Re-activate after resetting Ipad 1

Hi,
My Ipad 1 was running slowing few weeks ago, so i did reset it. After resetting process, it's unable to re-activate.
Here is the IMEI
It's bought in Taiwan or Hongkong by my company La Veranda Resort in Phu Quoc, Vietnam.
Please advise me what to do!
Tuan (Mr.)
<Edited by Host>

iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
If you can’t update or restore your iOS device
http://support.apple.com/kb/ht1808
 Cheers, Tom

Similar Messages

  • Can't activate after latest iPad upgrade. Advises me to go to iTunes but it won't get off the error screen.

    Can't activate after latest iPad upgrade. Error message advises me to go to iTunes but it won't get off the error screen.

    I am the original owner of an ipad and it woke it yesterday requiring me to activate it using the original apple id used to set it up.
    It will not accept my apple id and password.
    It does not show up in my icloud under devices.
    I have tried hard restart (home + power) and itunes recovery. 
    I am out of ideas and have not found anything for original owners (as opposed to someone who bought it from someone else).  I did see some posts from last year where a few people had the same problem and took it back to apple and got a refurbished unit given to them since customer service and engineering couldn't fix it.  I was wondering if this was related to the recent ios8 upgrade. Anybody else have ideas or same problem before I hike down to the apple store for mercy?

  • After reset ipad i lost photos i want recover photos

    Lost photo after reset ipad 
    How can i get back lost photo

    If they were on the iPad when you last synced/backed up on your computer's iTunes then you can try restoring the iPad from that backup (backups and restoring). Otherwise I'm not aware of any way to recover them.

  • After resetting ipad, unable to get to home screen. Only displays request to attach to Itunes, which I did. What next?

    after resetting ipad and removing all programs, cannot get to home screen. Only get request to plug in to itumes,which I did, and it still goes back to that, and the apple logo.

    The message means that you need to restore the iPad using iTunes. When you connect the iPad to your computer and launch iTunes, if you cannot see the iPad under the devices heading in the sidebar of iTunes, you wll have to restore using recovery mode. If you see the iPad under the devices heading, click on it and then click on the summary tab on the right and click on restore.
    If that doesn't work, this is how to restore with recovery mode.
    Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
    Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
    If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
    While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
    If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
    Use iTunes to restore iPad.
    If you are running iTunes 11 - and you can't see the sidebar - to to View>Show Sidebar from the iTunes menu at the top of the screen.

  • IOS 7 will not activate after restore - iPad

    I have just updated my iPad mini to iOS 7 Via iTunes. I did a full restore, it got to the start screen, Asked for the language and location, I then connected it to both Wi-FI and iTunes and it will not activate after multiple attempts!

    Activation servers are being stressed just as hard as the download servers. Best to just wait it out and try again later.

  • TS3274 IPAD wont activate after resetting to startup screen

    A couple of nights ago, my iPad3 reset itself to the signing screen - and starting cycling through the activation process.  I can't get it to activate now...and itunes won't complete activation when hooked up by USB - any suggestions?

    Try resetting your iPad.
    Do you have an iPad Wi-Fi + 3G? Make sure it has access to the Internet through your computer, a Wi-Fi or cellular data network.
    This might help ya out too -> iOS: Resolving activation messages

  • New iPad won't activate after resetting

    iPad won't activate thru iTunes after erasing all content and settings. iPad is back at the Welcome screen like when it was new, but go thru iTunes to set it up and no activation.

    Can't activate by signing in.
    I can't even get to that point. After I enter a wifi password the iPad goes to activate and that's where everything stops with: Can not activate a this time. Please try again later. I've tried a million and 6 times, there is no later...
    Also noticed that the serial# listed for the iPad in iTunes is N/A. After a few minutes of trying it gives me the above message. It also shows a lock near the message in iTunes. This shows that somehow the iPad is still locked after I erased all data and wanted to completely start from scratch?

  • Can't get iMessage to activate after resetting my Apple ID password.

    After having trouble signing into iMessage on Mountain Lion on my Mac Mini, it was suggested to reset my Apple ID password. After doing that, I re-entered my password everywhere on my iPhone. But now, my iMessage and Facetime on the phone won't activate. It stays on "Waiting for Activation" for about half a day and then says that activation was not successful.
    I went through all the other related threads, and check Settings > Phone to make sure my number is showing, I fiddled with the Date and Time settings. I even updated to iOS 6.0.1. Nothing seems to work, and I genuinely don't want to reset my phone. Is there any way to resolve this issue?

    I deactivated iMessage on my mac completely and retried and still have the same problem. I then decided to place the phone in DFU mode and restore iOS 6.0.1 from the IPSW. After restoring from iCloud, iMessage is still stuck on "Waiting for Activation"
    I did find something interesting though. I opened Xcode > Organizer and viewed the phone's console. When switching iMessage on, the following is displayed in the log:
    accountsd[103] <Notice>: 2012-12-04 00:26:14.404 accountsd[4871]: imagent (43) is trying to verify account credentials for account: (null)

  • After reset ipad, could not use imessage any more!why?

    why could not I to use imessage any more after I reset my ipad?

    There are several Resets... How... Exactly... did you Reset ? 

  • After resetting iPad I cannot find my photos :(

    I misrecorded my restrictions passcode and had to restore my iPad to the default. I backed up and saved everything, but cannot seem to get important things back - like my photos! and Notes.   Please help!!!

    Hi Eric Ferguson,
    Thanks for using Apple Support Communities.
    For troubleshooting on this, take a look at this article:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/ts3694
    Error 13, 14, 35 and 50 (or -50)
    These errors are typically resolved by performing one or more of the steps listed below:
    Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
    Put a USB 2.0 hub between the device and the computer.
    Try a different USB 30-pin dock-connector cable.
    Eliminate third-party security software conflicts.
    There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
    Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
    Try to restore from another known-good computer and network.
    Best of luck,
    Mario

  • Unable to activate after reset

    I went to reset my phone, when I did this, it took me through the steps to activate the phone, but was unable to do so.I keep getting a message saying - could not be activated because the activation server is temporarily unavailable. Have been trying to acivate the phone for more than 9 hours.Getting really frustrated. Anyone suggestions?

    Go to your service provider and see if they can't get it activated for you. If that doesn't work, it may be that the servers are overloaded and you'll have to wait it out.

  • Even after resetting apple id password still won't activate my phone

    I did a reset erase all contents and settings but i'm stuck at activation lock! The iphone is mine and email is correct but even after i reset my password, IT STILL WON'T ACCEPT THE NEW PASSWORD :(( please help! Thank you.

    moniiice
    Re: Does reset all content and settings automatically sets Find my iphone off?
    Jan 27, 2014 8:54 AM (in response to KiltedTim)
    But when i sign in my icloud account on the activation lock, it still won't accept it. Even if i tried resetting my password. I believe that i use the right icloud account but still it won't activate it. I tried locating my device on find my iphone and the device was not there, does it mean my device has already been erased?(i resetted all content and settings) but why does it still have an activation lock after reset? Tried everything but still no luck :( reset apple id or password but still nothing :(

  • After a rescent update on my ipad 3 Ican no longer connect to my pc with WIFI.  I have tried resetting ipad and itunes but nothing works.  Talked to support and they were no help.  Any suggestions?

    After a rescent update on my ipad 3 I can no longer connect to my pc with WIFI.  I have tried resetting ipad and itunes but nothing works.  Talked to support and they were no help.  Any suggestions?

    What error do you get if any?
    Have you tried connecting to another network besides your own?
    Do you use DHCP on your router or static IP address?

  • My iPad crashed when I updated latest iOS software. After resetting the system, I am unable to get back Pages, Numbers and Keynote Apps. Anyone has same problem? And how can I get back the apps?

    My iPad Air crashed after updating latest iOS software. After resetting the system, Pages, Numbers and Keynotes are not available. How do I get the apps back into my iPad?

    You can also re-download the apps.
    App Store>Purchased>Re-download apps

  • IPad 3rd Generation frozen after reset was done. I get a logo but no status bar

    iPad 3rd Generation frozen after reset was done. I get a logo but no status bar

    Hello there, darney87.
    The following Knowledge base article offers up some great troubleshooting steps for the issue you're describing with your iOS device showing an Apple logo:
    iOS: Not responding or does not turn on
    Resolution
    If a single application is not responding or stops responding when it opens, you can force it to close.
    If the device is unresponsive or if certain controls aren't working as expected,  restart your device.
    If the device remains unresponsive or does not turn on (or power on),  reset your device.
    If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
    If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
    Let it charge for at least twenty minutes, then see if it starts normally.
    If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
    If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
    If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
    If the above steps do not resolve the issue, contact Apple.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

Maybe you are looking for

  • Cannot send email from Exchange 2007 to Exchange 2013 - Coexistence

    Existing Exchange 2007 SP3 1 MBX, 2 CAS/HT, 2 ET servers. I have added an Exchange 2013 server with MBX/CAS role. Email will flow from Ex2013 server no problem.  Mail from Ex2007 systems cannot deliver to Ex2013 boxes, it dies in queue with a 4.4.7 e

  • Message type and idoc type

    hi all, i'm working on integration between sap and non sap.can anyone please tell me the message types and idoc types available for Funds Management and Project system modules.it will be of a great help,full points will be alloted imm.

  • Windows XP on boot camp. FAT32 or NTFS?

    I am going to install Windows XP with boot camp. (Until Win7 support comes out). What should I use? FAT32 or NTFS? I tried both but I don't like FAT32 because of limited storage space (32gb). I tried NTFS but It did not read my USB or Disc.

  • Abstract classes and vectors

    hey i don't understand this situation.... i have an abstract class called 'Item' I then have a class called 'Ball' which extends Item and a class called 'Box' which also extends Item they are then stored in a class which extends the vector class call

  • Multiple Instances of Various Adobe Products

    I have noticed that I have multiple installs of several adobe products, CC and CC2014.  I attempted to uninstall the CC version of Acrobat but apparently it uniinstalled both versions and now I have to go back and reinstall the CC2014 version.  My ha