminal service) was started successfully..  I checked my network firewall for port(3389) blocking.. But there is no much block in my network firewall.. i also disabled windows firewall in my server.. But
still i couldn't able to take RDP.. I also checked my Domain GPO and Local GPO settings for RDP Block.. But there is no such settings enabled.  I did following Troubleshooting Steps, but still the problem persist
1. Telnet serverip 3389
 Result : Could not open connection to the host, on port 3389: 
2. netstat -n -a -o | find "3389" (i run this command in my RDP Problem server)
Result : nothing displayed (3389 port not listed )
3. i again & again restarted Terminal service and the server, but still problem exists
4.i changed the RDP port no and restarted the service as well as the server , but still problem exist
5. I checked all RDP related Registry settings , everything is perfect
Please help me to solve this issue
I need your valuable reply urgently
Thanks in advance

Hi Mohamed,
You mention, that you the server is not listening to port 3389 when you run netstat. This is the reason why telnet and RDP connectivity fails in a first place. You also said that you changed the RDP port number. What was is before the change, and to what
did you change it to?
Please verify if the Terminal Service is listening to 3389 (0xd3d) with following command:
reg query "HKLM\System\CurrentControlSet\Control\Terminal Server\WinStations\RDP-Tcp" /v PortNumber
Output:
PortNumber    REG_DWORD    0xd3d
Try to enable the Operational log for TerminalServices-RemoteConnectionManager events in Event Viewer:
Open Event Viewer
Navigate to Applications and Service Logs\Microsoft\Windows\TerminalServices-RemoteConnectionManager
Select the Operational log and chose Enable Log
from the Action or context menu
Restart Terminal Services service
Then consult this event log and the System and Application logs for any related errors and warning. It might be helpful to post relevant event log entries here.
Additional information and solutions about Terminal Server Listener events and errors can be found here:
http://technet.microsoft.com/en-us/library/cc727385(v=ws.10).aspx
Regards,
Johann
// Johann

Similar Messages

  • I can not update a Windows Server 2008 R2 with Software Update Group in SCCM2012

    Hi all,
    I got some problems with update deployments these days.
    I try to configure SCCM2012 to update 1 Windows Server 2008 R2 (with Hyper-V / This server is in a cluster)
    Actually i've 4 other Hyper-V servers and i would like to add one more in the cluster called Hyper-V5. To do that i need that all Hyper-V servers use the same Windows Updates.
    I created a collection for my Hyper-V servers and then a Software Update Group with all needed updates (checked the list of another HV-Server).
    I did a deployment on this collection using this new Software Update Group.
    I checked the Sofwtare Center's logs on the Hyper-V5 server and i saw that synchronization has a successfull state.
    But there is no updates installed or displayed in Sofwtare Center.
    Here is some screenshots : Oh no i can't post image because ... "Body text cannot contain images or links until we are able to verify your account." waiting to be verified since months.
    Thanks for your help.

    Hi,
    Have you try to run Software Updates Scan Cycle and Software Updates Deployment Evaluation Cycle Actions on the client? Please check ScanAgent.log and PolicyAgent.log to see whether the client received the updates deployment policy.
    Best Regards,
    Joyce Li
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Web Service Client(Console App) not working on Windows Server 2008 R2 Standard Edition

    I am trying to consume an ASMX Web Service in a console app, its working fine in Windows 7,Windows Server 2012 Standard,Windows Server 2008 R2 DataCenter,Windows Server 2008 R2 Enterprise, But its not working in Windows Server 2008 R2 Standard Edition which
    is the deployment server.
    I tried consuming the ASMX web service using Web Reference and Service Reference as well but its not helping. Its throwing up the following error,
    Message:There is an error in XML document (1, 331491).
    Inner Exception : System.Xml.XmlException: '.', hexadecimal value 0x00, is an invalid character. Line 1, position 331491.
    The scenario is that i call the web service and it returns me an XML i am not able to receive the XML on Windows Server 2008 R2 Standard Edition.
    Please provide suggestions on this I need to resolve this ASAP.

    Hi,
    This question is better asked here:
    http://social.msdn.microsoft.com/Forums/en-US/home?forum=asmxandxml
    Experts here are more familiar about it and they can give you more efficient suggestion.
    Thank you.

  • Hard drive not recognized during windows server 2008 setup

    hard drive not recognized during windows server 2008 setup

    Hi,
    Whether the hard disk is recognized in BIOS?
    Connect it to another computer to see if it could be recognzied incase the cause is the disk itself. Also please check if it is really a RAID instead of a single hard disk - a single disk should be recognized directly while RAID cannot be recognized until
    a suitable driver is installed.
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Addon not working on Windows Server 2008 OS

    Dear Friends,
    I have developed an addon in XP and its working fine with XP operating system but it is not working on Windows Server 2008 Standard. Error is "An Attempt was made to load a program with an incorrect format.(Exception from HRESULT: 0x8007000B)".
    Regards,
    Mahesh.
    Edited by: mahesh A on Sep 19, 2009 9:26 AM

    Hi,
    Since only Windows 2008 SBS is supported with SAP Business One and that Server is available for 64bit Hardware as defined by Microsoft, I guess you should look into that direction.
    Regards
    Mario

  • Group Chat feature in Office Communications Server 2007 R2 does not work in Windows Server 2008 R2 domains

       Hello to all, there are two confliting articles about this topic:
       1-
    http://technet.microsoft.com/en-us/library/upgrade-domain-controllers-to-windows-server-2008-r2(v=ws.10).aspx#BKMK_Whatsnew : this one says that it does not work "The Group Chat feature in Office Communications Server 2007 R2 does not work in Windows
    Server 2008 R2 domains". This article was updated in 2013.
       2-
    http://technet.microsoft.com/en-us/library/ee692314(office.13).aspx: this other article says that it will function "Office Communications Server 2007 R2 Group Chat will function in a Windows Server 2008 R2 forest". This article was updated in
    2010 and was refered by the first one.
       What is the correct support position for Group Chat feature in Office Communications Server 2007 R2 and Windows Server 2008 R2 domains?
       Regards, EEOC.

    Hi,
    I notice the following sentence in the link below “Office Communications Server 2007 R2, Group Chat will not function in a Windows Server 2008 R2 forest or when Group Chat member servers are joined to a Windows Server 2008 R2 domain.
    We know of an issue with changes in Windows 2008 R2 that requires a Group Chat Client and Group Chat Admin Tools hotfix. The Group Chat Client and Group Chat Admin Tools hotfixes are currently scheduled for mid-April 2010.”
    http://blogs.technet.com/b/nexthop/archive/2010/11/06/supportability-for-office-communications-server-2007-r2-and-windows-server-2008-r2.aspx
    So in my opinion, if you update to the latest version of Windows Server 2008 R2, OCS Server 2007 R2 and Group Chat Client, Group Chat Admin Tools to the latest version, it should work.
    However, the best method for you is make a lab to test the problem firstly.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • Hp deskjet 2545 printer driver not supporting on windows server 2008 r2

    I have purchased a 3 in 1 hp deskjet 2545 printer. I am trying to configure in on my home laptop (HCL) operating system: windows server 2008 R2, but unable to configure it. customer support executive told me hp deskjet 2545 printer driver is not compatible on windows server 2008 R2.  but I have checked in my office and it is working fine on my office 2008 server. Please help.

    Hello Arvindk,
    Welcome to the HP Support Forums! I understand you are trying to use your HP Deskjet 2545 with your Windows Server 2008 R2. Because you are using a server your question will be best answered on the Commercial Forums: http://h30499.www3.hp.com/hpeb/ 
    I was able to find this document for Installing the Printer Software on Windows Server 2003 or 2008, which may be helpful for you.
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Mouse not working in Virtual machine (win2k3 32 and 64 bit) on Windows Server 2008 RC1 With Hyper-V Technologies

    I have installed two virtual machines(win2k3 32bit and win2k3 64bit ) on Windows Server 2008 RC1 With Hyper-V Technologies (Beta) enterprise. Mouse is getting lost inside VM (using CTRL+ ATL +  LEFT ARROW  comes mouse control control in host OS).
    Is there any setting to make mouse works? Insert Integration Serice setup Disk operation succeeds.

     all credits for mike_something
    The problem is that the old mousedriver is hooked to the mouse device class.
    To remove this dependency, go into the registry and navigate to the key
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E96F-E325-11CE-BFC1-08002BE10318}
    Remove the value msvmmouf from the UpperFilters Regvalue.
    Reboot....
    tadaaa!!
    If you wish you can take out the drivers completely by deleting these registry hives completely :
    The driver:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\msvmmouf
    The Service:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\VPCMap
    The CopyHook Shell Extension: ( for folder access )
    HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{30C14BA C-122C-42ED-B319-1139DBF48EB8}\InProcServer32
    HKEY_CLASSES_ROOT\Directory\shellex\CopyHookHandle rs\VPCCopyHook
    After a reboot you can delete the "Virtual Machine Additions" folder from program files...
    Good Luck!

  • [Forum FAQ]How to upgrade Windows Server 2008 R2 with a GUI to Windows Server 2012 Server Core

    We found that some customers willing to upgrade Windows Server 2008 R2 GUI to Windows Server 2012 Server Core recently. This article provides detailed steps to perform the upgrade.
    Analysis
    Upgrading from Windows Server 2008 R2 with a GUI installation to Windows Server 2012 with Server Core directly
    is not supported. If you do that, you will receive the error message below(Figure 1) in Compatibility report: 
    Figure 1.
    In these scenario, you can upgrade to Windows Server 2012 firstly. After the upgrade process is completed, you can switch freely between Server Core and Server with a GUI modes.
    Produces
    You can follow the steps below to perform an upgrade from Windows Server 2008 R2 with a GUI installation to Windows Server 2012 Server Core mode:
    1. Upgrade to Windows Server 2012 with a GUI mode
    1) Firstly, please boot into Windows Server 2008 R2 with a Windows Server 2012 installation DVD inserted.
    2) Select the operating system you want to install with a GUI mode.
    We can see 2 options (Server Core Installation or Server with a GUI) for each operating system version. (Figure 2)
    Figure 2.
    Note: Please make sure you have enough disk space on system partition. Or you will get such an error in Compatibility report.(Figure 3)
    Figure 3.
    After the Compatibility check, the installation will continue. It will take several minutes until upgrading is done.(Figure 4)
    Figure 4.
    2. Switch the GUI mode to Server Core
    Method 1: Using Server Manager
    1) Open Server Manager, click
    Manger and select “Remove Roles and Features” to start the
    Remove Roles and Features Wizard.
    2) In Features,
    uncheck the box next to the “User Interfaces and Infrastructure” option, and then click “Next”. (Figure 5)
    Figure 5.
    Now tick the “Restart the destination Server automatically if required” box, then click “Remove”. (Figure 6)
    Figure 6.
    Method 2: Using Windows PowerShell
    There are multiple ways to remove the GUI via Windows PowerShell, we introduce the way of using the ServerManager module.
    You can also run the commands in Windows PowerShell with an administrator to remove the GUI feature:
    “Import-Module ServerManager”
    “Uninstall-Windowsfeature Server-Gui-Shell –Restart”
    or
    “Uninstall-WindowsFeature Server-Gui-Shell, Server-Gui-Mgmt-Infra –Restart”
    It will take a period of time to remove the GUI feature and reboot. When the system boots up, you will get into the Windows Server 2012 with Server Core mode. (Figure 7)
    Figure 7.
    More information:
    Switch between Full and Server Core in Windows Server 2012 using PowerShell 3.0
    http://blogs.technet.com/b/puneetvig/archive/2012/10/16/switch-between-full-and-core-in-windows-server-2012-using-powershell-3-0.aspx
    Windows Server Installation and Upgrade
    http://technet.microsoft.com/en-us/windowsserver/dn527667.aspx
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    Hi,
    Brian is right, for mange the Server 2008r2 sp1 we recommend use the Windows 7 or 7.1 platform.
    More information:
    Remote Server Administration Tools for Windows 7 with Service Pack 1 (SP1)
    http://www.microsoft.com/en-us/download/details.aspx?id=7887
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Which version of Windows Server 2012 needs to be ordered so that I can downgrade to Windows Server 2008 64bit Standard SP2

    Dears in Microsoft,
    We need to have Windows Server 2008 Standard SP2 64bit to be installed and due to the fact it is no more available in Microsoft.
    I am going to order Windows 2012 with 16 CAL in order to downgrade it to Windows 2008 Standard SP2 64bit. My question is:
    1. Which version of Windows Server 2012 needs to be ordered so that I can downgrade to Windows Server 2008 64bit Standard SP2?
    2. what else required in terms of product key, media, license...etc?
    Appreciate your kind supports.
    thanks and best regards
    Barznj Abdullah

    Any licensing questions are always best addressed by a trained Microsoft licensing specialist.  You can find whom to call by looking at www.microsoft.com/licensing.
    One of the built-in rights of a Windows Server license is the right to run earlier versions of the operating system.  So if you purchase either Standard or Datacenter, you can run 2008 Standard.
    However, that does not provide the media or activation codes for earlier versions of the operating sytem.  You have to obtain those via other channels.  You should most likely contact a Microsoft reseller and talk to them.  They will
    most likely have a trained licensing specialist on hand to help answer your questions, and they should also be able to provide media for earlier distributions (for a slight fee).
    .:|:.:|:. tim

  • Can not update on windows server 2008 R2

    Hi All
    I have been trying to update windows server 2008 R2 after doing a fresh install. i have used HP smart Start to do the install.
    I have a HP ML 350 G5 Server  
      this is the 3rd time i have tried to install . first time i used smart start and
    selected custom install and all the required drivers and updates downloaded from hp fine. i can connect to the internet fine but when i click windows update it starts checking for updates finds something some thing which i think is the update manager. then blanks out
    the down load screen and then it comes back on with windows could not search for new update error code 80072F8F. the second i just went with a streight install with out smart and got the same results then with smart start but express install. again with the
    same results.
    under update history i have windows update agent 7.6.7600.256 successful important 5/2/2011
    any help would be very greatfull
    Many thanks
    Richard C

    Here are some possibilities:
    Are the date and time correct? (See Windows Update error 80072f8f)
    Temporary connection-related errors may occur when you use Windows Update or Microsoft Update
    Jason Warren
    @jaspnwarren
    jasonwarren.ca
    habaneroconsulting.com/Insights

  • DBCA error ORA-01034 oracle not available on Windows server 2008 r2 64

    Hi All,
    I have installed oracle 11.2.0.1 on my system having OS Windows server 2008. Then after that through DBCA i was creating the database during that i got ORA-01034 oracle not available. if any body know how to resolve it please reply me.
    Thanks & Regards,
    Arya

    Did you got the error in between when DBCA executed some percentage of work? PLease check its logfiles to get the exact error.

  • IE is not showing on windows server 2008 after updates

    Hi,
    I have installed Window server 2008 R2.
    After installing i found IE 8 on the server, but after 1day it automatically updated some softwares and now IE is not showing on my system.
    i.e IE uninstalled after the updates to the windows server.
    Please can some one help me to get the IE. I tried installing IE8, IE9 after downloading but it is showing "Internet Explorer 8 is not supported on this operating system"
    Regards
    Krishna

    Hi,
    Internet Explorer 8 runs on any of the following operating systems: 
    Windows Vista, 32-bit versions      
    Windows Vista, 64-bit versions      
    Windows Vista with Service Pack 1 (SP 1) or a later version      
    Windows XP, 32-bit versions with Service Pack 2 (SP2) or a later version      
    Windows XP Professional, 64-bit Edition      
    Windows Server 2003, 32-bit versions with Service Pack 2 (SP2) or a later version      
    Windows Server 2003, 64-bit versions with Service Pack 2 (SP2) or a later version      
    Windows Server 2008, 32-bit, or a later version      
    Windows Server 2008, 64-bit, or a later version 
    Please expand the below path to check whether IE is there:
    C:\Program Files\Internet Explorer
    Regards,
    Yan Li
    Regards, Yan Li

  • Ethernet controller driver not installing after Windows Server 2008 installation on Cisco UCS blade

    I am using MDT 2010 to deploy Windows Server 2008 to a Cisco UCS B200 blade. The OS and hotfixes install with no problem. The system reboots and attempts to connect to the deployment share to continue with the task sequence and I receive an error stating
    "A connection to the deployment share could not be made. The following networking device did not have a driver installed. PCI\VEN_1137&DEV_0043&SUBSYS_00481137&REV_A2"
    The driver in question is the driver for the Ethernet controller for the UCS blade. More specifically, it is the network driver for the Palo card in the UCS Chassis. When I Ignore or Abort the install, I am able to manually install the driver and restart the
    task sequence. The build then completes successfully with no further issue. I just cannot seem to automate the driver install. Has anyone dealt with this type of issue?

    Vik and stealthfield - thank you for your responses.
    I was preparing a script to manually move the driver into the c:\windows\inf location when I had to stop to create a new task sequence for a different build. It was while building this task sequence that I found the soulution to the problem.
    In the Post Install -> Inject Drivers step of the Task Sequence, I noticed that it was executing a command of type "Inject Drivers" with a selection profile of "All Drivers" and "Install only matching drivers
    from the selection profile" selected.         
    I changed this to run a command of type "Run Command Line" and specified that it execute "%Scriptroot%\ZTIdrivers.wsf". I noticed that this was selected in one of my other builds that was working properly, so I thought I'd
    give it a try. - IT WORKED.
    So to sum up, the solution was to change the type of command being executed in the "Post Install -> Inject Drivers" step of the task sequence. After this change, the machine came up and continued the task sequence with no further issues.
    Thanks again for the responses - They were helpful and I do appreciate it.

  • Colour Laserjet CM 1312nfi mfp not scanning on windows server 2008 r2

    I am running windows server 2008 r2. I have a Colour Laserjet CM 1312nfi mfp. Server does not pick up scanner. Is their software or utility to solve te problem. No software on Hp website.

    Hi,
    Hope the below document will help you.
    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?spf_p.tpst=kbDocDispl...
    Regards
    Suganya

Maybe you are looking for