RE Agent Lt was and still is marked FREE but I was charged $17.99.

I went to History and reported a problem. But I have not had any answer. Am I stuck with this app RE Agent Lt?

I think you have a valid complaint, but are going to have to work with App Store Support to get it resolved. Here's what i found
There are two iPhone app, RE Agent and RE Agent Lt. The main one, RE Agent, seems to show a $21.99 price all the time.
As for the other one, it depends first on how you search for it and also varies a little bit in outcome even in those searches. For example,
If you search for RE Agent, you find it there in the iPhone section and you also find RE Agent Lt there. Most of the time it shows a $17.99 price, but on a few searches showed FREE. No matter what it showed there, when you tapped on, i.e., proceeded to that app's individual page, it always showed $17.99.
If you search for RE Agent LT, then you get only it. It always showed a $17.99 price on the search page but on a few tries, when I went to the app's page, it showed a FREE there. The rest of the time it showed $17.99.
So, this listing is at least a little bit hosed. I suppose you could have ordered it directly from the search page when it happened to be showing FREE, or from some other page which might also have been showing FREE at the time, but I think it's clear that the price actually is $17.99 (not a huge discount from the full featured one, but you have to address that with the developer).

Similar Messages

  • Keynote and pages are now free, but why do i need to pay for them still when there now free?!?

    keynote and pages are now free, but why do i need to pay for them still when there now free?!?

    Users can obtain the iWorks and iLife applications free, if they purchased a Mac after the beginning of October 2013.
    Older Mac purchases require a paid purchase of these applications.

  • My Ipod 5th gen. has been detected by itunes, but could not identified properly, and its been charging for a week and still hasn't come to a full charged. What should I do?

    My Ipod 5th gen. has been detected by itunes, but could not identified properly, and its been charging for a week and still hasn't come to a full charged. What should I do?

    but could not identified properly
    Please clairify.
    charging for a week and still hasn't come to a full charged
    Sounds like you need a new battery.  Take the iPod Nano to an Apple store or an AASP.  Whichever is more convenient for you.
    iPod Repair Pricing

  • I need help my iphone 5c has been on charge for 5 hours and still has not turned on past the charging symbol, what can i do? (baring in mind i got this phone 2 days ago brand new.)

    i need help my iphone 5c has been on charge for 5 hours and still has not turned on past the charging symbol, what can i do? (baring in mind i got this phone 2 days ago brand new.)

    Do you see a lightning bolt near the battery , Battery is charging (supposedly(  IF  not return to where  you purchased it  (also make sure that the charger is on)  if still not charging with lighting bolt bring it back

  • Any way to set color for value in chart and still filter out values (but retain colors)?

    Is there any way that I can hard code a color into a chart and still filter out values?
    I have 5 divisions, each with a specific color.  I have put them into a stacked column chart and it looks fine.  My issue arises when I try to filter out some of the divisions.  The colors do not stay with the specified divisions.
    Ex.)
      Div 1 = Red
      Div 2 = Green
      Div 3 = Black
    When I filter out Div 1, this is what I see:
    Div 2 = Red
    Div 3 = Green
    I have tried standard delivered filter panel, and check-boxes using CHART_1.setDataSelection( )
    It seems like the color hard coding in the "additional" properties of the chart are not tied to the value, but are determined by sort order.  Any help is greatly appreciated

    Hi,
    There is one Possibility bu not By chart .
    It will look like chart but will use Text box .
    Lets say you have 5 Divisions & 3 Key figures .
    Then You need 5 * 3 = 15 Text box .
    Arrange them in 5 columns and 3 rows type of view .
    now .
    set fix width for all .
    set the height & position by coding
    You need to set this type of code for filter selection also .

  • How do you get the IPAD2 to charge? We have tried both ways and it never goes any higher than the percentage it is? We have plugged it into our computer and into an electrical outlet but does not charge. We got it brand new so it should work.

    We are having trouble getting our new IPAD2 to charge. We have hooked it up to our computer and no charge, we have used the outlet and still no charge. When we first connect it to an outlet it shows the battery but it immediately goes off and it is still at the same percentage hours later.
    Do you have any suggestions as to what we need to do to get it charged?
    thanks
    Connie

    Try resetting your iPad by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
    Then try to charge.
    It should charge from the outlet but may not from a USB.  Try a different cable or adapter.  If you don't have one, take it all in to Apple... the adapter may be defective.  You have a 1 year waranty.

  • Error 50 when downloading from itunes and cant get purchases downloaded but i am charged for them

    I used a redeem code and it downloaded the extras but the movie portion that appears to be a separate app states error-50 and will not download. I cannot delete the error file nor can I use the redeem code (one time use) to try downloading again.

    Temporary fix:  I am having the same problem, have been for months.  I get sporadic results, sometimes I can download, sometimes not.  You need to delete the download from the Downloads section in iTunes, then find your Downloads folder under Users folder (a few folders deep) and delete the folder for the item that failed.  Then go back to iTunes and check for new downloads, which causes the download to start over.
    Permanent fix: What I've come to understand is that iTunes does not like NTFS formatted hard drives.  I am downloading to a FAT32 formatted thumb drive and it is working flawlessly.  The way iTunes downloads a file is archaic to say the least.  It creates a file container the size of the file being downloaded, then downloads it in one long stream to the hard drive.  When the incompatibility arises with NTFS, the download fails and the files have to be deleted to start over.  In a day and age when we have p2p technology and Apple can't fix a simple download compatibility issue.  It's sad.  My advice... get an external hard drive, format it for FAT32 and redirect your downloads to that (under Edit, Preferences, Advanced).  You should be fine.

  • HT4993 my  iphone 4s turned off randomly and it wont turn back on, i tryed connecting it to my laptop to see if it will turn on and still nothing, i connected it to the charger, for about an hour and still nothing... why?

    so i picked up my brother from school today and on the way i was getting alot of texts and i read them but didnt reply, then i put my iphone on the arm rest thing, and when i came home, it didnt wanna turn on, idk why... it was around 80 percent battery and it wont turn on! i tryed connecting it to my wall, and nothing then i tryed to connect it to itunes, and nothing comes out, its already installed to my laptop but when i connect it, it wont turn on or open itunes please help!

    Connect to Wall Charger again and Reset, hold both home and power buttons for about 20 seconds until the iPhone begins to start.

  • Windows 7 Firefox worked and still works on all but my admin account where it gives me the message below:

    Gives me this message: Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features.

    In case anyone else has this problem I found the fix at:
    https://mail.google.com/mail/?shva=1#inbox/1308ed79fc4dfa29
    The file cert8.db in your profile folder may have become corrupted. Delete this file while the application (Firefox, SeaMonkey, etc) is closed.[1] To do this on Windows machines:
    Close the application by choosing File -> Exit.
    Open your profile folder in Windows Explorer.
    Click on the file named cert8.db.
    Press delete.
    Restart the application. cert8.db will be recreated when you do so.

  • I put itunes on my ipad in NZ and still have credit left but its only 72 cent and i cant buy anything with that. then i moved to aussie and bought itunes now that i try to load the itunes it does not work. it says i have to use the last credit but i cant

    please help!!

    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • My contacts are locked and I have shut the device off and still contacts are locked, but everything else appears fine.

    My contact app is locked on a contact, everything else is working fine.  I have shut the device off and onand no change???.

    Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank power On again in the normal way.] It is absolutely/appsolutely safe!

  • When i plug my itouch 4g on, it shows i still got 1gb free, but in the gadget it shows i've got nothing.

    I have already deleted some apps, photos and videos, and since then i've still got 0 bytes of capacity. But on itunes, it shows i still have 1,47gb. What can i do? PLEASE HELP ME!!!!

    Umm, You may still update your apps from App Store. But if you found there are errors for your system calculating memories, try to restore your iPod touch with the latest firmware.
    http://support.apple.com/kb/HT1414

  • Manually starting Intelligent Agent Configuration Assistant and HTTP Listener

    I have installed Oracle 9i on Solaris 8 and it stopped with an "Out of Memory" error during the Starter Database creation. I have fixed the memory problem and have now manually started the Database Configuration Assistant manually and managed to install a new database. Now I am trying to start the Intelligent Agent Configuration Assistant and the Apache HTTP Listener, but I cannot find out how to do this so that I can continue on with and complete the installation process from where I left off.
    Do anyone know how to do this? I would appreciate any help that anyone can give.
    Thanks
    Anthony

    Lets start with what product you are installing and why. An Oracle database installation, in and of itself, does not install an HTTP server.
    Of course one might also wonder why you are, just now, installing software so old it is in desupport.

  • HT5556 i was charge on my credit card on ipod when we program itunes gift card

    we purchase itune gift card for our chid to use but we was also charge on my credit card why was that

    Hi
    I just purchased my iMac and got contend code for free update for os xmoutain lion update. I create an apple ID with my credit card and try to apply code but I notice charge of $19.90 on my credit card. This is ridiculous. Please help to get refund for this money.
    Here are my details:
    Thanks
    <Edited By Host>

  • After change to Mavericks my Mac become too slow e I can't use it because stays asking passwords for "talagent" and "messages agent" as icloud keys. I got changed the icloud password many times and still doesn't work. I can't open any program.

    After change to Mavericks my Mac become too slow e I can't use it because stays asking passwords for "talagent" and "messages agent" as icloud keys. I got changed the icloud password many times and still doesn't work. I can't open any program.

    Back up all data.
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
    Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
    If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
    Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
    From the menu bar, select
    Keychain Access ▹ Preferences ▹ First Aid
    If the box marked Keep login keychain unlocked is not checked, check it.
    Select
    Keychain Access ▹ Keychain First Aid
    from the menu bar and repair the keychain. Quit Keychain Access.

Maybe you are looking for