Re: After installing W7, have no more sound

Hello,
After a clean install of windows xp, i had no more sound, so i thought perhaps with installing W7 it will work better, but no sound...
I tried already lots of things as i found on different forums but without solving the problem...
The FN + ESC is not doing anything
Please help me with this, thx a lot

Hi,
thx for the fast answer,
yes i did try this but i dont know what Toshiba Value Added Package utility is... where can i find that.
i tried without this Toshiba Value Added Package utility, and when it rebooted i had a red cross on the sound icon next to the clock, after playing a song in wmp the cross went away...
No there is no exclamatiom mark in the device manager
Message was edited by: krusty

Similar Messages

  • After installing Mountain Lion.  Under sound, where it says select an output device, it say no output devices found and there is no sound.  How do I fix this?  I have reinstalled the os twice and still the same.  I have also repaired permissions.

    After installing Mountain Lion.  No sound. Under sound, where it says select an output device, it says no output devices found, and there is no sound.  How do I fix this?  I have reinstalled the os twice and still the same.  I have also repaired permissions.

    Try resetting the PRAM and SMC...
    PRAM Reset:
    http://support.apple.com/kb/HT1379
    SMC Reset:
    http://support.apple.com/kb/HT3964
    Hope this helps!

  • After installing Flash Player, I lost sound on Youtube and other sites.  How do I fix it?

    After installing Flash Player, I lost sound on Youtube and other sites.  How do I fix it?  I still have sound on some apps.

    To help troubleshoot we'll need the following system information:
    Operating   system  
    Browser  
    Flash   Player version
    When reporting issues with video or audio, it's also helpful to get your system hardware and driver details.  Instructions for finding this information can be found here:
    Windows  
    Mac
    Finally, sometimes video and audio problems are caused at a lower level and not directly related to Flash Player.  I recommend trying both of the links below to see how they perform.  If the problem exists with both, then Flash Player is most likely not the culprit as the HTML5 video link does not use Flash Player when playing.  You can verify the use of HTML5 by right clicking the HTML5 video and looking for the words "About HTML5" at the bottom of the context menu.
    HTML5   video  
    Non-HTML5 video
    Thanks,
    Chris

  • In app store some applications are of very small size like 15-20 Mb and after installing them they become more than 100 mb. how to determine their actual size???

    in app store some applications are of very small size like 15-20 Mb and after installing them they become more than 100 mb. how to determine their actual size???

    The app store size is probably just the software, while the size on your iPhone includes data.
    You can determine the size on your iPhone by looking at Settings > General > Usage.

  • After upgrade to iOS5.0.1, most of my apps have no more sound.

    My apps worked fine with iOS5 but after the upgrade to 5.0.1, all sounds and music associated with my apps have disappeared. The videos and iPod work fine so that means there's nothing wrong with my iPad. The same apps on my iPhone work fine. Is there a reason for this?

    Try "resetting" the device...
    Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.

  • I bought special items for app "Talking Ben for iPad" and after update I have no more

    How can I retrieve it?

    Hi,
    It seems i have same problem like you. May i know the sollution for this issue, please?
    Thank you.

  • Sound missing after installing windows 8.1 pro.

    hi. i have a problem. after instaling windows 8.1 pro , sound is missing. i in device manager everything is fine. instaled every driver.
    product name:  laptop hp 620.
    a day before this, i had windows 7 and everything worked fine.  tried everything. i dont know what else to do. if i dont find a solution then i go back to windows 7 ((

    Hi:
    The only suggestion I can offer would be to try a W8.1 IDT audio driver...
    http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5229457&sp...

  • No sound after installing new iphone software

    sounds is no longer working after installing new iphone software.

    Which sounds are not working, the ones on your Mac or the ones on your iPhone?
    Allan

  • Computer slows down and locks up after installing Xtreme Mu

    I recently upgraded my Audigy 2 to the new Xtreme Music soundcard. The music sounds great!? Before install, I uninstalled all drivers from the Audigy 2. Now, my computer behaves differently. Before the login screen (Windows XP), my video flashes multiple colors for about 2 seconds. After logging into Windows, applications have slowed down (this is after installing the drivers for the sound card and updating the software to the latest from the website). For example, Email took some time to come up (outlook), and then a word attachment refused to come up. IE took considerable amount of time to launch. This is after running the computer with the sound card for a week.
    The problems aren't consistent. I returned the card, and the salesman asked if I plugged in the external power (floppy dri've connector). I read the instructions, and they did not state to do this, but I will give it a try. I swapped the card for a brand new one and brought it home. This time, I plugged in the external power. Same symptoms, if not worse. It is sporadic, and sometimes worse than others.
    This morning, my computer was working extremely slow opening IE or Outlook and reading email. I pulled the sound card and all is great again. Bummer!? I really like the sound this card produces. My fear is, will ANY X-Fi card do this or just the Xtreme Music?I have an ASUS P4P800 Deluxe (onboard sound has always been disabled). I didn't have any problems with the Audigy 2. 550W power supply, Gig memory, Pentium 4 2.8 GHz processor, and and ATI X600 video card. No other cards are installed in the system.

    I tried it is 2 separate slots. Same symptoms. I am looking to see if it is a power issue (not enough juice from a 550w power supply), or if there is a conflict. I still have the creative drivers and software loaded without the soundcard installed and no problems (So I'm ruling out the creative sound software).

  • I dont recall when I have been more frustrated....  the "loops" I am in on the web for support are endless.  After downloading Yosemite on my Mac my CS6 no longer works.  On your support web site you state the following for downloading and installing prev

    I dont recall when I have been more frustrated....  the "loops" I am in on the web for support are endless.  After downloading Yosemite on my Mac my CS6 no longer works.  On your support web site you state the following for downloading and installing previous versions of apps, such as CS6 " 1. open CC for desktop and go to the apps panel (no link is provided so I explored until I could download a trial version of "application manager" as that was required.  When I attempted to open it to download "Previous Versions" I could not.  I have my license number, my CS6 will not open in Yosemite and after over 2 hours I am really frustrated....  Rich@

    When I go to that link, download and then attempt to install I get the message "Webe encountered the following issues, Installer failed to initialize.  Please down load Adobe Support Advisor to detect the problem"  I then select the link "get adobe support advisor" that takes me to a site that describes a better support link since the one I have been sent to is no longer available.  I then go to that site and am told to go to CC for desktop apps, that requires me to download CC...  I don't want CC.. just want to have my CS6 PS work again....  so frustrating...

  • My iphone 4s is no longer making sound when i have an incoming call or message after installing ios7.... any help?

    My iphone 4s is no longer making sound when i have an incoming call or message after installing ios7.... any help?
    It still vibrates but no calling sounds or message sounds. It's not on mute and the speakers are working... I can hear music etc.
    Oh yeah no keypad noises either.

    Same thing has happened to me. I have tried every trick that's been posted here. I just ran out of options. Galaxy phone is starting to look better by the minute.

  • After installing an update I am no longer able to hear sound out of my speakers. A red light comes on where the headphone jack is. I have already attempted to trip to switch with a wooden toothpick in the headphone jack but have not had luck.

    after installing an update I am no longer able to hear sound out of my speakers. A red light comes on where the headphone jack is. I have already attempted to trip to switch with a wooden toothpick in the headphone jack but have not had luck.

    Have you gone into system prefs nad made sure that the headphone port is set to audio out. And not audio in.
    Also make sure that you are selecting built in speakers for your audio output.
    If that does not fix it try doing a Pram reset.
    Shut your mac down.
    Press the startup button.
    Hold down the following keys. Command Option P and R. Wait till you hear the chime 2 times. Then let go. See if that fixes it.

  • No sound after installing flash player 11.3.300.262, have mozilla 13.0.01, working fine with flash player 11.2.202.233

    Have no sound after installing flash player 11.3.300.262. Working fine with flash player 11.2.202.232

    hello, unfortunately this seems to be a bug in adobes flash plugin 11.3. please refer to the following forum entry on how to handle the issue or report the problem with your system details to adobe.
    http://forums.adobe.com/message/4483563
    https://bugbase.adobe.com/index.cfm?event=bug&id=3210964

  • HT4623 I have no sound on my iPad after installing iOS 7 tried everything even reset

    After downloading iOS7 I have lost all sound on my iPad, tried reset and just about every other settings but still silent - frustrated and ready to chuck it in the bin.

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
    If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/ts1630
    http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
     Cheers, Tom

  • No onboard sound- MSI k7n420 Pro after installing ATiI 9700 pro

    I'm not sure if this has been answered previously.
    I just installed an ATI 9700 pro on my MSI K7N420 Pro. Video card works great, but sound is absent after installing vid card.
    In device manager shows yellow marks on nforce audio codec interface and nforce midi Uart. The former says: NtKern.vxd device loader for this device could not load the device driver. THe latter says: This device is either not present,, not working properly, or does not have all drivers installed.
    I tried reinstalling the drivers using the windows files present in system, but nothing changed.
    I'm not sure what to do next.
    Any help would be appreciated.
    System hardware:
    MSI K7n420 MB with onboard sound & video, ver 1.05
    ATI 9700 Pro video card
    512 MB ram pc2100
    40 GB western HD
    win98

    Hi,
    Win98 - SE? Although this board (K7N420) works fine with Win 98 it can have driver issues (although, it's that long since I installed it - I can't remember what they were!). An upgrade to XP (Pro if possible) should be at the top of your Xmas list - then issues such as the one you're having should be a thing of the past
    The card will work with DirectX 8 but as far as I know the 9700 is fully DirectX 9 compatible - so you should really install it as it enables more features.  
    You can find your BIOS version on the initial boot screen!
    Have you any IRQ conflicts? - Check device manager.
    Is PNP OS enabled in your BIOS? if so disable it and see what happens. Also Enable APIC! (BIOS)
    Axel  

Maybe you are looking for