RDP Services do not accept connection after cluster failover

Hi guys,
i am having weird behaviour on my Windows Server 2012 R2.
server 1
- 10.100.1.201
server 2 - 10.100.1.203
VIP - 10.100.1.202
when i perform remote desktop session to server 1 and server 2 after both servers are being rebooted, they are working perfectly fine. during the remote desktop session, i perform a cluster node failover switching node to server 2. immediately i perform
the task, my server 1 connection will hang and not able to login anymore.
strangely, when i am connection from the same server zone and perform remote desktop, they work perfectly fine and will not disconnect me from neither of the server 1 and 2.
i am suspecting the network routing mess up during the cluster failover, but from the route print, there are identical and has no problem with it.
any one here has the same problem i experience?
zhiyuan

Hi,
sorry if i lose you ... here is the story
node 1 - 10.100.1.201
node 2 - 10.100.1.203
vip - 10.100.1.202
when both server restarted, i can remote to both servers, no problem.
1. RDP to both node 1 and 2 together on their physical IP. Connected successfully.
2. checked the Active node on node 1. Perform fail over from node 1 to 2, node 1 RDP session loss connection immediately. checked on node 2, cluster node active on node 2. no errors.
3. perform node 2 to node 1 fail over. Node 2 RDP session loss connection immediately, node 1 session came back. checked cluster node active on node 1. no errors.
4. in order to have both can continue to rdp, perform restart on node 2 (the node cannot reconnect), after reboot, rdp back to normal.
5. firewall team confirm connection has reach server, server not responding to rdp apparently.

Similar Messages

HT4623 IPhone does not accept slice after Iihaddat new 6.0.1 device type as the iphone 3gs

Official solution in the iPhone does not accept SIM after Iihaddat together knowing that iTunes updated, the new release bearing ČÓ Miqubl chip device Brightening official

I too have experienced the Logitech s715i error message stating something like, the accessory is not a supported device of the iPhone. The speakers will charge my phone but will not "connect" to play music. I have an iPhone 4S running version 6.1 (10B142).
I too have contacted Logitech for support and am awaiting a reply.
Can we get some help over here?

FMS 3.0 stops accepting connections after 1-3 days, restart required

Hi,
We have a custom application that is running on FMS. Server is dedicated just for fms, there is only one application running on the server, with more instances, average traffic is 3-15 simultaneous users. The problem is, server suddenly stops accepting connections (after 1-3 days from restart), from this point it is impossible to connect to any instance, and fms server must be restarted. When the server crashes, the admin console can see all open instances, can close instances, can restart fms. There is nothing logged, that would explain this sudden failure.
Second problem is, cores are connected and disconnected too often, causing client to reconnect (takes 2-5 seconds).
Do you have any idea what is causing these problems?
Hardware: 4 x quadcore Intel(R) Xeon(R) CPU E7440 @ 2.40GHz, 32 GB ram
OS: CentOS release 5.3 (Final), kernel: 2.6.18-128.4.1.el5
cpu and mem usage: 1-5% max
FMS:
version: Adobe Flash Media Server 3.0.1 r123
license: valid, unlimited
configuration: default, changed in Application.xml:
    <AutoCloseIdleClients enable="true">
- just communication throught objects, strings, int, shared objects
- no streaming used
- Mbits in/out: 50/350 (48 hours from restart)
- Msgs in/out/drop: 4.000.000/21.000.000/0 (48 hours from restart)
- no problems with connection, no lags
LOGS:
admin.log
#Fields: date    time    x-pid    x-status    x-ctx    x-comment
2009-10-07    00:03:30    4816    (i)2581242    Core (8684) disconnected : _defaultRoot_:_defaultVHost_:::_1.    -
2009-10-07    00:03:31    4816    (i)2581241    Connection to admin received.    -
2009-10-07    00:03:31    4816    (i)2581243    Connection from core 10772 received.    -
2009-10-07    00:03:31    4816    (i)2581244    Connection from core 10772 accepted.    -
... repeating (10 minutes - 1 hour period)
master.log
#Fields: date    time    x-pid    x-status    x-ctx    x-comment
2009-10-07    00:03:31    24962    (i)2581223    Core (8684) is no longer active.    -
2009-10-07    00:03:31    24962    (w)2581256    Core (8684) _defaultRoot_:_defaultVHost_:::_1 experienced 1 failure[s]!    -
2009-10-07    00:03:31    24962    (i)2581221    Core (10772) started, arguments : -adaptor "_defaultRoot_" -vhost "_defaultVHost_" -app -inst -tag "_1" -conf "./conf/Server.xml" -name "_defaultRoot_:_defaultVHost_:::_1".    -
... repeating (10 minutes - 1 hour period)
edge.log
#Fields: date    time    x-pid    x-status    x-ctx    x-comment
2009-10-07    00:03:08    24982    (w)2641213    Connection rejected by server. Reason : [ Server.Reject ] : (_defaultRoot_, _defaultVHost_) : Application (doodletoostats) is not defined.    -
2009-10-07    00:03:30    24982    (i)2581250    Edge disconnected from core (8684).    -
2009-10-07    00:03:31    24982    (i)2581252    Registering core (10772).    -
... repeating (1 - 3 hours period)
core.log
#Fields: date    time    x-pid    x-status    x-ctx    x-comment
2009-10-07    00:03:31    10772    (i)2581237    Starting admin app on core (10772).    -
2009-10-07    00:03:31    10772    (i)2581238    Core (10772) connecting to admin.    -
2009-10-07    00:03:31    10772    (i)2581231    Core (10772) connected to admin.    -
2009-10-07    00:03:31    10772    (i)2581234    Core (10772) connection to admin accepted.    -
2009-10-07    00:03:31    10772    (i)2581246    Core (10772) sending register cmd to edge.    -
2009-10-07    00:54:22    11329    (i)2581247    Core (11329) disconnected from edge.    -
2009-10-07    00:54:22    11329    (i)2581233    Core (11329) disconnecting from admin.    -
... repeating

We have seen similar issues and the best work around is to have your clients connect on alternate cores/servers. The way to accomplish this really depends on your type of application.

Vnc, ssh ports intermittently not accepting connections since upgrading to 10.10.1

Since upgrading I cannot remote access my mac book air 2014. Prior to the upgrade I did not have any issues. I have not changed any networking / firewall settings.
Sometimes it works, other times the vnc and ssh ports do not accept connections.
Running nmap on another host on the local LAN reports all ports as being filtered.
Other times, nmap shows 22, 5900, and the AFP port open, as expected.
I know there have been reports of wi-fi issues, and this machine is using wi-fi.
Is it possible that when the screen blanks after a period of the machine not being used, that the wi-fi connection is going into a power down mode?
I don't see the ports being filtered when I am using the machine, it's only after I've left the house and I try to remotely connect.

On looking at the secure.log on the iMac with OSX10.6.8, I see these entries at each attempt to scp into the iMac:
Dec 29 11:06:20 molika sshd[7248]: in pam_sm_authenticate(): Failed to determine Kerberos principal name.
Dec 29 11:06:26 molika sshd[7246]: Accepted keyboard-interactive/pam for prowat from 137.110.243.132 port 35571 ssh2
Dec 29 11:06:26 molika com.apple.SecurityServer[26]: Session 0x236a14 created
Dec 29 11:06:26 molika com.apple.SecurityServer[26]: Session 0x236a14 attributes 0x20
Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Session 0x236a14 dead
Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Killing auth hosts
Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Session 0x236a14 destroyed
I don't know what to make of this.
Peter R

VPN "Host" not accepting connection

I don't like to cross-post, but hopeful someone in this forum can have a look at: http://windowssecrets.com/forums/showthread.php/160395-VPN-quot-Host-quot-not-accepting-connection in the Windows Secrets Lounge. (Don't forget to click on the
images to enlarge for readability.)
I should probably point out that this is my FIRST attempt to set up a VPN, so I've been sort of "feeling" my way along.
Thanks,
Bill

Hi,
How did you setup the VPN connection? make sure the VPN server is configured to allow these incoming connections, and check the routing and remoting service is running, then you can set up to connect to the VPN server.
And other causes of the error 807 could be that the VPN server is currently overloaded or when you have a poor network connection, so I suggest you stop bandwidth-consuming applications to make sure that the network connection is fine.
Here is a good video, would like to share it with you to better understand VPN setup
http://www.youtube.com/watch?v=8ZeerKipr3g
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Yolanda Zhu
TechNet Community Support

Upgrade 4.41 to 4.5 not acception connections

hi,
i have tar my sgd 4.41 and transfert on a new server then install the rpm 4.5.
next i stop my old 4.41 and tarantella uninstall and tarantella start
next i get the login but hang on sun logo
why /opt/tarantella/bin/tarantella status said
Array members (1):
- www1 (primary): NOT ACCEPTING CONNECTIONS.
do i need to upgrade my license number ?

right license list retreive my license number.
i have clean the logs directory and restart tta.
now i get a missing file ?
2010/01/20 09:55:44.553 (pid 11420) server/login/error #1263977744553
Sun Secure Global Desktop Software (4.5) ERROR:
Failed to load ./com.sco.tta.server.login.NamedUserLicensingLoginFilter.properties.
Exception was: javax.naming.NameNotFoundException: com.sco.tta.server.login.NamedUserLicensingLoginFilter.properties [Root exception is java.io.FileNotFoundException: /opt/tarantella/var/serverconfig/global/beans/com.sco.tta.server.login.NamedUserLicensingLoginFilter.properties/com.sco.tta.server.login.NamedUserLicensingLoginFilter.properties]
this file exists in 4.41

Why do i keep getting this message when trying to view a movie: The shared library "iCloud Purchases" is not accepting connections at this time. Please try again later.

why do i keep getting this message when trying to view a movie: The shared library “iCloud Purchases” is not accepting connections at this time. Please try again later.

Same issue. What are they doing?
Macbook Pro Retina Yosemite 10.10.2

After upgrading iPad to iOS8, cannot sign in to iCloud. Password it not accepted even after resetting it. Sign-in box keeps popping up. Suggestions?

After upgrading iPad to iOS8, iPad cannot sign in to iCloud. Password is not accepted even after resetting it. Sign-in box keeps popping up. Suggestions?

This Apple Help page provides contact information for various countries for security problems with an Apple ID:
http://support.apple.com/en-us/HT5699

ADFS 2.0 service does not automatically start after reboot

Hello,
We have two ADFS 2.0 servers in a farm. Any time these servers reboot, the ADFS service does not automatically start, even though the service is set to auto start. If I manually start the service it starts within 10 seconds.
The error in the logs show:
A timeout was reached (30000 milliseconds) while waiting for the AD FS 2.0 Windows Service service to connect.
The AD FS 2.0 Windows Service service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
But after the reboot is completed, I can manually start the service with no problems. Again, this ONLY happens on restart. I've searched the forums and found potential solutions for people who have consistent issues with starting ADFS every time.
Any ideas?

UPDATE - I built a 3rd ADFS server and was unable to reproduce the problem, until...
I went in to the service properties of ADFS and saw that even though I specified a Log On As account during the ADFS wizard, it changed itself back to "Network Service". I re-entered our ADFS service account username and password, it was
accepted, and I rebooted. On the next reboot, the service did not start automatically (with the same errors as the other ADFS servers), but I was able to manually start it.
I then went to the original ADFS server having the problem, switched it to use "Network Service", rebooted, and the service started up properly on reboot. I then changed it back to the named domain service account, and the issue came right
back. There are no other errors in the System Log indicating a problem with anything else.
So my guess is that something is happening to prevent the service from starting with the named Domain account on server reboot. But what?

Iphone 5s calendar not accept entries after ios 7.1 update

after ios 7.1 update the iphone 5s calendar not accept entries but will accept entries from sync with outlook connection via my MS desktop outlook

So, sometimes you discover a "fix" totally by accident. I tried the following and it's worked for me 100% of the time so far. Any entries I make using this have appearded on my iPhone and on any device where I view my calendar. Hope this helps others:
Open your calendar and then view it in the "month view";
Tap the hybrid view icon which is at the top to the left of the search icon at the top right of the screen; you'l see a list of the days activities at the the bottom of the screen.
Now, tap the "+" icon at the top to the right of the search icon. This will allow you to type in the event, time, date, etc that you want to enter.
Click "done" at the top right when finished. Now, you should see the event that you just entered at the bottom of the screen under the days activities. That should "stick" even if you close the calendar, or whatever. When I checked, it also showed up as it should on other devices. You can edit events, delete them, etc--it's worked for me.
I'm not sure why this worked--or what it's the only way to be able to enter an event since the move to iOS 7.1--but it's working for me--so why ask why??

Wifi is not auto connect after resume from sleep

I keep my Mac Book Pro up-to-date with software updates.
I recently update to OS X 10.8.3 (12D78).
Since then when I open my laptop after closing it and put it to sleep the wifi connection does not re-connect automatically.
I have to click on the wifi sign near the clock and select the network to connect to.
How can I make it connect automatically like it used to?

Wifi problems seem to crop up a lot on here and unfortunately there doesn't seem to be a 'one fix' solution.
However, sometimes any one of the following can help although, unfortunately, not always - in no particular order:
Check wifi security - if it's WEP change it to WPA or WPA2 (preferably, as it's more secure)
Change the wifi channel on the router
Create a new Network Location: http://support.apple.com/kb/HT5289
Reboot the router
Also take a look at this link and the links within the article for other ideas. They mainly reference Lion, but still seem to be relevant to Mountain Lion:
http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/?utm_source=feed burner&utm_medium=feed&utm_campaign=Feed%3A+osxdaily+%28OS+X+Daily%29&utm_conte n t=FaceBook
...and this link:
http://osxdaily.com/2012/11/30/resolving-stubborn-wi-fi-connection-problems-in-m ac-os-x/

My CS5.5 MC serial not accepted even after installing with FB 4.6

Hello all,
My CS5.5 MC serial number is not accepted by FB 4.6 even after start it in trial mode as suggested here: http://kb2.adobe.com/cps/924/cpsid_92402.html
Can anyone help me?

Hi,
Is MC (CS 5.5) already installed on your computer? If so, does it have FB 4.5 also installed as part of it? If FB 4.5 is already installed (either as point product or as part of CS 5.5), you need to uninstall FB 4.5 before installing FB 4.6
After uninstalling FB 4.5, run FB 4.6 installer. Instead of enterning the CS 5.5 MC serial number during installation of FB 4.6, install FB 4.6 as a trial first.
Are you able to launch FB after installing as above?
Is MC serialized already on your machine? Then FB would pick up that serial number automatically and work like a premium version.
If not, it would show the serial number screen when you launch FB 4.6 and it would then accept MC 5.5 serial number.
Please follow the above steps in the same order and let us know if that works.
Thanks,
Deeptika

Wifi will not stay connected after Lion upgrade - help?

I upgraded to Lion last week on my iMac and now my computer will not stay connected to wifi... it is fine if I restart my computer, but then it looses its connection, settings when it goes in to screen saver mode - very frustrating, please help!

This has been well discussed on another thread here: https://discussions.apple.com/thread/3191630?start=2055&tstart=0
(There appear to be no moderators on these forums to make sure that new threads with the same topic don't get linked to a parent !?)
Anyway... The issues appear for many to be related to a specific Airport card type & firmware version.
I've had constant disconnect problems with my Mini since upgrading to Lion.
My Airport card specs are:
Card Type:                              AirPort Extreme (0x168C, 0x86)
Firmware Version:                    Atheros 5424: 2.1.14.9
Connecting to my Time Capsule distributing on:
        PHY Mode:          802.11a
The Atheros firmware version appears to be the issue depending on certain wifi network conditions.
After some playing about today I think I've managed to force my Mini to connect on a better frequency, without having to roll back the firmware to the Snow Leopard version or mess with the Mini Airport card settings (via Terminal) by changing some settings in my router (Time Capsule).
These are the changes I made:
Airport Utility > Wireless > Wireless Options
Set Radio Mode to 802.11 a/n - b/g instead of 802.11 a/n - b/g/n (Automatic)
Set 2.4 GHz Channel to 13 instead of Automatic
Set 5GHz Channel to 48 instead of Automatic
My Mini now connects on:
PHY Mode:          802.11g
Signal / Noise:          -64 dBm / -96 dBm
Transmit Rate:          54
instead of previously
PHY Mode:          802.11a
Signal / Noise: -73 dBm / -96 dBm
Transmit Rate: 36
This appears now to be stable (no drops in the last 4 hours). It's a low transmit rate still, but better than before.
The iMac is still connecting on
PHY Mode:          802.11n
Signal / Noise:          -69 dBm / -88 dBm
Transmit Rate:          216
and all is right with the world (hopefully for the long term)

VPN Server in Snow Leopard Server not accepting connections

I've got some issues with a new Snow Leopard Server, running on a Mac mini Server, and VPN.
I have a Linksys WRT310N performing router duties. I have enabled the VPN Passthrough in the router's configuration pages (IPSec, PPTP and L2TP all Enabled). In the Applications and Gaming section, I have enabled ports 1723 (TCP and UDP) and 1701 (TCP and UDP) to go through to the mini Server. In order to have the VPN Passthrough enabled, I have to have the SPI Firewall enabled on the router.
I have both PPTP and L2TP enabled on the Server. When I first tested it, everything worked.
Within 24 hours, it stopped working, and I can't work out why.
On the Server, I can see in the logs the following messages: (server name and IPs changed to protect the guilty)
---BEGIN vpnd.log---
2009-11-03 20:03:32 EST Incoming call... Address given to client = 192.168.0.213
Tue Nov 3 20:03:32 2009 : Directory Services Authentication plugin initialized
Tue Nov 3 20:03:32 2009 : Directory Services Authorization plugin initialized
Tue Nov 3 20:03:32 2009 : PPTP incoming call in progress from '123.456.789.123'...
Tue Nov 3 20:03:33 2009 : PPTP connection established.
Tue Nov 3 20:03:33 2009 : using link 0
Tue Nov 3 20:03:33 2009 : Using interface ppp0
Tue Nov 3 20:03:33 2009 : Connect: ppp0 <--> socket[34:17]
Tue Nov 3 20:03:33 2009 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x38278225> <pcomp> <accomp>]
Tue Nov 3 20:03:33 2009 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x4e96b584> <pcomp> <accomp>]
Tue Nov 3 20:03:33 2009 : lcp_reqci: returning CONFACK.
Tue Nov 3 20:03:33 2009 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x4e96b584> <pcomp> <accomp>]
Tue Nov 3 20:03:36 2009 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x38278225> <pcomp> <accomp>]
Tue Nov 3 20:03:36 2009 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x4e96b584> <pcomp> <accomp>]
Tue Nov 3 20:03:36 2009 : lcp_reqci: returning CONFACK.
Tue Nov 3 20:03:36 2009 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x4e96b584> <pcomp> <accomp>]
Tue Nov 3 20:03:39 2009 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x38278225> <pcomp> <accomp>]
Tue Nov 3 20:03:39 2009 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x4e96b584> <pcomp> <accomp>]
Tue Nov 3 20:03:39 2009 : lcp_reqci: returning CONFACK.
Tue Nov 3 20:03:39 2009 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x4e96b584> <pcomp> <accomp>]
Tue Nov 3 20:03:42 2009 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x38278225> <pcomp> <accomp>]
Tue Nov 3 20:03:42 2009 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x4e96b584> <pcomp> <accomp>]
Tue Nov 3 20:03:42 2009 : lcp_reqci: returning CONFACK.
Tue Nov 3 20:03:42 2009 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x4e96b584> <pcomp> <accomp>]
Tue Nov 3 20:03:45 2009 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x38278225> <pcomp> <accomp>]
Tue Nov 3 20:03:45 2009 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x4e96b584> <pcomp> <accomp>]
Tue Nov 3 20:03:45 2009 : lcp_reqci: returning CONFACK.
Tue Nov 3 20:03:45 2009 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x4e96b584> <pcomp> <accomp>]
Tue Nov 3 20:03:48 2009 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x38278225> <pcomp> <accomp>]
Tue Nov 3 20:03:48 2009 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x4e96b584> <pcomp> <accomp>]
Tue Nov 3 20:03:48 2009 : lcp_reqci: returning CONFACK.
Tue Nov 3 20:03:48 2009 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x4e96b584> <pcomp> <accomp>]
Tue Nov 3 20:03:51 2009 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x38278225> <pcomp> <accomp>]
Tue Nov 3 20:03:51 2009 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x4e96b584> <pcomp> <accomp>]
Tue Nov 3 20:03:51 2009 : lcp_reqci: returning CONFACK.
Tue Nov 3 20:03:51 2009 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x4e96b584> <pcomp> <accomp>]
Tue Nov 3 20:03:54 2009 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x38278225> <pcomp> <accomp>]
Tue Nov 3 20:03:54 2009 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x4e96b584> <pcomp> <accomp>]
Tue Nov 3 20:03:54 2009 : lcp_reqci: returning CONFACK.
Tue Nov 3 20:03:54 2009 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x4e96b584> <pcomp> <accomp>]
Tue Nov 3 20:03:57 2009 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x38278225> <pcomp> <accomp>]
Tue Nov 3 20:03:57 2009 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x4e96b584> <pcomp> <accomp>]
Tue Nov 3 20:03:57 2009 : lcp_reqci: returning CONFACK.
Tue Nov 3 20:03:57 2009 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x4e96b584> <pcomp> <accomp>]
Tue Nov 3 20:04:00 2009 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x38278225> <pcomp> <accomp>]
Tue Nov 3 20:04:00 2009 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x4e96b584> <pcomp> <accomp>]
Tue Nov 3 20:04:00 2009 : lcp_reqci: returning CONFACK.
Tue Nov 3 20:04:00 2009 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x4e96b584> <pcomp> <accomp>]
Tue Nov 3 20:04:03 2009 : LCP: timeout sending Config-Requests
Tue Nov 3 20:04:03 2009 : Connection terminated.
Tue Nov 3 20:04:03 2009 : PPTP disconnecting...
Tue Nov 3 20:04:03 2009 : PPTP disconnected
2009-11-03 20:04:03 EST --> Client with address = 192.168.0.213 has hungup
---END vpnd.log---
On the client I'm seeing this in the logs
--- BEGIN ---
3/11/09 8:03:32 PM pppd[12074] pppd 2.4.2 (Apple version 314.0.2) started by root, uid 502
3/11/09 8:03:32 PM pppd[12074] PPTP connecting to server 'server.example.com' (10.0.1.1)...
3/11/09 8:03:33 PM pppd[12074] PPTP connection established.
3/11/09 8:03:33 PM pppd[12074] Connect: ppp0 <--> socket[34:17]
3/11/09 8:04:03 PM pppd[12074] LCP: timeout sending Config-Requests
3/11/09 8:04:03 PM pppd[12074] Connection terminated.
3/11/09 8:04:03 PM pppd[12074] PPTP disconnecting...
3/11/09 8:04:03 PM pppd[12074] PPTP disconnected
3/11/09 8:04:03 PM pppd[12074] PPTP disconnected
3/11/09 8:04:03 PM pppd[12074] PPTP disconnected
--- END ---
Any ideas?

Well, this didn't last long. The VPN is already down. Cannot connect to it again.Very Frustrating.
I know the actual server is receiving the requests (Server Log):
Jan 7 10:26:33 SnowServer racoon[118]: Connecting.
Jan 7 10:26:33 SnowServer racoon[118]: IKE Packet: receive success. (Responder, Main-Mode message 1).
Jan 7 10:26:33 SnowServer racoon[118]: IKE Packet: transmit success. (Responder, Main-Mode message 2).
Jan 7 10:26:33 SnowServer racoon[118]: IKE Packet: receive success. (Responder, Main-Mode message 3).
Jan 7 10:26:33 SnowServer racoon[118]: IKE Packet: transmit success. (Responder, Main-Mode message 4).
Jan 7 10:26:36 SnowServer racoon[118]: IKE Packet: transmit success. (Phase1 Retransmit).
Jan 7 10:26:55: --- last message repeated 6 times ---
Jan 7 10:26:55 SnowServer servermgrd[67]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Jan 7 10:26:57 SnowServer racoon[118]: IKE Packet: transmit success. (Phase1 Retransmit).
Jan 7 10:27:03: --- last message repeated 1 time ---
Jan 7 10:27:03 SnowServer racoon[118]: IKEv1 Phase1: maximum retransmits. (Phase1 Maximum Retransmits).
Jan 7 10:27:03 SnowServer racoon[118]: Disconnecting. (Connection tried to negotiate for, 30.655020 seconds).
Jan 7 10:27:03 SnowServer racoon[118]: IKE Phase1 Failure-Rate Statistic. (Failure-Rate = 100.000).
Jan 7 10:27:57 SnowServer racoon[118]: Connecting.
Jan 7 10:27:57 SnowServer racoon[118]: IKE Packet: receive success. (Responder, Main-Mode message 1).
Jan 7 10:27:57 SnowServer racoon[118]: IKE Packet: transmit success. (Responder, Main-Mode message 2).
Jan 7 10:27:58 SnowServer racoon[118]: IKE Packet: receive success. (Responder, Main-Mode message 3).
Jan 7 10:27:58 SnowServer racoon[118]: IKE Packet: transmit success. (Responder, Main-Mode message 4).
Jan 7 10:28:01 SnowServer racoon[118]: IKE Packet: transmit success. (Phase1 Retransmit).
Jan 7 10:28:28: --- last message repeated 8 times ---
Jan 7 10:28:28 SnowServer racoon[118]: IKEv1 Phase1: maximum retransmits. (Phase1 Maximum Retransmits).
Jan 7 10:28:28 SnowServer racoon[118]: Disconnecting. (Connection tried to negotiate for, 30.993122 seconds).
Jan 7 10:28:28 SnowServer racoon[118]: IKE Phase1 Failure-Rate Statistic. (Failure-Rate = 100.000).
But the VPN Server never gets the connection request (VPN Log):
2010-01-07 10:12:13 EST Loading plugin /System/Library/Extensions/L2TP.ppp
2010-01-07 10:12:13 EST Listening for connections...
2010-01-07 10:12:13 EST Listening for connections...
I have a call with Apple Support this afternoon. Hopefully it will be fruitful. If I get anywhere, I will post it. If anyone has any bright ideas, they would be greatly appreciated.
Message was edited by: AeroJet

Can not accept license after installing Acrobat Reader 8 and removing 6

To whom it may concern,
after installing Acrobat Reader 8, removing Acrobat Reader 6, and starting Acrobat Reader 8 the license agreemnet window appeared as aspected. The problem is it displays everything as far as I can see correctly, but it is not working in any way. I have to close the windows by clicking on the white cross in the title bar. I then receive the message, that I did not accept the license and therefore Acrobat Reader will be closed. And that happens when I click ok.
Hopefully someone over here as a tip who I can proceed. Thanks in advance!
Best regards,
Jochen

Dear Claudio and Shari,
Liam's suggestions have been of value for me. The Acrobat Reader is up and running.
Thank's!
@Shari
I'm using Firefox as well. An the tip and tool form Liam helped.
Just give it a try. The Explorer is used by Windows for more than a simple browser.
Best regards,
Jochen

RDP Services do not accept connection after cluster failover

Similar Messages

Maybe you are looking for