RDS 2012 Connection Broker and Web Access in different domains

Hello!
I'm trying to add Web Access (WA) server to RDS 2012 Deployment. WA server and other servers in Deployment are in different domains (in different forests with 2-way forest trust).
WA server was added to Deployment
successfully without any warnings.
We have many applications published but in this new WA server there are no application icons in Rdweb page at all.
There is nothing interesting in logs on WA server as well as on Connection broker servers.
Is this design
acceptable? Which additional actions are needed to make application icons visible?

Hi,
Please refer below links and cross verify the Web Acess server settings.
http://blog.kristinlgriffin.com/2010/03/rd-web-access-is-emply.html
http://social.technet.microsoft.com/wiki/contents/articles/5974.the-case-of-invisible-remoteapp-programs-a-k-a-no-remoteapp-programs-listed-on-rd-web-access-site.aspx
Regards,
Manjunath Sullad

Similar Messages

What ports to open between Connection broker and Web access hosts

I have setup a 4 node 2008 R2 RDS farm (1 connection broker, 1 Web access, and 2 session hosts.) They were all built from the same image, but the web access and connection broker will not talk to each other. They are all on the same subnet, and ips are x.x.x.200-203 The Web access server can ping the Sesions hosts, the session hosts can ping each other, web access and the connection broker. But the Web access and Connection broker cant ping each other. I turned off the windows firewall and they can ping, and connect... So whats ports does it need open?
Thanks!
~M

Hello,
Do you need any further helps? Please let us know it. Thanks.
· Lionel Chen
TechNet Subscriber Support in forum
If you have any feedback on our support, please [email protected]
This posting is provided "AS IS" with no warranties, and confers no rights.

RDS 2012 Connection Broker and round robin DNS?

Hi,
I have a set-up with three session host servers and one of them is also a connection broker. Round robin DNS is configured for the three servers and the clients, who are all on our internal networks, can connect just fine to the farm name. My
questions is, is there any point in having round robin configured since the connections still need to go through the CB? Could i just have one DNS-record for the farm name pointing to the CB? My initial though was that round robin would add
redundancy, but does it realy? I've tried to find answers on this but none of the articles and posts i've found are realy clear to me.
Quite often the initial connection for clients is slow and my theory is that it's caused by the RR DNS records.

Hi,
Thank you for posting in Windows Server Forum.
I think we need to have DNS RR entries for our RDS environment because DNS RR will be used by RDP clients to connect to the RD Connection Broker servers. Once when we allowed the entries of all server to DNS RR, when there is alternate connection need to capture
for following server it will provided by DNS RR.
During the connection process, the end nodes (RDVH, RDSH, RDWA) will get configured with all the RD Connection Broker server names, and they will randomly choose one to connect to. The RDP clients will use the DNS Round Robin name configured to connect to the
RD Connection Broker servers randomly.
More information.
RD Connection Broker High Availability in Windows Server 2012
http://blogs.msdn.com/b/rds/archive/2012/06/27/rd-connection-broker-high-availability-in-windows-server-2012.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

RDS 2012 Connection Broker HA - DNS RR or NLB?

I'm setting up a new RDS 2012 farm and I need very high availability. I'm deciding on how to configure the connection broker HA. I have 2 server VMs that will be the gateway, rdweb, and conn brokers. The Microsoft article you have probably seen
RD Connection Broker High Availability in Windows Server 2012 recommends using DNS RR. And the standard
recommendation for the rd gateway is to use Windows NLB.
I'm a little perplexed as to why you would use DNS RR when you have a much more robust solution available with NLB. You are already setting up NLB for the gateway, so why would you use what I would say is an inferior choice with dns rr for the conn broker?
The main issue I see is that if one of the cluster servers is offline, dns rr will at least 50% of the time point clients to a broker that's not available. With NLB, it's aware of the server being down and will point all clients to the one that's online.
Am I missing something? Does anyone using NLB for conn broker have any input good or bad? Thanks much in advance...

You need to read that:
http://www.virtualizationadmin.com/articles-tutorials/vdi-articles/general/remote-desktop-server-farms-explained-part1.html
And when you said "at least 50% of the time" don't forget the client DNS cache.

Publish RD Gateway and Web Access with One-Time Password (OTP) / Two-factor Authentication WITHOUT ISA/TMG server

Hi everybody,
I've been struggeling with this problem for a few weeks now and can't find a way to solve it.
We have an RD farm (Server 2012) which consists of two Remote Desktop Servers with Connection Broker and Web Access.
I've recently published a new server, containing RD Gateway and Web Access in our perimeter network.
Now we've got restrictions that OTP/2FA must be used for the external deployment and we've decided to go for a solution from Gemalto.
The "program" is called IDConfim and the server is called SA Server (Strong Authentication).
Also it's important that NO ISA/TMG server is supposed to be used, the OTP/2FA is supposed to work seamless with the Web Access/Gateway.
After hours discuss we came to a point were their NPS agent setup would be the only way to accomplish our goals.
The setup is supposed to be like this:
LAN:
1 DC (2008 R2)
RD Farm (2012)
1 SA Server (2012)
DMZ:
RD Gateway/Web Access (2012)
Were Gateway and Web Access should forward the authentications with NPS to the NPS agent on the SA server.
When you print your AD account to authenticate you add the 6 digits of OTP which you recieve from you mobile app.
Initially this seems to work, the Gateway forwards the request to the remote NPS server, BUT only if you write the correct AD password
(without the OTP extension).
If you write the correct AD password the authentication is forwarded to out SA Servern and it's beeing rejeced because the password doesn't
contain the correct OTP extension.
The problem comes here.
When you write you AD password along with the OTP extension you get a Windows Security error in the eventlog (On thw Gateway server) like this:
An account failed to log on.
Subject:
Security ID: NULL SID
Account Name: -
Account Domain: -
Logon ID: 0x0
Logon Type: 3
Account For Which Logon Failed:
Security ID: NULL SID
Account Name: user
Account Domain: domain
Failure Information:
Failure Reason: Unknown username or password.
Status: 0xc000006d
Sub Status: 0x0
Process Information:
Caller Process ID: 0x0
Caller Process Name: -
Network Information:
Workstation Name: server
Source Network Address: 192.168.x.x
Source Port: 63003
Detailed Authentication Information:
Logon Process: NtLmSsp
Authentication Package: NTLM
Transited Services: -
Package Name (NTLM only): -
Key Length: 0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
What i can see it's a NTLM error, but hey?! aren't we supposed to forward all authentication handeling to the remote NPS server?
The problem is that no matter what i try the above problem stays there.
Is it not possible to just forward ALL authentication handeling to a remote server?
The only solution I've found to get it working someday in the future is this:
"Remote Desktop Pluggable Authentication and Authorization", which is supposed to be introduced in 2012 R2.
Also this link describes it:
http://archive.msdn.microsoft.com/Release/ProjectReleases.aspx?ProjectName=rdsdev&ReleaseId=3745
Please, bring me some answers before my head explodes! :)
PS, long question = maybe some errors, ask me if something is unclear.

Hi,
Based on our experience, if the NTLM error occurs, please check the password.
Regards,
Mike
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Relation between RD Connection broker and RD session host farm in 2012 R2

Good Day
I have configured standard RDS session based deployment recently on 2012 R2 servers
Everything is working as expected
The setup has TWO RD Session host, 1 Session Broker, one RD Web access and one RD Gateway
I have created 2 DNS records named Rdsfarm.domain.com for my RDS1 and RDS2 session host servers and if I connect to this
rdsfarm.domain.com with RDP from TS clients, i am able to connect to any one of TWO rds servers without any problem
However some part is not clear to me
I have not added rdsfarm.domain.com any where except my RD Gateway server RAP policy
Also I have added my RD Broker server in RAP allowed group above.
I don't see any config where this farm name is associated with my RD Broker server
I have tried to connect to RD broker server from client, but it didn't redirect me to RD session host servers
If I try to connect to my RDS servers with their FQDN , it gives me error that I must connect thru farm name
Can you please help me to understand relation between RD session host servers farm and RD broker server ?
Also I would like to know what exactly happens in background when user start RDP session by entering RDS farm name
Note that RDS farm name is generic DNS Host(A) record pointing to my both RD session host servers
I wanted to know is there any command or configuration I missed out as I don't see any config where Generic RD Session Host Farm name (DNS Host(A) record) is associated with my RD Broker server ?
Thanks
Best Regards
Mahesh

Hi,
If you are opening Remote Desktop Connection and manually connecting to the broker then it will not work properly because you have no way of specifying the target collection in the user interface. If manually using the RD Client to connect is a requirement
what you can do is set the default collection in the RD Connection Broker server's registry.
To specify the default collection, please create the registry setting below in the broker's registry:
HKLM\SYSTEM\CurrentControlSet\Control\Terminal Server\ClusterSettings
DefaultTsvUrl REG_SZ tsv://vmresource.1.<VDI pool ID>
To determine the correct value for DefaultTsvUrl please open RDWeb in a non-IE web browser and click on the icon for the collection you would like to be the default, then edit the downloaded rdp file with Notepad and copy the portion of the loadbalanceinfo
setting that is similar to the above.
An alternative would be to download the .rdp file from RD Web Access and double-click it to connect.
As I mentioned above it is generally intended to have users connect via RD Web Access or RemoteApp and Desktop Connections feed or Remote Resources (uses the feed) so that the client will obtain the proper .rdp file from the server.
To configure the FQDN that is published in the .rdp files you can use the cmdlet below:
Change published FQDN for Server 2012 or 2012 R2 RDS Deployment
http://gallery.technet.microsoft.com/Change-published-FQDN-for-2a029b80
Below is a sample configuration based on what you have written:
1. Published FQDN (using cmdlet above): rdsfarm.domain.com --> points to ip address of RDCB server. When launching a RemoteApp or Full Desktop connection from RD Web Access, the prompt window will show this FQDN next to Remote computer.
2. Gateway FQDN: gateway.domain.com --> externally points to public ip address of your RD Gateway server. TCP port 443 and UDP port 3391 need to be forwarded to the RDG's internal ip address. When launching a RemoteApp or Full Desktop
connection from RD Web Access, the prompt window will show this FQDN next to Gateway server. This FQDN is set in Server Manager -- RDS -- Overview -- Deployment Properties -- RD Gateway tab.
In RD Gateway Manager -- Properties of RD RAP -- Network Resources tab you should select Allow user to connect to any network resource or define a RD Gateway-managed group that has all of the FQDNs that the user will need to connect to.
3. RD Web Access FQDN: remote.domain.com --> internally points to the ip address of your RDWeb server, externally points to the public ip address of your RDWeb server. This is the name you give users if they want to use RD Web, for example,
https://remote.domain.com/rdweb
If you want users to manually connect using Remote Desktop Client as well as use RDWeb it will be a bit confusing to them since they will need to use one FQDN when manually using the client and a different FQDN when using RDWeb. You could fix this
by having them only use one method or run RDWeb directly on the RDCB server, that way users would only need to know a single FQDN for both RDWeb and manual connections.
4. You should have a wildcard certificate with subject of *.domain.com set for all RDS purposes in Deployment Properties.
Thanks.
-TP

RDS 2012- connect to session collection trough mstsc.exe on XP SP3

Hi!! i need to connect to a session collection based on rds 2012 directly trough mstsc.exe on xp sp3 clients... xp don't support remoteapp and desktop connection and my users can't use internet explorer to connect trough rd web Access..
Thanks!

Hi,
What you could do is upgrade Windows XP with the latest Remote Desktop Client available for Windows XP (http://support.microsoft.com/kb/969084)
Then extract the .RDP file you want from the RDS 2012 environment (or specify the properties manually in a .RDP) file.
Recently I wrote on article on the distribution of Remote Apps and desktops in Windows Server 2012, that might be useful:
http://virtualizationadmin.com/articles-tutorials/vdi-articles/general/distribution-of-remote-apps-and-desktops-in-windows-server-2012.html
Also, more info on the .RDP properties specifically needed for RDS 2012:
http://microsoftplatform.blogspot.nl/2012/04/rd-connection-broker-ha-and-rdp.html
Kind regards,
Freek Berson
The Microsoft Platform
Twitter
Linked-in
Wortell company website

Difference between BLOCK DATA and WEB ACCESS BLOCK?

Currently my account shows I have both BLOCK DATA and WEB ACCESS BLOCK in place. I did this a couple of years to prevent data charges. Works perfectly. Now I'm trying to upgrade one of my lines to a Kin Onem because of the WiFi option and when I add the phone to my shopping cart and go to the Select Features & Services Page I see a message at the bottom that says: Features We Needed To Remove (Because they're incompatible with your phones or plan) - Block Web Access.
It looks like I don't have a choice when ordering the phone, but what exactly will removing the Web Access block do? Maybe I have to turn it off anyway to use the WiFi anyway right? I just don't want to incur any data charges.
Someone please help. Thank you!

"Data block" actually blocks your phone's ability to connect to the 3g data network. What this means is your phone can't create an internet connection on a cellular network. Web Access block specifically blocks the browser/mobile web on your phone from making a connection. Unblocking mobile web will not cause your phone to be able to connect to the cellular data network (resulting in 1.99/mb charges), but will allow the browser on the kin to connect while you're using wifi.

EM Application Log and Web Access Log growing too large on Redwood Server

Hi,
We have a storage space issue on our Redwood SAP CPS Orcale servers and have found that the two log files above are the main culprits for this. These files are continually updated and I need to know what these are and if they can be purged or reduced down in size.
They have been in existence since the system has been installed and I have tried to access them but they are too large. I have also tried taking the cluster group offline to see if the file stops being updated but the file continues to be updated.
Please could anyone shed any light on this and what can be done to resolve it?
Thanks in advance for any help.
Jason

Hi David,
The file names are:
em-application.log and web access.log
The File path is:
D:\oracle\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_brsapprdbmp01.britvic.BSDDRINKS.NET_SAPCPSPR\log
Redwood/CPS version is 6.0.2.7
Thanks for your help.
Kind Regards,
Jason

Connect EPM and web portal BPC through SAP router string

Dear Expert,
Please tell me how to connect EMP and web BPC through SAP router string?
thanks so much
hungth

Hi hungth,
Can you explain more? Do you mean you need a sap support to log on to your BPC web and investigate your BPC issues? If so, you can open HTTP connect connection by following note 592085.
Best regards,
Charlie

Pros and Cons between BEx client and Web access

Dear all,
I am quite new to BI 7.0 and have some question about frontend tools.
I am looking for a comparison material describing pros and cons of BEx client application and Web access in BI 7.0.
There are many tools in BEx suite and I am a bit confused about what fuctionality each tool has or what to consider to choose the right tool.
Thanks a lot in advance and appreciate any input.
Regards,
Kazuya

Hello,
Shortly speaking there are 4 tools and you need at least 2 of them:
1. Query Designer: you need it always as this is a tool for defining queries
2. Web Application Designer: you need it if you want create web reports
3. Report Designer: only if you want create formatted reports in web
4. BEx Analyzer: if you want to run queries in Excel (Analyzer is an add-in)
Help on BEx:
[http://help.sap.com/saphelp_nw70/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm]
-> BI Suite: Business Explorer
Regards, Karol

Lync 2010 server and UM role on different domains in different forests

Hello
I have a Lync 2010 environment running on domain A, with exchange 2010 UM also running in Domain A. We are in the process of migrating users and mailboxes from domain A to domain B. Once we reach our enterprise voice users with exchange UM enabled
we will need to install the exchange UM role on the exchange server in Domain B.
There is a 2-way trust relationship between domain A and domain B.
All the users from are running Lync on a PC located in Domain B, using Lync credentials from Domain A.
Are there any issues running Lync 2010 and Exchange UM from different domains in different forests? Is it as simple as creating a new UM DialPlan and UM IP Gateway to the domain A Lync FQDN?
Thanks

Hi,
Each UM forest must be configured to trust the forest in which Lync Server is deployed, and the forest in which Lync Server 2013 is deployed must be configured to trust each UM forest. If Exchange UM is installed in multiple forests, the Exchange
Server integration steps must be performed for each UM forest or you’ll have to specify the Lync Server domain.
Here is a link about for UM of Lync server 2013 but similar for Lync server 2010:
http://technet.microsoft.com/en-us/library/jj966276(v=exchg.150).aspx
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Server 2012 R2 RDS- Only want the Session Host, Connection Broker and Licensing Server!

Hi all,
Wondering if anyone has experience with implementing Remote Desktop Services (RDS) on Windows Server 2012 R2.
I am doing an RDS design for a platform where we only need an RDS Session Host, Licensing Server and Connection Broker. We do not need web access as these servers will simply be jump boxes internally!
However, implementing this correctly in our test environment has proved to be tricky. The options are:
Use the Server Manager and do a traditional install via Roles and Features ( specifically add the Session Host, Licensing Server and Connection Broker). The installation process seems to go through ok in this scenario but when I head over to the Remote
Desktop Services section of the Server Manager I simply get the message 'An RDS Deployment does not exist in the server pool. To create a deployment head to Roles and Features'.
Use the specific ‘Remote Desktop Services installation’ option on the Server Manager and do a Session Based Desktop deployment and Quick Start. This installation process seems to go through correctly and the Remote Desktop Section seems to be working
correctly via the Server Manager. However this process is ‘hard locked’ i.e. it installs the session host, web access and connection broker. I can then remove the web access component later from Roles/ Features.
Is there a best practice (if any) for installation? i.e. Will there be any issues down the line if I remove RDS Web Access from my server while following method 2?
There is a complete lack of documentation from Microsoft here so not sure what to do! Just need a basic RDS session based deployment.

Hi,
As I know from server 2012\R2 the best deployment skill is to perform via “Remote Desktop Services” installation mode with Standard deployment and don’t let single role to install. Because when we install through RDS mode, there are specific extra tools and
services activated along with that deployment which you can’t find with single role installation. And that is for sure, when we install RDS role as of this, by default we will get install RDCB, RDSH and RDWA role installed.
Sorry don’t have any option to try to remove that role as that role basically needed for RemoteApp and Desktop purpose. But if you want then you can try it with help of “Remove-RDServer”Powershell command.
https://technet.microsoft.com/en-us/library/jj215506.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Confused by RDS Connection Broker and DNS

Hi,
I'm setting up the following in my lab to test before a production deployment:
RDSH01 - RD Session Host 1
RDSH02 - RD Session Host 2
RDSH03 - RD Session Host 3
RDSBG - RD Connection Broker
Everything seems to work great if I point my RDP client at one of the session hosts via a DNS round robin, it redirects me to whatever server has my disconnected sessions on and new sessions get put on servers with the least connections, great, however,
I have the following questions...
I've read on other threads that I should be pointing my RDP client at the Broker, not at a Round Robin DNS containing the Session hosts. That said, its working just connecting to the hosts and redirecting and load balancing accordingly. Is this
the right approach? (I've got RDS.domain.local pointing at RDSH01, RDSH02 and RDSH03)
I'm currently using a Self Signed Cert for RDS.domain.local which is great when initially connecting, however when I get redirected to another host it comes up with a warning for eg. RDSH02.domain.local as the Session Hosts have no certs on them.
From what I've read, you don't need to put certs on every Session Host as the connection goes via the broker but when I connect to the broker I get told I'm not authorised, I can only connect to the Session Hosts.
What am I missing here?
Many thanks,
Dave

Thanks, I'll do that when I get to the live environment. The client has 10 thin clients already at a remote location using a single RDSH directly, they're Windows 7 Embedded with the RDP update so I'll tweak them with the load balance details.
As for R2, unfortunately we put the order through too early for R2 and have no SA, I tried to blag an upgrade through our MS account manager but he couldn't help as the prices have gone up so we'd have to go back to distribution and re-order :(
The client is coming from a very old physical 2003 environment which hasn't been touched in years, the current 2012 RDS is 100x better than their full far desktop experience so we'll be fine. Its 80 users over 3 RDSH's with 32Gb RAM on each although
I may increase that as we have more in the pot. Basically 3 VMware hosts on the front of an Equallogic, each with 64Gb RAM.
I will need to have a look at HA RDCB but that just introduces a single point of failure on the SQL box, so would have to do that too, seems overkill, can I just remove the RDSH's from the collection and run without the broker if it dies and rebuild the
collection with a new broker?
How many SAN's will I need on my cert, I've got memories of having to make multiple requests the first time I did exchange years ago.
Think I'll write a step by step guide for this, I've looked at loads and most on the web don't cover the little details, just the main steps which are kinda obvious.

Impossible to connect to Remote Web Access (Win Server 2012 Standard R2 with Essential Experience)

Hi everyone,
I've got a little problem and maybe someone here could help me a little.
I've installed the essential experience role on my 2012 R2 standard server and I configured all the stuff to connect my server via remote web access. Unfotunatly, I the connection doesn't work and i've got an error message like "Impossible to connect
with RWA. Please contact the person in charge of the server".
I spend a long time looking about my problem on google but didn't find how to solve it.
Thanks for any help
Julien
+ Here is a part of my log file :
[11464] 141225.214952.6462: RemoteAccess: [Website] RequestedLogOnPage: Previously in this browser session it went to the DefaultWithoutDetection, so now serving the same page
[8248] 141225.215001.2419: RemoteAccess: [Website] RequestedLogOnPage: Previously in this browser session it went to the DefaultWithoutDetection, so now serving the same page
[8248] 141225.215001.2775: RemoteAccess: [Website] A logon attempt detected
[8248] 141225.215001.4185: RemoteAccess: [Identity] A new LogOn starts.
[8248] 141225.215001.5005: IDENTITY: Looking for Microsoft.WindowsServerSolutions.Users.IUserLogonProvider
[8248] 141225.215002.9182: RemoteAccess: [HSBSMembershipProvider] OnLogin took 1448 milliseconds
[8248] 141225.215002.9292: RemoteAccess: [Identity] DOMAIN\User logged on.
[8248] 141225.215003.0032: RemoteAccess: [Extensibility] Cannot load AddInfoProvider; Provider not specified in the config file.
[8248] 141225.215003.0032: RemoteAccess: [Extensibility] Try to load addins
[8248] 141225.215005.6781: RemoteAccess: [Extensibility] Loading built in Addins succeeds
[8248] 141225.215005.6781: RemoteAccess: [Extensibility] The folder for third party add-ins are missing or broken.
[8248] 141225.215005.6781: RemoteAccess: [Extensibility] Loading third party Addins succeeds
[8248] 141225.215005.9428: RemoteAccess: [Customization] Start loading customization settings (4401b62c-fcb6-49dd-869d-d54cb0e3fa3c): Culture fr-FR
[8248] 141225.215005.9468: RemoteAccess: [Customization] Folder of Customization Level Partner doesn't exist.
[8248] 141225.215005.9498: RemoteAccess: [Customization] Start loading customization settings (54511254-bb20-4e95-91d9-e7553716099b): Culture fr-FR
[8248] 141225.215005.9538: RemoteAccess: [Customization] Folder of Customization Level Partner doesn't exist.
[13152] 141225.215014.8345: RemoteAccess: [Website] RequestedLogOnPage: Previously in this browser session it went to the DefaultWithoutDetection, so now serving the same page
[8248] 141225.215015.7706: RemoteAccess: [Website] Try to clear sessoin state at ClearSessionHandler
[864] 141225.215118.9208: RemoteAccess: [Website] RequestedLogOnPage: This is a Desktop browser, UserAgent: RaMgmtSvc
[864] 141225.215118.9218: RemoteAccess: [Website] +++++ Session fdzxgm01ny0qzphn4garzpym is starting +++++
[864] 141225.215118.9218: CultureSetting: None of browser languages can be exactly matched to supported list.
[864] 141225.215118.9218: RemoteAccess: [Website] Session fdzxgm01ny0qzphn4garzpym finished initializing.
[864] 141225.215118.9218: CultureSetting: None of browser languages can be exactly matched to supported list.
[864] 141225.215118.9228: RemoteAccess: [Customization] Start loading customization settings (308a562a-fd70-4815-a154-4a3d6ac4b053): Culture fr-FR
[864] 141225.215118.9258: RemoteAccess: [Customization] Folder of Customization Level Partner doesn't exist.
[864] 141225.215118.9278: RemoteAccess: [Customization] Start loading customization settings (d4404e0f-1d72-4c10-8e42-7dddb1c429b6): Culture fr-FR
[864] 141225.215118.9298: RemoteAccess: [Customization] Folder of Customization Level Partner doesn't exist.
[864] 141225.215118.9328: CultureSetting: None of browser languages can be exactly matched to supported list.
[8248] 141225.215132.4461: RemoteAccess: [Website] Session l3swbcif1hdbhpsw4g22j5fr is about to end.
[8248] 141225.215132.4461: RemoteAccess: [Framework] SessionStateBase attaches to l3swbcif1hdbhpsw4g22j5fr in thread 81
[8248] 141225.215132.4571: RemoteAccess: [Framework] SessionStateBase detaches from System.Web.SessionState.HttpSessionState in thread 81
[8248] 141225.215132.4581: RemoteAccess: [TaskManagement] No Task Manager instance found in SessionEnd
[8248] 141225.215132.4581: RemoteAccess: [Extensibility] Cannot load AddInfoProvider; Provider not specified in the config file.
[8248] 141225.215132.4581: RemoteAccess: [Extensibility] Try to load addins
[8248] 141225.215132.4711: RemoteAccess: [Extensibility] Loading built in Addins succeeds
[8248] 141225.215132.4721: RemoteAccess: [Extensibility] The folder for third party add-ins are missing or broken.
[8248] 141225.215132.4721: RemoteAccess: [Extensibility] Loading third party Addins succeeds
[8248] 141225.215132.4721: RemoteAccess: [Framework] SessionStateBase attaches to l3swbcif1hdbhpsw4g22j5fr in thread 81
[8248] 141225.215132.4721: RemoteAccess: [Framework] SessionStateBase detaches from System.Web.SessionState.HttpSessionState in thread 81
[864] 141225.215618.9753: RemoteAccess: [Website] RequestedLogOnPage: This is a Desktop browser, UserAgent: RaMgmtSvc
[864] 141225.215618.9753: RemoteAccess: [Website] +++++ Session g0zk1xuahs2rabpfzliofwr3 is starting +++++
[864] 141225.215618.9753: CultureSetting: None of browser languages can be exactly matched to supported list.
[864] 141225.215618.9763: RemoteAccess: [Website] Session g0zk1xuahs2rabpfzliofwr3 finished initializing.
[864] 141225.215618.9763: CultureSetting: None of browser languages can be exactly matched to supported list.
[864] 141225.215618.9783: RemoteAccess: [Customization] Start loading customization settings (cef3ea82-5347-4ce6-b125-a6180787c50b): Culture fr-FR
[864] 141225.215619.0203: RemoteAccess: [Customization] Folder of Customization Level Partner doesn't exist.
[864] 141225.215619.0874: RemoteAccess: [Customization] Start loading customization settings (a4e28700-1ea1-4253-8bb6-fdb279a69d8c): Culture fr-FR
[864] 141225.215619.0904: RemoteAccess: [Customization] Folder of Customization Level Partner doesn't exist.
[864] 141225.215619.0934: CultureSetting: None of browser languages can be exactly matched to supported list.
[8248] 141225.215632.5660: RemoteAccess: [Website] Session v2z1axfm1qglfloipkpkmgsy is about to end.
[8248] 141225.215632.5660: RemoteAccess: [Framework] SessionStateBase attaches to v2z1axfm1qglfloipkpkmgsy in thread 81
[8248] 141225.215632.5660: RemoteAccess: [Framework] SessionStateBase detaches from System.Web.SessionState.HttpSessionState in thread 81
[8248] 141225.215632.5660: RemoteAccess: [TaskManagement] No Task Manager instance found in SessionEnd
[8248] 141225.215632.5670: RemoteAccess: [Extensibility] Cannot load AddInfoProvider; Provider not specified in the config file.
[8248] 141225.215632.5670: RemoteAccess: [Extensibility] Try to load addins
[8248] 141225.215632.7479: RemoteAccess: [Extensibility] Loading built in Addins succeeds
[8248] 141225.215632.7479: RemoteAccess: [Extensibility] The folder for third party add-ins are missing or broken.
[8248] 141225.215632.7479: RemoteAccess: [Extensibility] Loading third party Addins succeeds
[8248] 141225.215632.7489: RemoteAccess: [Framework] SessionStateBase attaches to v2z1axfm1qglfloipkpkmgsy in thread 81
[8248] 141225.215632.7489: RemoteAccess: [Framework] SessionStateBase detaches from System.Web.SessionState.HttpSessionState in thread 81
[13152] 141225.220118.8912: RemoteAccess: [Website] RequestedLogOnPage: This is a Desktop browser, UserAgent: RaMgmtSvc
[13152] 141225.220118.8912: RemoteAccess: [Website] +++++ Session 3v0qgg52o3sj52nw0mmseeva is starting +++++
[13152] 141225.220118.8922: CultureSetting: None of browser languages can be exactly matched to supported list.
[13152] 141225.220118.8922: RemoteAccess: [Website] Session 3v0qgg52o3sj52nw0mmseeva finished initializing.
[13152] 141225.220118.8922: CultureSetting: None of browser languages can be exactly matched to supported list.
[13152] 141225.220118.8932: RemoteAccess: [Customization] Start loading customization settings (f320d814-acfe-44dd-953b-4516b1010621): Culture fr-FR
[13152] 141225.220118.9162: RemoteAccess: [Customization] Folder of Customization Level Partner doesn't exist.
[13152] 141225.220118.9402: RemoteAccess: [Customization] Start loading customization settings (9f646469-b201-475c-9876-bdd6fa100c26): Culture fr-FR
[13152] 141225.220118.9432: RemoteAccess: [Customization] Folder of Customization Level Partner doesn't exist.
[13152] 141225.220118.9462: CultureSetting: None of browser languages can be exactly matched to supported list.
[12488] 141225.220132.6698: RemoteAccess: [Website] Session 1isri15oy2gyonwhqmcwnu2h is about to end.
[12488] 141225.220132.6698: RemoteAccess: [Framework] SessionStateBase attaches to 1isri15oy2gyonwhqmcwnu2h in thread 83
[12488] 141225.220132.6698: RemoteAccess: [Framework] SessionStateBase detaches from System.Web.SessionState.HttpSessionState in thread 83
[12488] 141225.220132.6698: RemoteAccess: [TaskManagement] No Task Manager instance found in SessionEnd
[12488] 141225.220132.6707: RemoteAccess: [Extensibility] Cannot load AddInfoProvider; Provider not specified in the config file.
[12488] 141225.220132.6707: RemoteAccess: [Extensibility] Try to load addins
[12488] 141225.220132.8510: RemoteAccess: [Extensibility] Loading built in Addins succeeds
[12488] 141225.220132.8519: RemoteAccess: [Extensibility] The folder for third party add-ins are missing or broken.
[12488] 141225.220132.8519: RemoteAccess: [Extensibility] Loading third party Addins succeeds
[12488] 141225.220132.8519: RemoteAccess: [Framework] SessionStateBase attaches to 1isri15oy2gyonwhqmcwnu2h in thread 83
[12488] 141225.220132.8519: RemoteAccess: [Framework] SessionStateBase detaches from System.Web.SessionState.HttpSessionState in thread 83
[11464] 141225.220618.8676: RemoteAccess: [Website] RequestedLogOnPage: This is a Desktop browser, UserAgent: RaMgmtSvc
[11464] 141225.220618.8676: RemoteAccess: [Website] +++++ Session u1yks4s2vu5nnwmgimxpdxsa is starting +++++
[11464] 141225.220618.8676: CultureSetting: None of browser languages can be exactly matched to supported list.
[11464] 141225.220618.8676: RemoteAccess: [Website] Session u1yks4s2vu5nnwmgimxpdxsa finished initializing.
[11464] 141225.220618.8676: CultureSetting: None of browser languages can be exactly matched to supported list.
[11464] 141225.220618.8676: RemoteAccess: [Customization] Start loading customization settings (11683447-399a-4db1-aec5-346ceac75046): Culture fr-FR
[11464] 141225.220618.8676: RemoteAccess: [Customization] Folder of Customization Level Partner doesn't exist.
[11464] 141225.220618.8676: RemoteAccess: [Customization] Start loading customization settings (4d1c7c3e-80ec-4526-af9e-e42639e7aefe): Culture fr-FR
[11464] 141225.220618.8676: RemoteAccess: [Customization] Folder of Customization Level Partner doesn't exist.
[11464] 141225.220618.8676: CultureSetting: None of browser languages can be exactly matched to supported list.
[12488] 141225.220632.8011: RemoteAccess: [Website] Session xq2ztj3nzkyuio4gpvrenzkv is about to end.
[12488] 141225.220632.8011: RemoteAccess: [Framework] SessionStateBase attaches to xq2ztj3nzkyuio4gpvrenzkv in thread 83
[12488] 141225.220632.8011: RemoteAccess: [Framework] SessionStateBase detaches from System.Web.SessionState.HttpSessionState in thread 83
[12488] 141225.220632.8011: RemoteAccess: [TaskManagement] No Task Manager instance found in SessionEnd
[12488] 141225.220632.8011: RemoteAccess: [Extensibility] Cannot load AddInfoProvider; Provider not specified in the config file.
[12488] 141225.220632.8011: RemoteAccess: [Extensibility] Try to load addins
[12488] 141225.220632.8011: RemoteAccess: [Extensibility] Loading built in Addins succeeds
[12488] 141225.220632.8011: RemoteAccess: [Extensibility] The folder for third party add-ins are missing or broken.
[12488] 141225.220632.8011: RemoteAccess: [Extensibility] Loading third party Addins succeeds
[12488] 141225.220632.8011: RemoteAccess: [Framework] SessionStateBase attaches to xq2ztj3nzkyuio4gpvrenzkv in thread 83
[12488] 141225.220632.8011: RemoteAccess: [Framework] SessionStateBase detaches from System.Web.SessionState.HttpSessionState in thread 83

Hi,
à
"Impossible to connect with RWA. Please contact the person in charge of the server"
Did you type RWA URL in IE (or any third-party Browser) and then get below error? Did you access the RWA website
internally? In addition, would you please let me know complete error message that you can get?
Would you please let me know what kind of domain name you use via
Set Up Your Domain Name wizard? When complete Set up Anywhere Access wizard, did you find any error message?
Please refer to following article to check if configure RWA correctly and troubleshoot RWA.
Manage Remote Web Access in Windows Server
Essentials
Please also use the following Configuration Troubleshooter tool that Robert created and check if can find some
issues. This tool will check IIS and Certificates.
Windows Server Essentials
- Configuration Troubleshooter
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

RDS 2012 Connection Broker and Web Access in different domains

Similar Messages

Maybe you are looking for