RDS 2012 - Connection issues when selecting "This is a private Computer"
We recently cutover our corporate RDS system the Windows 2012 version and it was pretty smooth, only few issue that where resolved quickly. In the last 3 weeks I nave had 4 differnet users working from home on personal WIndows 7 system that
they use to connect to their computer in the office using Windows 2012 RDS telling me that they can't connect any longer. Doing some basic troubleshooting I discovered that if they select the option on the RDS Webaccess page "This is a private computer'
they can't connect to their computer in the office. If they select "This is a public or shared computer" It works fine.
Anyone seen this before???
Joe Gomez
Hello,
Thanks for your response.
1. Windows Server 2012
2. it appears that it is connecting then it times out after about 30-40 second.
3. "Remote Desktop can't connect to the remote computer for one of the these resons:"
Remote access to the server is not enabled.
The remote computer is turned off.
The remote computer is not avalible on the network.
Make sure the remote computer is turned on and is connected to the network and that remote access is enabled.
4. I will try the a non customized RDWEB page.
5. Our users have a range of RDP clinet version, I will make sure that these having the problem are on 6.3.9600
6. Yes they use the Connect to Remote PC feature to connect to a physical PC in the office.
This worked fine in the Windows 2008R2 RDS environment. The new RDS 2012 we started to see this.
Thanks
Joe
Joe Gomez
Similar Messages
-
I installed OS X Lion v10.7.3 because of the following claim.
The OS X Lion v10.7.3 Update includes Safari 5.1.3 and fixes that:
Resolve a Wi-Fi connection issue when waking from sleep
It continues to be a real pain having to reconnect to the network each time I wake my MacBook Air from sleep.
Does anyone have a suggestion for the resolution to this problem?It seems the update fixed old problems for some and caused new problems for others. Sorry to hear you're in the latter group.
Here are some things to try.
1. Go to System Preferences > Network, and click the gear icon under the network interfaces like so:
Whatever service order you have set, drag Wi-Fi either to the top (assuming it's not already there) or someplace else in the list. Click OK and then Apply. Sleep the system then wake it again to observe any changes.
2. Click Wi-Fi in the above then click Advanced. Select all the networks your computer has ever joined and delete them with the "-" button. OK then Apply again. Select your network under the AirPort icon to re-join it. Sleep and wake again to see if that did anything.
3. Try creating a new, temporary user account. Log in under that account to see if its behavior is any different.
You may have done all of these already but perhaps there is something you have not thought of. If nothing helps we may just have to wait a bit longer for Apple to release a fix. -
Recurring "connection failed" when selecting TimeCapsule in the sidebar (internet connection works fine). Clicking "Connect As" starts the cyle over again but ends in "There was a problem connection to the server" message. Only fix is resetting TC.
The TC is the wifi base station, also have AirportExpress on the network, both of which work fine. The TC has an external disc connected as well, which is also visible in the sidebar but also cannot be connected to. Several MB computers use the network, all of which either can or cannot connect to the TC disc depending on when it is acting up.
Any ideas other than clicking "connect as" or powering down the network every time?Read up how to install 5.6 utility into ML.. it is pretty easy.
I downloaded 5.6
http://support.apple.com/kb/DL1482
Download unpkg
http://www.timdoug.com/unpkg/
Open the dmg to get the pkg.. drag it onto unpkg.. and it will create a directory under desktop with all the files.. drag the application to the utility directory.. or just run it direct.
Google if you want more explicit instructions.
Much easier with a real tool instead of a toy.
Hold the option key when you select firmware update.. all the old ones will appear.
But this will not work on newer Gen4.. only on every other model and early Gen4. .I do not know when they turned the corner and started this only 7.6 nonsense. -
Resolve a Wi-Fi connection issue when waking from sleep
Hi,
In the recent release for Mac OS X Lion 10.7.3 "Resolving a Wi-Fi connection issue when waking from sleep" was supposed to be resolved, not so at my end. Has anyone else encountered the same issue and if so will there be a resolve.
Thank youHello BGreg and thank you for your answer,
I have alreadty read about this solution, and tried it.
I downloaded the 1.2 Go file, and applied it. And repaired permissions.
Everything went fine.
Unfortunately, it didn't solve the problem.
Meaning that when iMac wakes up, it doen't join my WiFi network.
I have to do it manually.
I don't know what to do : it is very strange because I never had that problem with OS 10.7.2 !
And my network setup has never changed.
another info :
I noticed that in the network setup screen, when I want to close the little lock to restrain further modifications, it won't close. Weird !
Do you think I should call Apple Assistance ? -
Why won't my ipod touch sync? It is all up to date and everything, and i know it is connected because when i plug it into my computer it charges, but it doesn't even show that it is connected so i can't sync all my new songs:(
http://support.apple.com/kb/TS1538
http://support.apple.com/kb/TS1591 -
Disable option "This is a private computer" of webacc
Hi all,
anyone knows how to disable option in webaccess, i want to disable "This is a private computer", just use "this is a public or shared computer" .
"This is a public or shared computer" or "This is a private computer"
is webaccess supported to disable? or can we disable in code of web page?
Regards,1. Go to: "/opt/novell/groupwise/webaccess/gw/WEB-INF/classes/templates/webacc/css"
2. Backup login.htt
3. Open login.htt with some text editor.
4. Find this lines:
Code:
<table id="idTimeOutOption">
<tr>
<td><input type="radio" tabindex="3" class="checkbox" id="idInternalTimeoutPublic" name="Security.Private.timeout" value="false" onchange="gwwa.mlogin.saveTimeoutCookie(this);"></td>
<td style="font-size: 13px; line-height: 20px;">{STRING Login.public}</td>
</tr>
<tr>
<td><input type="radio" tabindex="4" class="checkbox" id="idInternalTimeoutPrivate" name="Security.Private.timeout" value="true" onchange="gwwa.mlogin.saveTimeoutCookie(this);"></td>
<td style="font-size: 13px; line-height: 20px;">{STRING Login.private}</td>
</tr>
</table>
5. Comment/delete them out.
6. Restart tomcat and apache. -
RDS 2012 Connection Broker HA - DNS RR or NLB?
I'm setting up a new RDS 2012 farm and I need very high availability. I'm deciding on how to configure the connection broker HA. I have 2 server VMs that will be the gateway, rdweb, and conn brokers. The Microsoft article you have probably seen
RD Connection Broker High Availability in Windows Server 2012 recommends using DNS RR. And the standard
recommendation for the rd gateway is to use Windows NLB.
I'm a little perplexed as to why you would use DNS RR when you have a much more robust solution available with NLB. You are already setting up NLB for the gateway, so why would you use what I would say is an inferior choice with dns rr for the conn broker?
The main issue I see is that if one of the cluster servers is offline, dns rr will at least 50% of the time point clients to a broker that's not available. With NLB, it's aware of the server being down and will point all clients to the one that's online.
Am I missing something? Does anyone using NLB for conn broker have any input good or bad? Thanks much in advance...You need to read that:
http://www.virtualizationadmin.com/articles-tutorials/vdi-articles/general/remote-desktop-server-farms-explained-part1.html
And when you said "at least 50% of the time" don't forget the client DNS cache. -
RDS 2012 Connection Broker and Web Access in different domains
Hello!
I'm trying to add Web Access (WA) server to RDS 2012 Deployment. WA server and other servers in Deployment are in different domains (in different forests with 2-way forest trust).
WA server was added to Deployment
successfully without any warnings.
We have many applications published but in this new WA server there are no application icons in Rdweb page at all.
There is nothing interesting in logs on WA server as well as on Connection broker servers.
Is this design
acceptable? Which additional actions are needed to make application icons visible?Hi,
Please refer below links and cross verify the Web Acess server settings.
http://blog.kristinlgriffin.com/2010/03/rd-web-access-is-emply.html
http://social.technet.microsoft.com/wiki/contents/articles/5974.the-case-of-invisible-remoteapp-programs-a-k-a-no-remoteapp-programs-listed-on-rd-web-access-site.aspx
Regards,
Manjunath Sullad -
Possible Resolution to MiFi 2200 connection issues when using WiFi
I was having issues connecting to the Internet with my Windows 7 laptop using the MiFi 2200 as a WiFi device.
My WiFi adfapter was retaining the last IP Address it had obtained ... in my case my home network.
Go to a command prompt and do an ipconfig -release followed by ipconfig-renew.
It pulls an address from the MiFi from the DHCP range and works perfectly.
Hope this works for everyone!Maybe also check specific for the 2 different tcpip protoclas loaded.. here is the solution that resolved my connection issue:
Updated Vista Home sp1 to sp2 ( 450+MB download )
Updated Atheros AR5007 drivers to 7.6 , 2008 release... there might be a newer release but I dont want to jack with it now that I'm working.
Check in network connections for wireless connection.
I had 2 TCPIP protocols loaded. v6 and v4 .. v4 had IP and DNS hard set. changed both over to auto assign
WALLA Mifi is now working wirelessly. -
Xcelsius XML Connection Issue when using a Crystal created XML file
HI Xcelsius/Crystal Gurus,
I am running Crystal Reports 2008 version 12.2.9.698 and Xcelsius 2008 5.3.0.0 Build 12,3,0,670,
I am attempting to create an XML file from a Crystal report which will be consumed by an Xcelsius Dashboard. Apparently, there is something with the file that Xcelsius does not like.
I have formatted the report exactly as Xcelsius requires and exporting via text with an xml extension to create an .xml file. When I add an XML Connection in Xcelsius and add the appropriate names/range, etc...I am able to see the file via the Preview XML button on the Connection, but when I use a component, I am not seeing the data in the component.
I can 'recreate' the file in NotePad by manually typing in the entries to look exactly like the file created by Crystal and set up a connection in Xcelsius to consume that file and it works beautifully.
Does anyone have any experience with using Crystal Reports to create an XML file (not using the XML Export, but by exporting as a Text and adding an extension)?
Is it possible that Crystal is adding hidden characters or something? I can pull this Crystal created file into an XML editor or MS Word and it is validated as a good XML File.
Any help is greatly appreciated!This article is all about setting up security on the web service. But, I just want to connect to the web service as a client using the proxy and the web service doesn't have any security set on it at this time.
I am getting a connection timeout, even when I set the syncMaxWaitTime in the domain.xml file on the app server to a higher number (although this doesn't seem to affect the time it takes for the debugger to return). -
RDS 2012- connect to session collection trough mstsc.exe on XP SP3
Hi!! i need to connect to a session collection based on rds 2012 directly trough mstsc.exe on xp sp3 clients... xp don't support remoteapp and desktop connection and my users can't use internet explorer to connect trough rd web Access..
Thanks!Hi,
What you could do is upgrade Windows XP with the latest Remote Desktop Client available for Windows XP (http://support.microsoft.com/kb/969084)
Then extract the .RDP file you want from the RDS 2012 environment (or specify the properties manually in a .RDP) file.
Recently I wrote on article on the distribution of Remote Apps and desktops in Windows Server 2012, that might be useful:
http://virtualizationadmin.com/articles-tutorials/vdi-articles/general/distribution-of-remote-apps-and-desktops-in-windows-server-2012.html
Also, more info on the .RDP properties specifically needed for RDS 2012:
http://microsoftplatform.blogspot.nl/2012/04/rd-connection-broker-ha-and-rdp.html
Kind regards,
Freek Berson
The Microsoft Platform
Twitter
Linked-in
Wortell company website -
Greetings all,
I am needing assistance in how to lockdown access to Local Computer Management and Windows Backup via Group Policy for users that access RDS service. I have followed this awesome guide - h t t p://w w w.it.ltsoy.com/windows/lock-down-remote-desktop-services-server-2012/
- but it is missing two important resources that I would like to lock down.Currently, I have successfully locked down Control Panel for users via Group Policy, but I cannot find any group policy or guide on how to restrict user access
to Computer Management (different to Server Manager). When using Win-X shortcut to open the 'Administrator's shortcuts' near the windows icon, I have locked down everything except Computer Management. Computer Management gives direct access to Disk Management,
Shares etc, which are locked down for users. But Windows Server Backup is still accessible. Can someone please guide me on how to restrict access to both Computer Management and Windows Server Backup.
Thanks in advance.
Terry.Prevent running of Windows Server Backup
Computer Configuration\Policies\Windows Settings\Security Settings\File System
Right click on File System - Add File - Drill down to \System32\wbadmin.msc
On the Database Security ACL that pops up - Remove Creator Owner, Remove Users and check Adminstrators have Full Access.
On the Object window - choose Propagate inheritable permissions to all... (Default) -
RDS 2012 Connection Broker and round robin DNS?
Hi,
I have a set-up with three session host servers and one of them is also a connection broker. Round robin DNS is configured for the three servers and the clients, who are all on our internal networks, can connect just fine to the farm name. My
questions is, is there any point in having round robin configured since the connections still need to go through the CB? Could i just have one DNS-record for the farm name pointing to the CB? My initial though was that round robin would add
redundancy, but does it realy? I've tried to find answers on this but none of the articles and posts i've found are realy clear to me.
Quite often the initial connection for clients is slow and my theory is that it's caused by the RR DNS records.Hi,
Thank you for posting in Windows Server Forum.
I think we need to have DNS RR entries for our RDS environment because DNS RR will be used by RDP clients to connect to the RD Connection Broker servers. Once when we allowed the entries of all server to DNS RR, when there is alternate connection need to capture
for following server it will provided by DNS RR.
During the connection process, the end nodes (RDVH, RDSH, RDWA) will get configured with all the RD Connection Broker server names, and they will randomly choose one to connect to. The RDP clients will use the DNS Round Robin name configured to connect to the
RD Connection Broker servers randomly.
More information.
RD Connection Broker High Availability in Windows Server 2012
http://blogs.msdn.com/b/rds/archive/2012/06/27/rd-connection-broker-high-availability-in-windows-server-2012.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support -
DB Connection issue when using alternate address(tns entries)
I am trying to connect to a oracle db server. Only ready only access is given for this server. the tns entry in tnsnames.ora looks like this..
dddA = (DESCRIPTION = (ADDRESS = (PROTOCOL=TCP) (HOST=ddd001.corpnet2.com) (PORT=1521)) (CONNECT_DATA = (SERVICE_NAME = ddd.WORLD) (INSTANCE_NAME = dddA)) )
dddB = (DESCRIPTION = (ADDRESS = (PROTOCOL= TCP) (HOST=ddd002.corpnet2.com) (PORT=1521)) (CONNECT_DATA = (SERVICE_NAME = ddd.WORLD) (INSTANCE_NAME = dddB)) )
dddC = (DESCRIPTION = (ADDRESS = (PROTOCOL=TCP) (HOST=ddd003.corpnet2.com) (PORT=1521)) (CONNECT_DATA = (SERVICE_NAME = ddd.WORLD) (INSTANCE_NAME = dddC)) )
dddD = (DESCRIPTION = (ADDRESS = (PROTOCOL=TCP) (HOST=ddd004.corpnet2.com) (PORT=1521)) (CONNECT_DATA = (SERVICE_NAME = ddd.WORLD) (INSTANCE_NAME = dddD)) )
ddd = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL=TCP) (HOST=ddd001.corpnet2.com) (PORT=1521)) (ADDRESS = (PROTOCOL=TCP) (HOST=ddd002.corpnet2.com) (PORT=1521)) (ADDRESS = (PROTOCOL=TCP) (HOST=ddd003.corpnet2.com (PORT=1521)) (ADDRESS = (PROTOCOL=TCP) (HOST=ddd004.corpnet2.com) (PORT=1521)) (LOAD_BALANCE = YES) ) (CONNECT_DATA = (SERVICE_NAME = ddd.WORLD) (FAILOVER_MODE = (TYPE = select)(METHOD=basic))) )
The connection string I am using is
Connection connection=DriverManager.getConnection("jdbc:oracle:thin:@ddd001.corpnet2.com:1521:ddd","userid","pwd");
I have tried with all the 4 host names..used ddd.world instead of ddd..it did not work..the error message i am getting is
java.sql.SQLException: Io exception: Connection refused(DESCRIPTION=(TMP=)(VSNNUM=153093632)(ERR=12505)(ERROR_STACK=(ERROR=(CODE=12505)(EMFI=4)))) at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:168) at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:210) at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:323) at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:263) at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.java:365) at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:260) at java.sql.DriverManager.getConnection(DriverManager.java:512) at java.sql.DriverManager.getConnection(DriverManager.java:171)
When I try to connect through TOAD i get connected sometimes and sometimes I get ORA 12502 error If anyone has come across a solution,pls let us know.. ThanksThis sounds like an Oracle issue not a Java one. Does the connection string you're using work from SQLPlus? That error means you've got a bad SID by the way.
-
Data Modeler 3 (EA1): Connection issue when connecting to oracle 11R2
Hi all,
When I try to create a connection object for a oracle 11r2 database I get the following error:
ORA-00604: error occurred at recursive SQL level 1
ORA-22285: non-existent directory or file for FILEEXISTS operation
ORA-06512: at "SYS.DBMS_LOB", line 725
ORA-06512: at line 5
when I test the connection.
I have checked the oracle 11r2 instance and have 3 directory objects and all are correct;
SYS ORACLE_OCM_CONFIG_DIR /opt/oracle/app/oracle/product/11.2.0.1/ccr/state
SYS DATA_PUMP_DIR /opt/oracle/app/oracle/product/11.2.0.1/rdbms/log/
SYS XMLDIR /opt/oracle/app/oracle/product/11.2.0.1/rdbms/xml
What can cause this problem. I have the same issue with the older version of the data modeler
ThanksHey if you want me too I can create a tar/sr.
It happens even when I log in as sysdba. The three directory objects on the file system are all owned by oracle and oracle can rwx into those.
My user can see XMLDIR but does not have read/write on the directory object all other it does have read write.
Thanks.
datamodeler.log:
2010-10-19 11:54:14,947 [main] INFO DataModelerAddin - Oracle SQL Developer Data Modeler 2.1
2010-10-19 12:01:32,288 [AWT-EventQueue-0] ERROR AbstractDBMExtractionWizardImpl - java.sql.SQLException: ORA-00604: error occurred at recursive SQL level 1
ORA-22285: non-existent directory or file for FILEEXISTS operation
ORA-06512: at "SYS.DBMS_LOB", line 725
ORA-06512: at line 5
Environment:
About
Oracle SQL Developer Data Modeler 3.0.0
Version 3.0.0
Build 649
Copyright © 2008,2010 Oracle. All Rights Reserved.
IDE Version: 11.1.1.4.37.58.38
Product ID: oracle.datamodeler
Product Version: 3.0.0.649
Version
Component Version
========= =======
Java(TM) Platform 1.6.0_21
Oracle IDE 3.0.0
Versioning Support 3.0.0
Properties
Name Value
==== =====
awt.toolkit sun.awt.windows.WToolkit
class.load.environment oracle.ide.boot.IdeClassLoadEnvironment
class.load.log.level CONFIG
class.transfer delegate
file.encoding Cp1252
file.encoding.pkg sun.io
file.separator \
ice.browser.forcegc false
ice.pilots.html4.ignoreNonGenericFonts true
ice.pilots.html4.tileOptThreshold 0
ide.bootstrap.start 3457609345725564
ide.build 649
ide.conf D:\app\oracle\datamodeler\3.0.0\datamodeler\bin\datamodeler.conf
ide.config_pathname D:\app\oracle\datamodeler\3.0.0\datamodeler\bin\datamodeler.conf
ide.debugbuild false
ide.devbuild false
ide.extension.search.path datamodeler/extensions:jdev/extensions
ide.firstrun true
ide.java.minversion 1.6.0_04
ide.launcherProcessId 4160
ide.main.class oracle.ide.boot.IdeLauncher
ide.patches.dir ide/lib/patches
ide.pref.dir D:\Documents and Settings\StreekRG\Application Data\Oracle SQL Developer Data Modeler
ide.pref.dir.base D:\Documents and Settings\StreekRG\Application Data
ide.product oracle.datamodeler
ide.shell.enableFileTypeAssociation D:\app\oracle\datamodeler\3.0.0\datamodeler.exe
ide.splash.screen splash.png
ide.startingArg0 D:\app\oracle\datamodeler\3.0.0\datamodeler.exe
ide.startingcwd D:\app\oracle\datamodeler\3.0.0
ide.user.dir D:\Documents and Settings\StreekRG\Application Data\Oracle SQL Developer Data Modeler
ide.user.dir.var IDE_USER_DIR
ide.vcs.noapplications true
ide.work.dir D:\Documents and Settings\StreekRG\My Documents\Oracle SQL Developer Data Modeler
ide.work.dir.base D:\Documents and Settings\StreekRG\My Documents
java.awt.graphicsenv sun.awt.Win32GraphicsEnvironment
java.awt.printerjob sun.awt.windows.WPrinterJob
java.class.path ..\..\ide\lib\ide-boot.jar
java.class.version 50.0
java.endorsed.dirs D:\java\jdk1.6.0_21\jre\lib\endorsed
java.ext.dirs D:\java\jdk1.6.0_21\jre\lib\ext;C:\WINDOWS\Sun\Java\lib\ext
java.home D:\java\jdk1.6.0_21\jre
java.io.tmpdir D:\DOCUME~1\StreekRG\LOCALS~1\Temp\
java.library.path D:\app\oracle\datamodeler\3.0.0;.;C:\WINDOWS\Sun\Java\bin;C:\WINDOWS\system32;C:\WINDOWS;D:\app\oracle\product\11.1.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\system32\WBEM;%C:\WINDOWS%\system32;%C:\WINDOWS%;%C:\WINDOWS%\System32\Wbem;C:\WINDOWS\system32\WindowsPowerShell\v1.0;C:\Program Files\MySQL\MySQL Server 5.0\bin;C:\Program Files\Rational\common;C:\Program Files\Rational\ClearCase\bin;C:\Program Files\QuickTime\QTSystem\
java.naming.factory.initial oracle.javatools.jndi.LocalInitialContextFactory
java.runtime.name Java(TM) SE Runtime Environment
java.runtime.version 1.6.0_21-b07
java.specification.name Java Platform API Specification
java.specification.vendor Sun Microsystems Inc.
java.specification.version 1.6
java.vendor Sun Microsystems Inc.
java.vendor.url http://java.sun.com/
java.vendor.url.bug http://java.sun.com/cgi-bin/bugreport.cgi
java.version 1.6.0_21
java.vm.info mixed mode
java.vm.name Java HotSpot(TM) Client VM
java.vm.specification.name Java Virtual Machine Specification
java.vm.specification.vendor Sun Microsystems Inc.
java.vm.specification.version 1.0
java.vm.vendor Sun Microsystems Inc.
java.vm.version 17.0-b17
jdbc.driver.home /D:/app/oracle/product/11.1.0/db_1/
jdbc.library /D:/app/oracle/product/11.1.0/db_1/jdbc/lib/ojdbc5.jar
line.separator \r\n
oracle.home D:\app\oracle\datamodeler\3.0.0
oracle.ide.util.AddinPolicyUtils.OVERRIDE_FLAG true
oracle.net.tns_admin D:\app\oracle\datamodeler\3.0.0\network\admin
oracle.translated.locales de,es,fr,it,ja,ko,pt_BR,zh_CN,zh_TW
oracle.xdkjava.compatibility.version 9.0.4
orai18n.library /D:/app/oracle/product/11.1.0/db_1/jlib/orai18n.jar
os.arch x86
os.name Windows XP
os.version 5.1
path.separator ;
reserved_filenames con,aux,prn,lpt1,lpt2,lpt3,lpt4,lpt5,lpt6,lpt7,lpt8,lpt9,com1,com2,com3,com4,com5,com6,com7,com8,com9,conin$,conout,conout$
sun.arch.data.model 32
sun.boot.class.path D:\java\jdk1.6.0_21\jre\lib\resources.jar;D:\java\jdk1.6.0_21\jre\lib\rt.jar;D:\java\jdk1.6.0_21\jre\lib\sunrsasign.jar;D:\java\jdk1.6.0_21\jre\lib\jsse.jar;D:\java\jdk1.6.0_21\jre\lib\jce.jar;D:\java\jdk1.6.0_21\jre\lib\charsets.jar;D:\java\jdk1.6.0_21\jre\classes
sun.boot.library.path D:\java\jdk1.6.0_21\jre\bin
sun.cpu.endian little
sun.cpu.isalist pentium_pro+mmx pentium_pro pentium+mmx pentium i486 i386 i86
sun.desktop windows
sun.io.unicode.encoding UnicodeLittle
sun.java2d.ddoffscreen false
sun.jnu.encoding Cp1252
sun.management.compiler HotSpot Client Compiler
sun.os.patch.level Service Pack 3
svnkit.sax.useDefault true
user.country US
user.dir D:\app\oracle\datamodeler\3.0.0\datamodeler\bin
user.home D:\Documents and Settings\StreekRG
user.language en
user.name streekrg
user.timezone America/New_York
user.variant
windows.shell.font.languages
Extensions
Name Identifier Version Status
==== ========== ======= ======
Code Editor oracle.ide.ceditor 11.1.1.4.37.58.38 Loaded
Database UI oracle.ide.db 11.1.1.4.37.58.38 Loaded
Diff/Merge oracle.ide.diffmerge 11.1.1.4.37.58.38 Loaded
Extended IDE Platform oracle.javacore 11.1.1.4.37.58.38 Loaded
Help System oracle.ide.help 11.1.1.4.37.58.38 Loaded
History Support oracle.jdeveloper.history 11.1.1.4.37.58.38 Loaded
Import/Export Support oracle.ide.importexport 11.1.1.4.37.58.38 Loaded
Index Migrator support oracle.ideimpl.indexing-migrator 11.1.1.4.37.58.38 Loaded
Log Window oracle.ide.log 11.1.1.4.37.58.38 Loaded
Mac OS X Adapter oracle.ideimpl.apple 11.1.1.4.37.58.38 Loaded
Navigator oracle.ide.navigator 11.1.1.4.37.58.38 Loaded
Object Gallery oracle.ide.gallery 11.1.1.4.37.58.38 Loaded
Oracle IDE oracle.ide 11.1.1.4.37.58.38 Loaded
Oracle SQL Developer Data Modeler oracle.datamodeler 3.0.0.649 Loaded
Peek oracle.ide.peek 11.1.1.4.37.58.38 Loaded
Persistent Storage oracle.ide.persistence 11.1.1.4.37.58.38 Loaded
Property Inspector oracle.ide.inspector 11.1.1.4.37.58.38 Loaded
QuickDiff oracle.ide.quickdiff 11.1.1.4.37.58.38 Loaded
Replace With oracle.ide.replace 11.1.1.4.37.58.38 Loaded
Runner oracle.ide.runner 11.1.1.4.37.58.38 Loaded
VHV oracle.ide.vhv 11.1.1.4.37.58.38 Loaded
Versioning Support oracle.jdeveloper.vcs 11.1.1.4.37.58.38 Loaded
Versioning Support for Subversion oracle.jdeveloper.subversion 11.1.1.4.37.58.38 Loaded
Virtual File System oracle.ide.vfs 11.1.1.4.37.58.38 Loaded
Web Browser and Proxy oracle.ide.webbrowser 11.1.1.4.37.58.38 Loaded
audit oracle.ide.audit 11.1.1.4.37.58.38 Loaded
oracle.ide.indexing oracle.ide.indexing 11.1.1.4.37.58.38 Loaded
Maybe you are looking for
-
Adobe CS4 OpenGL issues with 10.6.2 and Intel GMA950 video card
I just upgraded to Adobe CS4 and in PS I cannot enable OpenGL. I'm running 10.6.2 on a Macbook with the Intel GMA950 video card. I was wondering if 10.6.2 does not have the relevant drivers for CS4 to recognize this chipset or that since the video ca
-
Ical to Cellphone via bluetooth or whatever...?
Ok - this is really getting to me... I have a samsung a900 "blade" cellphone. I can get my address book to my cell just fine using bluetooth - but why not my ical? I have no idea on where to start or whatever. I have tried to export my calendar then
-
Java.lang.ClassFormatError while starting JSPM. SAP NW04s SR2
Dear All, JSPM issued the following error when it was started. I have installed NW04s SR2 Java only and want to patch it to SP10 #Error while executing phase.## #1.5#C000097C2FC400000000006559FA59FA00042BDF044BF5D8#1174136756631#/System/Server/Upgrad
-
Error when texting on iPhone 4 "this message has attachments which were lost" (there are no attachments) friend has blackberry - help!!
-
How should I write HANA JDBC URL for windows authentification?
Hi, I got a HANA configured windows AD authentification, which already be tested successfully on HANA Studio. Now my app want to use JDBC to establish a HANA connection, but I have no idea how to append the parameter at the end of the JDBC