RDP resolution and scaling level issues between two Win8.1 systems

I'm trying to follow along with this blog post that describes RDB 8.1 resolution and scaling level updates:
http://blogs.msdn.com/b/rds/archive/2013/12/16/resolution-and-scaling-level-updates-in-rdp-8-1.aspx
I'm connecting from one Win8.1 Pro system to another and the scaling level control on the Display control panel, I'm getting an error message that says "The
display settings can't be changed from a remote session". Both copies of Win8.1 are Pro editions and have had all updates installed.
Shouldn't my install mean I've got RDB 8.1 with the latest video drivers and that I should
be able to make these changes? Thanks.

Hi Chris,
To verify, if you open a dialog on the remote system, for example, System Properties, and open the same locally and place them side by side, are they the same size, fonts, etc?
I need to do some testing to verify that auto scaling is not limited to Enterprise SKU. If we do not get it solved in the next day or so then I may want you to do a screen share and show me what is happening so that I can investigate further.
-TP

Similar Messages

Replication issue between two APO systems

Hi,
I have two APO systems. I am trying to replicate the Forecast data from one system to the other. In the first system, I created the Export data source of the Forecast infocube. In the second system, I created a data target and used the extracted datasource from the first system as the info source. Now the issue is that the data is getting updated in the second system except for the one plant where the data is erroring out. When I look at the error, the data seems to have been offset by a character to the left. The error is happening to only this one particular plant. I checked up the plant information in both the systems and it looks alright. Any ideas why only one plant is affected?
Best Regards,
Jai

Please ignore this issue. I found out the data was bad. Unable to delete this question.
-jai

Is it possible to share 1 bluetooth keypad and 1 mouse pad between two computers in target mode?

Is it possible to share 1 bluetooth keypad and 1 mouse pad between two computers in target mode? Grab a drink and let me tell you my story.
I purchased two computers... an iMac 27" i7 3.4 16GB RAM and a Mac mini 2.3 i5 8 GB RAM. Both have Thunderbolt capability and are in fact connected by thunderbolt. I have 3 problems...
1. My Mac mini WILL NOT recognize any bluetooth keyboard. Let me back up for clarification. I set my iMac up first. No problems there. I then went on to set up my mac mini. A couple of interesting things happened concering bluetooth activity. First thing is that the keypad, which was already paired with my iMac wouldn't be recognized by the mac mini, and yet my bluetooth mouse which was paired with my iMac became paired with my mac mini and thus wouldn't be recognized by my iMac anymore. I had to go to my back room and dig out my other bluetooth mouse so that my iMac would at least recognize my second mouse. So now I have two "mice"presently. One for the mac mini, the other for the iMac. Thankfully I also had a USB keypad for my mac mini. My bluetooth keypad is still paired with my iMac but won't pair with my mac mini, which brings me to another question....
2. CAN 1 KEYPAD AND 1 MOUSE PAIR WITH TWO DIFFERENT COMPUTERS SO THAT WHEN I GO INTO TARGET MODE VIA THUNDERBOLT I CAN USE THE SAME KEYPAD AND MOUSE FOR BOTH COMPUTERS? Anybody have some thoughts on that problem?
3. WHY IN THE WORLD IS MY MOUSE CURSOR DISAPPEARING EVERYTIME I EXIT TARGET MODE VIA PASSWORD AND COMMAND F2. I'm using target mode to access my mac mini. But when I exit target mode to get back into my iMac I'm looking at my iMac screen but I can't see the mouse pointer! I can move the pointer around even though I can't see it. Wierd. And this has apparently been going on for some time with other users for over a year. I am presently completely up to date on Lion updates. Both systems are running 10.7.4. Does anyone have a solution or heard a rumor of a solution coming soon regarding the invisible mouse cursor "curse". I hate having to restart my iMac everytime I exit out of target mode just so I can get my mouse cursor visible again.
Food for thought.... Wouldn't it be really cool to have a target mode capability to see your other computers desktops in seperate window screens on your main display. You then could go back and forth from each window by just double clicking or by certain key commands. You could drag and drop from desktop to desktop. Tell me this is coming soon.
Thanks

There was a duplicate post of this question answered at:
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HExpertOnly=&HFORCEKWTID=8448:5&HOID=50650000000800000065190000&UCATEGORY_0=_26_%24_13_&UCATEGORY_0=_26_%24_13_&UCATEGORY_0=_26_%24_13_&UCATEGORY_S=0

ATV resolution and scaling

I'm a little confused about resolution and scaling. Currently I run my ATV through a projector which has a native resolution of 1280x720. As this exactly matches the ATV, I get a lovely picture.
I'm thinking of changing my projector for a plasma TV. Many plasma TVs are coming out in 1080i, which I think is more than I need as I will only be using it for ATV and as a 2nd monitor for my MBP. I'm also concerned about loss of image quality due to the upscaling from 720p. I'd rather get a TV that is 720p native, like my projector. However, this doesn't seem to be so simple. I've looked at a few TVs which claim to be 720p, yet all of them have a resolution of 1024x768. I understand there may be some around which are 1280x720, but all the ones within my budget seem to be 1024x768.
I would like to know how this different resolution is likely to affect my picture quality with ATV. I can see that 48 pixels can easily be lopped off to match 720, but what about the horizontal? Surely 1280 cannot be easily converted into 1024, at least not without a detrimental effect on picture quality?

the_beev wrote:
I'm a little confused about resolution and scaling. Currently I run my ATV through a projector which has a native resolution of 1280x720. As this exactly matches the ATV, I get a lovely picture.
I'm thinking of changing my projector for a plasma TV. Many plasma TVs are coming out in 1080i, which I think is more than I need as I will only be using it for ATV and as a 2nd monitor for my MBP. I'm also concerned about loss of image quality due to the upscaling from 720p. I'd rather get a TV that is 720p native, like my projector. However, this doesn't seem to be so simple. I've looked at a few TVs which claim to be 720p, yet all of them have a resolution of 1024x768. I understand there may be some around which are 1280x720, but all the ones within my budget seem to be 1024x768.
I have an older Panasonic with a 1024x576 panel it's HD ready and accepts up to 1080p signals. I have a newer full 1080p Panasonic full 1920x1080 panel.
Guess which I prefer?
The older one has picture quality that blows the other out of the water, but the main reason is I mainly watch SD stuff - I don't have an awful lot of commercial HD stuff though.
There's something about the old panel though that just looks smoother and more natural - probably a case of mature 1024x576 technology vs early 1080p technology, and poor upscaling of SD content.
I would like to know how this different resolution is likely to affect my picture quality with ATV. I can see that 48 pixels can easily be lopped off to match 720, but what about the horizontal? Surely 1280 cannot be easily converted into 1024, at least not without a detrimental effect on picture quality?
Don't worry about 'lopping off pixels', the 1024x576 panels are still 16:9 aspect ratio due to non-square pixel arrangements and scaling works very well with AppleTv 720p IMO.
So in some ways it may depend on what you're mainly watching, SD or HD - AppleTV should be fine with a 1024x576 panel. In general for plasmas/LCDs SD upscales quite poorly unless the sets have very good upscalers, so if you watch a lot of SD, a full HD set may give a worse subjective experience.
AC
Message was edited by: Alley_Cat

Reconnecting to Custom Motion Templates between Two Editing Systems

I'm having an issue with "media offline" in my FCP timeline whenever customized Motion templates are used in projects that are often edited between two different systems.
I always start with a standard "motion" project file and save it in my current project folder as a "Master" for creating identical templates on both systems. Yet even though both systems have the same custom template directory and the same template names, the FCP timeline always reports "Media Offline" whenever I try to work remotely on a project.
I'm wondering if it might somehow be possible to correct this issue so that my lower third overlay templates can exist on two different systems?
Thanks!

Sorry, I kind of thought my choice of words might be misunderstood. What I meant was that I always keep the original motion file that I initially created the template from in my current project folder. I am then able to open that original motion project file on the remote system and "save as template", so that (theoretically) I would end up with two identical templates (one on each system) located in the "user>library>application support>final cut studio>motion>template" directory.
I think I must have a tiny little error (or type-o) in the naming of either my template of the custom template folder. I'll have to go in and double check now that I have the correct path. (I was having a really hard time locating the "actual files" of my custom templates.
Thanks very much for your help!

Intra-company stock transfer between two ERP Systems without SAP APO

Hi,
I'm looking for information regarding the scenario Intra-company stock transfer between two ERP Systems without SAP APO.
On help.sap.com, I can only find below image, but I'm actually looking for the configuration settings required to implement it.
Does anyone have experience with this scenario?
Thanks & regards,
Oliver

Hi Jagdeep,
Thanks for the reply. I understand that I need to use iDocs and setup communication between both systems. What I am actually looking for is detailed information on the setup of the purchase order type and sales order type. Especially because there is no invoicing involved in this flow.
Regards,
Oliver

SMTP Namespace Sharing between two mail system

I have used two mail server (Exchange 2013 and Linux sendmail) for mailing in the same domain like abc.com.
I have converted authoritative domain in to internal relay for sending mail in Linux mail user, and create a send connector point to Linux mail system as a smart host. in that case my exchange user send mail to Linux user and internet via Linux smart host,
then I create a receive connector in exchange server for receiving mail from Linux mail system as edge transport custom connector & permission set to anonymous, when Linux user send mail to my exchange user it queued in my exchange message queue and
the error is:
Last Error:A local loop was detected.
What's the problem?

Hi rana78,
As Nathan mentioned, please create Contacts.
Detailed information:
So to avoid NDRs when using shared SMTP namespace you will need to either disable recipient filtering, configure the product to do LDAP queries against all directories that share the namespace, or create Contacts.
More details to see:
How to Share an Email Domain Between Two Mail Systems
http://exchangeserverpro.com/how-to-share-an-email-domain-between-two-mail-systems/
Disclaimer:
Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make sure
that you completely understand the risk before retrieving any suggestions from the above link.
Thanks
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support

RFC connection between two SAP systems (with SAP router)

Hi!
I would like to set up a RFC-connection from SAP Solution Manager to other SAP system.
The network connection between the servers is VPN.
How can I set up this RFC-connection, if my connection between two SAP systems looks as follows,
(I use the following SAP routers)?
my server --> customer
my server --> internal SAP Router server xy (10.101....) --> SAP Router customer 2 (10.1....) --> SAP System customer (134....)
Back-way
SAP Systeme customer --> SAP Router customer (134.1....) --> internal SAP router (212.6....) --> my server
How can I set up this RFC-connection, if my connection between two SAP systems looks as follows,
(I use the following SAP routers)?
something like:
/H/10.101..../S/sapdp99/H/10.1.4..../S/sapdp99/H/134...
Thank you very much!
regards
Thom

Same answer as in the other forum where you cross posted....

Routing issue between two satellites sites and one central hub

Hi,
I have 3 Ad sites with one exchange 2010 hub,cas,mailbox server on each sites.
One of this site (site A) is central Hub and the two other sites ( B and C) are two satellites of site A.
The is no connectivity between site B and C, only connectivity between A and B, and A and C.
When I send a mail from Site B to Site C, Exchange try to deliver the mail directly to site C and don't pass to site A to deliver to site C, some mail stay in queue in site B, and the the queue is in retry.
I flag the site A as HUB.
Site toplogy is correct and the cost too.
Can someone help me??
Thanks

what are your AD costs between A, B and C?
In Exchange 2010, each message recipient is always associated with only one Active Directory site, and there is only one least cost routing
from the source Active Directory site to the destination Active Directory site
If the least-cost routing path to the primary site contains any hub sites, the message must be
routed through the hub sites

IDOC -IDOC BETWEEN TWO XI SYSTEM

Hi iam Doing a scenario,
where i need to post an idoc from one system to another that travells through 2 xi system..
The Scenario is like this:
ISU --> XI1 > XI2> isu2
while doing this i used XI adapter between the Xi system.
And i am getting an error as Loop in Message Control in the MONI.
Please Do the Need Full Its urgent....
DId Any One Tried For this Type Of Scenario.. Please LET Me Know..
ITS URGENT
Thanks
Praveen
Edited by: pravin kk on Feb 20, 2008 6:38 PM
Edited by: pravin kk on Feb 21, 2008 12:53 PM

Hi,
The communication via web service may have advantages, if you want communicate with non XI systems.
In your scenario, there is direct communication between XI engines, so you can go for XI adapter. The XI adapter which is normally used to configure the exchange of messages with in an Integration Server, canbe extended to exchange messages between the two Integration Servers in the scenario.
Please verify if if you have the common SLD for both XI systems. its preferable to go for seperate SLDs
Check out the similar threads, XI to XI scenarios:
Re: XI -> XI scenario
Re: XI to XI connectivity
connection XI to XI
Re: XI to XI connectivity
These links will definitely give you an idea about the current situation.
Thanks
Swarup

Client Copy between Two Different Systems

Hi!!
Could someone please explain or provide any documentation which explains how to perform client copy between two r/3 systems of same version(ecc 6.0)
Thanks and Regards,
Vishwa.

Hi,
Save the contents that need to be copied in a Transport request at source client.
Now at the target client system,
execute transaction 'SCC1' and give the TR number and execute it.
The changes from the source client system this way will get copied to destination client system.
Reward if useful!
Thanks,
KalpanaR

Mirror virtual machines between two nas systems

Hello everyone,
I have an esx3.5 server and the vm's are stored in a thecus n5200pro nas using iSCSI. the synchronization module installed in the nas doesn't support iSCSI so I'm trying to find a solution to my problem.
Basically what I need is to mirror the first nas on the second so if the first one fails, I can just change the backup nas ip address and get things working again.
The only solution I found so far (which I'm currently testing) is using win2k3. I installed the ms iscsi initiator and created a mirror between the volumes of the two nas systems. It's currently synchronizing so I don't know if this will work yet.
My question is if there is a better way to handle this job without having to buy additional software. if not, is my current setup going to work?
guido

Hi Pranay,
>>There is a storage server which is added on both the host under as ISCSI array option :-
Do you mean the two hosts are connecting same ISCSI target of the storage server ?
Based on my understanding , shared storage is used for cluster .
Could you please tell us where the VMs is stored ?
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

DB Copy (MSSQL) between two SAP systems with different level and Components

Hi,
we have a SAP system release mysap 2004 SR1 and for "the upgrade project to SAP ECC 6.0 " we installed a new mysap 2004 in a new hardware (sap03) where we have also solution manager running. The new installed Mysap 2004 SR1 is alos running fine in the new hardware.
Now we would like to do DB copy from the old system (sap02) to the the new system sap03 and then we will do the upgrade to SAP ECC 6.0.
After I compared the two systems I have following questions:
1) there are 4 Software Components which are not in the new system (sap03). This are:
PI
FIN_BLERP
BP_INSTRASS
Is this necesary for the DB copy or we do not need this to be able to do the DB copy?
2) The Software Components Level is not the same. Should we have the same level to do the DB Copy?
Thanks in advance
Best regards
HanseAtik

Hi Juan, hi Clas,
just to be clear and to not stuck on the the way:
The systems are as follow:
1) the source system:
                     - Windows Server 2003,
                     - MSSQL Server 2005 with 32 bit.
                     - Mysap 2004 SR1
2) Target system:
                   - Windows Server 2003
                   - MSSQL Server 2005, with 64 bit.
                   - Mysap 2004 SR1 (with less Support package level and no PI, FIN_Basis, BP_BLERP and BP_INTASS coponents)
I hope this will work. could you post the link the DB Copy guide we are talking about?
By this way we will be sure that we are talking about the same DB Copy. Otherwise any mistake in this step will cost more work and time.
Thanks in advance
Best regards
HanseAtik

Error after creating Element level join between two different dataset in11G

Hi Experts,
My report is having data from two different datsets, I created two datasets and joined them with Element Level join. I am getting below error.
"The following tags were not closed: DATA_DS. Error processing resource 'http://localhost:9704/xmlpserver/servlet/xdo'. "
But independent datasets are executing with out any errors.
Please let me know, If any one have inputs to resolve this.
Thanks in advance..

Hi,
Can you please explain the resolution in more details. I'm also having the same issue in BI Publisher report when trying to join two data sets with Element Level Link. I have checked that all my columns have alias names.
Thanks,
Piya.
Edited by: 947289 on Jul 18, 2012 5:56 AM

DNS timeout and Name Server timeout between two DC's

Hi All
My clients have a brand new domain built for them, with two domain controllers at separate sites, and one site is having some issues.
At one site (where DC2 is hosted), all users are having 5-10 minute log on delays - once in everything is running without issues. Site where DC1 is has zero issues - they run smoothly, get a nice quick login etc. All users are using redirected folders and
all have the same GPO's applying to them.
DC1 also has periodic issues communicating with DC2 - nslookup using DC2 gives "DNS request timed out. timeout was 2 seconds" on external AND internal queries, but then 5 minutes later will resolve perfectly. During the "DNS time out"
period, trying to resolve DC2 as a Name Server also gives the error "A timeout occurred during validation".
Not sure if these (slow logon and DNS/NameServer time out issues) issues are related but I am at a loss.
Reverse lookup zones are fully created and populated, entries aren't randomly deleting themselves. Replication between both DC's is working fine, no errors and SYSVOL/NETLOGON are sharing fine from both DC's. Occassionally restarting the DNS server services
on both servers will kick them back into talking - but only for around 30sec-1minute, after that they communicate periodically without problems and spend the rest of the time not resolving.
Any ideas floating around, as I am at a loss here. We haven't been able to join more than a few test users to DC2's site for fear of them all calling every day due to long log on periods.

Hi,
Are you pointing each DC/DNS to the other one as primary dns in tcp/ip properties? Can you post a dcdiag /a /f:dcdiag.log from the DC2?
Any warnings/errors in Application log on the client(s) facing issues after they get logged in ? Can you also confirm that users from site with DC2 are having DC at : set | find /I "LOGONSERVER" output?
Hope it helps.
Regards,
Calin
Hi Calin
The DC's were originally pointing at each other for the primary but others prior to posting here suggested that was not best practice anymore and said they should be the other way around - in any case, either direction doesn't resolve the issues.
The only application error the users are getting is :
The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
The winlogon notification subscriber <GPClient> took 84 second(s) to handle the notification event (Logon)
DCDIAG of DC2 :
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = CAB1-DC-V01
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: AUS\NDC1-DC-V01
Starting test: Connectivity
......................... NDC1-DC-V01 passed test Connectivity
Testing server: AUS\CAB1-DC-V01
Starting test: Connectivity
......................... CAB1-DC-V01 passed test Connectivity
Doing primary tests
Testing server: AUS\NDC1-DC-V01
Starting test: Advertising
......................... NDC1-DC-V01 passed test Advertising
Starting test: FrsEvent
......................... NDC1-DC-V01 passed test FrsEvent
Starting test: DFSREvent
......................... NDC1-DC-V01 passed test DFSREvent
Starting test: SysVolCheck
......................... NDC1-DC-V01 passed test SysVolCheck
Starting test: KccEvent
......................... NDC1-DC-V01 passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... NDC1-DC-V01 passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... NDC1-DC-V01 passed test MachineAccount
Starting test: NCSecDesc
......................... NDC1-DC-V01 passed test NCSecDesc
Starting test: NetLogons
......................... NDC1-DC-V01 passed test NetLogons
Starting test: ObjectsReplicated
......................... NDC1-DC-V01 passed test ObjectsReplicated
Starting test: Replications
......................... NDC1-DC-V01 passed test Replications
Starting test: RidManager
......................... NDC1-DC-V01 passed test RidManager
Starting test: Services
......................... NDC1-DC-V01 passed test Services
Starting test: SystemLog
A warning event occurred. EventID: 0x80000109
Time Generated: 12/17/2014 08:25:05
Event String:
A pointer device did not report a valid unit of angular measurement.
A warning event occurred. EventID: 0x80000101
Time Generated: 12/17/2014 08:25:05
Event String:
A pointer device reported a bad angular physical range.
A warning event occurred. EventID: 0x80000102
Time Generated: 12/17/2014 08:25:05
Event String:
A pointer device reported a bad angular logical range.
A warning event occurred. EventID: 0x80000109
Time Generated: 12/17/2014 08:25:06
Event String:
A pointer device did not report a valid unit of angular measurement.
A warning event occurred. EventID: 0x80000101
Time Generated: 12/17/2014 08:25:06
Event String:
A pointer device reported a bad angular physical range.
A warning event occurred. EventID: 0x80000102
Time Generated: 12/17/2014 08:25:06
Event String:
A pointer device reported a bad angular logical range.
A warning event occurred. EventID: 0x80000109
Time Generated: 12/17/2014 08:47:55
Event String:
A pointer device did not report a valid unit of angular measurement.
A warning event occurred. EventID: 0x80000101
Time Generated: 12/17/2014 08:47:55
Event String:
A pointer device reported a bad angular physical range.
A warning event occurred. EventID: 0x80000102
Time Generated: 12/17/2014 08:47:55
Event String:
A pointer device reported a bad angular logical range.
A warning event occurred. EventID: 0x80000109
Time Generated: 12/17/2014 08:47:55
Event String:
A pointer device did not report a valid unit of angular measurement.
A warning event occurred. EventID: 0x80000101
Time Generated: 12/17/2014 08:47:55
Event String:
A pointer device reported a bad angular physical range.
A warning event occurred. EventID: 0x80000102
Time Generated: 12/17/2014 08:47:55
Event String:
A pointer device reported a bad angular logical range.
A warning event occurred. EventID: 0x80000109
Time Generated: 12/17/2014 08:47:55
Event String:
A pointer device did not report a valid unit of angular measurement.
A warning event occurred. EventID: 0x80000101
Time Generated: 12/17/2014 08:47:55
Event String:
A pointer device reported a bad angular physical range.
A warning event occurred. EventID: 0x80000102
Time Generated: 12/17/2014 08:47:55
Event String:
A pointer device reported a bad angular logical range.
......................... NDC1-DC-V01 failed test SystemLog
Starting test: VerifyReferences
......................... NDC1-DC-V01 passed test VerifyReferences
Testing server: AUS\CAB1-DC-V01
Starting test: Advertising
......................... CAB1-DC-V01 passed test Advertising
Starting test: FrsEvent
......................... CAB1-DC-V01 passed test FrsEvent
Starting test: DFSREvent
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
......................... CAB1-DC-V01 passed test DFSREvent
Starting test: SysVolCheck
......................... CAB1-DC-V01 passed test SysVolCheck
Starting test: KccEvent
......................... CAB1-DC-V01 passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... CAB1-DC-V01 passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... CAB1-DC-V01 passed test MachineAccount
Starting test: NCSecDesc
......................... CAB1-DC-V01 passed test NCSecDesc
Starting test: NetLogons
......................... CAB1-DC-V01 passed test NetLogons
Starting test: ObjectsReplicated
......................... CAB1-DC-V01 passed test ObjectsReplicated
Starting test: Replications
......................... CAB1-DC-V01 passed test Replications
Starting test: RidManager
......................... CAB1-DC-V01 passed test RidManager
Starting test: Services
......................... CAB1-DC-V01 passed test Services
Starting test: SystemLog
An error event occurred. EventID: 0x0000272C
Time Generated: 12/17/2014 08:30:22
Event String:
DCOM was unable to communicate with the computer 139.130.4.4 using any of the configured protocols; requested by PID 1810 (C:\Windows\system32\dcdiag.exe).
An error event occurred. EventID: 0x0000272C
Time Generated: 12/17/2014 08:30:43
Event String:
DCOM was unable to communicate with the computer 203.50.2.71 using any of the configured protocols; requested by PID 1810 (C:\Windows\system32\dcdiag.exe).
An error event occurred. EventID: 0x0000272C
Time Generated: 12/17/2014 08:31:05
Event String:
DCOM was unable to communicate with the computer 8.8.4.4 using any of the configured protocols; requested by PID 1810 (C:\Windows\system32\dcdiag.exe).
An error event occurred. EventID: 0x0000272C
Time Generated: 12/17/2014 08:31:27
Event String:
DCOM was unable to communicate with the computer 8.8.8.8 using any of the configured protocols; requested by PID 1810 (C:\Windows\system32\dcdiag.exe).
......................... CAB1-DC-V01 failed test SystemLog
Starting test: VerifyReferences
......................... CAB1-DC-V01 passed test VerifyReferences
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : aus
Starting test: CheckSDRefDom
......................... aus passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... aus passed test CrossRefValidation
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running enterprise tests on : swms.com
Starting test: LocatorCheck
......................... swms.com passed test LocatorCheck
Starting test: Intersite
Doing intersite inbound replication test on site AUS:
......................... swms.com passed test Intersite
SYSVOL is sharing OK, these errors are occurring when DC1 is performing backups and comes good a few seconds later)
The DNS failures are not on the NIC of each server they are the forwarders for the server, not sure why they are failing as DNS lookup is running fine and the IP's are resolving correctly within the forwarders.
set | find /I "LOGONSERVER"
C:\Users\Christopher.McCartne>set | find /I "LOGONSERVER"
LOGONSERVER=\\NDC1-DC-V01
NDC1 = DC1
CAB1 = DC2
The users are logging onto NDC1 currently as I did switch around their DNS servers to have DC1 as their primary to test if this resolved the logon times. It didn't so I've switched them back and will re-run the check to see which server is the logonserver.

RDP resolution and scaling level issues between two Win8.1 systems

Similar Messages

Maybe you are looking for