RDS invalid licensing Windows Server 2003 Client

I have two Windows Server 2012 Session Host Server and two Windows 2012 Connection Brokers. One Connection Broker configured with remote desktop License.We are Using License type is per device cal.
On Server A, I can access RDP from Windows 7 clients and from Windows XP clients Windows Server 2003 Clients.
On Server B I can only RDP from Windows 7 clients and Windows XP Clients NOT from Windows Server 2003 Clients). The error is"The remote session was disconnected because the remote computer received an invalid licensing message from this computer"

Hi Gyan,
Which version of client RDP you are using in your environment?
Did you receive any particular Event ID during this issue?
Here for your issue I found something to let u know, if licensing mode on the terminal server is set to Per Device but the license server is configured to issue only Per User CALs, then only temporary Per Device licenses are issued from the available pool of
licenses. The license cannot upgraded. 
Please check the license is properly configured and activated. If not then you can contact MS clearing house or try to change the terminal server licensing mode.
Please refer below link for more information.
The remote session was disconnected because the local computer's client access license could not be upgraded or renewed
http://technet.microsoft.com/en-us/library/cc737592(v=ws.10).aspx
You need to verify the terminal server because it can’t able to locate the license server.
The terminal server cannot locate the license server
http://technet.microsoft.com/en-us/library/cc758805(v=ws.10).aspx
Hope it helps!
Regards.

Similar Messages

  • Invalid OTN Link for 9.2.0.1 EE/SE/S/P/Client 32-bit Windows Server 2003

    Hello,
    The OTN download for Oracle 9i Release 2 (9.2.0.1) 32-bit for Windows Server 2003 is incorrect. This link brings you to the 9.2.0.3 PATCHSET download, and NOT the base release software.
    Here is the contents of the link when followed.
    "Oracle9i Database Release 2 Enterprise/Standard/Personal/Client Edition for Windows Server 2003 (32-bit)
    Download the Complete Files
    OUI220180.zip (47,405,300 bytes)
    9203WIN2K3.zip (181,643,734 bytes)
    Documentation
    Oracle9i Database Release 2 for Windows Server 2003 (32-bit) Release Notes (PDF/HTML)
    Directions
    1. Before downloading, please review the product certification information for this product.
    2. Consult the release notes for download and installation instructions."
    I desparately need to download the 9.2.0.1 32-bit Client. The eDelivery site only has the 9.2.0.1 64-bit release. I contacted Oracle support to have CDs shipped and they arrived today however no 32-bit client was contained inside. The sticker on the back directs you to OTN for download.
    Is anyone able to help me?
    Regards,
    Steve

    Found the solution
    Steve - you need to install 9.2.0.1 for NT/2000/XP and then apply the 9.2.0.3 patch to bring it to 9.2.0.3 for Windows 2003.
    It's in the release notes on that page:
    http://download-west.oracle.com/docs/html/B10924_01/toc.htm
    Hope that helps..

  • Invalid Link for 9.2.0.1 EE/SE/S/P/Client 32-bit Windows Server 2003

    Hello,
    The OTN download for Oracle 9i Release 2 (9.2.0.1) 32-bit for Windows Server 2003 is incorrect. This link brings you to the 9.2.0.3 PATCHSET download, and NOT the base release software.
    Here is the contents of the link when followed.
    "Oracle9i Database Release 2 Enterprise/Standard/Personal/Client Edition for Windows Server 2003 (32-bit)
         Download the Complete Files
              OUI220180.zip (47,405,300 bytes)
              9203WIN2K3.zip (181,643,734 bytes)
         Documentation
              Oracle9i Database Release 2 for Windows Server 2003 (32-bit) Release Notes (PDF/HTML)
         Directions
              1. Before downloading, please review the product certification information for this product.
              2. Consult the release notes for download and installation instructions."
    I need to download the 9.2.0.1 32-bit Client. The eDelivery site only has the 9.2.0.1 64-bit release.
    OTN Admins - please help!
    Regards,
    Steve

    Are there any moderators checking this forum?
    I called Oracle support and requested a shipment for Oracle9i for Windows Server 2003. I made sure that whatever media pack they were sending me what explicitly for 2003. It was for both 2000 & 2003 however the client/database CDs for 2003 are only for 64-bit.
    If 9i 32-bit is the only certified version for AMD processors why isn't it in included the media pack? There's a nice sticker on the back that notifies you that the 32-bit software requires an additional upgrade that is available from OTN.
    So, If OTN's link is bad and no one is from OTN is moderating this site then how on Earth is anyone able to aquire this software version? Oracle's Metalink offers no solution outside of posting to this forum.
    -Steve

  • Connect SQL Server 2012 from Windows Server 2003 with native client 9.0

    Hi,
    I currently have a setup where ETL tool Ab Intio, running on a Linux server, connects to the SQL Server 2005 through a passthrough Wintel server with Windows Server 2003 OS using SQL server native client 9.0
    Now I have the requirement to upgrade the SQL server from 2005 to 2012.
    My question is, will it be possible to connect to SQL server 2012 through Windows Server 2003 with native client 9.0?
    As per the specs, I need native client 11.0+ to fully support SQL Server 2012, but then, as per specs, native client 11.0 doesnot run on Windows server 2003. OS upgradation is currently not on the cards.
    So will it be possible to the run the basic queries we use currently, if we can connect SQL server 2012 through Windows Server 2003 with native client 9.0/10.0, without updgrading the OS of the Wintel server?
    Thanking you in advance! 

    Hi Soumya,
    Yes, you can use the SQL Server Native Client shipped with SQL Server 2005 to connect to a SQL Server 2012 instance, and there is no need to upgrade the operating system.
    Regards,
    Mike Yin
    TechNet Community Support

  • Oracle Client 9.2.0.1 on Windows Server 2003 Web Edition???

    Hi,
    I will install the Oracle Client 9.2.0.1 on
    Windows Server 2003 Web Edition, but when I run the
    setup-program the following error is coming:
    'Windows cannot open this program since it has been disabled.'
    I think the program is suppressed by Microsoft.
    Can anybody help me???
    Thanks,
    Norman

    As Windows 2003 is officially released this week, I believe Oracle will shortly announce which versions of the database will be supported on Windows 2003. Stay tuned.
    Alison

  • Instant Client not working on Windows Server 2003

    Hi everybody,
    I have installed the Instant Client libraries on a machine running Windows Server 2003 in order to connect to a remote Oracle server. I also installed the sqlplus package. I copied them in a local directory, updated the Environment variable PATH and restarted. When I try to execute sqlplus to test if everything works fine, I get the following errors:
    sqlplus user/[email protected]:1521/orcl
    SP2-1503: Unable to initialize Oracle call interface
    SP2-0152: ORACLE may not be functioning properly
    Also, when I try to use PHP OCI8 functions like oci_connect() I get an error like:
    PHP Warning: oci_connect() [function.oci-connect]: OCIEnvNlsCreate() failed. There is something wrong with your system - please check that PATH includes the directory with Oracle Instant Client libraries
    I checked it and the PATH variable points to the instant client libraries.
    Any ideas?
    Thanks in advance!

    I get the following errors: sqlplus user/[email protected]:1521/orcl SP2-1503: Unable to initialize Oracle call interface SP2-0152: ORACLE may not be functioning properly Also, when I try to use PHP OCI8 functions like oci_connect......Like the error suggested, the instant client libraries does not include the Network Service required by SQLPLUS.
    The connect string you are trying to use doesn't work for SQLPLUS. SQLPLUS will need proper TNS names configured.
    In another words, instanct client libraries installation is not enough to use sqlplus. Use Runtime installation or Customized installation.

  • Phonefactor with RRAS(Windows Server 2003) - VPN client timeout after 20 seconds -- too fast!

    [Note that I have previously posted this question on Experts Exchange... but have not found a solution yet].
    We are a small business and would like to switch to two-factor authentication for VPN connections. We spent nearly a year helping Barracuda debug their small business VPN appliance and finally they took their boxes back and gave us back our money - they
    just couldn't get file sharing to work consistently with some new firmware they had to install due to a patent case.
    So... now we are trying Phonefactor.
    Our VPN setup is RRAS on a Windows Server 2003 domain controller.
    We have installed Phonefactor, enabled it as a Radius server, and configured RRAS to point to Phonefactor for Radius authentication. We configured phonefactor to send text messages for authentication, as we figured that would be less disruptive than a phone
    call.
    It all works except... the timeout for VPN clients is only 20 seconds! By the time we receive the text message on a cell phone, sometimes there is only 5 or 6 seconds to get the six digit code typed into a reply on the cell phone... and unless we are really
    nimble, that is frequently not enough time!
    When the VPN client times out, it gives an Error 718 "The connection was terminated because the remote computer did not respond in a timely manner."
    How can we increase the timeout on the VPN clients, so we can more reliably enter the authentication code in a reply back to phonefactor?
    Things we have tried:
    1) Connecting (PPTP) from different Windows clients to see if we get different timeout limits. So far we have tried several Windows 7 boxes and a Windows Server 2003 as the client, but in all cases the timeout is 20 seconds.
    2) On the windows clients: Searching through the PPTP client settings to see if there is one labeled "connection timeout". So far we have found nothing.
    3) On the windows 2003 server: Modifying the RRAS Radius Server time-out to be 30 seconds, 60 seconds, 300 seconds. We've tried restarting RRAS after these changes, but the client connection timeout is still 20 seconds.
    4) In the phonefactor configuration: Searching through the radius server settings to see if there is one labeled "connection timeout". So far we have found nothing.
    5) Using NTRadPing to connect directly to the phonefactor radius server. With NTRadPing we were able to wait more than 60 seconds without a timeout from phonefactor. So we don't *think* at this point that the issue is within phonefactor.
    6) We have asked phonefactor support, but their response is "hmmm... good question, we don't know, that sounds like a problem with your vpn client". And they could well be correct.
    7) Search the web for how to increase either the stock windows VPN client timeout, or the RRAS radius authentication timeout. No luck so far.
    8) Try this registry hack:
    http://windowsitpro.com/networking/solving-ras-718-error. Didn't help.
    Any ideas?
    thanks!

    Hi fdc2005,
    Thanks for the post.
    However, generally, we first type User Name, Password, then click connect to establish the VPN connection. Such as:
    Therefore, I have a little confusion about the timeout you mentioned. Would you please provide us more details.
    Regarding error 718, please check if the following could help:
    If you have a third-party VPN server which does not support MS-CHAPv2 as an authentication method and supports only MS-CHAPv1, you will need to use either CHAP or PAP to connect from the Windows Vista VPN client until the server you use starts supporting MS-CHAPv2.
    Steps to follow for resolution:
    (1) Check if the Routing and Remote Access Server (RRAS) is configured to allow connections with MS-CHAPv2
    (2) Check if the RADIUS server policy supports MSCHAPv2 (This step is needed if you control access to clients using Remote Access Policies on the IAS/NPS server)
    Quote from:
    Troubleshooting Vista VPN problems.
    Hope this helps.
    Jeremy Wu
    TechNet Community Support

  • How To Configure GP For Client DC on Windows Server 2003

    Dear all,
    I have been installed windows server 2003 and make one DC on my server. And i create several group and want to make policy for that each group. For example I have created '2014' group and all user who join my dc and registered as a part of '2014' group couldn't
    access their browser such as Firefox and IE and couldn't access their bluetooth.  How can I make it possible?
    Thanks before.
    Warm Regards,

    Hi Denni Sembiring,
    Could you clarify your question “all user who join my dc and registered as a part of '2014' group couldn't access their browser such as Firefox and IE and couldn't access their
    Bluetooth”, are you want to realize to limit some user can access the specific software and computer device? GPOs can be linked to the following levels:
    •Site
    •Domain
    •Organizational Unit
    We can not link GPO to group, if you want to limit specific user can only access specific software you can refer the following KB to restrict user access.
    The related KB:
    How To use Software Restriction Policies in Windows Server 2003
    http://support.microsoft.com/kb/324036
    I’m glad to be of help to you!
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • I am trying to remote into a Windows Server 2003 from a Windows 7 machine and having issues

    I am trying to remote into a Windows Server 2003 from a Windows 7 machine.  It says "The terminal server has exceeded the maximum number of allowed connections".
    My first stop in trying to solve this problem was here:
    [URL="http://www.howtogeek.com/howto/windows/command-line-hack-for-terminal-server-has-exceeded-the-maximum-number-of-allowed-connections/"]howtogeek.com[/URL]
    And it says:
    [I]
    [INDENT]This problem happens because Windows only allows two remote terminal services connections when you are in administrative mode, and you’ve either got two people already on that server, or more likely, you’ve got a disconnected session that still thinks
    it is active.
    The problem with this error is that you have to actually get on the server console to fix the problem if the server isn’t in a domain. ([B]If you are in a domain, then just open Terminal Services Manager and log off or disconnect the sessions[/B])[/INDENT][/I]
    So it seems to suggest that all I have to do really is to run the  Terminal Services Manager but I cannot find it.
    This web site from mssqltips.com [URL="http://www.mssqltips.com/sqlservertip/1981/remote-desktop-error-terminal-server-has-exceeded-the-maximum-number-of-allowed-connections/"](click here)[/URL] says all I need to do is first execute "mstsc /
    admin" from the command line.  But, when I do that, I get a message when I try to remote to the server, that says this: "To log on to this remote console session, you must have administrative permissions on this computer".
    So, what now?  What do you suggest?

    Hi Bobby,
    Yes, it is by design. By default, Windows Server only accepts two concurrent administrative sessions (Administrative Mode). It means that only two administrators can work on the server at
    the same time.
    If you would like more concurrent sessions, you need to purchase RDS CALs, install Terminal Services related server roles with proper configurations on the server.
    Remote Desktop for Administration (server 2003)
    http://technet.microsoft.com/en-us/library/cc785186(v=ws.10).aspx
    What Is Terminal Services?
    http://technet.microsoft.com/en-us/library/cc782486(v=ws.10).aspx
    Terminal Services Configuration
    http://technet.microsoft.com/en-us/library/cc787078(v=ws.10).aspx
    Purchase client access licenses
    http://technet.microsoft.com/en-us/library/3660ac5a-7468-48d3-b7e8-5529de8fb6c5
    Thanks.
    Jeremy Wu
    TechNet Community Support

  • Tiger 10.4.4 or 5 and Windows Server 2003 Services For Macintosh unstable??

    We are running these tested Mac clients here:
    macMini 1.5Ghz 10.4.5
    G4 Quicksilver 800Mhz 10.4.4
    G4 Dual Mirror PowerMac 10.4.4
    They mount volumes on these servers:
    Dell Windows Server 2000 (SFM)
    Dell Windows Server 2003 (SFM)
    Xserve G4 OS 10.3.9 Server
    Macs sleep settings are this:
    Computer sleep=1 hour
    Display sleep=1 hour
    Hard drive=sleep
    Symptom:
    When the Mac goes to sleep, the 2 Windows Mac File servers volumes are
    disconnected. Upon wake, the error message stating they were disconnected are waiting.
    The Xserve volume is untouched. This should not be a problem
    since the Windows servers are running Appletalk via IP not
    native Appletalk protocol.
    Comments:
    Might be related to the lookupd bug in Tiger? http://www.macintouch.com/readerreports/macosx1042/topic3108.html
    Here’s the system log from the macMini: (13:47 is when I woke it and manually mounted the volumes)
    Feb 23 09:37:22 M00XXX /System/Library/Frameworks/ApplicationServices.framework/Frameworks/ATS.framewo rk/Support/ATSServer: ***********************************
    Feb 23 13:14:13 M00XXX kernel[0]: AFPSleepWakeHandler: going to sleep
    Feb 23 13:14:13 M00XXX kernel[0]: AFP_TCP ASP_TCP SendSleepPkt: sending regular sleep
    Feb 23 13:14:13 M00XXX kernel[0]: AFP_TCP ASP_TCP SendSleepPkt: sending regular sleep
    Feb 23 13:14:24 M00XXX configd[32]: AppleTalk shutdown
    Feb 23 13:14:25 M00XXX configd[32]: AppleTalk shutdown complete
    Feb 23 13:14:28 M00XXX launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[88]: exited abnormally: Hangup
    Feb 23 13:14:28 M00XXX configd[32]: posting notification com.apple.system.config.network_change
    Feb 23 13:47:06 M00XXX kernel[0]: System Sleep
    Feb 23 13:47:06 M00XXX kernel[0]: System Wake
    Feb 23 13:47:06 M00XXX kernel[0]: Wake event 0020
    Feb 23 13:47:08 M00XXX kernel[0]: UniNEnet::monitorLinkStatus - Link is up at 100 Mbps - Full Duplex
    Feb 23 13:47:08 M00XXX kernel[0]: USB caused wake event (OHCI)
    Feb 23 13:47:08 M00XXX configd[32]: setting hostname to "M00XXX.local"
    Feb 23 13:47:08 M00XXX configd[32]: AppleTalk startup
    Feb 23 13:47:10 M00XXX kernel[0]: AFPSleepWakeHandler: waking up
    Feb 23 13:47:11 M00XXX configd[32]: AppleTalk startup complete
    Feb 23 13:47:12 M00XXX configd[32]: posting notification com.apple.system.config.network_change
    Feb 23 13:47:12 M00XXX lookupd[7515]: lookupd (version 369.2) starting - Thu Feb 23 13:47:12 2006
    Feb 23 13:47:12 M00XXX configd[32]: setting hostname to "m00xxx.secret.com"
    Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_Reconnect: Invalid reconn token length 0 /Volumes/VOL1
    Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_Reconnect: AFP Version 4 does not support reconnect /Volumes/VOL1
    Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_Reconnect: Reconnect not allowed /Volumes/VOL1
    Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_Reconnect: posting to KEA to unmount /Volumes/VOL1
    Feb 23 13:47:13 M00XXX KernelEventAgent[39]: tid 00000000 received VQ_DEAD event (32)
    Feb 23 13:47:13 M00XXX KernelEventAgent[39]: tid 00000000 type 'afpfs', mounted on '/Volumes/VOL1', from 'afp_3Xs1VX4aumPi3flxDN2GLoYD-1.2c000009', dead
    Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_unmount: /Volumes/VOL1, flags 524288, pid 39
    Feb 23 13:47:13 M00XXX KernelEventAgent[39]: tid 00000000 type 'afpfs', mounted on '/Volumes/VOL2', from 'afp_3Xs1VX4aumPi3flxDN2GLoYD-2.2c00000a', dead
    Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_unmount: /Volumes/VOL2, flags 524288, pid 39
    Feb 23 13:47:13 M00XXX KernelEventAgent[39]: tid 00000000 found 2 filesystem(s) with problem(s)
    Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_Reconnect: Invalid reconn token length 0 /Volumes/Asura_Queues
    Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_Reconnect: AFP Version 4 does not support reconnect /Volumes/Asura_Queues
    Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_Reconnect: Reconnect not allowed /Volumes/Asura_Queues
    Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_Reconnect: posting to KEA to unmount /Volumes/Asura_Queues
    Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_unmount: /Volumes/Asura_Queues, flags 524288, pid 39
    Feb 23 13:47:13 M00XXX KernelEventAgent[39]: tid 00000000 type 'afpfs', mounted on '/Volumes/Asura_Queues', from 'afp_3QgJ7Z2s2fVR2flF2I2ZlbNQ-1.2c00000b', dead
    Feb 23 13:47:13 M00XXX KernelEventAgent[39]: tid 00000000 received unknown event (48)
    Feb 23 13:49:54 M00XXX kernel[0]: AFP_VFS afpfs_mount: /Volumes/Asura_Queues, pid 7519
    Feb 23 13:50:13 M00XXX kernel[0]: AFP_VFS afpfs_mount: /Volumes/VOL1, pid 7520
    Feb 23 13:50:13 M00XXX kernel[0]: AFP_VFS afpfs_mount: /Volumes/VOL2, pid 7520

    My SMB share get disconnected while my Powerbook was still running.
    Errors in system.log:
    May 8 23:08:13 snoopy KernelEventAgent[46]: tid 00000000 received VQ_DEAD event (32)
    May 8 23:08:13 snoopy KernelEventAgent[46]: tid 00000000 type 'smbfs', mounted on '/Volumes/backup', from '//HALO;CYONG@PEANUTS/BACKUP', dead
    May 8 23:08:13 snoopy KernelEventAgent[46]: tid 00000000 found 1 filesystem(s) with problem(s)
    Anyone else having the same problem?

  • Acrobat 8 Professional and Windows Server 2003 R2 Issue

    Hi
    Our customers using Adobe Acrobat 8 Professional on Windows server 2003 R2 SP2. It works some period of time but then application stops working with this error and cannot start anymore:
    Faulting application Acrobat.exe, version 8.1.0.137, faulting module Checkers.api, version 8.1.0.137, fault address 0x000021a2.
    What can be the problem? There is nothing in the knowledgebase.
    Regards,
    Jelena

    Hello jordixip,
    You can connect your Mac to Terminal Services using Remote Desktop Connection Client . You need a license, the client software, and turning on the appropriate bits on the server. It is in Micro$oft-ese, but the overview is here.
    Good Luck!
    Zubin
    iMac G4   Mac OS X (10.3.9)   Mac OS 9.2 & earlier, Win2k Pro & Server

  • TS140 Windows Server 2003?

    I have a customer with a new TS140 who needs to load Windows Server 2003 on the box.  The reason for having to load Windows Server 2003 is a legacy piece of software that is not compatible with newer versions of Windows.
    This is a TS140 70A4 001MUX model. It meets system requirements for the OS (we were able to purchase a Lenovo Enterprise Server 2003 OEM license from a liquidator) but the system is newer than any actually listed in the HCL for WIndows Server 2003
    Initial attempts to install using Lenovo OEM Windows Server media results in a blue screen, unsurprising given the chronological distance between the OS media and the hardware.
    EasyStartup Version 3.8.1d shipped with the server but 2008 is the earliest OS listed in the pick list.  Is there an earlier version that loads drivers for this hardware for Server 2003?  Failing that are there drivers that can be slipstreamed into the OS install media?
    The big question:  Has anyone actually installed Server 2003 on this hardware?  Should I even bother trying?
    Thanks for any help,
    Coypu

    Got a fix for you:
    install Hyper-V 2012 R2 on the TS140 ( it's free!)
    http://technet.microsoft.com/en-us/evalcenter/dn205299.aspx 
    then...  install your 2003Server as a VM.
    Access it through any workstation running Remote Desktop connection.
    Or access if directly from the "server Core Hyper-V" machine by running the (free!) Hyper-V Tools. ( this provides a GUI, and remote desktop client)
    see  http://www.probus-it.se/hypervtools 
    another great tool for those running Hyper-V 2012 "core" (the free OS with no GUI) is the very handy A43
    see http://www.a43filemanager.com/
    more great tools here... http://hypervking.info/hyper-v-tools/ 

  • Installation problem with windows server 2003 64 bit

    I downloaded all hyperion components from e-deleivery for windows server 2003 64 bit when i tried to install it a message said that some component are not compatible when i removed stratigic finance and FDM components the installation started and completed .in the configuration phase many components failed to configured and here's a copy of the log file:
    (Nov 21, 2010, 02:25:51 PM), com.hyperion.cis.config.wizard.adapter.WizardFormAdapterPanel, ERROR, The specified database is already configured.
    (Nov 21, 2010, 02:30:34 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
    java.lang.NumberFormatException: null
         at java.lang.Integer.parseInt(Unknown Source)
         at java.lang.Integer.valueOf(Unknown Source)
         at com.hyperion.hit.registry.ServiceComponentImpl.getPort(ServiceComponentImpl.java:45)
         at com.hyperion.hub.HubAppServerDeployer.checkOpenLDAPFromRegistry(HubAppServerDeployer.java:282)
         at com.hyperion.hub.HubAppServerDeployer.updateOpenLDAPPort(HubAppServerDeployer.java:175)
         at com.hyperion.hub.HubAppServerDeployer.preDeploy(HubAppServerDeployer.java:113)
         at com.hyperion.cis.config.AppServerDeployer.preDeploy(AppServerDeployer.java:205)
         at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeAppDeploymentTask(RunAllTasksWizardAction.java:604)
         at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:215)
         at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
    (Nov 21, 2010, 02:41:18 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
    (Nov 21, 2010, 02:43:35 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
    (Nov 21, 2010, 02:45:21 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
    (Nov 21, 2010, 02:45:21 PM), com.hyperion.awb.config.AWBDBConfigurator, ERROR, Error:
    java.lang.NullPointerException
         at com.sun.org.apache.xerces.internal.dom.ElementImpl.normalize(Unknown Source)
         at com.sun.org.apache.xerces.internal.dom.ElementImpl.normalize(Unknown Source)
         at com.sun.org.apache.xerces.internal.dom.ElementImpl.normalize(Unknown Source)
         at com.sun.org.apache.xerces.internal.dom.ElementImpl.normalize(Unknown Source)
         at com.hyperion.awb.config.PIRegistartionXMLWriter.updateHubDetails(PIRegistartionXMLWriter.java:265)
         at com.hyperion.awb.config.AWBDBConfigurator.configure(AWBDBConfigurator.java:249)
         at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDbConfigTask(RunAllTasksWizardAction.java:658)
         at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:202)
         at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
    (Nov 21, 2010, 02:45:21 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
    com.hyperion.cis.config.ProcessingException
         at com.hyperion.awb.config.AWBDBConfigurator.configure(AWBDBConfigurator.java:275)
         at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDbConfigTask(RunAllTasksWizardAction.java:658)
         at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:202)
         at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
    (Nov 21, 2010, 02:47:29 PM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, There is no logical instance of Shared Services web application in Registry
    (Nov 21, 2010, 02:47:29 PM), com.hyperion.awb.config.AWBAppServerDeployer, ERROR, Error occured in deRegisterOldProductInstance(): null
    (Nov 21, 2010, 02:47:29 PM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, There is no logical instance of Shared Services web application in Registry
    (Nov 21, 2010, 02:47:29 PM), com.hyperion.awb.config.AWBAppServerDeployer, ERROR, ERROR:
    com.hyperion.cis.config.AppDeployException: CMS Client cannot be created
         at com.hyperion.awb.config.AWBAppServerDeployer.publishBPMAInstanceDocument(AWBAppServerDeployer.java:704)
         at com.hyperion.awb.config.AWBAppServerDeployer.registerProductInstance(AWBAppServerDeployer.java:796)
         at com.hyperion.awb.config.AWBAppServerDeployer.postDeploy(AWBAppServerDeployer.java:350)
         at com.hyperion.cis.config.AppServerDeployer.postDeploy(AppServerDeployer.java:336)
         at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeAppDeploymentTask(RunAllTasksWizardAction.java:610)
         at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:215)
         at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
    (Nov 21, 2010, 02:50:11 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
    (Nov 21, 2010, 02:51:11 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
    (Nov 21, 2010, 02:54:20 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
    (Nov 21, 2010, 02:58:04 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
    (Nov 21, 2010, 02:58:16 PM), com.hyperion.essbase.config.EssbaseAgentTaskProcessor, ERROR, Error in executing the script to register Essbase as a service: exitCode = 1
    (Nov 21, 2010, 02:58:54 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
    (Nov 21, 2010, 02:59:15 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
    (Nov 21, 2010, 02:59:16 PM), com.hyperion.planning.HspDBConfigurator, ERROR, Error happened: Index: 0, Size: 0
    (Nov 21, 2010, 02:59:16 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
    com.hyperion.cis.config.ProcessingException
         at com.hyperion.planning.HspDBConfigurator.configure(HspDBConfigurator.java:209)
         at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDbConfigTask(RunAllTasksWizardAction.java:658)
         at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:202)
         at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
    (Nov 21, 2010, 03:03:06 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
    (Nov 21, 2010, 03:05:34 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
    (Nov 21, 2010, 03:19:29 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
    (Nov 21, 2010, 03:19:30 PM), com.hyperion.hfm.config.HfmDbConfigurator, ERROR, Error while configuring HFM DatabaseEntry does not exist for these parameters in tnsnames.ora file.
    (Nov 21, 2010, 03:19:30 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
    com.hyperion.cis.config.ProcessingException
         at com.hyperion.hfm.config.HfmDbConfigurator.configure(HfmDbConfigurator.java:151)
         at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDbConfigTask(RunAllTasksWizardAction.java:658)
         at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:202)
         at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
    (Nov 21, 2010, 03:19:39 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
    java.lang.NullPointerException
         at com.hyperion.hfm.config.HfmAppServerTaskProcessor.execute(HfmAppServerTaskProcessor.java:105)
         at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeCustomTask(RunAllTasksWizardAction.java:741)
         at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:188)
         at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
    if any one installed hyperion EPMS on windows server 2003 64 bit please i need your help
    thanks in advanced
    Edited by: eng3m on Nov 21, 2010 3:32 PM

    Hi,
    EDGE/Crystal Reports Server and Enterprise are no native 64bit applications. That does mean that they only run in 32bit mode. But you can install it on a 64bit hardware with a 64bit OS.
    Regards
    -Seb.

  • Add-on installation problem in Windows Server 2003

    Hi guys,
    I have a problem when i want to install my add-on in the Windows Server 2003. The server gives me error :
    Unable to load AddOnInstallAPI.dll
    and when i try install using the same installer at the client station, everything is ok.
    Does anybody have suggestion about that problem? I suspect the problem is the Windows' security that did not allowed me to load the .dll. Does anybody know how to set the security?
    Thanks you,
    Harianto Ng

    I've found an answer on the similar question here, on the forum, saying that Windows 2003 is not a supported SAPBO Client OS.
    In my experience I could not even set a reference to SAPbouicom.exe with a message "cannot load DLL"...
    Natalya

  • Unable to bind MacBook Pro (running 10.6 - Snow Leopard ) to Windows Server 2003 domain

    Hi there, I've been working on this problem for a few hours now (and a few hours last Thursday) and don't feel I'm getting anywhere, so I'm reaching out for help....
    My organisation has just purchased a new MacBook Pro, running Snow Leopard (OSX 10.6) and as a Technical Support Engineer I have been asked to configure it for an end user.
    I am currently trying to join it to our corporate domain, which is a Windows Server 2003 domain operating at the Windows Server 2003 Native domain functional level.
    The MacBook is configured to use DHCP, and has been assigned valid IP address, DNS servers etc by the DHCP server. It can resolve all names on our network, including the names of our domain controllers. When I use nslookup to resolve the name of the domain "my_domain.local" it returns a list of DC's on the domain, which would indicate to me that name resolution is working perfectly. It is using our primary DNS server, 'Ponus' to resolve these names - Ponus is also the Domain Controller in this site.
    To attempt to join the MacBook to the domain I have created a computer account for it on the domain, in the Computers container. I have gone into System/Library/Core Services and run the Directory Utility.
    In the directory Utility I have ticked Active Directory and clicked on it to edit. The 'Forest' field is greyed out and set to 'Automatic', in the 'Domain' field I have entered my_domain.local, which is the FQDN of my domain. I click Bind and when prompted enter my Domain Admin username and password (in the 'Create Computer Account in:' field it displays correctly as CN=Computers,DC=my_domain,DC=local.)
    When I click OK I get the message: Invalid domain. An invalid Domain and Forest combination was specified. You should enter a fully qualified DNS name for the domain and forest (e.g., ads.company.com).
    I have attempted writing the domain as my_domain.local, my_domain.local., MY_DOMAIN.LOCAL and MY_DOMAIN.LOCAL. but I get the same error each time. I have checked and rechecked DNS is resolving OK, and cannot see why it cannot find the Domain and Forest from the FQDN that I am entering. Even so I tried creating records in the hosts file on the MacBook to point to the main Domain Controller at this site (Ponus) but this didn't change anything.
    I have seen a few people report the same issue online but the responses tend to fizzle out before anyone gets to the bottom of it. I have seen some indication that people with an understore (_) in their domain name, or with a .local domain name may experience issues with joining Mac hosts, however these details are very vague and if true there must be a workaround.
    If anyone could help me with this I would greatly appreciate it, I'm running out of time to complete this work and have run out of things to try.
    I have an inkling that this is due to the Mac for some reason not reading the SRV records for the DCs and LDAP in DNS, or to do with the Mac looking only at one SRV record (ie. there is one for a new DC that we haven't deployed yet), not being able to reach this and giving up, but I'm clutching at straws really with my limited knowledge of the Macs process for joining the domain.
    Many many thanks,

    Hi there,
    A simple suggestion , please make sure both MacBook Pro clock and the server clock are the same meaning the hour/Min/ sec both should match. A least difference of 3 seconds is fine.
    I had faced this problem in many place and only solution was to match the time and it will bind immediatly.

Maybe you are looking for

  • Can you trace which Indesign files link to a specifik image?

    I have an image database, that multiple Indesign files link to. I am not the original author of the Indesign files nor the image database, so I have no overview of how many Indesign files links to each image. And now I have an image I would like to m

  • How do I set Firefox to automatically open documents after download is complete?

    Currently, the way it is is setup causes the attachment to download, then the downloads go to my download folder on my desktop. To open a downloaded document, I open that folder then click on the document. I seem to remember a time when clicking on t

  • CYRE- Movement type

    Hi I am assigning the MT to the BS items. While carry forwarding the balance from one year to another year, system is expecting MT for the retained earnings a/c. My questions are: 1 Whether I need to make CYRE relevant for MT and if so what type of b

  • Unwanted border around png picture

    I cutout unwanted content in a picture selecting a mask then saving for web as a png to show on a web background. But the picture shows a faint light coloured hairline border against a grey webpage background.  How can I get rid of this unwanted bord

  • Brush slowdown CS 5

    I have a custom built computer Windows 7 Ultimate / Core I7 3.2 / 12 Gig ram /  NVIDIA 8800 GTS graphics card. Up until about a week ago, I could work on a 100 mb plus files brushing on layer masks with no delay in rendering the brush strokes.Never a