Re 1000 slow to switch connection ?????

So actually the extender works . But it takes about 15 seconds to maybe 60 seconds to switch from the normal router to the RE 1000 and so on. And sometimes it doesn't seem to switch at all???
So it's not really handy like this. It happens with all the machines but mostly with the android phones....
Is there something I can configure to make it switch instantly???

eezdva wrote:
Yeah it's slow when connecting wirelessly.
Like I'm on a boat. And when I move from one room to the other it sometimes takes on minute to go from my normal router (Thomson tw 850) to the re 1000. I have a normal windows 8 and a windows 7 laptop and 2 android phones.
You mean the wireless network name of the regular router is not the same with the RE1000? They should be the same. By the way, how far is the RE1000 from the router?
How about using the following method:
Configuring the Linksys RE1000 with a gateway using Site Survey

Similar Messages

Dreamweaver very slow when lose connection to intranet

When not connected or lose connection while intranet
documents are open,
id still like to be able to work in dreamweaver yet it is so
slow like it is trying to find the intranet every second.
At least it wont give a popup for every open file like
Dreamweaver mx2004. but it still runs very slow, like switching to
another application and then switching back to Dreamweaver8, the
document open becomes active after 20seconds so have to wait.
Intuitively at least for me, it would be nice if it only
bothered you when u tried to save the document, a message would
popup saying ' Orig document path could not be found'. I would stop
whatever background process is running slowing down dreamweaver.
Anyway to turn off whatever process this is?

Hi Murray, the RAM comments were irrelevant, pointless. 32GB RAM vs 4GB RAM? Sorry, I worked at Microsoft and as a systems integrataion consultant for a number of years. 32bit programmes don't access RAM the same as 64bit, but, having 32gb with a 64Bit OS means RAM usage for a 32bit programme is better managed. Programmes and data files are on seperate drives. My data files kept are on 3 disk stripe sets.
The CSS files and the HTML file are on the same drive. AS an example of performance for data read/writes, I also use Photoshop CS6 to edit images in excess of 2gb in size containg multiple smart object, and I dont experience this type perormance lag.
In this case, RAM is mainly irrlevent because the file are small, approx 200kb total combined size. I mentioned RAM in my initial post because any time I've had problems with Adobe products before, I've always been asked how much RAM I have.
So, can we please drop RAM, and perhaps focus on the problem....
Dreamweaver, regardless of what background processes I have running, regardless of how much RAM I have, regardless of where the files are kept, has a significant performance hit when editing an HTML file with links to multiple CSS files.

Design help related to ACE to Switch connectivity using Port-Channel

Hi,
I have a Cisco ACE 4710 configured in One-Arm mode. This ACE is getting connected with 2 3750 switches. These 2 3750 switches connected in trunk mode.
ACE is connected to these 3750 switches using Port-channel.
ACE Config:
================================
interface gigabitEthernet 1/1
description One-arm mode port to DMZ Switch 1 port 20
channel-group 1
no shutdown
interface gigabitEthernet 1/2
description One-arm mode port to DMZ Switch 2 port 20
channel-group 1
no shutdown
interface port-channel 1
switchport access vlan 51
port-channel load-balance src-dst-ip
no shutdown
interface vlan 51
ip address 10.40.56.131 255.255.255.128
access-group input everyone
access-group output everyone
nat-pool 1 10.40.56.215 10.40.56.215 netmask 255.255.255.255 pat
service-policy input LB
service-policy input remote-access
no shutdown
===========================================================
The problem is that 3750 switches are not stacked.
Application is working fine. But i am getting a lot of MAC flapping messages..
kindly suggest whether this design is OK or something needs to be done to rectify it...
Attached a small diagram..

Hello acharyr123,
I don't think this design is ok, and it would cause mac flapping since the two indepedendent 3750 switches will learn the ace mac addresses off of two different interfaces. The 3750s would have to be stacked so that they would act as one switch then this should work correctly.
Thanks
Joel Lamousnery
TAC CSE

Switch to Switch Connection

Hi, for one project we are using HP 1910-24G-PoE (170W) Switch (JE008A) switch. There are total six nos. of switches at different floors, out of these six switches one switch is located in main server room.
My first question is can we use SFP port available on each of five switches & connect it to one fiber patch panel through different LIU's ?
Sencond question is can we covert these into cat6 (RJ45) again & connect it to 6th switch located in main server room?
Thanks.

Hi Shashikant,
I given few thought what could be issue and following are few of the guess
Switch to Switch should be connected with cross cable -- It is connected
Both the ports should have same speed and duplex setting -- It is shared and OK
Possible Layer-2 loop - Needs to verify for both switches- Need topology view (if these switches are connected to any other networking devices)
Output of show cdp nei
Output of show spanning-tree
Output of show vtp status
Shutdown interface and then no shut the interface. Check the logging message on both the switches.
With this certainly you would be in position to identify the close the problem.
With regards,
Shailesh

IPad slow in re-connecting to a known WiFi network

Hi all,
I have noticed that my iPad is sometimes slow in re-connecting to a known wi-fi network (my home network).
I have been doing some online research and it seems like it's an issue apple acknowledged.
Normally it connects right away, other times it takes about 4-5 seconds.
In rare occasions it takes up to a minute...
Is this normal?
Message was edited by: renzopanta

The only times mine does not instant connect is when it has been away from the network for a period of time...and then it seems like only a second or two. Safari opens immediately but mail can take several seconds to figure out the connection. If I stay within the router signal, and sleep the iPad, when it wakes it is on the network with no delay.
Hope this helps.

Ios7 Update Problems on iPad 3 - My iPad is not going to black screen after not being touched. Also, am I crazy; I can't find timing adjustment to go to black. Finally, iPad slow to switch between some catgagories in control panel

O.K. I found 3 issues on my iPad 3 after ios update:
1. iPad does not go to black after non-use
2. iPad is slow to switch between some catagories in control panel
3. Speaking of control panel; have I lost my mind? I can't find time adjustment responsible for iPad going to black.

Outside of the contact number for that you've already used I don't know another way of direct contact. Here are some things that they may or may not of had you try that might help you. If you will go to the settings app and pick general on the right-hand side you will see accessibility. Within that you can adjust a text size make the text bowl you can also increase the contrast. You can also adjust the brightness and control panel.
As for Siri again in the settings app under general you should see Siri on the right-hand side with the switch to turn it on. If that is turned on and you're still having issues
Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/

Disable portfast on switch-to-switch connection

Hi,
From http://www.cisco.com/en/US/customer/tech/tk389/tk621/technologies_configuration_example09186a008009467c.shtml, it says, "do not use portfast when you have switch-to-switch connection. In this case, the command can result in a loop."
For e.g. when someone connects a switch port(with portfast enabled) to another switch port(with portfast enabled)
1) can this scenario cause a loop even though the connection between these switch is only a single link?
2) If it does not cause a loop, what will happen? STP recalculation which causes a short network outage?
Thanks.
Christina

Hi Christina,
1) Only if there is a redundant physical path between the switches, such as through another switch. If the only physical path between the two switches is the switch-to-switch link in question, then no loop can occur.
2) Portfast simply ignores the standard STP state transitions and immediately enters the forwarding state, so assuming no loop, a switch-to-switch link that has portfast configured will skip the 50 second STP convergence time and immediately forward traffic.
HTH,
Bobby
*Please rate helpful posts.

Macbook running slow when not connected to charger

My Macbook Pro 13" is running slow when not connected to energy.
Does anyone know why is that happening, how can I fix it?
Thank you very much.
if you have any idea.
Att
Raissa
<Email Edited By Host>

Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

G5 dual/1.8GHZ slow when switching users and starting mail, opening files

I have 20' imac dual cpu G5/1.8ghz/1gig/250gig drive with 10.4.11.
It is much slower than the G5 it replaced. Symptoms include: very slow when switching to another user desk tops, opening up the hard drive for the first time once you get there, opening entourage or mail for the first time; lots of beach balls.
The drive has more than half the space left, we don't have many applications running, our iphoto and itunes libraries are under 20 gig combined. I ran the disk utility and cleaned up permissions. We typically leave the mac on all the time but restart occasionally.
Any ideas?

We'll let you in because you used to have a G5 iMac , but you really should post on the dual page. Anyway, have you cleaned your caches in the browser you use? You can use OnyX to clean all the caches. Make sure you empty the trash in all your user accounts as well. Try resetting the PRAM too.
Hope some of this helps,

Seeking to fix this error: "Failed while adding virtual Ethernet switch connections."

I am getting the error below when trying ot make modifications to my Hyper-V.
I am trying to add a new Virtual Adaptor.
Hoping someone may have a suggestion on how to fix this.
Error:
New-VMSwitch : Failed while adding virtual Ethernet switch connections.
Failed to connect Ethernet switch port (switch name = 'XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX', port name =
'XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX', adapter GUID = '{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}'): The system cannot
find the file specified. (0x80070002).
The operation failed because the file was not found.
At line:1 char:1
+ New-VMSwitch -Name "LAN1" -NetAdapterName "Ethernet" -AllowManagementOS $True
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (Microsoft.HyperV.PowerShell.VMTask:VMTask) [New-VMSwitch], Virtualizati
onOperationFailedException
+ FullyQualifiedErrorId : ObjectNotFound,Microsoft.HyperV.PowerShell.Commands.NewVMSwitchCommand

Alex just a quick response to your advice re disabling AV, this did not work for me, after more searching the internet for a solution I found a post from 2013 where one poster offered the advice to go one step further, and it was to remove the AV package
completely, the package in question was KIS2013. I have KIS2015 and figured I would try it as I was getting a little frustrated with the constant failure to create a virtual switch.
Anyway, it worked for me, I removed KIS, rebooted, and the VS was created on the first attempt without any issue. So simply pausing/disabling the AV from within the AV program may not be enough, I suspect that some may work and others not, as in the case
of KIS. I wonder also if you disable the AV services at start-up if this would also work but I did not try it.
Anyway to other people experiencing this issue, I suggest disabling AV first as per Alex's advice, and if this does not work for you then suggest trying to remove the AV before doing anything more drastic like re-installation of OS as I have seen suggested
in more than one place.
Thanks
Mr Bee
--EDIT--
Just wanted to add, it is also worth 'excluding' any Hyper-V folders from the AV engine, I did not try this before removing KIS2015 so it may work without the need to remove your AV product, but on re-install I have now exluded the folders as suggest by
a few folks in various posts...

I have a problem when i am connecting my mbpr to a monitor , the internet is going very slow when i connect to the monitor plz help me if i buy a vga to minidisplay it will help??

i have a problem when i am connecting my mbpr to a monitor , the internet is going very slow when i connect to the monitor plz help me if i buy a vga to minidisplay it will help??

dovdov2,
are you saying that when you connect your MacBook Pro to a monitor, your Internet connection slows down, but when you disconnect the monitor, it speeds up again, and that this is reproducible from one day to another?
Does this happen both under OS X and under Windows 7, or only under one of them?
How are you currently connecting your MacBook Pro to your monitor?

Can others on a shared wi-fi slow down my connection or block my connection with software or special hardware?

Hi, Can others on a shared wi-fi slow down my connection or block my connection with software or special hardware? My connection has been very spotty and many times cuts off. The router is in our upstairs living room only 70 feet from my room, but it just seems like recent connections have been horrible. Also, I noticed the following image when trying to access the apple webpage. Anyone know what that might be? It's not the usual apple icon next to the address.
thanks
Dave

Welcome,
Indeed, by definition other users would "share" the bandwith and hence slow you down - but not cut you off.
More likely is that there are other devices (e.g. cordless phones) are causing interference. You don't specify which AP you have but if it an 802.11n one you should get better reception as the 5GHz range does get so much interference.
Try utilities like NetSpot or iStumbler to see what's in range.
The icon on the web page is probably something else not related to WiFi
Regards,
Shawn

HT1677 why when i connect safari to internet the other windows computers slow down the connection?

why when i connect safari to internet the other windows computers slow down the connection?

Your question has nothing to do with using iPhones in the Enterprise...which is the focus of this forum. Suggest you post it in the OS X forums

Can the wireless card in my mac wear out and slow down internet connection??

can the wireless card in my mac wear out and slow down internet connection??

Yes the WiFi card can wear out but not what you would really call wearing out like a pair of pants do. It can start to fail causing the connection between your computer and your Wifi router to slow down, IE transmit and receive less data in a given time period. And then it will fail completely.
But as to your internet connection being affected by a failing WiFi card no that can't happen.
If you turn the WiFi off and connect the computer to your router with an Ethernet cable does your internet browsing and downloading speed increase? If it does then there may be something wrong with the WiFi card in your computer or the WiFi section of your router. Hard to say which.
If after connecting the computer to your router with an Ethernet cable and your speeds do not increase then it is a problem with the router or on your ISPs end.

VideoError: 1000: Unable to make connection to server or to find FLV on server

Hello there,
I am using a simple FLVPlayback control in my AS3 document. In that I invoked FLVPlayback's methods like play, seek, and stop. Whenever I use these methods I get "VideoError: 1000: Unable to make connection to server or to find FLV on server" error while publishing the file. If I remove these method call then I am not getting this error.
Note: If I load above published file in another file then I'm not getting this error, however same is not working on LMS.
It will be of great help if someone help me resolve this issue.

I added trace that you have mentioned in first frame and here is output:
Player Name :: vPlayer
Player Source :: courseContent/LN_1324634806568/sampleVideo_01.mp4
VideoError: 1000: Unable to make connection to server or to find FLV on server
          at fl.video::VideoPlayer/stop()
          at fl.video::FLVPlayback/http://www.adobe.com/2007/flash/flvplayback/internal::showFirstStream()
          at fl.video::FLVPlayback/http://www.adobe.com/2007/flash/flvplayback/internal::handleVideoEvent()
          at flash.events::EventDispatcher/dispatchEventFunction()
          at flash.events::EventDispatcher/dispatchEvent()
          at fl.video::VideoPlayer/http://www.adobe.com/2007/flash/flvplayback/internal::setState()
          at fl.video::VideoPlayer/http://www.adobe.com/2007/flash/flvplayback/internal::httpNetStatus()

Re 1000 slow to switch connection ?????

Similar Messages

Maybe you are looking for