RDS 2012 R2 - Outlook - RemoteApp - Credentials Window Hidden

We have deployed a 2012 R2 RDS Farm with RemoteApp(s) published via RDWEB but have encountered an issue with Outlook.
The application launches and operates correctly but when the users are required to authenticate with the Exchange Server the credentials dialogue window is not visible.
If I access Outlook via an RDP session directly on the server desktop, the credentials box pops up and can be populated accordingly.
It appears that when Outlook is launched as a RemoteApp the credentials popup window is hidden/no visible.
Has anyone else encountered this issue?

Hi Dicki,
Thank you for posting in Windows Server Forum.
Here providing you some links if can resolved your issue:
1. "There are no products affected
by this package installed on this system."
2. (Solved)-Outlook2010-kb2459115-fullfile-x64-glb cannot be installed: There are no products affected by this package installed on this system
Hope it helps!
Thanks,
Dharmesh

Similar Messages

RDS 2012 R2 - open connection in windowed mode?

We built a new RDS 2012 R2 environment and are publishing a full desktop for use with remote users. The issue we are having is we would like the users to be able to open the connection in a windowed mode. Right now when the users logs onto the RD web access
server and clicks the collection icon the connection opens full screen across all the monitors the user has. I see no way to configure this option. Is is possible to have the connection open in a windows VS full screen across every monitor?

Hi Brock,
Firstly sorry for delay response.
You can set RDP setting for RDS Desktopheight & DesktopWidth. Refer this article for more information.
In addition, you can use mstsc option for editing existing RDC(.rdp) configuration file. Also you can use
mstsc /span for multiple monitor. Please check below articles for more details.
1. Mstsc
2. Using Multiple Monitors in Remote Desktop Session
Hope it helps!
Thanks,
Dharmesh

RDS 2012 R2 - RemoteApp Disconnected

Hi RDS 2012 R2 Experts,
I would like some guidance here if possible
My setup is a follow.
1x 2012r2 with the following role, Broker, Web access, Gateway and License called RDS01
2x 2012r2 Session Host called RSH01 an RSH02
1x wildcard cert
I would like to my users to be able to either internal and external to use the same link, remote.mydomain.com since my internal domain is mydomain.local
What i have done so far.
Created a DNS Zone called remote.mydomain.com and added the following records there.
REMOTE, it points to web access server IP 192.168.1.31 ( same server for Gateway and Broker )
2x RDSFarm, one record points to RSH01 and the other to RSH02, 192.168.1.32 and 33
Gateway, the record points to 192.168.1.31 ( same servers as broker and web access)
Broker, the record points to 192.168.1.31 ( same servers as web access and gateway)
i have set the gateway manager the following
Edited the deployment RD Gateway to remote.mydomain.com
Installed the wildcert for all the roles, *.mydomain.com in all 4 roles
created Manage Local computer groups and added both RSH01 and 02, RDSFarm record, remote record, gateway record and broker record
linked the allowed resources with the policy and users ( also tried allow users to connect to any resources )
configure the gateway in the RD Gateway farm
Configured the IIS to
auto redirect
and the DefaultTSGAteway under Pages to remote.mydomain.com
Also I used the Set-PublishName (http://gallery.technet.microsoft.com/Change-published-FQDN-for-2a029b80) to change it to broker.mydomain.com
Now, the issue I have is, when users either internally or externally try to launch a RemoteApp they get the error.
RemoteApp Disconnected
This computer cant connect to the remote computer.
Try connecting again.
To overcome this error I did the following:
Set-PublishName to RDSFarm.mydomain.com ( it is using the round robin to get to the session host servers)
There is two problem with this setup.
I no longer can shadow the users under Connections in the broker ( it seems to be bypassed )
I get certificate mismatch due the servers names
What I would like to achieve is to fix both problems above.
Thanks for any advice in advance.
N0tl3_Bouya

Hi,
Thank you for posting in Windows Server Forum.
Initially check that you have applied external used FQDN of server under Server name in RD Gateway Deployment properties and used Bypass RD Gateway for local address.
Please try to perform the steps
• Create a new DNS zone, .COM to allow split-brain DNS (so that internal clients can resolve external names internally)
• Create a relevant DNS entry in the aforementioned zone to point to the RDS environment’s internal IP address
• Create a relevant DNS entry in external DNS to point to the firewall which is publishing RDS’s external IP address
• Use the following script to change the FQDN of the RDP files provided by RD Web Access / RemoteApp and Desktop connection feed
Change published FQDN for Server 2012 or 2012 R2 RDS Deployment
http://gallery.technet.microsoft.com/Change-published-FQDN-for-2a029b80
In addition, for shadow related issue you can use the server in administrative mode use mstsc /shadow command and check the result.
Detailed walkthrough on Remote Control (Shadowing), reintroduced in Windows Server 2012 R2
Hope it helps!
Thanks.
Dharmesh Solanki

RDS 2012 R2 RemoteApp Server Name Mismatch

Hi All,
I wonder if someone can scratch my head on this.
Brand new RDS 2012 R2 deployment.
RDS01 with Connection Broker and Session Host Roles installed
RDS02 with Web Access and Gateway roles installed
one ssl certificate with one domain remote.mycompany.com
the certificate have been imported to all the servers via the Edit Deployment
the local domain is mycompany.local
the problem that i am having is that when i launch RemoteApp after login in the remote.mycompany.com externally, i get Certificate mismatch, because it is contact the local name of the Session host server RDS01.
What i tried so far.
Used the Set-PublishName (http://gallery.technet.microsoft.com/Change-published-FQDN-for-2a029b80) without success
Try to configure RDS01 certificate via (http://ryanmangansitblog.wordpress.com/2013/03/10/configuring-rds-2012-certificates-and-sso/)
Check Any resources ( http://social.technet.microsoft.com/Forums/en-US/d1b0ebe4-9e53-47ff-8c75-43fd91ff538a/windows-2012-rds-certificate-mismatch?forum=winserverTS)
Has anybody out there could shade me some knowledge in how to rectify the mismatch name warning.
Thanks
Elton

Hi -TP,
Answering your queries.
1_the Set-RDPublishedName was successful, restarted the servers, refreshed the RDWeb page externally, tried to connect unsuccessfully.
2_I am using externally windows 8 and internally 7 fully updated
3_it had the green successful message.
After, set-rdpublishedname command, i get an erro when try to connecting saying, RemoteApp Disconnected.
Error:
Remote desktop cant connect to the computer "remote.mycompany.com"
1)Your user account is not listed in the RD Gateway Permission ( not true, it was set for domain users and my test user is under that group)
2)you might have specified the remote computer in netbios format or ip
Do you reckon i am having this problem because the RDS01 with Connection Broker and Session Host Roles installed?
Cheers
Elton

RDS 2012 RemoteApp - Passing Parameters

Windows 2012 R2, RDS 2012, Single server configuration trying to get an remote application to accept the additional parameters to run at desktops.
Here is the command line that is needed to be run:
C:\infor\facts78\pvx\pxplus.exe *plus\cs\client –arg 192.168.110.12;10000 IN4WDX
in the remote app I have entered the following:
General:
RemoteApp program location:
C:\infor\facts\pvx\pxplus.exe
Parameters:
Always use the following command-line parameters:
*plus\cs\client –arg 192.168.110.12;10000 IN4WDX
The program starts on the remote computers, but the parameters are not being passed properly. Am I missing something special to get these to pass through. I have tried putting quotes around the parameters,
but it made no difference.
The software vendor demo's the software via an rdp desktop. I was hoping to use the remote app feature instead of the virtual desktop.

Hi Benny,
Initially please confirm whether the software is compatible to use with RemoteApp. Also the provided command line seems to be little invalid, please provide with specified full location and verify. You can check the related article for information.
http://blogs.technet.com/b/infratalks/archive/2013/02/06/publishing-remoteapps-and-remote-session-in-remote-desktop-services-2012.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

RDS 2012 R2 - RemoteApp - Certificate Mismatch

Hi!
We have a newly built RDS 2012 R2 setup.
It consists of the following:
1 x Server with the Gateway and the Web Access role
2 x Servers running a Connection Broker HA cluster
3 x Servers running as Session Hosts
The internal domain name is example.local
We have purchased a wildcard certificate for the entire setup. (called *.example.com)
An external DNS record - RDS.example.com - has been created and it NAT to the Gateway and Web Access server.
We have used the script from
https://gallery.technet.microsoft.com/Change-published-FQDN-for-2a029b80 to publish the FQDN. The name we have publised is Broker.example.com. We have created a split-brain DNS internally so that the clients can resolve external names internally.
Whenever we try to launch a RemoteApp externally we get the dreaded "Name mismatch" (and it takes about 30 seconds before we get the prompt):
Any ideas how to solve this issue?

Hi TP.
Thank you for your advice.
I've updated the Windows 7 client to RDP 8.1 and it did the trick! Thank you.
But we have several external users - and we don't have any chance of controlling if they are running RDP 8.1. I tried to import the wildcard certificate to all RDSH servers
- using the script in this link: https://social.technet.microsoft.com/Forums/windowsserver/en-US/475fb55f-e394-45d9-a6bd-a37e2a5fe86c/rds-2012-session-host-certificate-assignment?forum=winserverTS
However - that is when I see the "Name mismatch" warning when launching a RemoteApp (as mentioned in my original post). I suppose this is because the certificate is valid
only for *.example.com - and not for *.example.local?
Is there any solution to this?

Clickonce in the RemoteApp RDS 2012 R2

Hi Folks,
Searching information for applications ClickOnce, in RDS 2012 R2, in Remote Desktop Services Blog, I read these applications can't published as RemoteApp programs directly, they can now be installed and run from their hosting website through a web browser such
as Internet Explorer published as a RemoteApp program.
Exist another form in the solve is the challenge?
I can solve these challenge using RDS combined with App-v.
Suggestions?
Thanks a lot!
Wilsterman Fernandes

Hi,
Thank you for posting in Windows Server Forum.
Yeah, you can try to use Clickonce application to install on App-v server combined with RDS and then provide the path for application to use by the user through Internet Explorer. Also you can get ClickOnce app to work by installing on session host with admin
rights ad then copied the shortcut to the redirected start menu. After that user can access via full desktop method.
More information.
RemoteApp improvements in Windows Server 2012 R2
http://blogs.msdn.com/b/rds/archive/2013/11/25/remoteapp-improvements-in-windows-server-2012-r2.aspx
Difference between Remote App and Click Once
http://social.technet.microsoft.com/Forums/windowsserver/en-US/7e717b39-c3dc-4789-a4c6-22c10838e70c/difference-between-remote-app-and-click-once
Hope it helps!
Thanks.
Dharmesh Solanki

RDS 2012 (An Authentication error has occurred 0x607) - WINDOWS 8 ONLY

Hi - please help. I've read many posts relating to this error, but none have fixed my issue.
We have an RDS 2012 setup. 2 Servers. Both session hosts. only 1 is the broker. Cert from official CA.
My authentication is set to ONLY allow devices with Network Level Authority. I don't want to remove this.
Windows XP and Windows 7 can connect both internally, and externally via the RDWeb address perfectly fine, but all Win8 machines get the error "An authentication error has occurred. Code 0x607.
Can anyone please advise why?
Many thanks

Hi,
I have seen other similar cases got resolved by setting the encryption level to low and security layer to Negotiate.
Here is a thread below:
An authentication error has occured (Code: 0x607)
https://social.technet.microsoft.com/Forums/windowsserver/en-US/94780a11-23ba-4a3c-b11a-734007c2d2fd/an-authentication-error-has-occured-code-0x607?forum=winserverTS
If it is not an option for you, I suggest you check whether the SSL certificate used by RDWeb access is trusted by the Windows 8 clients. There should be a corresponding root CA certificate installed in the Trusted Certification Authorities store.
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

RDS 2012-PUBLISING REMOTEAPPS WITH VIRTUAL DESKTOP SESSION

Hello, I deployed a RDS 2012 VIRTUAL DESKTOP SESSION FARM.
Is it possible publish a REMOTEAPPS with Virtual Desktop Session?, I only find information with Remote Desktop Session
Thanks
Regards

Hi,
Seems this is not the possible scenario for deployment, we need to have Session based deployment as both virtual desktop session and session based deployment differs from other.
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

RDS 2012 R2 RemoteApp from NetShare

Hello.
We have a new RDS 2012 R2 Server.
The Problem is our ERP Software has to be started from a network share. I find out that it is not possible to publish a Application with the Servermanager which is on a netShare
So i want to try it with PowerShell, but evertime i try it i get the following error message
New-RDRemoteApp -CollectionName COLL_NAME -DisplayName APPNAME -FilePath \\SERVER\APP.EXE -IconPath \\SERVER\APP.EXE
New-RemoteApp : A Remote Desktop Services deployment does not exist on RDS2012SERVER This operation can be
performed after creating a deployment. For information about creating a deployment, run "Get-Help Set-VDIDeployment" o
r "Get-Help Set-RDSHDeployment".
At line:1 char:1
+ New-RemoteApp
+ ~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Write-Error], WriteErrorException
+ FullyQualifiedErrorId : Microsoft.PowerShell.Commands.WriteErrorException,New-RemoteApp
Same with
get-rdremoteapp -collectionname "COLL_NAME" -connectionbroker RDS2012SERVER | Format-List
We just used a default Deployment with a Single Server.
Anyone an idea?
Thanks for the Help!

use
Import-Module remotedesktopservices
then try the commands again
also, when using -connectionbroker parameter, use FQDN for broker, not netbios name.
also ensure powershell is opened as administrator and the user you log onto the machine has admin permissions on the broker.
MCITP:SA:EA:EMA2010:VA2008R2

Slow connection between outlook 2010 and Windows 2012 R2 DC

I'm having issue that affects all site users, our setup is:
1 x Exchange 2007
2 x Domain contollers, on 2008 R2 and one 2012 R2
Outlook 2010;
We have been experiencing issue's with users when they have a connection to the 2012 DC via outlook, were when they send an email it takes approx. 20 seconds for the email to be sent to the outbox. What will happen is an 'hour-glass' will appear and a bubble
appears from the outlook icon in the system tray stating that outlook is trying to establish a connection to the 2012 DC.
The users that are connected to the 2008 DC do not have this issue and the same email gets sent straight away.
We have now put in an exclusion on exchange to prevent outlook clients from connecting to the 2012 server, which has temporary resolved this issue.
as soon as we lift the exclusion the issue reappears.
I've performed PerfMon and NetMon captures of both DC's while this issue occurs but without obvious conclusion.
Has anyone come across this or able to provide with some suggestions.
thanks.
John.

Hi John,
Did you refer to Milos's suggestion and use the network monitor? Any update?
Would you please let me know whether install any third-party application (such as: some security applications) on the server 2012 r2? In addition, please type outlook.exe /safe in RUN to start Outlook in Safe Mode, then check if this issue still exists.
This will help us to confirm if the issue is caused by Outlook add-ins.
If any update, please feel free to let us know.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Users see all applications in RDS 2012 Web access in one-way trust domain environment

Hello!
We have RDS 2012 deployment in domainA.local. There is a one-way trust between domainA.local and domainB.local: A trusts B and B doesn't trust A.
A user from domainB.local authenticates in Web-access interface (wa.domainA.local) and sees
every published application in every collection in the deployment independently of UserGroups setting of collections and applications. This occurs for any domainB user.
In the security log of wa.domainA.local we can find an event :
An account failed to log on.
Subject:
Security ID:                IIS APPPOOL\RDWebAccess
Account Name:                RDWebAccess
Account Domain:                IIS APPPOOL
Logon ID:                0x2C7B16
Logon Type:                        3
Account For Which Logon Failed:
Security ID:                NULL SID
Account Name:
Account Domain:
Failure Information:
Failure Reason:                An error occurred during logon
Status:                        0xC000005E
Sub Status:                0x0
Also in network trace on wa.domainA.local kerberos error could be found:
On TGS-REQ for krbtgt/[email protected] there is an answer: KRB5KDC_ERR_S_PRINCIPAL_UNKNOWN (7), server name krbtgt/domainB.
How to deal with this issue? The aim is to show only specified applications to domainB users.
Any help would be appreciated.

Hi,
Thank you for your posting in Windows Server Forum.
Please check below links might useful for your case.
“After adding the RDS server’s computer account to the Builtin Windows Authorization Access Group domain group, the RemoteApp icons displayed perfectly.” (Quoted from
this article)
1. Remote APP list empty
2. RD
Web Access unable to access Source (RD Server)
In respect to Kerberos Error, refer this link for troubleshooting.
1. Troubleshooting Kerberos Authentication problems – Name resolution issues
2. Kerberos Authentication problems – Service Principal Name (SPN) issues - Part 2
Hope it helps!
Thanks,
Dharmesh

RDS 2012 - unable to connect to SH via webgateway

Dear all,
we have setup a RDS 2012 system following this article;
rds8-standard-3-node-remoteapp-deployment-on-windows-server-2012
It all went ok as far is I could see but Im running into the following problem.
If I use MSTSC to connect through the gateway directly things work, I get the desired SH desktop without a problem. (eg connect to SH001.domain.local using the web url for the gateway/webserver).
If I go to the external website and try to setup a connection it goes into somekind of loop. It first gives me a security warning stating it wants to connect to the connection broker, then I get a certificate error from the connection broker, which is correct
in this case, I choose to ignore the certificate warning and continue anyway. RDP then continues; Securing external connection, checking bandwith, starting the external connection. And there it hangs, it doesnt go any further and tries to connect for ever.
The external adres of the gateway is xxx.xxxx.nl and internally it xxx.xxxx.local not sure if this could be related. I noticed an article with a powershell script that would change the .local into .nl
Strange thing it worked before. I even went as far as trashing all 3 machines, removing the roles and removing them from the domain to run the install again on fresh machines with new DNS names. Still no luck.
Not sure on how to troubleshoot this any further. Eventlogs on the GW and CB show nothing special, no errors. One thing that I do notice is a recurring WMI 5605 ID - The root\cimv2\RDMS namespace is marked with the requiresEncryption flag. Access to this
namespace might be denied if the script or application does not have the appropriate authentication level. Change the authentication level to Pkt_Privacy and run the script or application again.
Thanks for any thoughts on this.
Best regards,
Louis

HI,
Can you confirm everything works internally and your problems occur when trying to access resources externally.
Firstly check the certificates and ensure you have configured self signed or trusted.
Try turning of certificate authentication for testing only - this will answer your authentication level question.
Have a look at the following post:
http://ryanmangansitblog.com/2013/03/10/configuring-rds-2012-certificates-and-sso/
It does sound like you are experencing issues with the Internal and external nameing of the gateway. There are a few ways round this. TP has written a script which will assist with the change.
http://gallery.technet.microsoft.com/Change-published-FQDN-for-2a029b80/file/103829/2/Set-RDPublishedName.ps1 If you have questions
around the use of this, reply in this post.
Ryan Mangan | Ryanmangansitblog.wordpress.com | Help keep the forums tidy, if this has helped please mark it as an answer

RDS 2012 R2 - Colors and appearance issues

Hi,
We are experiencing an annoying issue with Windows Server 2012 R2 Standard (RDS installed and two RemoteApp applications published). The thing is, sometimes, colors of taskbar, folders, screens...completely turn to black. You can run applications, open files...but
the appearance (colors) is completely screwed up. We don't know what to do about this. We restore the entire server (Virtual Machine) when this issue occurs. Anyone knows about this ?

I'm back again. My issue seems to be the same as this one : http://social.technet.microsoft.com/Forums/en-US/44f33bd6-aa45-48cb-b886-352330e3f47c/win2012-std-basic-theme-problem-?forum=winserver8gen
I figured out that my gpo did not work because the parameter "Load a specific theme" works only for users who open a session on the RDS server for the first time. So, i did this to apply the theme GPO to all RDS users, even if they have old sessions
on the server :
- I deleted all users profiles (from computer's advanced settings). Do not delete admins and .NET profiles.
- I ran a gpupdate /force
- I opened a session with a Remote Desktop user, and the Aero theme was perfectly applied.
This is just a bypass solution. A good one is to know how the "Basic theme" got corrupted, and then, find a solution to fix it. For now, i really don't know how this could happened...
For your information, before doing this, you have to install "Desktop experience" on RDS server and create the GPO which apply "Aero theme" for all RD users. This is the procedure to create it : http://social.technet.microsoft.com/Forums/windowsserver/en-US/a11255a7-98d8-497d-812d-2e9f936a0901/how-to-change-the-desktop-theme-for-all-users?forum=windowsserver2008r2general
Thanks,

RDS 2012- connect to session collection trough mstsc.exe on XP SP3

Hi!! i need to connect to a session collection based on rds 2012 directly trough mstsc.exe on xp sp3 clients... xp don't support remoteapp and desktop connection and my users can't use internet explorer to connect trough rd web Access..
Thanks!

Hi,
What you could do is upgrade Windows XP with the latest Remote Desktop Client available for Windows XP (http://support.microsoft.com/kb/969084)
Then extract the .RDP file you want from the RDS 2012 environment (or specify the properties manually in a .RDP) file.
Recently I wrote on article on the distribution of Remote Apps and desktops in Windows Server 2012, that might be useful:
http://virtualizationadmin.com/articles-tutorials/vdi-articles/general/distribution-of-remote-apps-and-desktops-in-windows-server-2012.html
Also, more info on the .RDP properties specifically needed for RDS 2012:
http://microsoftplatform.blogspot.nl/2012/04/rd-connection-broker-ha-and-rdp.html
Kind regards,
Freek Berson
The Microsoft Platform
Twitter
Linked-in
Wortell company website

RDS 2012 R2 - Outlook - RemoteApp - Credentials Window Hidden

Similar Messages

Maybe you are looking for