Re: 2-Way SLI not detected as SLI. Lane configuration?

Apparently you would need something like this:
http://www.amazon.com/PCI-E-Express-32bits-Adapter-Cable/dp/B00KZHDK4Q/ref=sr_1_5?ie=UTF8&qid=1436917739&sr=8-5&keywords=pci+to+pcie+adapter

Contact the vendor where you bought it from immediately. Hopefully you can return it.
I bought the same card a month and a half ago - same problem. I thought there would be a driver fix since I saw other people with the GTX960 (but other brands) ha...

Similar Messages

Access Connections Windows 7 Not detecting port

hey everyone, been having this issue where a windows 7 machine does not detect a local lan port when docked in thus not switching off wireless and onto the LAN. I've been running all of the other XP machines and it appears that they detect and ask which location they are. All of the machines don't have gateways on them. is there a way to get the windows 7 machines to detect and switch over without using a gateway?
Thanks

Hi, yesterday i talked to HP customer support executive and he provide me following link : http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_147188_1&swEnvOid=4063# After installing the driver the issue was same but at night when i was surfing internet using LAN cable all of sudden i saw "Device Driver Installation" notification at right down corner of my laptop. I was using LAN cable since my Wifi was creating problems. After that i opened device manager and i was shocked because all network driver including bluetooth, wifi are there in network adapter tab. I reboot my laptop more then 10 times and i observed wifi is working fine. I am not getting why my laptop behaving so random.

SLI NOT WORKING

Having issues getting my motherboard to work correctly with SLI not sure how to enable it to all be read properly.
Motherboard- MSI Z77A-GD65
GPUS- MSI GeForce GTX660ti Power Edition
If anyone could just point me in the direction of which setting to choose in bios that would be greatly appreciated.
I think its also worth noting that windows is only reading one of the cards at a time.
I have already tested the cards every which way including trying them individually in a different machine.

Quote from: Nutfriend on 17-September-12, 09:35:36
Flash to the latest version A6D: [follow intsrunctions from the link]
https://forum-en.msi.com/index.php?topic=158257.msg1183124#msg1183124
Looks to be BIOS issue:
Code: [Select]
03.Fix some PCIE card can't detect issue.
then retest.

My imac will not detect external monitor after recent update. Is there a way to fix this?

I have a VGA monitor plugged in to my imac using the VGA adapter to the mini-DVI. All was working well. Since I updated over the weekend, the computer will not detect the monitor.
Any ideas how to fix this?

Pcantin wrote:
I have tried another VGA monitor and that failed as well. Since you don't think the update was the cause, it may be that the adapter I am using decided to call it quits. I will see if I can find another and test that out.
I will look into the external drive idea as well.
Thanks for your help on this.
I didn't think about the adaptor, but you should at least visually inspect both the adaptor and the cable at both ends. If one or more pins got bent even slightly the connection might fail. The cables can also fail internally. Replacing the adaptor and cable may be the quickest thing to do initially. If you want to try to save money, first replace the adaptor, and if the problem persists, then go replace the cable (or vice versa).

MSI x48c platinum - does not detect SATA HDDs

I am having some problems with a pc build with motherboard not detecting SATA HDDs (MIS x48c Platinum).
I believe I have exhausted all other avenues, and I would appreciate some help if I have missed something obvious.
(details of other components are listed at end of mail).
When I built pc using these components, and went into BIOS settings, the SATA HDD's were not detected. I tried changing BIOS settings, but no difference if SATA, AHCI, or IDE settings.
I removed the HDDs and successfully tested them in another machine (also formatted them while had them istalled in other pc).
IDE optial drives are detected. I have tried to boot with these disconnected to ensure no isues with both IDE and SATA drives connected, but this did not resolve issues.
I have also tried connecting HDD to different onboard SATA ports, and connecting just one drive with no success.
Resetting BIOS defaults, and using clear CMOS reset did not resolve issues either.
Sometimes on boot, it takes a few attempts to boot correctly, and on these occassions I receive an error message "Warning !!! The previous performance of overclocking is failed, and the system is restored to the default settings, Press any key except "DEL" to enter setup ......." I haven't tried to set any over clocking.
I read about a number of issues on MSI forum related to SATA drives which were resolved by BIOS upgrade (mobo was shipped with v.7.0 released 20 March 08). I managed to install an old IDE HDD and flash BIOS, but still no resolution of issues detecting SATA drives (BIOS V.7.2 released 29 July 08).
I've tried everything I can think of at this stage. Is there anything else I should try, or is there something wrong with this motherboard?
Spec:
Motherboard:
343949 MSI X48C Platinum, X48, Socket-775,
DDR2/DDR3, ATX, GbLAN, 2xPCI-Ex(2.0)x1
Other components in build:
CPU Intel Core 2 Quad Q9550
Graphics Sapphire Radeon HD 4870 512MB
HDD 2 x Samsung SpinPoint T166 500GB
RAM 4GB (2x2GB) GeIL DDR3 1333MHz Value Dual Channel (7-7-7-24) PC3-10660
PSU 700W X-Power ATX SLI PSU
ODD DVD & CDR drives from an old pc - IDE connections.

i just remember i had once similar problem with a sata driver. the issue is this you can not adjust everything in bios in one go and expect mobo to know about it. what i mean is this for instance you disable the raid then you save it and exit and then when it reboot you go back to bios and reset another another parameter, you save and exit and on reboot you go back to bios and reset another parameter. i got round the prob that way and it worked and mobo saw the sata HDD. give this a shoot good luck and finally make sure raid is disabled
this is what i would do
1- make sure the jumper setting on your IDE Hdd is correct (Y may have to try this twice as there are two different setting on jumper setting for Master)
2- connect the sata HDD
3-click on power
4-go to bios and disable raid save exit
5-on reboot go back to bios
6--on first option click on it then you should see all devices that can be seen by mobo if you do not see sata HDD you have to click on enable for the auto to see the device once it sees the device save and exit. REMEMBER THE JUMPER SETTING ON IDE HDD CAN CAUSE PROB . SO try the other jumper setting for master, repeat this procedure once more hopefully you get it right

*SOLVED* Device not detected/ No driver installed for X-FI Fatal

OK!!!! the only reason I signed up here was to post that I have (for me) solved my problem.
Before I get into details this occurred on a fresh system with latest drivers for hardware used.
The problem was installing my X-Fi card on my 680i m/b (striker extreme).. when I would install the driver it would simply crash the computer and when it started up the hardware was not detected to used the software and the device manager said no driver installed.. I tried everything.. I installed the driver in safe mode (yay it worked without crashing) then I booted for windows only to have it blue screen for a second and restart... repeating the cycle.. so i reinstalled windows again... I tried installing the driver different ways in windows.. nothing worked... I gave up...
BUT!!!
today while i was at work I decided I would try one last thing.
this is what got it going. I have SLI 8800ultras that covered the PCI slot on the bottom of my board and I though I would try the card in this slot to see if it worked there... so I disabled SLI took out my bottom card put in the sound card in the bottom slot, installed the driver... It installed 00% no crash... even better it worked after the restart!!!... so then I had to test if it worked in the top slot so I powered down, moved it up to my top PCI slot and windows auto set the driver for it (as it was already installed) It worked in the top slot now... Finally I put in the second 8800 to make sure it worked with this slot in use... It still worked fine with SLI enabled. because I was unhappy with the mess I made installing drivers all the time as I did with the many crashes I decided to do a fresh install of windows making this card work from the start so here is what you need to do if you have a 680i board with SLI. this is exactly what i did with my fresh install.
install only one GPU card..
Put the X-FI in a different slot that isn't giving you problems
Install windows
Install service pack 2
install your chipset drivers
install sound card drivers
power down, change sound card to permanent slot
test - power down
put in the second GPU card
install GPU drivers
Good luck you all having this problem.. I hope my solution helps you.
Bryan

I think I?got a similar?problem earlier today when I was messing around with?onboard audio?that I later removed and after unplugging a?USB headset.
Have you checked the device manager, is there any higlighted hardware that has a exclamation mark next to it.
I fixed the issue by simply uninstalling the WDM device with the exclamation mark and restarted.

DVD drive not detected (K9N2GM-FD)

For some reason my motherboard( K9N2GM-FD) is not detecting my DVD drive.
Here is the setup I'm using:
AMD Athlon 64 X2 5200 Brisbane 2.7GHz
Kingston 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory
MSI K9N2GM-FD AM2+/AM2 NVIDIA GeForce 8200 Micro ATX AMD Motherboard
Seagate Barracuda 7200.10 ST3250410AS 250GB 7200 RPM 16MB Cache SATA 3.0Gb/s Hard Drive
a lite on DVD drive(model DH-20A4P33C) I bought at walmart
Antec NeoPower 550 550W ATX12V SLI Certified CrossFire Ready Active PFC Power Supply
The DVD drive is an IDE drive and it's getting power(I can open and close it).
I tried changing some things in the bios, trying a different drive, and trying a different IDE cable still can't get it to work.
every thing passes post test.
And the bios is version 1.2.
Any help would be greatly appreciated.

You did use proper standoff's to mount the board in the case?
yes
BTW, the controller is turned on I presume.
yes
If all is mounted correctly and there isn't any short, then I would RMA the board.
Ok I'll RMA it
Thanks for the help

X-fi fatal1ty device not detected when running speaker selection wizard

Gx-fi fatalty device not detected when running speaker selection wizard? ?
System is a custom build, based off an ASUS A8N-SLI Premium, with two GTX7800 display cards. in a SLI configuration
Fresh installation fo Windows XP Profesional with SP3 slipstreamed.
Origional CD fails to detect the card, claiming a supported device is not present.
This card has worked prevously, and is verified as fully functional in windows Vista. ?
Please note Windows Vista can not be used.
I have tried about 30 different versions of the drivers (each on a clean installation) and used both clean and dirty boots, and nothing is working.
Before anyone points me at other threads in this forum, please note i have been scouring this forum for the past week trying every sugestion there is, and I have raised a ticket with Creative (who despite the prommise of a 2 day responce, have yet to respond)
I have tired multiple versions of the NForce drivers, NVidia display drivers, Creative Drivers, Bios updates, Chipset hacks and more.
does anyone hav a sugestion that is not already posted on this forum.

Tried it on one of the spare PC's in the house earlier (Nforce 2 based) - still no recognition of the card whatsoever, it's as if it doesn't exist.
I'm guessing that the card is pretty much toasted eh?
--Jakk

X-FI Xtreme Music not detected by Win

My Creative X-FI Xtreme Music is not detected by Windows XP with SP2.
what I have tried:
) connected the X-FI to each of the 3 PCI slots
2) installed latest nForce and VGA drivers
3) installed latest BIOS (version 04)
4) uncompressed the SB driver exe file and executed SBXF_PCDRV_LB_2_09_000\Src\Drivers\setup.exe directly
The soundcard works fine on a PC with an old ASUS A7V-266 motherboard! Why is that?
system specs:
ASUS A8N-SLI
athlon 64 3000+
evga 7600GT
RAM 52 MB

I had a similar problem that my ASUS A8N-VM CSM board didn't detect my X-FI card properly and the driver setup ended with a blue screen / reboot of my machine.
A lot of boards with NVidia chipsets of the 4series seems to have that problem.
With my ASUS A8N-VM CSM I found a solution: updated BIOS to beta version 002 and disabled the onboard IEEE394 (firewire) interface in the BIOS setup. After that I installed the X-FI without any further problems and it's now running very well.

IPod Touch, not detected in Windows or iTunes...

First of all, hello to everyone...
i want to say that i read a lot EVERYWHERE about my issue and still i couldnt find a solution...
the problem is easy, i have a 3rd gen ipod touch, OS 4.2.1 now fully working... but, it's not detected in windows or itunes, as simple as that, and as u all have read in lots of other posts...
my ipod is now working because i took it to an apple store and they charged it in a MAC and they had no problem at all. the MAC detected the ipod, with all its content and my ipod's name...
but when i took it home -this has been hapenning since maybe... 5 MONTHS!-, i plug it in my PC and nothing happens...
ok, first of all, my spec... win vista home premium 64 bits, last version of itunes...
i tried ALL the solutions provided in APPLE official support page, and nothing happens... that means:
1- completely uninstall itunes and then reinstalling it... i ALSO FORMATED my entire hard drive twice!!!!
2- tried all USB ports and even an entirely different PC and nothing happened
3- bought 3 different IPOD to USB cables and nothing happened
4- tried setting ipod to restore, that way itunes SOMETIMES detected the ipod but i coulnt restore because of different error codes, so i had to take it several times to apple store to "unblock" it...
the only way it works -detection and charge- is with MAC computers or dock systems such as an iHome my gf has thats the way im charging it now, but otherwise it wont work...
i would really appreciate any help, since idont know what else to do!!
thx in advance!!

HI I was having some other problems getting my itouch to restore because it was not being recognized in itunes and kept erroring out. Now it has finally restored after I updated all kinds of drivers and removed and reinstalled itunes and apple software a million times,(yes this is all after installing itunes 8.1 and paying for an itouch upgrade as well) Now itunes says it cannot do anything with the ipod because it is getting an invalid response from the device. So it won't put anything back on my itouch or even show that I have plugged it in. I emailed tech support, If I find anything out I'll let you know, will you do the same for me?

Ipad 2 not detected in recovery mode on my ASUS Windows 7 laptop

I have had this issue on all my idevices since I got this laptop, so this isn't directly associated with the new update.
I can sync my idevices with itunes on my laptop without any issues, but every time I try to install an iOS update, when it get to the stage where it is "preparing to restore your device" or some such, the laptop installs a new device driver and then itunes just spins awhile until it finally spits out error 1601 and then the device is stuck on the screen where it prompts you to connect to itunes.
At this point itunes on my laptop will not detect the device. I can see it listed in my device manager and it claims the usb driver is working correctly, however it no longer makes the beeping sound when I plug or unplug the cable, though it does disappear and reappear in device manager, which indicates it recognizes ipad plugged in, but not in the same way.
I have tried all the advice on the apple website re: unintalling reinstalling itunes an all it's components, disabling antivrus, firewall and non essential services, removing usb devices etc to no avail.
If I take my device over to my parents 32 bit vista desktop it recognizes it, installs the driver and itunes recognizes an ipad in recovery mode and I was able to restore the software and update to the new iOS on that desktop, then had to bring it back to my laptop to restore the software from my last backup.
My first question is....when the new ios is being installed is it putting the device into recovery mode as part of the process or is it going into recovery mode because the process errors out? If it's the former, then my assumption is that the whole issue is that for some reason something on my laptop is stopping itunes from being able to recognize my ipad while in recovery mode. If the later, then ?
My second question is....is the problem the driver, the usb port or something else unique to the laptop? I tried uninstalling and reinstalling the driver, but if i let winows detect it after uninstalling it can't find a driver and i get the exclamation point. If i try to manually install per the apple instructions, it tells me that the driver file is not compatiable with my device. So either windows is somehow installing the wrong driver while device is in recovery or the comp isn't detecting what type of device it is properly or ?
I'm hoping maybe i can get the next os update over the cloud and this will become a non-issue, but having to go borrow a pc to update this thing gets really old as the laptop is my only computer, so any ideas would be appreciated.
Laptop is an ASUS ROG - not sure the exact model running 64 bit Windows 7 It has two usb ports and i have the same issue on either one.
The PC i successfully updated my device on is an older Dell running a 32 bit version of Vista

Hopefully this will help you. Try placing your iPad in recovery mode again. You may have to try this a few times.
iOS: Unable to update or restore

Airport card works in 10.1, HW test passes, but not detected at all in 10.4

Ok, Hi. I'll first admit this is my first post so go easy on me!
I just bought a used iBook G3 and it was working fine for a while until about a month ago when all kinds of weird things stared happening. Some of which those problems I solved from reading previous topics from these forums - but anyways, I'll skip all my other problems and get right to my current one.
First off here is the complete specs:
12.1" iBook G3 "dual USB series"
500MHz PPC processor
128+256MB ram = 384MB RAM
15GB hard drive (NOW 160GB HARD DRIVE!)
No Airport Card (NOW ONE HAS BEEN ADDED!)
Multiple OS's - OS9 and 10.1 were included (have original disks)
I also have a set of 10.4 Tiger CD-ROM disks
Anyways, here is basically what is happening. I bought an Airport card off eBay for my iBook. I installed it about a week ago. I booted into 10.4 Tiger and it did not detect the card. Tried to do the manual setup with the wizard and it said there was no card attached. I went into the system profiler and is said No info available under the airport section. I then booted to my "apple hardware test disk" and ran the full/extended test. It passed everything (including the Airport card) so I know that is not the problem. I then booted into OS X 10.1 and lone behold the card is detected and is working without any fooling around with! Instant wireless internet! So I know that the card is working, but I want to use it in Tiger as 10.1 is almost worthless. So I boot into Tiger again knowing that the card is working, and Tiger still does not recognize it! I even booted into OS 9 and it detected the card (although it was having some connection problems, but at least I know that it IS detecting it.)
Here is what I tried (so you can cross these suggestions off your list! lol)
I've deleted the Airport "ktext" files, etc. (can't remember the actual names of the files, but I've cleared all of those caches and still no luck.)
I've zapped PRAM
I rest NVRAM
I rest the PMU.
I did a Arcive and install of 10.4
...All of which did not help. Again, the card worked in 10.1, but 10.4 is completely blind and can't find it!
Now we are caught up to today. I was having many other odd problems and it all lead to my hard drive probably being bad. So toady I finally bit the bullet and bought a new hard drive from Best Buy. It took me forever to install it, but I did it, and it works! Now I have 160GB (make that only 128GB detected) of space. I partitioned it 4 ways as well:
"Tiger" - 80GB
"Other OS" - 30GB
"Extra Space 1" - 10GB
"Extra Space 2" - 8GB
xxxxxxxxxxxxxxxx- 128GB Total
So now that I have a new hard drive (that I was told would fix all of my problems because my old one was "bad" I thought I would have it working today, but no. So I put in the brand new drive, partitioned it, booted off my Tiger disk, installed it on the 80GB partition. The install went fine. So I now have 10.4 on the new drive. Seems to be a lot faster then my old drive! I did the combo updater (which I downloaded on my iMac and transfered to a flash drive and loaded on to my iBook) Ran the updater, and now it is running 10.4.11! But then I realized, the Airport card is STILL not detected in Tiger!!! - I thought the new hard drive would solve all my problems as I was staring from scratch, but no, there is still a problem!
I ran the Apple hardware test disk again, full test, and it said my Airport card is still fine. I didn't reinstall 10.1 yet (nor did I want to, I was hoping Tiger would work for what I wanted) but it seems now that I might have to go back and install 10.1 again. I don't know what it will prove - other then it will work again, but I don't want to use 10.1 so I'm not going to bother doing all that again.
Anyways, after looking into this further, I brought up the system boot log (of tiger) and found these lines interesting, and hopefully useful to you guys:
localhost kernel[0]: AirPortFirmware: start Sta f/w download
localhost kernel[0]: AirPortDriver: F/W download failed
localhost kernel[0]: AirPortFirmware: start Sta f/w download
localhost DirectoryService[64]: Lunched version 1.8 (v346)
localhost kernel[0]: AirPortDriver: F/W download failed
it then lists the eithernet address and then ramblers on about other nonsense. If anyone needs the other "stuff" i'll try and save the whole log file and attach it here if anyone needs it.
So could anyone please help? It seems as if i've done everything, and still can not get an answer on why it is doing this, and how to fix it!
Please Help!
Thanks you so much, and sorry for the long yet detailed message!!!
-Scott

Hey, just wanted to post an update to let everyone know what I ended up doing.
Bottom line with the airport card I had is that is was "bad" - well only kind of. I got an email from a guy from a local PC repair shop. He told me he had just gotten one of those cards in and had it for sale for only $25. So I was chatting with this guy and he said it would be alright if I brought my iBook right in his shop, swap the cards and try it before I buy it. So I did so. Very nice guy and we swapped out the cards no problem. Right away it recognized his card and worked! I then downloaded the Airport update and ran it. (remember before, when I tried to update my card, after it restarted it was no longer recognized.) So we did the update with HIS card in and after it restarted, it STILL worked! It also added WPA support as well! We then booted into to Tiger (remember the old card wasn't recognized at all in tiger) and it ALSO worked in Tiger! I also had WPA support right away! So I bought the card and was all happy that it was all working again! I then figured out what the problem was with the old one.
My original card was one of the "original" originals. Then, Apple "changed" the original cards and replaced ones with "128bit" support. (this is all before the extreme cards) I then found out that the newer original cards (the one the guy just sold me) are worth MORE because these are the cards that are compatible with the newer update (128bit WEP, and WPA) The cards looked exactly the same, but the newer card has "128 Bit" printed on the bottom of the card.
SO, it ended up, I was "asking too much" out of the card I had - as the card I had did not support what I was trying for it to do. Where as the newer card I bought IS compatible with the update, and worked like a piece of cake. So all in all, the first card I had isn't "dead" it just wasn't working with what I wanted it to. So I'm going to end up selling it. Hopefully craigslist, but I will get more for it on eBay. so that is what I'm going to do. I'll just make sure to tell people this "story" so they don't try and do the same thing I did. But for someone with an even older laptop, an older OS, or an older router, this card will work just fine for them.
So thats basically it! Looks like I got everything working!
-Scott
Message was edited by: sdschramm

System Update 5 not detecting drivers for M92P (2988-A6U)

I've installed our corporate image (Windows 7 SP1 - 64bit) which has an older network driver installed. 11.12.36.0
The latest driver from Lenovo's web site is 11.15.16.0 which installs without a problem.
So i re-imaged again with the older driver 11.12.36.0 and figured that the easiest way to update the driver(s) would be to use System Update 5.
To my surprise when i ran system update it returns the following:
"No packages applicable to your system were found"
No i know i could just fix the image and install the driver during the image process but I want to use System Update.
Does anybody have a clue as to why System Update is not detecting the needed drivers?
Has anybody had any success with running System Update 5 on a Windows 7 sp1 64-bit machines?
Thanks-

Unfortunately right now it appears that the 11.15.16.0 version of that driver does not have TVSU support yet. Once the content team completes the process of creating and testing the package through TVSU, it will be published for customers. I'll try to find out where this one falls in the queue. Sorry for the inconvenience.

Windows 7 Pro x64 does not detect HP Mobile Data Protection Sensor (accelerometer)

Hello there.
I installed win7pro x64 yesterday and already came across a serious problem that makes my way of using the notebook a bit dangerous for my precious data.
When I was working on HP-branded Vista 32bit (from recovery partition etc), there was a device called HP Mobile Data Protection Sensor together with HP ProtectSmart (or Protect Smart) software. In other words, the HDD accelerometer that parks HDD's heads when it "feels" it's falling or something, and software for it. It worked brilliantly.
Until I decided to install Win7... Then, surprisingly after a driver-install failure and taking a look at the Device Manager I noticed that there's no such device! I checked it three times, looked at every device's property, even reinstalled Vista 32bit back - it showed again - and installed Win7 - not detected again. There's nothing that has Device ID's HPQ004! I remember people saying that after fresh Windows install, there were 6 unknown devices or more. I had only 5. [Fingerprint device, 3x MemCard reader and IR receiver]. There was no accelerometer... Also, when I try to install the drivers/software, the windows pops up:
ProtectSmart Hard Drive Protection: with text Property.AccelerometerNotPresent
and then another one saying something like Features were not installed because of installation error or unsupported feature.
So now I'm stuck with a notebook that is unsafe to travel with, because the disk is no longer protected
I already installed all the drivers available from HP page, even downloaded newest ones from Intel (chipset) etc.
Is there a solution to this? Has anyone else encountered this problem?
Windows 7 is officially out and available as RTM version, not beta, so I think HP should open support for it and release new drivers for win7! And most importantly, fix this issue ...
This question was solved.
View Solution.

Well, thanks to myself, I fixed it. After some thinking I remembered that ACPI = BIOS-related. It appears that there is a problem with the newest (F16) BIOS.
F.16 changelog is below:
Version: F.16 A (26 May 2009) Fixes
Updates the Intel MRC Code to version 2.7.
Updates the Intel AHCI OP ROM to version iSrc 1.20_E.0012 11252008.
Updates the BIOS to support Microsoft Windows Vista Operating Systems with Service Pack 2 (SP2).
I went back to version F.14 and... boom! New (unknown) device found And guess what, it's ACPI/HPQ0004... So now my HDD is protected again ^^ yay!
I don't know which of these changes cause that, but it looks that that can be fixed.
I'll go back to F.16 again to see if the device will disappear and then contact HP support on that case.
EDIT: Well, F.16 breaks things again, so it's definetely a BIOS problem. Thanks for... umm... well... at least spread the word, guys I hope this helps if someone has the same problem.
Message Edited by dark_skeleton on 08-22-2009 07:08 AM
Message Edited by dark_skeleton on 08-22-2009 07:11 AM

Having problems connecting a late 2011 Macbook Pro 2.2ghz i7 to a Sony KDL-32L5000 using a display miniport to DVI adapter (DVI to VGA cord). The TV is not detecting the macbook. Anyone have this problem?

Having problems connecting a late 2011 Macbook Pro 2.2ghz i7 to a Sony KDL-32L5000 using a display miniport to DVI adapter (DVI to VGA cord). The TV is not detecting the macbook. Anyone have this problem?

You really have to mess with the resoluton, espescially the refresh rate, as it varies from projector to projector, monitor to monitor. Even within the same brand! Because so many manufacturers are trying so many different things to become the next cool kid on the block, and the way the formats are being configured that's now part of the game.
That's why so many professionally produced corporate shows hire a dedicated projectionist for the video presentations. Too many bugs in the honey.
Refresh & sesolution are the first things to look at.
Just so you know that colors in PowerPoint PC, and PowerPoint Mac, don't exactly match... go figure.
I forgot to mention another thing, sometimes it's the projector that needs to be tweaked.

Re: 2-Way SLI not detected as SLI. Lane configuration?

Similar Messages

Maybe you are looking for