Re: After System-Recovery the Secondary Display (Beamer) will not work
Hello,
i had a problem with my Thosiba Notebook ! (Detail of System Name follows ... later)
First i saw that the Yahama Sound Chip was diabled (disapper) caused by Windows Update and i
found no way to recover / install the correct driver.
So i decided to ... give up with timewasting and Started the System Recover Process.
So after the Recover finish ... the sound was back and during the (Windows) Updating routine
... it' was disabled again, but this time i could install the new correct driver.
After i take back my installed notebock back to work (sound still working) i connect a beamer
to the secondary vga connection ... and what a suprise
the beamer shows NOTHING ... before this it still works
Has anyone a idea what could be the error reason ?
My System runs XP Home (recoverd and update to SP3)
The VAG is a GeForce G 400 (installed the driver from CD-Rom)
... i could not download the newest vga driver .. because it had an temp. problem with the Webaccess
... ... i look for the rigt ip-setup (just for info you)
If you need more details please ask ... i'll answer so good i can
Thanks to all how read this (and hopeful help me out)
This post comes from Germany ... you could replay in english !
The reason why i post the model name later , is that i'm now at home , the notebook is at work.
Yes, i do the monitor selection by pressing FN + F5 ... this what make me confuse
before the recovery it works , that display switch correct between int. LCD, CRT (Beamer) or LCD+CRT.
but now the toggle did not work, but the vga driver should almost the same as before (i see no different)
... for understanding .. when i do toggle i see on LCD the option windows wich monitor i want (i mean the pop-up)
but the beamer does not start correctly the display.
I'll try to put a new driver (form the support download site) on the system .... but i believe it should already works with
the driver it has now , the new driver will give me just a bit better performance , right !?
Another thing i forgot (but is a secondary problem) is that when i want to see a DVD at the laptop
and i'll show it with the beamer it works only when i switch to CRT (Beamer) only , if i do not
the DVD shows only on LCD correct if both are active i see on CRT only a black display window where
the DVD should appear ... i can live with that, but it seems not normal ... the manual or FAQ's don't say anything about it ..
Similar Messages
-
After last update the split keyboard option is not working and side switch button option works opposite for mute and rotation lock.
Hi
A long story about your issue... I think the reason of this is why you have deleted some registry keys. If you delete something in the Windows registry you should really know what you do. You can damage the complete Windows system!
So I think this is the reason why the keyboard doesnt anymore.
In the user manual I have founded that the CD-ROM booting option is only available with optional optical disk drive.
So for me it sounds like that your USB CD drive is not compatible to the notebook -
After the update my earbuds will not work for my music BUT will work fine for phone conversations
After the update my earbud will not work for music BUT will work for phone conversations
this might sound dumb but how do i do that because that is probably the problem
-
My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work. I tried to restore it again and charged it in three different locations with different cables. etc but nothing. Suggestions?
- After charging for 1/2 hour or so, does iTunes see the iPod? If yes, restore the iPod from backup.
- If no, se if placing the iPod in recovery mode will make it visible so you can restore the iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore -
How can i upgrade my iPhoto 7.1.5 to a newer version? the download 8.02 will not work as i need 8 and that isn't available on download on the site?
Thanks xYou can upgrade to iPhoto '11 with OS X 10.8.5 by purchasing an iPhoto '11 DVD from Amazon, eBay or other source - or you can upgrade your OS to Mavericks for free if your system meets the requirements and then purchase the upgrade to iPhoto '11 version 9.5.x from the App store - in either case backup first in case of problems
LN -
Ok so I use an hdmi connector on my iPhone 4S to watch netflix. But after I updated to iOS 7 it will not work my tv doesn't receive a signal. Does anyone have any insure to this please help .!.!.
The 8 pin Lightning connector can only output 720p and lacks all iPod Out functionality unlike the full iPod Out functionality and 1080p that the 30 pin connector has and I suspect that they are coding iOS 7 specifically for the new devices which have severely reduced abilities and perhaps skipping adding the code needed for 30 pin devices to use their functionality with HDMI, etc.
-
I purchased Adobe photoshop elements II and Adobe premiere elements II. They are both on one disc. My computer crasded and I had to reload Windows. I only have one serial number and it only works with photoshop II. The same serial number will not work for Premiere. I dont have any other serial numbers. What do I do???
Static_Unit
I am getting a bit concerned about what is happening in your situation. Yesterday you posted your question in at least two different forums, one of them being here in the Premiere Elements Forum.
Don't Have Serial Number for Premiere, Only Photoshop?
Wherever you posted, the reply was to contact Adobe via its Adobe Chat. It is the only one who can sort out this matter for you.
In the thread cited above I offered to help you with the difficulties that you were having visualizing the Adobe Chat in its web page. I was waiting for your follow up on that in the above thread. Instead, I find your same question in a new Adobe Premiere Elements Forum thread this afternoon with no refer the prior threads or prior recommendations given you.
I will also mention again...when you buy the Photoshop Elements and Premiere Elements bundled in one packaging and with installation files for each on the same installation disc, each program has its own serial number. The Photoshop Elements serial number does not work for Premiere Elements and vice versa. The serial numbers are on labels on a box which houses the installation disc envelope(s). So, if you purchased both programs and found the Photoshop Elements serial number, then the Premiere Elements serial number should be in a label right underneath the label with the serial number for Photoshop Elements. I recall writing this in your yesterday's thread on this matter.
The moderator will no doubt be along shortly to close or delete this thread. So, just in case, please bookmark your yesterday's thread cited above so that we can continue this communication which is trying to help you.
Thanks.
ATR -
The second Earphone jack will not work. My DV6000 is only one month old.
The second Earphone jack will not work, but I get static when I plug my earphones into it. The other jack works ok. I need help in fixing it. My DV6000 is only one month old.
This question was solved.
View Solution.HI,
Robert96 wrote:
The second Earphone jack will not work, but I get static when I plug my earphones into it. The other jack works ok. I need help in fixing it. My DV6000 is only one month old.
One of the jacks is for audio in and the other is for audio out. Some select versions have an S/PD/F jack. Chances are the reason you are getting static is that if you plug an earphone into a microphone jack it will attempt to behave as a microphone. It will not operate properly.
So..a recap. There is only one earphone jack
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
atleast once in a week the slide to unlock will not work in my iphone 4 and this is happening from the day i have upgraded to ios7. to access my iphone i have to a switch off and then switch on. really frustrating never expected this from Apple.
Hello sivas_live
Try out the troubleshooting steps in the article to resolve issues with your touchscreen intermittent response.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
Regards,
-Norm G -
Since updating to ios 7 my camera on the back of phone will not work,
I updated to ios 7 yesterday and now the camera on the back of my 4s will not work, it freezes, i downloaded other camera apps but still no joy, the camera on the front of phone works fine but the rear is gubbed, can anyone help or is this a case of waiting for update to fix the bugs and if it is why oh why was this update released when faults were known
hello,
my 4s was in os6 and when os7 first released, i have updated it. during update from os6 to os7 after 98% my wifi got disconnected and then phone automatically restarted. since then my back camera is not working. front on is working perfectly. after that i reinstall os7 properly following step by step procedure but no positive result came out.
then i tried to change the camera with a new one but still with new camera the problem is same. then they used my camera in some other 4s and it is working fine. now i dont know what to do.
right now using os7.1.2
please advise.
Salman -
I have a new MacBook Pro and I'm having trouble with some of the Help sections. I want to rearrange the order of my photo's within an Event. I have followed the directions but it will not let me do it, what am I missing? Thanks for any tips.
Are you talking about iPhoto? If you are please post this in the iPhoto forum, thanks!
-
How can i load sibelius scorch, before the software update it worked well,now it will not work, even re down loading it will not hold, please help?
That would appear to be a Mac program, so posting here in the iTunes Store forum isn't likely to get you any useful advice. If this support article from Sibelius doesn't help:
http://avid.force.com/pkb/articles/en_US/FAQ/en362435
I'd suggest asking in the Sibelius forums or contacting Avid/Sibelius support.
Regards. -
Tecra 9000: After SP2 installation the Yamaha sound driver does not work
Hi,
I own a Tecra 9000, with a Yamaha AC-XG sound card.
The problem is that since I installed Windows XP with SP2 included, I lost my sound.
I know also that Toshiba is aware of this situation and they have managed to post a solution for it. I've tried this solution:
Detail:
The Yamaha AC-XG driver uses PortCls function for checking the operatingsystem version. XP Service Pack 1, PortCls function is changed, then the Yamaha driver cannot get operatingsystem version correctly. The operatingsystem provides the version for Windows 95. Therefore the Operatingsystem has a blue screen. Therefore Microsoft added the workaround and illegal drivers are blocked from working on SP1. This issue also happens Windows XP SP2.
Yamaha already provides the fixed drvier to Toshiba. The fixed driver version is the following;
yacxg.sys 6.13.10.2152 with software synthesizer
yacxgc.sys 6.13.10.3152 without software synthesizer
How to fix this issue:
Install the fixed driver on a system before/after installing Windows XP Service Pack 2.
Install steps:
(1) Unzip an attached file on your hard disk.
(2) Run SETUP.EXE
(3) Click the Next button.
(4) Choose "Yes, I want to restart my computer now" and click Finish.
A toshiba engineer told me that first of all I needed to install the old driver "5.12.01.3141", and it worked out ok, but still no sound.
And then he told me to install the version "6.13.10.2152", but this went wrong. I've got the error message "Driver was not installed".
I already tried lots of different drivers, including generic and yamaha drivers.
Please tell me a good solution for this issue if possible.
Thank you very much,
HugoHi Hugo
It seems today is your lucky day ;)
Thanks to Toshiba because the Toshiba computer knowledge base is a really useful area and I have found many useful document and solutions!!!
I found also a solution for your tiny issue ;)
As you said the problem is the Microsoft service pack 2. The sound driver makes some troubles after the installation of SP1 or SP2 and therefore the update is necessary!!!
Please take a look here:
Windows XP Service Pack 1a or Service Pack 2 incompatible with existing Yamaha sound driver
http://ftp.toshiba.ca/support/techsupport/tsbs/all/-TSB000805.htm
Good luck -
After system re-install Acrobat 8 Prof does not work
I had to install my Windows 7 pc. After this nasty procedure I cannot start Acrobat 8 Prof any more, window turns grey. Serial no. is available and no. of activations are not exceeded. Has anybody any idea what went wrong and how I can make use of Acrobat Prof again?
Have you tried a repair from the Start>Control Panel>Programs & Preferences? If a repair will not do the job, then you my have to reinstall as a last result. If you do that, be sure to deacctivate, uninstall, remove the Acrobat folder if any parts left, run http://labs.adobe.com/downloads/acrobatcleaner.html, reboot, reinstall, and run updates. If a 64-bit system, the updates are an important part. If needed, they can be downloaded from http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows and installed in order.
During installation, don't forget to be logged in as the administrator and disable anti-virus. -
I buy iphone5. When the battery get over then after I recharge the battery it's will not switch on
Hello
I buy iphone5. When my phone battery will get over then. After I put to recharge the phone will not switch on why it is happen to my phone please help me.
Thanking you
OmarReset the device by pressing and holding the home and power buttons until the white Apple logo appears.
In the future, post in your native language.
Maybe you are looking for
-
Level of music uneven in slideshow
I made a long slideshow in iPhoto 6. After putting it in iDVD6 and burning a disc one of the songs plays at a very low level. How do I fix?
-
Read feedback for a podcast by users in another country?
I've got a podcast which shows up in iTunes, and I'd like to read the comments people gave me there. The problem is that I can only see comments from people in my own country unless I change the iTunes Store country (which can be done at the bottom o
-
Transferring iTunes to new Mac - several problems
I'm upgrading from an old MacPro, OS X version 10.6.8 to a new Mac Mini, version 10.10.2. iTunes versions 11.2.2 to 12.1.0. I updated iTunes on the New Mac, and registered the New Mac with the iTunes Store. I then connected the two Macs and trans
-
I need to figure out how to get into the creative cloud on my new laptop after having it downloaded on my old laptop.
-
My macbook pro didn't come with iChat. What do I do?!
I just set up my new macbook pro and I've been searching every place I can think of for iChat and I can't find it anywhere. Is this a mistake? Is "Messages" the new iChat? I'm really confused. How do I get my iChat?! Can I download it?