RDS server Error in Conncting to Blazeds Data source in Flashbuilder 4

hi all,
I have a problem with my flash builder 4 with connecting to Blazeds data source
First i have installed Flash Builder 4 and Tomcat 6.0 and create projects , fine they work.Then i installed WTP plugin for eclipse since i need
to develop J2ee/Flex combined application it works with out data intigration fine ,but when i want to connect Blazeds data source then i use the tutorial
in following url :-
http://sujitreddyg.wordpress.com/2009/04/07/setting-up-blazeds/
but i dont success on it ,i followoed all steps in that tutorial but above error still occurs, According to tutorial i have put web.xml file and flex(which contains flex config files) folder to applications /WEB-INF folder and uncomment rds data section .
Could any one plese tell me where is the problem is , any help would be appriciated
Best regards,
Pradeep.

Hi Pradeep,
Can you please try the following:
1. Check if the server settings are pointing to the web application which has RDS configured
2. Make sure you restart the server once you uncomment the RDSDispatchServlet in web.xml
3. Make sure the BlazeDS version you are using BlazeDS 4.0 and above. If not, see if this article helps http://sujitreddyg.wordpress.com/2009/06/01/using-flash-builder-4-for-earlier-blazeds-buil ds/
4. Try sending a request to http://<server-name>:<port>/<WebApplicationContext>/CFIDE/main/ide.cfm from your browser. You should get an error saying "GET" method is not supported. If not, probably the RDSDispatchServlet is not properly configured.
Hope this helps.

Similar Messages

Alert subscription data source module encountered errors while running: Alert subscription data source module was unable to find alerts that match the subscription because of database errors.

Hi, We recently started getting these errors a couple times a day. There are 12 of them in total. We also have exactly 12 subscriptions. Does this indicate some db issue causing all of these
to fail?
Alert subscription data source module encountered errors while running: Alert subscription data source module was unable to find alerts that match the subscription because of database errors.
The following error(s) were encountered:
Exception Message: ExecuteScalar requires an open and available Connection. The connection's current state is closed.
One or more workflows were affected by this.
Workflow name: Subscription8b108a3e_4e3d_4fd0_b67e_cbfc21cd10b8
Instance name: Alert Notification Subscription Server
Instance ID: {E07E3FAB-53BC-BC14-1634-5A6E949F9230}
Management group: A Company Management Group
Thanks Lance

Hi,
Do you have hotfixes applied?
http://blogs.technet.com/kevinholman/archive/2009/01/27/which-hotfixes-should-i-apply.aspx
Also, I found a relevant thread for your reference.
Alert subscription data source module encountered errors while running</u1:p>
http://social.technet.microsoft.com/Forums/systemcenter/en-US/50557249-7f97-4b67-9729-f7088202385b/alert-subscription-data-source-module-encountered-errors-while-running?forum=operationsmanagergeneral</u1:p>
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Server error: "The attempt to read data from the server '(null)' failed"

Multiple times during each day my client (Mail.app) puts up a little exclamation mark "!" next to the mail account hosted on our Leopard Server. Clicking on this little alert icon pops up a message that reads:
+There may be a problem with the mail server or network. Verify the settings for account “Leopard Server Account” or try again.+
+The server returned the error: The attempt to read data from the server “(null)” failed.+
I can make the "!" go away by choosing Mailbox>Synchronize>Leopard Server Account. And everything seems peachy but it inevitably pops up again in another hour or two. It's annoying because I'm not sure if mail is getting through or not when the "!" is up.
Any ideas why this is happening?

MY SOLUTION REPOSTED FROM ANOTHER THREAD:
I've just solved a similar issue.
I have a dedicated server running Plesk 9.5 and when I upgraded to iLife 11 and Snow Leopard this error appeared. I could quickly click "get mail" and I'd get all my mail, but only 3-4 of my 9 mail accounts would connect. Theo others would have the error:
"The server error encountered was: The attempt to read data from the server..."
I found solutions for those using IMAP mail:
modify the /etc/courier-imap/imapd configuration file and change MAXDAEMONS from 40 to 80 and MAXPERIP from 4 to 40. This allows all the machines behind my home firewall to connect to multiple accounts on the e-mail server with mailbox caching enabled.
I'd made this change on my server but it didn't seem to have any effect. It dawned on me that I'm using POP, not IMAP. So I found in /etc/courier-imap/pop3d the same settings. I changed the MAXDAEMONS from 40 to 80 and MAXPERIP from 4 to 40 and voila, all my connections concurrently worked.
This has taken me more than two days to fix and I hope posting this helps someone else with the same issue.

Getting 401 error while creating a Report Data Source with MOSS 2010 Foundation

I have setup SQL Server 2008 R2 Reporting Services with SharePoint 2010 Foundation in SharePoint integrated mode. SharePoint Foundation is in machine 1 whereas SQL Server 2008 R2 and SSRS Report Server are in machine 2. While configuring Reporting
Services - Sharepoint integration, I have used Authentication Mode as "Windows Authentication" (I need to use Kerberos).
My objective is to setup a Data Connection Library, a Report Model Library, and a Reports Library so that I can upload a Report Data Source, some SMDLs, and a few Reports onto their respective libraries.
While creating the top level site, "Business Intelligence Center" was not available for template selection since SharePoint Foundation is being used. I therefore selected "Blank Site" as the template.
While creating a SharePoint Site under the top level site, for template selection I again had to select "Blank Site".
I then proceeded to create a library for the data connection. Towards this, I created a new document library and selected "Basic page" as the document template. I then went to Library Settings for this newly created library and clicked on
Advanced Settings. In the Advanced Settings page, for "Allow management of content types?" I selected "Yes". Then I clicked on "Add from existing content types" and selected "Report Data Source". I deleted the existing
"Document" content type for this library.
Now I wanted to created a Data Connection in the above Data Connection library. For this when I clicked on "New Document" under "Documents" of "Library Tools" and selected "Report Data Source", I got the error "The
request failed with HTTP status
401: Unauthorized.".
Can anybody tell me why I am getting this error?
Note: I have created the site and the library using SharePoint Admin account.

Hi,
Thank you for your detailed description. According to the description, I noticed that the report server was not part of the
SharePoint farm. Add the report server to the
SharePoint farm and see how it works.
To join a report server to a SharePoint farm, the report server must be installed on a computer that has an instance of a SharePoint product or technology. You can install the report server before or after installing the SharePoint product
or technology instance.
More information, see
http://msdn.microsoft.com/en-us/library/bb283190.aspx
Thanks.
Tracy Cai
TechNet Community Support

Error when creating a new Data Source

All, This is on BI Publisher 11g.
When I create a new data source and supply password and then click "Apply" button on top right corner, i get following error
Error 500--Internal Server Error
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.5.1 500 Internal Server Error
The server encountered an unexpected condition which prevented it from fulfilling the request.
what am i doing wrong?
Thank you for reading this post.
Thanks,
R

The schema/user is system and the password is alpha-numeric, upper/lower case, no special char ...
As a workaround I was able to add the password to the entry in the datasources.xml file and restarted BI Pub.
The JDBC is working ... I can test the connection successfully ... just wont save the entry
Edited by: tread on Oct 17, 2011 11:55 AM

Webi error as a Bex query data source

Hi All,
I am getting the below error When i try to access Bex query from Webi with OLAP connection as SSO, if it is predefined it works good, for predefined i used Service account for now.
com.businessobjects.sdk.core.server.CommunicationException$UnexpectedServerException: [[error.openSapBwBrowsingSessionFailed] 0] <<?xml version="1.0" encoding="UTF-8" standalone="yes"?><ConnectionString>
   <Properties>
      <Initial Catalog />
      <Language>en_US</Language>
      <Data Source>xyz</Data Source>
      <Cube Type>Unknown</Cube Type>
      <SaveLanguage>true</SaveLanguage>
      <Initial Cube />
      <TargetProvider>SAPNETWEAVER7X</TargetProvider>
      <NetworkLayer>SAPBW_BICS</NetworkLayer>
      <Authentication Mode>2</Authentication Mode>
   </Properties>
   <ExtendedProperties>
      <JCO_ASHOST>xyz</JCO_ASHOST>
      <SapLoginMode>0</SapLoginMode>
      <JCO_R3NAME>bd1</JCO_R3NAME>
      <JCO_CLIENT>300</JCO_CLIENT>
      <JCO_SYSNR>30</JCO_SYSNR>
      <JCO_LANG>EN</JCO_LANG>
   </ExtendedProperties>
</ConnectionString>>
I did configured STS and SAP Authentication tab on CMC.
Please advise
Thank you!!!
kris

Hi Satish,
we did generated keystore and certificate , as said predefined connection works, but SSO option running into error.
we successfully configured AD SSO Kerberos , once we configure SNC, will do testing again and let you know. STS configuration steps also done.
Thanks,
Kris

"logon failed" error when connecting to XML data source

I have an HTTP source that generates XML. I have a schema that describes this XML. If I save the XML to a local file it works fine as a data source with the schema. However, when I try to access the same data via HTTP, I get the following error:
Logon failed.
Details: Cannot open file
Server returned HTTP response code: 401 for URL: http://localhost:8004/report.xqy?Validate%20XML=0&Use%20WS-Security%20Config%20File=&WS-Security%20File%20Location
However, if I enter that URL in a browser it works fine. And even if I disable security on the HTTP source, it produces the same error.
I have tried a local HTTP source as well as the same source running on Amazon EC2.
Any ideas?

Thanks for the help.
I am new to crystal reports, so I do not understand your suggestion. Both of those points look like they are related to Adobe Flash.
I am trying to create a report using the standard report creation wizard:
1) new, standard report
2) create new connection
3) xml and web services
4) xml data source
When using the sample from the SAP site, it works fine:
http://resources.businessobjects.com/support/downloads/samples/cr/customer_db/customer.xml
When connecting to my source from a browser, it works fine. When using my source as a local document instead of over http it works fine. It is only when connecting to my source over http that I get the failed logon error.
Kelly

Error in Creation of BW data source

Hi All,
While creating a data source, i am selecting the Origin type Business ware house cube & in the RFC destination field i can able to select the BW syste. The problem is when i go to the next filed BW report and try to get the relevant BW report from F4 the system shows a log error as "System error in System" Message no. CRM_MKTTG_DS_MISC033.
In second case
I have taken an existing BW Data source and tried to recreate it manually filling all the fields with existing data source, RFC destination, BW report, Business partner and Function module.
In this case the system doesnu2019t throws any error, it is working fine if I create manually.
I am in a dilema why the system behaving like this. could you please throw some light on this issue.
Thanks in advance,
Vijay.

Hi,
See the link.
http://help.sap.com/saphelp_crm50/helpdata/en/00/dc54384ac9a81be10000009b38f8cf/frameset.htm
regards
Srinu

Error While Creating The Generic Data Source.

Hi Gurus,
I am trying to create a Generic Data Source (ZGG_TEST) on a View (ZV_TEST1)
View as Follows:
Table1 has the Following Fields
Field Type
MANDT CLNT
RECNO NUMC
STATUS CHAR
LMODF CHAR
Table2 has Fields
Fields Type
MANDT CLNT
RECNO NUMC
PHCOS QUAN
MATNR CHAR
EQSFS QUAN
MEINS UNIT
In Table2 under Currency and Quantity Field tab
For Field PHCOS The Reference table is MSEG and Reference Field is MEINS
For Field EQSFS the Reference Table is MSEG and reference field is MEINS
View Description
Tables:
Table1
Table2
MSEG
Join condition For the View is
TABLE2-MANDT=TABLE1-MANDT
TABLE2-RECNO=TABLE1-RECNO
TABLE2-MANDT=MSEG-MANDT
TABLE2-MATNR=MSEG-MATNR
The Problem is While saving the Data Source it is Giving an Error as Follows
Invalid extract structure template ZV_TEST1 of DataSource zgg_test
Message no. R8359
Diagnosis
You tried to generate an extract structure with the template structure zgg_test. This operation failed, because the template structure quantity fields or currency fields, for example, field PHCOS refer to a different table.
Procedure
Use the template structure to create a view or DDIC structure that does not contain the inadmissible fields.
Please help me In Solving this Issue
Thanks in advance
Santosh

n Table2 under Currency and Quantity Field tab
For Field PHCOS The change Reference table to TABLE2 For Field EQSFS the change the Reference Table to TABLE2
ref field MEINS ...
This works ..
Priya
Edited by: Priya on Dec 31, 2007 1:30 PM

Error when activating Real Time Data Source

Hi..
I created a generic datasource in R/3 system via RSO2, with the Real-time check box enabled in the settings for Generic Delta. I saved the datasource. Replicated it into BW System.
I tried to activate this Real time Data Source in BW, it says "Error when activating Data Source".
I am on BI 7.0, with PI_BASIS: 2005_1_700.
Please let me know if you need any further information.
Thanks,
Sai.

Hi sai,
Can you specify from where you have created your geneic data source like by using DB tabl/view/infoset query.
am

Error while reporting on Excel Data source

Hello OBIEE Experts,
I have created a rpd based on excel datasheet.
Record counts are updated and when I try to retrieve records on Physical layer, sometimes I can view records and sometimes the following error message is displayed:
[nQSError: 16001] ODBC error state: S0002 code: - 1305 message: [Microsoft][ODBC Excel Driver] The Microsoft Jet database engine could not find the object 'Hospital'. Make sure the object exists and that you spell its name and patha name correctly..
[nQSError: 16002] Cannot obtain nuber of columns for the query result
While creating the report on BI Answers getting the below error:
View Display Error
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 16001] ODBC error state: S0002 code: -1305 message: [Microsoft][ODBC Excel Driver] The Microsoft Jet database engine could not find the object 'Sales'. Make sure the object exists and that you spell its name and the path name correctly.. [nQSError: 16002] Cannot obtain number of columns for the query result. (HY000)
SQL Issued: SELECT Sales.Site saw_0, Sales."Pt# Identifier" saw_1, Sales."Q1 Charges" saw_2 FROM HosNew ORDER BY saw_0, saw_1, saw_2
Here, HosNew is the subject area name. I don't have any password for Administrator user. The Password is <blank>. Connection pool uses Call interface: ODBC 3.5
Please help in solving this.
Thanks.

hi,
Try replicating the data source again.
After that go to RSDS x-action there give the data source name and source system name and do restore and activations from there .
After check if you were able to create x-fer rules first.
Thanks
Mukesh

Error while generating material classification data source in R/3

Hi,
I am trying to generate the data source for material classification in R/3.
I have created the data source entry in CTBW and added the classification fields required for the data source. But while generating the data source i am getting an error, which says "BW Metadata is incomplete".
Is there any step, that i have missed? Please advise what needs to be done.
Thanks,
Manoj

Hi Santhosh,
The note seems to be quite old and may not be applicable since we are on the latest support pack.
We are using two different clients, one for configuration and the other for test data.
Thanks,
Manoj

Error when deploying JDBC file data source for J2EE agent in weblogic

Hi ODI experts!
we're using ODI 11g and we've installed J2EE agents on weblogic. We need to configure a connection pool within weblogic for a file data source. Thus, we've added snpsFile.jar (that was shipped with ODI 10g...) to the weblogic config so that we can configure a JDBC connection to file.
As we validate the config, an error occurs (see below):
Obviously, driver is found but cannot be deployed.
####<4 août 2011 09 h 39 CEST> <Error> <Deployer> <ppdlodi001> <SRVPPDODI_001> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <c53bfd6260db74bb:-485a441a:13193b42397:-7ffc-0000000000000027> <1312443551325> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1312443550020' for task 'weblogic.deploy.configChangeTask.6'. Error is: 'weblogic.application.ModuleException: '
weblogic.application.ModuleException:
at weblogic.jdbc.module.JDBCModule.prepare(JDBCModule.java:290)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:508)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:149)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:47)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:1223)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:367)
at weblogic.application.internal.SingleModuleDeployment.prepare(SingleModuleDeployment.java:43)
at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:208)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:98)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:749)
at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1216)
at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:218)
at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:160)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:171)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.prepare(DeploymentReceiverCallbackDeliverer.java:41)
at weblogic.deploy.service.internal.statemachines.targetserver.AwaitingContextUpdateCompletion.callDeploymentReceivers(AwaitingContextUpdateCompletion.java:164)
at weblogic.deploy.service.internal.statemachines.targetserver.AwaitingContextUpdateCompletion.handleContextUpdateSuccess(AwaitingContextUpdateCompletion.java:66)
at weblogic.deploy.service.internal.statemachines.targetserver.AwaitingContextUpdateCompletion.contextUpdated(AwaitingContextUpdateCompletion.java:32)
at weblogic.deploy.service.internal.targetserver.TargetDeploymentService.notifyContextUpdated(TargetDeploymentService.java:225)
at weblogic.deploy.service.internal.DeploymentService$1.run(DeploymentService.java:190)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: weblogic.common.ResourceException: com.sunopsis.jdbc.driver.file.a.i
at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:263)
at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1193)
at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1117)
at weblogic.common.resourcepool.ResourcePoolImpl.start(ResourcePoolImpl.java:244)
at weblogic.jdbc.common.internal.ConnectionPool.doStart(ConnectionPool.java:1110)
at weblogic.jdbc.common.internal.ConnectionPool.start(ConnectionPool.java:147)
at weblogic.jdbc.common.internal.ConnectionPoolManager.createAndStartPool(ConnectionPoolManager.java:386)
at weblogic.jdbc.common.internal.ConnectionPoolManager.createAndStartPool(ConnectionPoolManager.java:326)
at weblogic.jdbc.module.JDBCModule.prepare(JDBCModule.java:254)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:508)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:149)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:47)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:1223)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:367)
at weblogic.application.internal.SingleModuleDeployment.prepare(SingleModuleDeployment.java:43)
at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:208)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:98)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:749)
at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1216)
at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:218)
at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:160)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:171)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.prepare(DeploymentReceiverCallbackDeliverer.java:41)
at weblogic.deploy.service.internal.statemachines.targetserver.AwaitingContextUpdateCompletion.callDeploymentReceivers(AwaitingContextUpdateCompletion.java:164)
at weblogic.deploy.service.internal.statemachines.targetserver.AwaitingContextUpdateCompletion.handleContextUpdateSuccess(AwaitingContextUpdateCompletion.java:66)
at weblogic.deploy.service.internal.statemachines.targetserver.AwaitingContextUpdateCompletion.contextUpdated(AwaitingContextUpdateCompletion.java:32)
at weblogic.deploy.service.internal.targetserver.TargetDeploymentService.notifyContextUpdated(TargetDeploymentService.java:225)
at weblogic.deploy.service.internal.DeploymentService$1.run(DeploymentService.java:190)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Thanks in advance for your help.
Fredd.

Hi!
Some information: I found this website [http://gerardnico.com/doc/odi/webhelp/en/refmanual/connexion/jdbcdriversample.htm] explaining that the 'old' snpsFile.jar driver was deprecated and that a new one was existing... but I can't find it anywhere!
My questions are:
- Can the problem (original problem. See initial post) be due to driver version?
- Does someone know where to find this 'new' driver?
Thanks for your help.
Fredd.
Edited by: fredd2 on Aug 5, 2011 10:04 AM
Edited by: fredd2 on Aug 5, 2011 10:07 AM

Short Dump Error when we check the Data Source in RSA3

Hi. Experts.
                   We are using Data Source 2Lis_13_VDITM and when we try to check in RSA3
for recorts it is going short dump. I am just providing the error information.
              An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_IMPORT_MISMATCH_ERROR', was
not caught in procedure "MCEX_BW_LO_API" "(FUNCTION)", nor was it propagated by a RAISING
clause.
               Since the caller of the procedure could not have anticipated that the exception would occur, the current program is terminated.
The reason for the exception is:
When importing the object "MC13VD0ITM_TAB", the component no. 96 in the dataset has a different type from the corresponding component of the target object in the program "SAPLMCEX".
                    The data type is "N" in the dataset, but "X" in the program.
        Since I don't have much knowledge in ABAP, Please help me out regarding this issue. Suggest me possible solution and let me know if you need any further information.

Hi,
Try adding a TRY CATCH block in the extractor function module to catch the exception.
For the type mismatch you will have to make sure the variables are of same type or they can be type converted.
Use the debug mode of RSA3 to find what data is being exchanged.
You will need to change your extractor to avoid the dump.. or ensure that the value being passed to that object is correctly being passed(correct format)
Cheers
Kiran

SQL Server 2012 SSAS and Teradata as data source

Hi,
I have SSAS multidimensional project which is using Teradata as a data source with OLEDB provider for Teradata.
The data source Test connection is successful using the specific username and password, not using the Windows NT integrated security option.
Exploring data is also fine when the specifi
When processing the cube the username/password is not recognized.
In the Impersonation Information i'm using the same username/password with the option use a specific Windows username and password.
Ther Teradata authentication is not connected with Windows domain users.
What is the way to deploy/process the cube in this scenario?
Thanks in advance for your answer.

Do you have the same providers installed on both the client and the server?
When you click "Test" or explore the data BIDS will use the provider on your client machine. However when the server processes the data it has to use the provider installed on the server itself.
http://darren.gosbell.com - please mark correct answers

RDS server Error in Conncting to Blazeds Data source in Flashbuilder 4

Similar Messages

Maybe you are looking for