RE: : "AEC-6880 BIOS not install" error - fixed for me.

To anyone receiving the POST error : "AEC-6880 BIOS not install" on a 645Max2, my problem was a dead Maxtor Plus9 disk.  
Both disks in the mirror array were brand new 80GB parts, within three days i was getting the BIOS not installed error instead of the Acard utility telling me one of the disks was bad.  Pretty major ehh?!!
I removed the dead disk and managed rescue the data from the working disk, so don't reformat them before you've checked that both disks are good!
Hope someone out there finds that useful.
Ben

Welcome to the Club! Got the same Problem and had a really hard time reaching the Customer Support because they were down due to maitenance! Just wrote to their experts chat and hope to get an answer in this life!
I tried to authorize my Computer and eBookreader with a new Adobe-ID, but it says I've done used this ID too often, even though it was brandnew! Can't copy my just-purchased eBook because "Copying is not allowed".
I hold my thumbs for you that Adobe solves this Problem fast enough. Other ways I'll sell my eBookreader and buy the Kindle-Reader from Amazon and say GOOD BYE to Adobe!

Similar Messages

  • Bios not install error and Raid Configuration not showing physcial HDD in Lenovo

    Is this a SATA hard drive by any chance?  Sounds like you have an Adaptec SCSI controller, but no hard drive attached to it.  Are you booting an install DVD of some sort?

    Bios not install error and Raid Configuration not showing physcial HDD in Lenovo RD 120 Server (New)
    updated bios still same error
    and at array configuration it is not showing any hard disk
    hard disk utility it is showing hard disk 
    we are trying to install OS with single hard disk in Lenovo RD 120 Server
    This topic first appeared in the Spiceworks Community

  • "BIOS not installed" error message.God help me!

    Greeting all. I was so damn exited about getting this NEO875P-FI2SR board. I am beginning to wonder if the effort will ever be rewarded. Got everything plugged up tonight and fired it up and it says "BIOS not installed". I reset CMOS a couple of times and loaded the default set of parameters in the BIOS setup. Same stuff. I have been searching the forum fo other folks that have had this same issue, but no luck. Has anyone had any experience with this particular error message? Thanks guys.
    Sam

    I don't have your motherboard, but I have a question
    Is the BIOS NOT INSTALLED message you are getting being showed after it displays FASTRACK.
    Also does your computer still start Windows ??????
    If so, then the message you see you do not have to worry about, I think it has something to do with RAID and no devices connected to it.

  • Cannot embed pdfs in MS Word doc which are PDF Version 1.3 (Acrobat 4.x) [This is associated with Adobe Reader 9]. Getting 'program not installed' error.

    Cannot embed pdfs in Word doc which are PDF Version 1.3 (Acrobat 4.x) [This is associated with Adobe Reader 9]. Getting 'program not installed' error.
    Pdfs with other versions are okay:
    Tested successfully with Adobe Pro 9 (Version 1.5 (Acrobat 6.x)), Reader X (Version 1.4 (Acrobat 5.x)) and XI (Version 1.6 (Acrobat 7.x))
    Also cannot open embedded pdfs which have been embedded with this version (getting a similar error).
    Importantly I have removed/disabled all security options in Adobe Reader, following numerous internet suggestions from Adobe and elsewhere. This does not fix the problem.
    Currently the work around is to re-save the pdf with something other than Adobe Reader 9 (so the version updates), but we would prefer not to do this for all the old pdfs we have.
    Thank you,
    Louise.

    Could you please email me the document on which you are seeing this issue at [email protected] ?
    Please mention the forum thread link as well in the mail for the reference.
    Thanks,
    Atul

  • Beta cs6 will not install error bridge running but it is not running

    Can not install cs6 error close bridge but bridge is not running

    I am running windows 7, I check task manager and bridge is not running
    Date: Mon, 26 Mar 2012 19:36:19 -0600
    From: [email protected]
    To: [email protected]
    Subject: beta cs6 will not install error bridge running but it is not running
        Re: beta cs6 will not install error bridge running but it is not running
        created by Howard Pinsky in Photoshop CS6 - View the full discussion
    Which operating system are you running? It might still be running in the background. You may want to check your Task Manager or Activity Monitor. Or better yet, if you feel uncomfortable with that, try logging out of your user account, then back in. That might kill any stray processes.
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4293603#4293603
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4293603#4293603. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Photoshop CS6 by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Updates will not install error 1

    updates will not install error 1

    Error Code 1: "Failed to install" | Creative Cloud Desktop : https://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html

  • I could not install the upgrade for iTunes and Error message said "can't start because MSVCR80.dll is missing" Reinstallling has not helped. Is it Apple's fault?

    I could not install the upgrade for iTunes and Error Message said " Can't start because MSVCR80.dll is missing". Reinstalling has NOT helped. . Is the fault with the Apple iTunes upgrade?

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.

  • TIF limitation throws up 'codec not installed' error

    How odd - PRE7 produces a 'codec not installed' error if I try to import a .TIF file of 600dpi resolution. But it works fine if I resize the image to 300dpi resolution.
    I'm posting this for the benefit of anyone else who might encounter this inappropriate still  image error.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children

    Because DPI/PPI is ignored in Video, I am surprised at this. Guess it's ignored - up to a point.
    Now, the "usual suspects," when one has an issue with still image Import are:
    CMYK (actually, almost any Mode but RGB)
    16-bit (or now 32-bit) images
    Progressive JPEG's
    PSD's with a very small Layer (I've only seen this in PrPro)
    Images with a combo of Vector Shapes, that are not Rasterized in PS - though some of these work. NLE's just do a poor job of Rasterization)
    Images above 4096 x 4096 pixels
    Guess that we can add another - higher DPI/PPI, at least 600dpi. As a habit, I have Actions that handle Mode, Bit-Depth, and will set the PPI to 72, so had never encountered this. At least now we are armed with an additional attribute to ask about.
    Thanks for pointing that out.
    Hunt

  • Question: i upgraded to Lion and now itune upgrade will not install (error message appears)

    i upgraded to Lion and now itune upgrade will not install (error message appears)

    iPhoto needs to be upgraded in order to work with Mavericks. You can do that via Software Update or the App Store.
    The iWork apps are free with a new iOS device since 1 SEP 2013. They are free with a new Mac since 1 OCT 2013. They are also free with the upgrade to OS X Mavericks 10.9 if you had the previous version installed when you upgraded.
    Upgrading iPhoto does not involve your iPhoto Library. Your photos will still be there. But it never hurts to make a backup first.

  • BIOS NOT INSTALLED message on boot

    Help! I have just put together a new (used) system with a P4 2.88 Ghz cpu & MSI 875 NEO FSR mainboard and I get the message 'BIOS NOT INSTALLED' on boot immediately after the first line. (before POSTS?) ANyway, it doesn't seem to stop or impede the system in anyway but is just an annoyance. Any advice would be very welcome. Thankyou, Chris

    Like pharao said, you need to go into the BIOS & disable the Promise chip if you're not using it.  I used to get the same message & it puzzled the bugger out of me.

  • Itunes not installed error 7 126

    Itunes will not reinstall on Win 7 -
    Received error message when updating machine - requested I reinstall itunes.  Downloaded a fresh copy, uninstalled old copy, restarted machine, installed new copy and continue to get Itunes not installed - Error 7  126 
    I bet this is common - couold use someone to point me to the answer
    Thx

    Hello dukehello,
    The article linked below provides some useful information and steps that can help resolve this error.
    iTunes for Windows: "Error 7" message when opening iTunes
    http://support.apple.com/kb/TS3074
    Cheers,
    Allen

  • ICH5R - bios not installed?

    Sorry if I am going over old ground but I assume I get this message on boot up as I have no Serial ATA devices? It saus 'No devices found' then 'BIOS not installed' and boots just fine.
    Just want to make sure this is not a problem with the board?
    Thanks.
    Matt.
    ps..bios is v1.4

    You really should use the search function of this board before posting. The boards are full of the same questions asked over and over. This would be a better approach then asking the question again and then saying your sorry. 8)
    It would also really help if you posted how many, the type of drives you are using(PATA or SATA), whether they are set up RAID or not, and finally how are they connected.
    With out this info it is hard to give you a precise answer but I will take a shot. :P
     If you have no devices attached to the Intel SATA disable it in the bios. It is under the integrated peripherals section "On chip IDE configuration".
    If you have a PATA drive or drives connected on the Promise controller disable SATA on the controller.
    Double check that the promise controller is set for the proper mode "P-ATA only"
    Just look through the bios settings boot section carefully.
    Post more specific info on your configuration if you require further assistance.
    Polecat out

  • Project not installed error message. What does it mean?

    Why do we get a project theme not installed error massage when using iDVD?

    Probably because the themes are not installed or iDVD has broken the link to the themes' location. Check in the HD/Library/Application Support/iDVD folder to see if the themes are there. If not then check in your ~/HD/Library/Application Support/iDVD folder.  If they are there then copy them into the HD/Library/Application Support/iDVD folder. Repair disk permissions and reboot.
    If that doesn't help you'll have to reinstall iDVD from the disk it came on. To do so you'll have to delete the current application and all files with "iPhoto" in the file name with either a .PKG or .BOM extension that reside in the HD/Library/Receipts folder and from the /var/db/receipts/  folder,
    Click to view full size
    Then install iDVD from the disk it came on originally and apply all necessary updaters.
    OT

  • BIOS not installed? Devices not Found?

    Pentium 4 3.0GHZ
    Kingston 2x512 Dual channel
    420 Watt power supply
    80 Gig maxtor Hardrive
    When the system boot up I get a message stating:
    Devices not found
    BIOS not installed
    I have no problem getting into the BIOS settings and making changes except the ratio for the CPU is Locked which I also can seem to unlock.
    Other then that my system runs fine and Windows XP work.
    I know the system is running at 200x15 because the Core Center.
    Any ideas about the BIOS or the LOCKED issue.

    itve told you in the bios section allready

  • Bios NOT installed

    Built up machine last night the but i get a message saying no bios installed and then it reebots this goes into a cycle, i can get into setup and found that the hard drive & dvd/cdwriter has been located. i have disabled promise & removed the d bracket. this has made no diference. i have looked through the stickys so if i have missed this then i am sorry could you please help as i have now a bad headache.

    i have tried the clear cmos option, made no diference unfortunatley as did swapping the memory, as i said the memory is 266 an dthe cpu is 800fsb is ther a ratio i should check or a voltage i should change, although it says bios not installed i can get into setup and alter the bios from there. headache not any better lol

Maybe you are looking for

  • Satellite L-555 Tochpad and Wireles adapter have stopped working.

    Hello This all started when I downloaded AOL's 9.7 program. The installer downloaded and started. Windows 7 requested permission to allow AOL to make changes to the computer. I clicked yes. 5 seconds latter the computer locked up. All functions would

  • How to chage logical system name SYSTEM ECC6.0

    Dear Experts, We need one help, in one of our production client which is on ecc6.0 and on oracle. in that when we are executing transaction rsa1. its giving error " logical system name has been change for this system ", then later on we have found th

  • Performance of report & uni

    Hi all How to improve Performance in business object In universe designing  and Report development

  • Having problems changing my verizon prepaid to a new device

    I'm having problems changing my Verizon prepaid phone number to a new device.

  • Broadcasting issue

    Hi all, We are having a scenario where user will get some error reports through broadcasting once in a week. Last week, the same error report is going to the users multiple times. Is there any way to restrict the report to be sent only once to the us