RDP Screen Refresh Slow

I was running Windows 2012 Essentials and recently rebuilt the system with R2.  Since doing so RDP screen refresh is extremely slow.  I published a video on YouTube to show using ImgBurn as instead of me moving something around the screen and you
wondering how fast I'm moving it you can see this program refresh speed.
http://youtu.be/yFABQlwIC0M
I've tried setting 1000/Full and Auto/Audo on the network card, setting display resolution lower or same on MS Remote Desktop client as is on the server, make sure the screen colors match between client and server.
Note this machine has videos (1080p) on it and I can map a drive and watch content from it on a remote computer without issue so seems like the "network" connection is working ok on my gigabit Ethernet.  Also computer sitting right next to
it is running Windows 7 and remoting into it works flawlessly.
Lastly, it always does this.  Rebooting doesn't help, logging in a second time doesn't help.  Attaching a monitor and keyboard and running stuff works smoothly.
Thoughts?
Thanks.
Steve

I don't have an answer but wondering if you have tried updating the video driver on that system?
Larry Struckmeyer[MVP] If your question is answered please mark the response as the answer so that others can benefit.
Does the video driver effect RDP? I thought it would originally however read in a few places that RDP uses a separate video subsystem to display on the remote computer.  Which makes sense because I've had computers with no graphic cards installed and
RDP works fine.
Steve
EDIT:  Updated to the latest NVidia Windows 8.1 drivers and same deal.  On the desktop everything is fine when I attached a monitor to the server but not remotely.

Similar Messages

  • Screen refresh for participants very slow on beehive web conference

    When I am sharing my desktop with participant on Beehive web conference, the screen refresh is very slow for the participants. It almost takes 1 minute for the screen to refresh on the participants screen. I am on Windows 7.
    Appreciate your help.
    Thanks in advance.

    Hi,
    Given we have very little control over the network bandwidth of the end user it is difficult to determine what the problem could be - normally the refresh is reasonably fast but if there are a lot of users or a restricted bandwidth it can show down a bit.
    One trick to aid the display is to not move the mouse around the screen - pointing to the entities on the page will increase the amount of information being sent. If you can click one and wait for the screen to be rendered at the other end before continuing it may be a bit quicker.
    Phil

  • Yosemite causing slow screen refresh using TOS

    Problem description:
    I use my iMac for trading with a java script app called ‘ThinkOrSwim’.  It was working fine with Mavericks then I upgraded to Yosemite.  Problems continue even when upgrading my RAM from 4GB to 16GB.  Overtime the Screen refreshes get really slow after using the ‘TOS’ Platform for 2-3 hours.  Have to do a SMC Reset to be able to use the ‘TOS’ platform once it becomes too unbearable to work with it.
    EtreCheck version: 2.1.6 (109)
    Report generated January 22, 2015 at 3:05:42 PM CST
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Support] links for help with non-Apple products.
    Click the [Details] links for more information about that line.
    Click the [Adware] links for help removing adware.
    Hardware Information: ℹ️
      iMac (27-inch, Mid 2010) (Technical Specifications)
      iMac - model: iMac11,3
      1 3.2 GHz Intel Core i3 CPU: 2-core
      16 GB RAM Upgradeable
      BANK 0/DIMM0
      4 GB DDR3 1333 MHz ok
      BANK 1/DIMM0
      4 GB DDR3 1333 MHz ok
      BANK 0/DIMM1
      4 GB DDR3 1333 MHz ok
      BANK 1/DIMM1
      4 GB DDR3 1333 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      ATI Radeon HD 5670 - VRAM: 512 MB
      iMac 2560 x 1440
    System Software: ℹ️
      OS X 10.10.1 (14B25) - Time since boot: 0:21:32
    Disk Information: ℹ️
      WDC WD1001FALS-40Y6A0 disk0 : (1 TB)
      EFI (disk0s1) <not mounted> : 210 MB
      Macintosh HD (disk0s2) / : 999.35 GB (888.30 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      OPTIARC DVD RW AD-5680H 
    USB Information: ℹ️
      Apple Internal Memory Card Reader
      Apple Inc. BRCM2046 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Computer, Inc. IR Receiver
      Apple Inc. Built-in iSight
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Launch Agents: ℹ️
      [loaded] com.google.keystone.agent.plist [Support]
      [failed] com.lexmark.bmspecificlaunchd.plist [Support] [Details]
      [loaded] com.lexmark.lexprint.plist [Support]
      [failed] com.lexmark.lxknetlaunchd.plist [Support] [Details]
      [invalid?] com.oracle.java.Java-Updater.plist [Support]
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist [Support]
      [loaded] com.google.keystone.daemon.plist [Support]
      [loaded] com.macpaw.CleanMyMac2.Agent.plist [Support]
      [invalid?] com.oracle.java.Helper-Tool.plist [Support]
      [loaded] com.oracle.java.JavaUpdateHelper.plist [Support]
    User Launch Agents: ℹ️
      [loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Support]
      [loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Support]
      [loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Support]
    User Login Items: ℹ️
      Preview Application  (/Applications/Preview.app)
    Internet Plug-ins: ℹ️
      FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
      Default Browser: Version: 600 - SDK 10.10
      Flash Player: Version: 16.0.0.235 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.287
      QuickTime Plugin: Version: 7.7.3
      o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
      OfficeLiveBrowserPlugin: Version: 12.3.6 [Support]
      Google Earth Web Plug-in: Version: 6.2 [Support]
      googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
      DirectorShockwave: Version: 11.6.1r629 [Support]
      iPhotoPhotocast: Version: 7.0
    User internet Plug-ins: ℹ️
      thinkorswim plugin_x86_64: Version: thinkorswim_x86_64 1.0.0.0 - SDK 10.7 [Support]
      tossc plugin_x86_64: Version: TOS Sharing Center plugin_x86_64 1.0.0.0 - SDK 10.7 [Support]
      WebEx64: Version: 1.0 - SDK 10.6 [Support]
    3rd Party Preference Panes: ℹ️
      Flash Player  [Support]
    Time Machine: ℹ️
      Time Machine not configured!
    Top Processes by CPU: ℹ️
          19% JavaApplicationStub
          6% WindowServer
          0% fontd
          0% launchd
          0% notifyd
    Top Processes by Memory: ℹ️
      1.05 GB JavaApplicationStub
      103 MB mds_stores
      86 MB Safari
      69 MB Dock
      52 MB spindump
    Virtual Memory Information: ℹ️
      13.27 GB Free RAM
      2.43 GB Active RAM
      532 MB Inactive RAM
      945 MB Wired RAM
      1.14 GB Page-ins
      0 B Page-outs
    Diagnostics Information: ℹ️
      Jan 22, 2015, 02:44:42 PM Self test - passed

    I just want to add that to further this improvement, I also disabled stat menus, and anything on the menu bar that caused the screen to refresh. I disabled transparency, the genie effect, and forced quit the window server on the activity monitor, and disabled the dashboard and the system preference "displays have separate spaces" - which required a re-login.
    I also left the auto-switching on the nergey preferences to the GPU to always use the 330m, rather than the intel hd card.
    Basically, I disabled anything that made any extra load on the GPU.

  • Is there a way to speed up Premiere's screen refresh when editing?

    Hello all!
    I've been doing a lot of editing in the time-line.  I'm editing two concurrent video tracks, and three concurrent audio tracks.
    Whenever I split or delete portions of a clip, Premiere re-draws the tracks which takes several seconds (maybe 7 seconds or so?).
    I know it doesn't seem to be a lot of time, but I am making many edits and it slows me down.
    I know that if one "turns-off" the fancy graphics that display little video pictures and audio waveform displays that this screen refresh goes faster.
    But is there some I should be setting to optimize my computer specific to screen refresh? 
    I believe I have mucho RAM, 500 gig of "extra" disk space, a fast dual core processor and am running Windows XP.
    My project is located on a secondary drive.
    Would a fancy video card help speed up the screen refresh?
    Thanks!
    --Tom Nickel

    Hunt,
    (By the way, thanks to everyone for all the time that they're putting into this thread.  I didn't think that it
    would have evolved into such complexity ..)
    My Windows Hardware Acceleration was set "all the way to the right".
    I tried it "all the way to the left" and then, just one "notch" less than "all the way to the right".
    (Hope that makes sense!)
    It didn't fix the problem :-( 
    (Do I need to re-start Windows when I change this setting?  I did not do that ..) 
    Here is some more information:
    I think I had first noticed the video latency last August.  I had attributed it to a lack of hard drive space and
    installed a new internal hard drive (I have four 500G sata hard drives in my computer.)
    Also, I had installed Premiere 7 on my computer about two weeks ago.  (I have been using "3" to date.)
    Both 3 and 7 act the same way, so I'm thinking that the issue probably isn't caused by a corrupt installation of Premiere.
    I would suspect having both 3 and 7 installed concurrently as the culprit, but the issue existed long before installing 7.
    If it were a system RAM failure, I'd suspect that I'd see a far more catastrophic failure?
    And, when the video is playing "catch-up", I'm not seeing excessive drive activity, so I'm not sure
    how big a role that the hard drove(s) are playing in this anomaly.
    re: hard drives - the only set-up that I changed in the BIOS when installing hard drives was to turn on the
    SATA interface for the drives .. maybe I've missed an optimization?
    Maybe I need to go thru the "optimize your PC" list ..
    Last thought for now:  Is my Nividia GeForce video card adequate?  I've got another video card that I can try.
    Thanks copiously again!

  • Screen refresh problem in kde4 with konsole, nvidia and compiz

    Hi,
    I have for the last month or so been experiencing really slow screen refreshes in konsole. What happens is that the text often doesn't get refreshed and you end up with the cursor not on the correct line, blocks all over the konsole window and blank areas of text. Minimising and maximising the konsole windows seems to refresh them as does using compiz's scale plugin. As I spend pretty much all day using konsole this has been really annoying. I have today however found a fix in this bug report:- https://bugs.launchpad.net/ubuntu/+sour … mments=all
    This was to go into ccsm, enable workaronds under utility and make sure "Force syncronization between X and GLX" is ticked.
    Thought I'd share is this has really been doing my head in, so hope this helps someone else!
    Ben

    Hi,
    I have for the last month or so been experiencing really slow screen refreshes in konsole. What happens is that the text often doesn't get refreshed and you end up with the cursor not on the correct line, blocks all over the konsole window and blank areas of text. Minimising and maximising the konsole windows seems to refresh them as does using compiz's scale plugin. As I spend pretty much all day using konsole this has been really annoying. I have today however found a fix in this bug report:- https://bugs.launchpad.net/ubuntu/+sour … mments=all
    This was to go into ccsm, enable workaronds under utility and make sure "Force syncronization between X and GLX" is ticked.
    Thought I'd share is this has really been doing my head in, so hope this helps someone else!
    Ben

  • NMac Pro 6core D500 problems with screen refresh: 10.9.3 warning!

    Avoid 10.9.3 on the Mac Pro 6 core, D500.
    Problem with screen refresh using Motion soon after updating OSX from Mac Pro late 2013 version of 10.9.2.
    I tried my Asus HDMI at all resolutions but to no avial. The screen juddered like it was Windows 95 without any GPU drivers.
    Apple's Tech Support had me use many key commands and finally we found out there was no issue with my hardware. Apple suggested a clean install before sending it back for repair. I was fortunate to have had made a backup in the Time Machine of my computer soon after installing all my apps. After restoring my computer is running 10.9.2 version made for the Mac Pros Late 2013. There are no more problems with screen redraw after using Motion.
    So, it is clear I cannot upgrade my Mac Pro to 10.9.3 while the issue with Motion's render engine messing with my screen refresh continues. Returning to 10.9.2 has made me realize 10.9.3 is slower and not as stable.
    I would suggest not upgrading unless you have a 4k monitor.

    Avoid 10.9.3 on the Mac Pro 6 core, D500.
    Problem with screen refresh using Motion soon after updating OSX from Mac Pro late 2013 version of 10.9.2.
    I tried my Asus HDMI at all resolutions but to no avial. The screen juddered like it was Windows 95 without any GPU drivers.
    Apple's Tech Support had me use many key commands and finally we found out there was no issue with my hardware. Apple suggested a clean install before sending it back for repair. I was fortunate to have had made a backup in the Time Machine of my computer soon after installing all my apps. After restoring my computer is running 10.9.2 version made for the Mac Pros Late 2013. There are no more problems with screen redraw after using Motion.
    So, it is clear I cannot upgrade my Mac Pro to 10.9.3 while the issue with Motion's render engine messing with my screen refresh continues. Returning to 10.9.2 has made me realize 10.9.3 is slower and not as stable.
    I would suggest not upgrading unless you have a 4k monitor.

  • Screen sharing slow

    I'm using the "share screen" feature in the finder of Leopard on a Macbook Air to access a Mac mini running 10.4.11. Though it works quite well, the screen refresh is a bit slower than I would like.
    Does anyone have any ideas regarding what might improve this . . . such as more memory in the mini, a faster intel processor than offered in the Air (Air is 1.6 ghz; a macbook would be 2.4ghz), upgrade the wireless network to 802.11/n from 802.11/g, lower the screen resolution on the mini (currently 1680x1050) . . . all of the above . . . none of the above . . . any ideas?

    jollysFastVNC http://www.coolosxapps.net/2008/06/21/jollysfastvnc-free-vnc-client-for-os-x/

  • Black screen (or screen refresh) during the process of start up. T400, Vista home basic.

    My 2 weeks old T400 Vista home basic can start up successfully. But every time when I start or restart it, during the start process, after inputting the password, there are 4 times of black screen (or screen refresh). Is it normal? Thanks. 

    Hi Ashley,
    Folder share: http://www.ifelix.co.uk/tech/3022.html
    Screen Share: http://www.screenrecycler.com/home.html
    Printer share: http://applejac.typepad.com/applejacmacintosh_users/2007/03/mac_osxwindows.html might help (not sure...)
    Chat: Maybe this can help...: http://discussions.apple.com/thread.jspa?threadID=1753612&tstart=-1
    Take care
    Stefan

  • How to change screen refresh rate in windows 7sp1 and windows 8.1 iso image using dism

    sir when i install windows 7sp1 and windows 8.1 then after the completion of setup when first time windows boots up then task bar is not shown and display is not clear and when i check under monitor settings the screen refresh rate is 60 Hertz and when i
    set the screen refresh rate from 60 Hertz to 75 Hertz, then everything is OK, plz tell me why this happens?
    why windows 7 sp1 and windows 8.1 automatically sets the screen refresh rate to 60Hertz instead of 75Hertz.
    how can i set screen refresh rate 75 Hertz permanently in iso image using DISM ?

    That is not a function of DISM. Resolution and refresh rate capabilities can be determined by multiple causes. Drivers are one, another is that most modern displays will report their capabilities to Windows.
    You can specify display settings with an answer file however:
    <Display>
    <HorizontalResolution>640</HorizontalResolution>
    <VerticalResolution>480</VerticalResolution>
    <ColorDepth>16</ColorDepth>
    <RefreshRate>60</RefreshRate>
    </Display>
    http://technet.microsoft.com/en-us/library/ff716344.aspx

  • Selection screen refresh

    HI,
      my question here is related to selection screen refresh.
    in the program one parameter is defined like below.
    PARAMETERS :P_EINT LIKE YFR1FIT_SALE_REF-POST_CODE DEFAULT 'EINT' OBLIGATORY VALUE CHECK.
    In the table YFR1FIT_SALE_REF table the field POST_CODE the values were maintained at domain level. So, when i selected the F4 help on this field, all the domain values are appearing in the pop-up and also the validation of the data.
    Now i have changed that, instead of domain, i have given the check table for this field. Though i did this change at table level, it looks these changes are not reflecting in the program. The program still showing the values maintained at the domain level, but not from the check table.
    When i went to SE51 and given this program and 1000 as screen no, i noticed that the flow logic is not updated as per the latest changes. its still refering to the domain level values for validation..
    So, to overcome this problem, it looks i have to update the flow logic of the screen 1000, which is created by default.  Do you have any idea on how to correct this or refreshing the flow logic for the screen 1000.
    Thanks for your time.
    Regards,
    Srikanth

    As  per [Input Help Hierarchy in the ABAP Dictionary|http://help.sap.com/saphelp_nw04/helpdata/en/9f/dbaa5435c111d1829f0000e829fbfe/content.htm] Check Table should have overridden the Domain Values in search help.
    Please try to activate the screen 1000 (you can go through SE80) once again. Ihave faced such problem earlier.
    But even if the problem persists check if you need to insert TABLES statement.. just dicing a though if it works.
    You can paste the code also.

  • Screen refresh problem where data is entered and the screen doesn't refresh

    Many people in the company are experiencing the odd screen refresh problem where data is entered and the screen doesn't refresh to show the updated result in corresponding cell formulas.
    Microsoft have issued a hotfix to fix the issue for Excel 2003 as shown. Microsoft released a hotfix for this problem (<a href="advisory?ID=978908">KB978908</a>). Display memory tends to pick up data from hidden sheets and pastes it
    into the active screen. No impact on the file. This occurs when protecting and unprotecting worksheets in VBA. I also suspect that enabling and disabling screen refresh contributes to this problem. In any case there is a fix, albeit with the following disclaimer:
    As of yet I have not been able to find a fix for this for office 2010 and 2013, Any suggestions would be great.

    Hi,
    Based on your description, Excel does not show the text strings when you typing. It may be caused by the cell format, if we set the cell format as ";;;" in custom format, it will not display the text that you typed. 
    And the issue may be caused by the third-party input method, there are some compatibility issue between them.
    If the issue still exits, please try the following methods
    Verify/install the latest updates
    Repair your Office program
    Regards,
    George Zhao
    TechNet Community Support

  • Problem with InDesign CC redrawing the screen too slow while using Zoom tool

    Hello. I got a problem with InDesign CC redrawing the screen too slow while using Zoom tool. Sometimes it takes more than a secong to zoom in or out. However InDesign CS6, Photoshop CC, Illustrator CC works just fine. What could be the problem, videocard or something else? Below is my PC configuration: OS Windows 8 Pro (x64); processor Intel Core i7 2600k CPU 3,40GHz; video adapter NVIDIA GeForse GTS 450; monitor NEC PA271W (2560x1440).

    Yes it’s a bug. The trick is to select the tool and then left click the photo information strip and hold for a few seconds until you see the windows bar at the top of the screen (not responding)
    The lasso tool should then work normally.

  • Screen refresh problem with Windows 7

    Hello all,
    I've recently begun testing Oracle with Windows 7 on a new HP 2540p notebook computer. I've encountered a very strange issue so far. After logging into Oracle, and Windows switches to Windows Basic theme, I should be taken to the main Navigator screen. But instead, the screen is simply white. If I drag (or nudge) the title bar just a bit, the screen refreshes and I can see the menu items. Then if I click on something (or even use hotkeys - ALT+F to get the file menu, for example), I don't see anything happen. But if I move the window just a bit, the screen refreshes and I can see that it did actually take my input, it just didn't re-draw the screen. I'm wondering if this may be a graphics driver issue (I do have the latest driver for the Intel Graphics Media Accelerator HD adapter), or if someone could point me toward a resolution to this problem. Any help is much appreciated.

    Dear All,
    Same problem of REFRESH PROBLEM also faced by but only a single and specific Windows 7 client.
    if you have resolved the issue , so please share with us.
    Thanks
    Eidy

  • Satellite M55-s3315: Screen refresh rate is 60 Hertz?!

    I have bought Toshiba m55-s3315 analog m50-s.... with intel 910 built-in, shared dynamic 128 mb memory; screen - 14.0" WXGA widescreen display with Toshiba TruBrite . Only refresh rate i get is 60 Hertz. I have updated intel chip software and toshiba also ... I would like to know is it possible to get more than 60 Hertz. The only way is to get 85 Hertz is to add extarnal monitor. I there oportinity to get at least 75 Hertz screen refresh rate ??? It was possible with my old HP Pavilion ze 5000.
    May be someone could explain me??
    Thank in advance!!!

    Hi
    I have noticed that on some Toshiba notebooks the screen refresh rate is fixed on 60 Hz. I have two of them. On Tecra M1 is fixed and on Satellite 1900 not. I have tested it and there is no difference if the refresh rate is changed.
    The TFT technology is much better than on usual monitors where the display flickering is visible on lower refresh rate. On display you will not see any flickering. In my opinion there is no reason for panic.
    Enjoy the life!!!

  • Satellite U200 - questions about screen refresh rate

    Sattellite U200-148 WINXPHOMESP2
    Video adapter Mobile Intel (R) 945GM Express Chipset Family
    Volume of video of memory 128
    Problem Accelerated Graphics Port - it is inaccessible
    Frequency of hertz the screen 60
    Questions
    1) Accelerated Graphics Port - there is enabled if yes that that it is necessary to make that it became accessible.
    2) whether Frequency of hertz with 60 can be raised even up to 75.

    Hi
    I have noticed that on some Toshiba notebooks the screen refresh rate is fixed on 60 Hz.
    The display refresh rate is not important on the notebook screens.
    TFT matrix doesn't have such thing as refresh rate. It doesn't blink.
    TFT like all other LCD screens doesn't have refresh rate parameter, only reaction time.
    Your eyes are safe ;)
    Ps: As far as I know the AGP port is not available.

Maybe you are looking for