RDS version management for SCM-DP and SNP

Hi,
I'm having difficulties to find which version of RDS-DPA (SCM-DP/SNP) is downwards compatible with a client on ECC6-EHP5. The current V3.703 version requires ECC6-EHP6 or higher. Is there a way to find this information?
Many thanks,
Patrick

Dear Rohit,
Usually when you enter anything in the second row, it will mean that you want to display certain intervals in a lower time granularity. In your case you are diaplaying a total horizon of 133 weeks. Do you intend to display any of those weeks in days?
Once you enter the values in the first line, you can press the "Enter" key. This should activate the second line. Then you can enter the desired values.
Regards,
Kedar

Similar Messages

  • Looking to explo up SCM - TM  for exisiting SCM DP and SNP setup

    Hi
    we are looking to explore the transportation management module to add value to exisiting ECC-PM (Fleet) operations.
    currently we have SCM- DP and SNP in use.
    please suggest ideas / experiences.

    Fred
    Check OSS notes for this error. The BOP compponent has a steady stream of corrections developed by SAP especially in older releases.
    Also make sure your Livecache Build is consistent with SCM Release/ Patch level.
    Rishi Menon

  • Version management for Purchase order

    Dear Friends,
    I am implimenting version management for Purchase orders.
    Under version management(IMG) ,set up change dispalys node--
    following fields are available.
    Ex:
    Doc type-- ZCO,NB
    For item view fields:
    Field nameEMATN(material),TableMEPO1211--material field in Item over view
    Field nameMENGE(Quantity),TableMEPO1211
    For Header level fields:
    Field nameZTERM(payment terms field),,TableMEPO1226
    Category--A or B for selection of change documents
    No out put--if i tick it concern field will not included in change doc
    Version--what is the purpose
    Please suggest me
    1) we need enter the all the field names in the item over view and item details and Header level fields as given above ,is it correct.
    2) And with regard to Table, do i enter for Header level fields-EKKO or  MEPO1226 which is available in F1 under techinical information,
    for item level fields,shall i enter table name-EKPO or MEPO1211as dispalyed in the F1 under techinical information.
    3) I need to enter all the fields existing in the purchase order
    4) All these fields and data is to be entered for every document type NB and ZCO.
    5) After changes are made in Purchase order,first time on saving the PO,version is creating automatically,
    second time,if we do changes, version is not creating on saving the purchase order,what configuration needs to be done.
    Please suggest.
    Regards,
    Magana

    Also tell me the use of *Display of change documents in PO*.
    It will display changes made both in item & header.It will help you to audit all changes made in p.o after it is raised.
    In version management not all changes can be ameneded as seperate versions
    only critical changes like price revision,quantity revision.

  • Version Management for PO Fields

    Hi,
    Curently System is capturing the Version
    Management for PO with Fields, Incoterms, Total Net Order Value, Value Changes, Currency, Deletion indicator in purchasing document & Purchase order quantity.
    But the Requirement is to capture(display) only the Incoterms, Deletion indicator in purchasing document & Purchase order quantity.
    How to filter the other PO Fields in Version Management-  Total Net Order Value, Value Changes & Currency.

    Thank for ur smart reply...
    Here the Requirement is in Purchase Order to capture(display) only the Incoterms, Deletion indicator in purchasing document & Purchase order quantity.
    And to filter the other PO Fields in Version Management- Total Net Order Value, Value Changes & Currency.
    But you had given the suggestion for PR. psl guide me how to do this process for PO process.

  • Version management for external purchasing

    Hi.
    We activated the version management for scheduling agreement. But the problem is when we save the document it took the netpr ( Value) Zero. and also when we create new version i.e ammedment of price the it create one new version with zero value,
    Can any budy suggest me why it took the zero value?
    Thanks
    Prashant

    Got it

  • Version Management for SD

    Hello All,
    I need to maintain Version Management for SD. My client's requirement is whenever they change Quotation or Sales order they get version number.
    E.G
    Quotation Created -
    > 10
    Change Quotation -
    > 10.1
    Change quotation again -
    > 10.2
    just to remember the purpose of changing Quotation . Is it possible to do in SAP SD.
    Regards
    SD1000

    Query 1. Working with quotation version
    Generally, version for sales order is used for SAP Mill Products.
    So to have that functionality for your quotation.
    Configuration
    - Copy Standard sales doc type for VSH1 for sales version doc to create  version doc for Quote, say, ZVQT.
    - and all coresponding configuration which is requiored for introducing a new sales doc like allowing sales doc for desired sales area, number range, Item catergory determination similar to that of Quotation item category determination, pricing, copying control from QT to ZVQT and vice versa.
    - Configure Sales Order Versions
    To do this follow following path in SPRO
    IMG - SD - Sales - Sales Doc - Sales Order Version - Configure Sales Order Versions
    Here, you assign Sales Doc QT to the version sales Doc ZVQT
    Process
    1. In sales order (VA02), in menubar go to Edit - Additional Functions - Version Data - Transfer
    2. This will create a new document for ZVQT as a new version with reference to our original Quotation (QT) with item data.
    3. We can make changes in our version document (ZVQT).
    4. Once we confirm the changes, we can copy the version to our original Quotation.
    5. Further multiple verisions of the quotation can be created and compare the same.
    Query 2.  Bill of Material - LUMF
    I hope your item cat determination for LUMK is
    Sales Order
    - Item Cat Group
    - Higher Item Cat
    - Def Item Cat
    OR
    LUMF
    TAP
    OR
    LUMF
    TAP
    TAN
    So, if you are using TAP as higher Item Cat.
    Then you need not worry on pricing at the higher level,
    As, Item Cat TAP is not relevant for pricing.
    Thus, that item has Statistical relevance.
    Regards
    JP

  • Version Management for Scheduling Agreement

    Hi Experts,
    We have activated Version Management for Scheduling Agreement - LP. When we create a Scheduling Agreement, it is generating zero version but 'Net Order Value' is showing as zero in versions tab. We have also addressed fields 'NETPR' and 'NETWR' for document type - LP, in Set up Change displays.
    Can any one please suggest a solution for this.
    Thanks in advance.
    Regards,
    Sree

    Hi Experts,
    Any advise on this isuue?
    Regards,
    Sree

  • Version management for POs

    Dear friends,
    Iam implimenting Version management for purchase orders.I have got doubts like;
    1)---In IMG side ,under setup change displays node, we need to enter all the field names of purchase order document type wise, ..i.e.
    we have got three doc.types of POs,NB,ZCP,ZCO,then Header and item details fields of PO shall be entered against each doc.type in this node.
    like -NB-EKPO---MATNR
    NB-EKKO-field
    We need to enter tables as EKKO and EKPO and
    all the fileds are to be entered for all the doc.types.
    we need to enter all the fields including header fields and item fields ,
    2)----For header fields,if i change the data,version is not creating,
    3)--At item details ,after release of the PO,if i change the data,if i save the document,it is saving without automatically closing the version.We need to manually close the version.
    I have given error category E for application MEDCM for 14,19,22,eventhough system is not giving error.
    Atleast provision should be there to give error if user doesnot close the version manually.
    Please suggest for my doubts.
    Regards,
    Magana

    Hi
    For a combination of purchasing organization, document category, and document type, you can:
    <b>Activate version management</b>
    If version management is active, changes to a purchasing document are managed in versions.
    <b>Define field selection for versions</b>
    You can specify the attributes certain fields of the version are to have: mandatory entry, optional entry, display only, field suppressed.
    Set the message ststus as follows
    MEDCM     014     Purchasing document &, version & in process     W
    MEDCM     019     Purchasing document &, version 0, still in process     E
    MEDCM     021     Not all version-relevant changes were cancelled (&1)     W
    MEDCM     023     No unprocessed message exists                         W
    System will  allow  to manually close the version .Version 0 will be set automatically .After that system will allow to manually close the version.
    I dont think you will face probelm.
    Regards
    Sunny

  • Version Management for BW queries?

    Hi,
    Is version management available for queries in BW?
    Like an ABAP program, different versions can be generated, allowing an older version to be retrieved and overwrites current version, for the case where heavy changes applied but has to be reverted.  And also the function of comparing versions to easily identifying the differences.
    Thanks.

    There is no version management for queries built into BW. Of course, you can generate new versions of queries each time you change them by doing a "Save As...", but we have found that this is counterproductive for several reasons, including:
    1) Extra Query Maintenance - Leads to multiple copies of a query, and eventually confusion over which one(s) are supposed to be used and which one(s) are "obsolete".
    2) User Favorites Maintenance - Any favorites that have been created by users will have to be recreated from scratch using the new query and/or workbook.
    There are probably others...
    Anyway, #2 is the one that finally convinced us to stop creating new versions of queries. Instead, we do considerable testing of any changes on our Dev and QA systems before finally replacing the Prod copy of the query. Of course, "backing out" changes is still a pain this way, but at least you have the original query on Prod to go by. For really major changes, we will also generate "Before" and "After" XLS files with results, both to prove that we are getting the expected results and to serve as a way to go back if the Prod query has been updated before a problem is discovered.
    Hope this helps...
    Bob

  • Benifits of Version Management for PO

    Hi All,
    Pls suggest some of the business benifits i can achieve after implementing Version Management for Purchase Orders.
    Appreciate if the answers are logical and upto the point.
    And also what change it will bring after implementing it.
    (i dnt expect ans like it helps in maintaing the revision levels of the purchasing doc et al..)
    Pls try to stick to the answers from Business Point of View.
    Thanks in advance
    Regards,

    Hi,
    Maintaining version management for PO will help the users to keep a Track of :
    1. Changes Made in PO after Final Release
    2. Quantity / Value Changes Made to the PO
    3.  Line Item Addition / Deletion in PO after Release
    For more info, please check with the following link :
    [http://forums.sdn.sap.com/thread.jspa?threadID=431878]
    Hope it helps,
    Best regards
    Amit Bakshi

  • Setup version management for PR

    Hello Gurus,
    I have setup the version management for PR once save the PR again in change mode I have done some changes like price and quanity after that I have checked but versions are not updated what could be the reasion?
    still it is showing the version 0 only it suppose to get update as and when any changes taken place like version 1,2,3 and so on but this is not happning in my case.
    thanks in advance.
    regards
    sapmm

    hello,
    In my company there is no release strategy for PR so in this case what I have to do?
    for PR also as and when any changes takes place automatically version should get update
    or other wise to configure the message as a error for version management actually there are no messages concerned to version management in this case what i have to do.
    pls help me.

  • I have a CC student membership for one year, but I can only download trial versions of for example illustrator and indesign (30 days). How do I solve this problem?

    I have a CC student membership for one year, but I can only download trial versions of for example illustrator and indesign (30 days). How do I solve this problem?

    If there is no billing issue,
    Creative Cloud applications unexpectedly revert to trial mode | CS6, CCM
    If you use Photoshop at all, you may need to install the latest update to resolve this issue. See this blog post for more information:
    http://blogs.adobe.com/crawlspace/2013/01/photoshop-13-0-413-1-2-updat es-now-available.html
    If you do not have Photoshop, then try the solution that others have mentioned previously:
    Open the Adobe Application Manager (AAM).
    If applicable, let AAM complete any automatic updates and restart itself.
    Sign in with your Adobe ID. (Optionally, you can close AAM at this point.)
    Open a CS6 application (e.g. InDesign CC).
    If prompted (e.g. you get the trial screen), click "License This Software" and sign in with your Adobe ID.
    Refer to: Re: Top Ten Questions About Creative Cloud
    creative cloud software says my free trial has expired, but I have a paid subscription
    Regards
    Rajshree

  • What are the versions required for JBOSS,JDK and ORACLE to setup the ATG 10.2.

    Hi Folks,
    Could you please share, What are the versions required for JBOSS, JDK and ORACLE to setup the ATG 10.2.
    Thank you.

    In case you don't have access to MOS :
    JBOSS : 5.1.2 EAP
    JDK : 1.6.0_38
    ORACLE :
    Oracle Exadata5
    Oracle 10gR2 (10.2.0.3)
    Oracle 10gR2 RAC (10.2.0.3)
    Oracle 11gR2 (11.2.0.2.0)
    Oracle 11gR2 RAC (11.2.0.2.0)

  • Latest version available for Oracle Forms and Reports in 11g AS

    Deaer Friends,
    Please let me know latest version available for Oracle Forms and Reports in 11g Application Server and let me know whether it is supported in Windows - 64 Bit Platform
    Regards,
    DB

    DB,
    Oracle Forms and Reports 11g Release 2 (11.1.2) is the most recent forms and reports.
    If you're on 11.1.1.x (for example 11.1.1.5 or 11.1.1.4), please refer to http://docs.oracle.com/cd/E24269_01/doc.11120/e23975/upgrade_from_r1.htm for upgrade procedure.
    Otherwise, if you're installing it brand new, download Oracle Forms and Reports 11gR2 (11.1.2.0.0 from http://www.oracle.com/technetwork/developer-tools/forms/downloads/index.html
    HTH,
    Raj Mareddi
    http://www.freeoraclehelp.com

  • Is there is any way to find the data transfer from client to Configuration Manager for health monitoring and hardware Inventory

    Hi
    Can Configuration Manager provide a way to find the data transfer from client to Configuration Manager for health monitoring and hardware Inventory. How can I know what amount of data is consumed during that process

    Place archive_reports.sms in %systemroot%\ccm\inventory\temp\ for both 64-bit and 32-bit computers.
    There are two situations where you can use this depending on the type of client:
    1. To keep inventory reports on a client (that is not an MP), create the following file:
    %systemroot%\ccm\inventory\temp\archive_reports.sms
    2. To keep inventory reports on a MP (that is also a client), create the following file:
    <x>:\sms_ccm\inventory\temp\archive_reports.sms
    The XML file will be saved in the inventory\temp folder.
    More information on the above here: http://blogs.technet.com/b/configurationmgr/archive/2012/09/17/controlling-configuration-manager-2012-using-hidden-files.aspx

Maybe you are looking for