Re: accelerated depr for few assets

Hi Gurus,
I would like to run the Accelerated Depreciation for few Assets for 4 months, I need to post 3 months in June and 1 month in July base on net book value base on new percentage, and only part of some assets need to be impaired.
As the normal depreciation has also been run for April and May month end, i need to take this into account when posting the accelerated depreciation to avoid ending up with a negative asset.
The remaining part of the asset needs to be depreciated over the existing useful life.
so let me know whether it is possible or not.
Thanks in advance,
KK.

Hello,
You can post Unplanned depreciation on the required assets. Search for "unplanned depreciation". Lot of Information is already available on the site.
Regards
Nitin

Similar Messages

Stop Depreciation for particular assets for a period Temporarly

Hi Friends
I Need to Run the depreciation for october, but my requirement is , i dont want depreciation to be calculated for few assets for this period october as these asses were transfered to other cost centers, i need to stop depreciation to be calculated in this depreciation run and run it latter for the same period.
Is there a way to do this.
Thanks in advance
Javeed
Moderator: Please, search SDN

Hi....
As per your issue
1. Use shut down tick mark in the respective assets masters in AS02
2. Block respective assets masters for temporary purpose
3. And change the Depreciation keys to 0000
Once run the depreciation for October and replace all the settings.
I hope it will helps you.
Regards
vamsi

How can i shut down depreciation for an Asset for few days??

Hi Friends,
How can i shut down depreciation of a particular Asset for few days say 5 days??
I have done the necessary changes in Time dependent tab like checked asset shut down and in AFAMA i changed the shut dawn as YES.
The only problem i am in is "how can i maintain the 5 days like from 10.05.2009 to 14.05.2009
If i go to MORE INTERVALS then only From date is available over there.There is no To date opition.
How can i maintain To Date??
Plz suggest.
Regards,
Sumaya

Hi
Go for shut down approach. But your depreciation key should allow shut down. check your depreciation key configuration
In asset master data
Go to time dependent terms,
Define the appropriate time interval for shutdown
Set the shutdown indicator
The system does not calculate the depreciation for the shut down period,
The useful life of the asset will increase to the extent of shutdown period.
When you remove the shutdown indicator, system automatically resumes the depreciation calculation.
Regards
Tanmoy

Stop depreciation for few months

Hi,
I want to stop depreciation for few months.
For those months system should not calculate the depreciation.
for example, i dont want to calculate depreciation for assests for the sep, oct months, after that system should calculate depreciation.
how to proceed this.

HI,
The system will calculate the depreciation based on the useful life defined. But depreciation won't be calculated for the shutdown period as defined in the Asset Master.
For example if you define 12 periods (1 to 12) of useful life for an asset, and assume that shut down period is 3 and 4, then the depreciation won't be calculated for period 3 and 4 but the useful life of the asset will be extended to the period 13 and 14. (i.e period 1 and 2 of next year). and the depreciation will be calculated for period 1 and 2 of next year.
Thanks
Prasada

How to accout unplanned depreciation for group assets

Friends,
Unplanned depreciation is accounted for group assets few years ago.This is for special depreciation areas.
Now i would like to reverse this amount as write up unpalnned depreciation, but system is throwing eror message that: This function is not possible for group assets.
OR
The issue what we are facing is special dep areas has one cent as -ve acquisition due to which we are unable to deactivate the asset. This one cent was accounted as unplanned dep few years ago. How do we make the APC as zero when it has -ve APC in special dep areas.
pl, suggest how to go about this.
Thank
NNS

Hi,
This is not possible in the standard and this is not a from SAP intended and provided solution. Therefore I ask you to be really careful and test it bevore on a test system. (and perhaps to discuss this with your SAP consultant)
The workaround to remove the group asset from table ANLB-ANLGR from the asset could be done by creating your own program.
Regards Bernhard

Restrict custom metadata for DAM assets

Can we restrict custom metadata to appear only for a few DAM assets? For eg, I have assets under two folders, myProject1 and myProject2 in DAM. Suppose I want the custom metadata fields to show up only for the assets under myProject1, can that be done? If yes, how?
This is with respet to the details in http://wem.help.adobe.com/enterprise/en_US/10-0/wem/dam/how_to_edit_metadata.html

Hey Sham,
I have customized the granite interface to have the additional metadata field.
I have even overlayed /apps/dam/gui/content/assets/metadataeditor/items/content/col2/image/items to add an additional metadata node , to be present in the granite interface, but i see that it works fine for "projectA", ie. both png and jpeg files have the sample metadata in the granite interface, but the .png files of projects, other than "projectA" eg geometrixx have the sample metadata field, while the jpg files dont, after using the function: function(f, r, p) { if (p.indexOf("/content/dam/project/providers") != 0) { f.hide(); } return true;.
Kindly suggest where i have gone wrong.
Regards,
NZ

HT201412 My Macbook pro freezes for few minutes every time I startup after charging

My Macbook pro freezes for few minutes every time I startup after charging
I am using the latest update of IoS

'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that temporarily turns off hardware acceleration, resets some settings, and disables add-ons (extensions and themes).
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
*In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
*In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".
:[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, theme, or hardware acceleration. Please follow the steps in the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.

Depreciation off for specific assets

Dear ALL:
I have created few assets. Managemeny wants to turn off depreciation for them becuase they will be send to some of our display centres and we want to treat them as assets in our books but no depreciation is to be to be chagred..Please guide how to carry out this process.
Regards

Dear Atif Farooq,
Please use "Asset Shutdown" option on time dependent data screen for the needed period.
Regards,
Milen.

Hi. I am using a time capsule for few PC s. I have made 5 different account to access time capsule. but in windows when i enter account name and password for one account, i cannot access other accounts, because windows saves username

Hi. I am using a time capsule for few PC s. I have made 5 different account to access time capsule. but in windows when I enter account name and password for one account, i cannot access other accounts, because windows saves username. how can i prevent this from happenning. I really need to access all my accounts and dont want it to save automaticlly.

Why have 5 accounts if you need to access all of them.. just have one account?
Sorry I cannot follow why you would even use the PC to control the Time Capsule. Apple have not kept the Windows version of the utility up to date.. so they keep making it harder and harder to run windows with apple routers.

Object form is not getting displayed for few users

Guys
I have successfully implemented approval and provisining flows for a new resource in OIM 9.1.X. This resource has an object and a process form.
It is working fine in production for few users. But for few users, the object form is not getting displayed to give the input while requesting this resource.
Please let me know what might be the issue.

Hi,
Could you please check whether you have added ALL_USERS group as a resource administrator group in resource object definition?
Add AL_USERS group as a resource administrators with the read access.
We had similar issue and managed to resolved.
Thanks,
Pallavi Chaudhari

Stop depreciation for an Asset

Hi,
I understand when we create a asset master, the number of life years and the depreciation key are copied from the asset class it belongs to.
However, the finance side requires to pause depreciation for a asset, or they could want to stop depreciation for this asset, and how do we go about doing it? The situation now is that this asset already have depreciation posted.
I appreciate any help.
Thanks

You can use the asset shutdown functionality so you can pause the depreciation for a given period of time.
AS02 > Time dependent tab , click the asset shutdown. In case asset shutdown is not available, check spro and customise fixed asset master data.
Hope this helps.
Regards,
Robert Sayo

SRM 7.0 - Can't Create a shopping cart for an Asset

Hi,
I am trying to create a SC with account assignment Asset in SRM 7.0, extended classic.
Once I change the Account Assignment Category to Asset and I search for the asset number I receive the following message.
Missing Authorization check to display master data.
The user ID has SAPALL, also communication between R3 4.7 and SRM is working fine for vendors, PO's, Confirmations, Invoices, material groups, etc....so the system users would appear to be working ok I assume.
Also, if I click the Create Asset Master button on the detailed account assignment screen it is not able to generate/retrieve an asset number as it should.
Any ideas? The account assignment configuration should be fine, it matches our production SRM 3.0 system, which has no issue with this functionality.
Thanks,
Matt

It seems that the table does not have the entries, maybe b/c we are on R3 4.7. Could you tell me what the entries are suppossed to be to allow the Asset and Cost Center lookup? The search does work for WBS element though and I don't see anything specific to WBS element in that table. In any case if you know the entries that would be great, also this table is not modifiable via SM30, here are the entries that I have in that table.
AUF_NETNR     PLM_HELPVALUES_AUTHCHECK
BU_PARTNER     BUPA_BAPI_F4_AUTHORITY
DAENR     PLM_HELPVALUES_AUTHCHECK
DOKNR     PLM_HELPVALUES_AUTHCHECK
EQUNR     PLM_HELPVALUES_AUTHCHECK
KUNNR     PARTNER_BAPI_F4_AUTHORITY
LIFNR     PARTNER_BAPI_F4_AUTHORITY
MATNR     PLM_HELPVALUES_AUTHCHECK
NW_AUFNR     PLM_HELPVALUES_AUTHCHECK
PARNR     PARTNER_BAPI_F4_AUTHORITY
PS_POSID     PLM_HELPVALUES_AUTHCHECK
PS_PSPID     PLM_HELPVALUES_AUTHCHECK
QMNUM     PLM_HELPVALUES_AUTHCHECK
S_AGNCYNUM     INT_FLBOOK_F4_AUTHORITY
S_AIRPORT     INT_FLBOOK_F4_AUTHORITY
S_BOOK_ID     INT_FLBOOK_F4_AUTHORITY
S_CARR_ID     INT_FLBOOK_F4_AUTHORITY
S_CITY     INT_FLBOOK_F4_AUTHORITY
S_CONN_ID     INT_FLBOOK_F4_AUTHORITY
S_COUNTNUM     INT_FLBOOK_F4_AUTHORITY
S_COUNTR     INT_FLBOOK_F4_AUTHORITY
S_CUSTOMER     INT_FLBOOK_F4_AUTHORITY
S_FLCONN     INT_FLBOOK_F4_AUTHORITY
S_FLCONN1     INT_FLBOOK_F4_AUTHORITY
S_FLCONN2     INT_FLBOOK_F4_AUTHORITY
S_PLANETYE     INT_FLBOOK_F4_AUTHORITY
S_TRNUM     INT_FLBOOK_F4_AUTHORITY
TPLNR     PLM_HELPVALUES_AUTHCHECK
USCOMP     SUSR_BAPI_F4_AUTHORITY
XUBNAME     SUSR_BAPI_F4_AUTHORITY

Report takes long time for few records

hi frends,
I m facing one problem with my Web based erp application which is developed in .net , in my application when i open the report from my applicaiton , in my temp folder there one file gets created name is "rpt conmgr cache"
bcoz of this for few records also my report takes too much time and opens very slow and it takes long time, and it happens in some of the reports only , other reports are working cool and its not creating any file in temp folder,,, so can u guide me whats this file and what can be the solution for it,
Thanks
Mithun

hi sabhajit,
i have already checked the sql query it is taking less then seconds.
any other steps u want me to check then pls let me know?
thanks mithun

GR/IR Clearing Account for Material & Asset

Hi,
We want to maintain different GR/IR Clearing Account for Materials & Assets.
Pls. guide.
Regards,

Hi
In case of asset - we define account determination in asset master which is like stock account for material. But if you use purchase order then for asset you use account assignment category as A - it means it is like account assigned purchase order. So all goods reciept credit on these POs will go to GR/IR account created without valuation class. Same time if you donot maintain service masters then goods receipt will go to same account (no valuation class). So either you need to define service materials or use same account for both.
Thanks

SD- Sales Order - ATP check not working for few item in same sales order

Hi Experts,
Need help we activated ATP check but for few item i could not find confirmation qty after availability check. In same SO out of 4 items for schedule line it confirming qty for 2 item but it's not confirming for remaining 2 items though stock is available. Please guide me how to correst and what need to check.
Manoj

Dear Manoj,
As you know, ATP is a big subject & some times its difficult to point the exact problem.
In your case, I suggest you to execute the function module:BAPI_MATERIAL_AVAILABILITY using Tx:SE37
key in selection criteria , in results check the "ATPQTY"- it will show you how much actual stock is available for use i.e. ATP qtty.
still if you find the availability & system not confirming the qtty, then problem could be in checking rule
Tx:OVZ9 check in relevant combination, whether you are considering RLT or not?
is this case with MTS or MTO
because in Sales order -
for MTS - checking rule "A" & MTO checking rule will be "AE"
Regards,
Reazuddin MD

Re: accelerated depr for few assets

Similar Messages

Maybe you are looking for