RDS and NLB configuration

Question

Hi,
I'm currently building a RDS farm (with NLB) but not sure if my configuration is correct. After implementation, some users get disconnected and get a new session on another RDS server.
My environment is fairly simple and consists of two RDS Session Hosts (2 NICs) in NLB, RDS Session Broker on the Domain Controller.
=====================================================================================
RDS1.domain.local
- NIC1 - 10.10.10.1 - registered in DNS as rds1.domain.local
- NIC2 - 10.10.10.3 - not registered in DNS and used for NLB and configured to be the IP address that registers with the broker.
RDS2.domain.local
- NIC1 - 10.10.10.2 - registered in DNS as rds2.domain.local
- NIC2 - 10.10.10.4 - not registered in DNS and used for NLB and configured to be the IP address that registers with the broker.
NLB Cluster address is 10.10.10.5 and registered in DNS as farm.domain.local
Farm name is FARM
NLB is configured for unicast.
Only RDS1 and RDS2 are members of the Session Broker Computers group.
=====================================================================================
I'm wondering if this is a correct configuration, especially with the DNS registrations. All users are configured for 1 session only.

Answer 1

Hi,
Thanks for the question.
It seems that the configurations are OK.
You can also refer to this article:
Geek of All Trades: Expand Beyond One
You can add a second RD Session Host server following these five relatively simple steps.
Hope this helps.
Best Regards
Jeremy Wu