Re: After system refresh on oem windows 8.1, windows left deactivated
Hi
Hi , Thank you for visiting the HP Forums! A great place where you can find solutions for your issues, with help from the community!
I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your concerns with activating your Windows Key. Here is a link with help. One issue that happens that people change the hardware on the Notebook. If you need us, please use the following link to create yourself a case number, then call and it may help speed up the call process:
Step 1. Open link: www.hp.com/contacthp/
Step 2. Enter Product number or select to auto detect
Step 3. Scroll down to "Still need help? Complete the form to select your contact options"
Step 4. Scroll down and click on: HP contact options - click on Get phone number
Case number and phone number appear.
They will be happy to assist you immediately. Thanks.
I'm also having this same issue. Could you let me know how you got it activated? Thank you.
Similar Messages
-
After system refresh on oem windows 8.1, windows left deactivated
Hi, Some time ago I upgraded from windows 8 to 8.1, last week I suddenly got a corrupted spool driver which made my laptop unable to boot into windows, blue screen etc. So I did a system refresh in the recovery boot section of windows. (System refresh sets your pc back to factory state without deleting your personal files. ) The refresh went fine, until I had booted into windows again, only to discover my OEM windows 8 was not activated any more!! To make matters worse, the product key is recognized by windows, but it tells me the activationserver blocked my productkey!! I was flabbergasted, I'm an IT guy myself and nothing seems to work to undo this. Tried to call microsoft, they refuse to even pick up the phone so i figure i'll come overhere. Since my laptop is an HP Envy 17-j006ed. How can I reactivate my Windows again???!!! MJWings
Hey MjWings, Please use the following link to create yourself a case number, then call and it may help speed up the call process:
Step 1. Open link: www.hp.com/contacthp/
Step 2. Enter Product number or select to auto detect
Step 3. Scroll down to "Still need help? Complete the form to select your contact options"
Step 4. Scroll down and click on: HP contact options - click on Get phone number
Case number and phone number appear.
They will be happy to assist you immediately. Thanks.
Thanks. -
Logical System Conversion after system refresh failed
Hello,
Logical System Conversion after system refresh couldn't complete as the printer was locked. This job was run in the background. In SM37, the job log of RBDLSMAP shows as job finished, but it took only 40 seconds. Now I see that the logical system got changed(Converted) in the client settings scc4 but I know that this client being a production client and would run for couple of hours. Here is the job log information.
02/18/2009 16:09:33 Job started 00 516 S
02/18/2009 16:09:33 Step 001 started (program RBDLSMAP, variant &0000000000000, user ID ABCD) 00 550 S
02/18/2009 16:09:33 Output device PRN1 is locked in the SAP system PO 349 I
02/18/2009 16:10:19 Job finished 00 517 S
When try to rerun bdls again, it shows that it is already available and it says "The new logical system name is already assigned to the current client".
Any suggestions on this?
Thanks,
MaheshHi ,
Rerun the BDLS again as this took very little time.
When you try to run again it popsup message saying it already exists just delete that and again put the Logical system name and run it will run that time.
May be while scheduling the job you gave for spool I am not sure why is it looking for Printer which is locked.
Thanks. -
SAP License issue after system refresh.
Hi,
After system refresh, refreshed system has License info of source system. When trying to apply license from unix, it gives below error, saying system number is incorrect to apply new license. Looks the system number of source system is causing issue. I checked, there is no data in MLICHECK table. I could see some info in "saplikey" table. System is 700 system.
sidadm> saplikey -install "/home/SID/sid_multiple.txt pf=/usr/sap/SID/SYS/profile/SID_DVEBMGS01_sapsidci
This system's system number is "000000000710287641", but there is a license key
for system number "000000000711311441" in file "/home/SID/sid_multiple.txt".
sidadm>
Thanks.First check whether you have deleted all invalid licenses?
use below command to delete invalid licenses
sidadm>saplicense -delete
And apply new license based on new hardwarekey with below command
sidadm>saplicense -install
*I think there should be some invalid licenses lying in your system
Regards
Nick Loy -
After System Refresh Variants missing
Hi,
We have used Export / Import method to build QAS system from production
ABAP export file.
After System refresh we got the same Production client with all
configurations, Variants, Object including data.. Which is Perfect.
But, as per our business we don't want to use the same production
client number in Quality System., so we done Cliet Copy to copy to
different client (ex: Client 200) using SAP_ALL profile.
Question: But after client copy we found that some Data, Objects,
Variants are missing in the new client (200).
Ex: In Client 100 (Copy of production client) table T009 is having 10
entries, but after client copy in client 200 the same table doesn't have any
entry in that including standard and Z.
Please help me on this, how do I get clone / copy of 100 client
(original client)
Thank You,
RameshHi Ramesh,
Looks like your client copy didn't bring all the data and Objects, Did you checked logs, Is there any error message ? The client copy completed with all the tables ?
You can try Remote client copy method .
You can manually export the variants from the source client to Target client and you need to export the Variants from the table VARID, VARI, VARIT and VARIS.
You can use the below forum procedure to export and import variants.
how to export RFC destination to file in order to import it in an other sys
Since, not only the variants you are missing data and Objects, I would suggest for re-copy the client.
Regards,
Arjun -
Windows 8.1 will not activate on HP19-2113w after system refresh.
Everything was working fine on my PC. Then the other day it crashed and said there was a disk error and that it had to scan the whole drive to find the error. It finished scanning, but windows 8.1 would not load sucessfully. Therefore I did a system refresh thru HP recovery. After doing that windows would start up normally, but I lost my activation. When I tried to activate the response was "Key doesn't work try again later" or something like that. Kept trying, no luck. I thought it may have been an error with the system refresh, so I did the total system reset (after saving personal data). Now I am having the same problem with activation, and If I try to navigate the normal way to the activation screen, the screen disapears. I can get to activation using command prompt. but key still does not work. The key I am using I retrived from my BIOS data. Also, I ran the refresh and reset from the origional hard drive partition. I hope someone has a solution to this. Thanks is advance Bill
Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how your desktop computer will not activate after performing a system refresh, and I would be happy to assist you in this matter! In order to correct this issue, I suggest following the steps in this resource on Windows 8 product activation, which should help to activate Windows 8.1 on your system. Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards -
Cs6 windows 8 after system refresh....installer fails to initialize
hi i was using adobe cs6 suite on my toshiba windows 8 machine. i had a problem and refresh my pc.during the process, windows removed all my apps. after the refreshing, i am trying to install back my cs6 suite but anytime i try install i get this error that.."installer failed to initialize" i downloaded adobe support adviser and it said there was a bootstrapper error ans also a restart wass pending. i restarted several times even after a windows update. the proble still persistsplease can somebody help me
Moved to CS forum.
-
SDCCN settings after system refresh
Hi,
I am planning to refresh my TST system with PRD.
For post system refresh activates, what I have to do for SDCCN settings.
So that EWA will generate automatically.
Kindly advice.
Our environment Windows 2003, Oracle 10g2 and Netweaver 7.01
Best Regards
SatyaHi Satya,
Once you finish the QAS refresh then login to Solution and perrun a "managed system configutation wizard " and make sure to activate EWA.
After you finish the above said wizards sucessfully then schedule EWA under "EarlyWatch Alert Management" (SOlman SP10).
I'm sure this would assistance you to enable EWA in QAS .
Regards
Mani -
TMS, profiles after System Refresh
Hi All,
I have done a system refresh from PD1(old prod) to PRD(new prod) on new server.
I faced following problem after the refresh.
1. The instance profile of PD1 had many parameter.., after copying that in PRD, sap wont start. So I have commented many of those parameter from the instance profile of PRD?
2. After the refresh, since PRD doesnt have the transport request of PD1, how do I put those request to PRD?
I have the backup of \trans folder of PD1.
Regards
PrashHi,
Rename the file from \trans\buffer\HD1 to PRD worked!!!
-> the only concern if transport buffer is clean up in between then some request was missing in import queue of PRD.
zcsa/installed_languages = DE
this should be ED
zcsa/system_language = E is OK.
install/codepage/appl_server = 1100 -> this is for codepage installed on your application server
I get message like PXA_NO_SHARED_MEMORY occured
and SYSTEM_NO_ROLL occured..
-> are you using 32 bit OS ?
check Note 103747 - Performance: Parameter recommendations as of Release 4.0
Note 88416 - Zero administration memory management as of 4.0A/ Windows
also consider Note 129813 - Windows: Problems due to address space fragmentation
regards,
kaushal -
Lost Bluetooth after system refresh 15-4010nr
With the whole 8.1 upgrade debacle, I had to wipe my system and start fresh. Now I just realized I have no bluetooth on my laptop. I'm mostly sure I had it, but I cannot find it on the device manager. Any idea where I can download the driver?
ThanksHello DrKrizzle,
I see you're trying to find the bluetooth on your Notebook after doing a system refresh. I will try to help you with this.
If the refresh has reverted the Notebook to Windows 8, you may use this link for the driver which should enable the bluetooth for you again. Intel Bluetooth Driver. If you have upgraded back to 8.1 after the refresh, there is currently no driver listed.
You may also use the HP Recovery Manger to try to restore lost drivers. Using Recovery Manager to Restore Software and Drivers (Windows 8).
I hope this is able to help you, let me know how it goes.
Thank you for posting on the HP Forums.
I worked on behalf of HP. -
Unable to login in EP 6.0 after system refresh
After performing the system refresh of EP 6.0, completed the post system copy steps.
Imported the new certificated as well, when I try to login the page is getting refresh but remains on the same page.
please help me what could be the reason.Hi Abdul.
I think you have selected the Algorithm as RSA, which is the default one.<br />
Please change it to DSA and hope the issue will be solved.
Regards,
Satish -
Table structure changed in testing system after system refresh.
Hi Team,
Recently we underwent a system refresh in Testing System where the Testing data is filled with Production data. But now we find that in one table some fields which we had deleted they are again found there. The version history of table is also gone. The table object was under testing in testing system and after which it was supposed to be transported to production. I believe System refresh only means refresh of data and it has nothing to do with table structure. Please correct me if I am wrong. Please also let me know what could be the reason of those changes in table if it is not System Refresh.
Regards,
AmitI believe System refresh only means refresh of data and it has nothing to do with table structure.
Alas, you were wrong, after all table definition are data too, as program sources...
You have to re-import every transport request which was not yet transported to production in your test system.
Regards,
Raymond -
Adding transports to import queue after System Refresh
Hello All,
Every time we do system refresh from PRD to Sandbox as a part of post refresh activity we need to import all the transports which are in the import queue of PRD(which are not yet imported to PRD) to our Sandbox.
But its a tedious job, as in the import queue many old transports which are still not yet imported to PRD will b there.
So may b around 150+ transport requests in the import queue of PRD, which we need to add those manually from path
Extras---->other requests -
> Add. doing same for 150 times. cant even imagine dat work.
So my question is, Is there any way to get the replica of import queue of PRD to Sandbox.
Some where i read like transport buffer in the path /usr/sap/trans/buffer/<SID> of the system will have list of all transports in the import queue.
So can i copy dat file and replace SID with Sandbox SID and place it in the Sandbox under same path.
Please suggest or give me a correct solution.
Regards,
RaviThanks a lot for your reply.
I had read about using script like tp addtobuffer inorder to add the transports to the import queue some time back.
But forwarding transports is a new method i got to know here which even looks easy too. It would be great if any 1 tell me how forwarding works.
Also it would b fine if who all uses this method of forwarding to add transports to import queue do reply about any problems faced while forwarding requests.
Bcoz in our landscape , transport route is as below
Dev to QA and Sandbox then from QA transports will move to Production.
So after refresh forwarding Transports from PRD to Sandbox, how does this work. Please share your suggestions.
Regards,
Ravi -
False backup / archive alerts after system refresh
We have implemented CCMS on our systems. We recently refreshed our QTS system with a backup of production (PTD). CCMS is now sending alerts for backups and archives. It tells us that the backup and archive did never run.
I checked DB12 and found that there is no data in DB12. This is probably due to the system refresh.
Is there any extra post refresh step that we can do to prevent these false alerts (other than running a full online backup as post refresh step)? Is it possible to export the backup information (tables used by DB12) as pre refresh step and re-import them after the refresh?Kevin DK wrote:
Will it create issues if we do not delete tables SDBAH and SDBAD during the refresh?
No. BTW, tables are not to be deleted, just the table 'entries'.
Thanks -
Source System Problem after system refresh in RSA1 trx
Hi,
We have R/3 4.7 Test source system created in our SCM 2007 Test System. The source system check was OK.
The R3 Test system was refreshed with Production data few days back and now my source system is not working. When i perform Source System check it says:
BI unknown in source system
BI IDoc type ZSSB006 is not the same as source system IDoc type
I performed following steps in R3 Test system after its system refresh:
1. Created logcal system and created RFC.
2. Created port in trx we21.
3. Created partner profile in trx we20.
4. For the outbound parameter RSSEND, I had to create idoc type that should be same as in my SCM system i.e. ZSSB006.
5. Created idoc type using trx we30 as a copy of RSSEND and added entry in table EDIMSG. Now, i could also create outbound parameter RSSEND with idoc type ZSSB006.
After performing the above steps i also replicated the datasources for the R3 Test source system, but its still showing above error.
I also checked the RSBASIDOC table in SCM test system. It has correct entry for my source system. But there is no such entry in RSBASIDOC table in the R3 test system.
Someone pls help me.
Regards,
ChintanHi
Need to restore the All Dalaload connection settings after refresh the system which either R/3 or SCM.
RSA1 -> select the Source system -> Right click -> Restore , It'll ask the connecon paramters like RFC , method of activations. Then check the connection test of the Source system .
Check the the note for further info...
Note 886102 - System Landscape Copy for SAP BW and NW BI
Hope halp you...
Regards,
Sureshram
Maybe you are looking for
-
OS 9 No longer works on my powerbook g4
Hi, I can no longer use certain software because OS 9 no longer opens in my computer. Not sure what to do and I can no loner use my printer for example. I really need it for work please help. Thank you, Sandra
-
I did the update to 3.6.11 - After it started Firefox it would go to the requested site in the addressbar, but the page would be blank. I went to check for updates and it told me there was a problem in updating. It gave me this error message: Update
-
30Boxes weird time warp makes calendars impossible to update
I can't find anyplace else to ask this question, and I think that there are some iCal users here who use 30Boxes for its superior printing capabilities, so I hope somebody here has figured this out! A school has a web site that has a couple of google
-
I m using LV 6.0.2, the function "get variant attribute" does not work. I get nothing out of it: no error, no values. Any idea?! Actually I could need exactly the string that is shown in a variant indicator/control. e.g.: 'Cluster': cluster of 2 elem
-
Mac Pro 1,1 No Longer Restarts
My 2006 Mac Pro (OSX 10.7.5) no longer wants to restart. Currently, I have no problems shutting it down and then starting it up using the Power Button, but when I issue the Restart command (from the Apple Menu or software installers) the screen goes