Re: Alternative Solution for Field-Groups.

Dear Experts,
I have copied one program from older version system to new version system, in this program field groups are used.
In the new version i have to modify this program as per programming guide lines, so i used Code Inspector(SCI), so in Code Inspector check for field groups error is showing and this error message cannot be hidden using pseudo-comment.
So anyone could please suggest the alternative solution.
Below code is used in the program.
{FIELD-GROUPS: HEADER, ITEM.
INSERT T001-BUKRS MARA-MATNR INTO HEADER.
INSERT MAKT-MAKTX MARC-XCHAR T001-BUTXT T001W-NAME1VBBE-OMENG INTO ITEM.
other processing
EXTRACT ITEM.
other processing}

Hi Friends, I have a requirement as below Source NUM1 123456789 TARGETNUM1,2,3,46,7,8,9.... I WANT TO LOAD FIRST FOUR RECORDS FROM SOUCE INTO SINGLE RECORDS IN TARGET AND SO ON.. PLEASE PROVDE SOLUTION FOR ABOVE SCENARIOTHANKS IN ADVANCE

Similar Messages

Alternate solution for Field Exit

Hi All,
Is there any other way to get the functionality of Field Exit?
According to my requirement, I have to populate some values in a table control based on the value entered in a field.
Please tell me a solution for this.
Thanks,
Nandhu.

Hi,
As per your requirement you want to populate some values based on the value of some other field.
You can try for EXITS or if the field from which you want to use the value and the other fields which you want to populate are input fields then you can as well use field exits.
Variables declared globally for storing values in the top include of the function group for field exits can be accessed in other field exits. So you can make use of this functionality.
Thanks.

Having problems with audio jacks, connections are shorting. i need an alternative solution for mixing in logic

i am having problems with mac pros audio jacks,any alternative solutions ?

If you're mixing in Logic, buy a FireWire audio interface. So many people make them, that it isn't funny. Personally, I'm a fan of M-Audio interfaces for a cheap, high quality device.
Here's some FireWire interfaces, they also make USB products.
http://m-audio.com/index.php?do=products.family&ID=FWinterfaces

Best coverflow and missing feature alternative solutions for all platforms.

Personally for me coverflow was a important feature. Not JUST a feature but what really defined iTunes as BEING iTunes.
I would have actually loved if apple instead of removing it expanded on it and made it faster,better,stronger. With things like back label support so on and so forth.
I'd like the communities thoughts on some of the best alternatives for the missing coverflow & other features currently left out of iTunes 11 on both Mac and Windows.
Also, If there is a way to link(link up) any of those to iTunes 11 for track and volume control. Ideally for not just sending but also receiving track and volume input.
And whats the absolute BEST solution for each platform. I understand running iTunes 10.7 or 11 sandboxed or on another machine may also be an option.
So.. lets look at things like resource usage Vs usability...
For me CAD (CD Art Display) has always been helpful especially combined with raindrop even tho it doesn't have flow options for the most part on 99% of themes. It still makes my library pop.
Looks like there are 3 options for Mac
Steel Sky (SteelSkies)
Everplay
CoverStream
Its worth noting Everplay has Last.FM support. Not sure if that can be integrated into iTunes 11 somehow.
For windows the only thing i could find remotely like coverflow is a widget called XDeskCover
To mods:
Please stop deleting my posts. If you want to take the time to completely remove a feature from a program atleast let us explore some alternatives so we can continue actually using apple products.

another method suggested in these forums in the post "session manager stopped working with firefox 3" by Charles Anderson works for me and allows me to use my little X.
go to options -> General tab
under startup/when firefox starts -> change to something other than "show my windows and tabs from last time".
I've had this on show my homepage previous and it got changed somewhere and I think it was from an update or addon which is why a few others are having the same issue.

Alternative solution for IRM

hi Experts,
My customer is aware that IRM will not be developed further by oracle, here is the concern:
1.What is the reason for this?
2.What is the suggestion from oracle if customer need this kind of solution?
3.What the successive product could be, when it is planned to be available?
Best regards

You could store your secure data in session using a generated unique attribute key, then place the attribute key in a hidden field.

Alternative Solution for Form 16 with Digital Signature.

Dear All,
My Basis people have tried lot, but they have failed to set up ADS Server, for Digital Signature to be implemented for Form 16.
Can anyone, please provide me with any other solution to get Digital Signature implemented may be via some Z programs or Z customizations. Kindly help me out, as this is an important requirement from the board members of my client. If I fail on this, it would be having some serious repercussions.
Looking forward for an earnest reply. Please don't provide solutions related to SE78(Sapscript .jpg upload).
With Best Regards,
Mithilesh Kumar Singh

Form 16 Configuration for ESS - ERP Human Capital Management - SCN Wiki
1589254 - Form 16 central note for ADS configuration
see the PDF Form 16 (print preview) in PC00_M40_F16 transaction in ECC (R/3)

Is ther any alternative solution for music downloads other than iTunes

Plz suggest me if there is any other service out there that provides music download service other than iTunes.
One with DRM-Free & Monthly subscription would be awesome..!
Thanks in advance.

Okay, in removing duplicate posts, these got pulled. Here they are...
<hr width="95%">
StarDeb55 Posted: May 29, 2007 9:14 PM
Kirk, I'm almost certain that any Napster downloads have DRM on them. 2nd problem is that Napster doesn't work for a Mac.
The forums are having problems as you can see. When you post it is taking over 30 minutes to appear in the thread at the moment, so it's really not necessary to re-post.
<hr width="95%">
Kirk Boragine Posted: May 29, 2007 9:32 PM
StarDeb55
My mistake. I've been happily listening to their streams. The subscription service does not work for Macs, yet. Sorry to all for the post(s).
[ sorry about that, Nubz N.]
PM G5, PM G4, iPods Mac OS X (10.4.9) Mac OS 9.2.2

Need alternative solution for SAP Note, kindly do needful

Dear Consultants,
Our client is not able to apply SAP NOTE (SAP NOTE :- 1850965) for the issue (http://scn.sap.com/thread/3517341)due to some technical problem, kindly suggest if any other way is there to solve this issue, please do needful.
Thanks & Regards,
Navesh

Dear Consultants,
Please do needful, I need your help.
Thanks & Regards,
Navesh

Different field groups in the different account groups

Dear IT Experts,
I´m working on restructuring authorization in roles concerning the IC and TP customers.
The goal of this changes is be able to have different field groups in the different account groups (TP and IC), for give you some more detail a good example can be, the same AMS user should be able to change general data and sales views for TP customers but for IC he should only be allowed to change the sales views, however when the changes are made in the roles they are being ignored because as far as I could check the system does not have as a rule that the field groups are or can be dependent from the account group...
I can give you a clear example:
Role A
F_KNA1_AEN -> VGRUP = 10-16
F_KNA1_GRP -> ACTVT = 01, 02, 03
F_KNA1_GRP -> KTOKD = INTR
Role B
F_KNA1_AEN -> VGRUP = 16
F_KNA1_GRP -> ACTVT = 01, 02, 03
F_KNA1_GRP -> KTOKD = THIR
Despite it looks fine, the system is not validating the account group with the correspondent field group in each role, so the field groups that the system use is unique, it means it the content of the object F_KNA1_AEN in total independently of used account group!
So my question is, can we apply any other object that makes the field group being directly depending of the account group, as we can see for example activities for each account group having something similar for field group and account group?
Can someone please explain me step-by-step how I can do this work even if by another method?
I´m quite new on this issues and I really need your wisdom to find a solution for this.
Many thanks
Katjia

Hi Manoj
The debate is each inidividual business unit has defined different account groups for the same vendor in their respective systems.
The question is : What is the best practice-- Should we keep Vendor account group as main table field and define Vendors with one unique account groups OR we maintain the account group in qualified table each pointing to different business unit.
In my opinion this is going to be very complex solution. Ideally we need to define all the Harmonization rules before syndicating data to different target systems.
Is this possibel that the same vendor record which is existing as vendor of different account groups in different systems have same set of attributes. If yes then enabling the remote key for Account group Lookup field is one option and defining a unique Account group 'AG" (which is mapped to say AG1 from remote system1, AG2 from remote system2 and so on..)..
Managing this via Qualified table will be very complex and not advisabel. As Rajesh also mentioned Account Group in MDM should be considered as Global attribute and all such harmonization rules should be defined in your project. AG1=AG2=AG in above exmaple.
Hope this clarifies.
Thanks-Ravi

Standard FICA datasoources ate missing- Alternative solution

Hi All,
Our ISU system is in ECC6 with out any Ehp. CRM-2005 is connected with ISU system through middleware.
We are missing standard FICA BW datasources( 0FC_BP_ITEMS,0FC_DUN_HEADER,0FC_DUN_ITEMS) due to unavalability of Ehp in the ISU system.
If Ehp will be apply to ISU system, CRM system need to be upgraded to CRM7 which is not feasible in current time.
As per BW implementation we need to use these extractors which are based on important FICA tables.As the base table for these extractors will have huge volume of data(Utilities Industry).
Request you to help us the alternative solution for this without upgrading any Ehp in the ISU system. If we will create custom extractors performance issue may come.
I have refered the Blogs where performance issue is mentioned for custom extractor.
Regards,
Asish

You listed two of the best options possible...
1) Upgrade ECC to EHP2 and CRM to CRM 7.0.
2) Create generic DataSources from the source tables.
The only other option you would have is to create a remote-enabled FM in your source ECC environment to extract data out of the source table(s) and insert into an ITAB, create an ABAP program in your BW environment that calls the remote-enabled FM and receives the extracted data ITAB and then load that data into a custom table in BW. Then create a generic DataSource on that custom table in BW. Realize, this would pretty much be the same as creating a generic DataSource on the ECC environment, but would be more easily replaced when you do eventually update and potentailly move to the standard content DataSources.

HELP_START: how can i do a search help F4 same as field Group PLNNR in CA02

Hi all,
   I'm developing a report in which i use two field Group (PLNNR) and Group counter (PLNAL) as same as in CA02: choose a group by F4 and after these two fields are filled with the chosen values in help screen.
   My problem: i would like to do a search help for field Group (PLNNR) as same as in CA02. I have used the Function HELP_START for this purpose, but i can not reach my purpose: i choose a group in dialog help and after the field Group have the chosen value, but the field Group counter (PLNAL) don't have any value.
   I don't know which input values for structure HELP_INFOS will be get a result as same as in CA02?
   Anyone know how i should do to solve my problem, please help me?
Which input is incorrect (code below), please help me!
Thanks a lot in advance,
My Actual input for structure HELP_INFOS as below:
ls_help-call      = 'V'.
ls_help-tabname   = 'RC271'.
ls_help-fieldname = 'PLNNR'.
ls_help-spras     = sy-langu.
ls_help-docuid    = 'FE'.
ls_help-object    = 'F'.
ls_help-dynpprog = sy-repid.
ls_help-report    = sy-repid.
ls_help-dynpro    = sy-dynnr.
ls_help-pfkey     = 'NXD'.
ls_help-dynprofld = 'P_PLNNR'. (My fiel 'Group' in Selection screen)
ls_help-MENUFUNCT = 'HC'.
ls_help-fieldlng = '8'.
ls_help-pov = 'N'.
ls_help-curow = sy-cucol.
ls_help-cucol = sy-curow.
ls_help-selectart = 'A'.
CALL FUNCTION 'HELP_START'
       EXPORTING
            help_infos   = ls_help
       IMPORTING
            select_value = lv_select_value
       TABLES
            dynpselect   = wt_dselc
            dynpvaluetab = wt_dval.
Thanks,
Vinh Vo

Why do it in more complicated way, while the simplest method is available. You can use :
PARAMETERS: p_plnnr LIKE rc271-plnnr.
PARAMETERS: p_plnal LIKE rc271-plnal.
Give it a try.
Thanks & regards,
Hadiman

How to get change log for fields if change document flag is not maintained?

Hi experts,
My requirement is display the change log details for the transaction FAGLGA32.
In this transaction we have the Field Groups block.if any change is happened for field group we need to capture the change.
the field for the field group is RKAL1-FGFLG1 and the data element is FGFLG.
In the data element FGFLG, the flag CHANGE DOCUMENT is not maintained.
How to get the change log details for the fields for which the change document flag is not maintained at data element level?
Regards,
Ramesh

do a modification for the data element or try Audit Trail (depends on your release)
    Audit Trail (electronic records) / Tx AUT10, AUT01, XX-PROJ-ELR, OSS 564743,517613,564645
        Note 1058984 - FAQ: Audit Trail (Transactions AUT01-AUT10)
        http://help.sap.com/erp2005_ehp_03/helpdata/DE/fc/89683c1b5fb712e10000000a114084/frameset.htm
cheers
carsten

BI 7.0 Security: Replace SAP_ALL with alternative solution

Hello,
In an effort to remove SAP_ALL from user accounts in BI 7.0, I need to find an alternative solution for allowing users to create, execute, and delete BEx queries. Initially, I was thinking of creating two roles, derived from the SAP_ALL template. One role would allow users to create, execute, and delete queries; the other role would allow users to only execute BEx queries. Since I'm new to BI 7.0, I'm not quite sure if this is the best approach. If someone has experience with this scenario, please advise.
Thank you in advance.

Hi Cedric,
You definitely need to move away from SAP_ALL in BI 7.0. The blog mentioned explains how the new features of BI 7.0 work, but I feel your issue is a bit more fundamental. Do you have a security strategy / design for your BI reports that you are trying to deploy?
You need to consider who can access what data in BI as well as which sets of queries. Once you have an idea for that if you look at how the S_RS_COMP authorisation object works, implementing roles with restrictions on that object will achieve restrictions on which users can access which queries.
There are SAP delivered templates for query execution roles, that you can look at to get you a starting point - but you'll still need to having a good naming convention for queries as well as an understanding of where your BI data is stored, to be able to restrict access.
Once you've considered the data and reports, you may need to further restrict information by the use of analysis authorisations on specific characteristics, which is where the blog will help you.

Want robust solution for alternating row color, resetting every group

I would like a solution for displaying an alternating row color for my detail rows that resets every group, so that row 1 is always gray.
Our Crystal designer provided this code to me:
@rowcnt formula, suppressed, placed in Detail row:
Shared numbervar rowcnt;
rowcnt := rowcnt + 1;
@resetrowcnt, suppressed, placed in Group row:
Shared numbervar rowcnt;
rowcnt := 0;
Formatting formula, placed in Color in Detail > Section Expert:
Shared numbervar rowcnt;
if Remainder(rowcnt, 2) <> 0 then
color(241,241,241)
else
crWhite
This was working fine for me.
However, it is suddenly not working in one of my reports.
The report does happen to have two groups (rowcount.png).
When the report is run, all rows are colored (rowcount02.png).
This report was previously working fine! I'm not sure what changed.
In any case... surely there must be standard code to do this very standard formatting.
I would be very grateful if someone could post some robust code to accomplish the following:
REPORT DATA IN DETAIL ROW, ALTERNATE ROW BANDING:
- Data in Detail row displays alternating row colors
- Odd rows are always shaded, even rows not
- Banding resets every group / does not continue pattern from previous group
REPORT DATA IN GROUP ROW, ALTERNATE ROW BANDING:
Some of our reports place row data in a group row (just the way it happened).
If you could also modify your code in this case.
Thank you!

Hi Abhilash/Sastry, since I'm going to switch to Sastry's formulas, could you please confirm correctness of the following. I can't actually run this report, I can only provide it to our London office, bit of a lag for testing.
@resetrowcnt:
Whileprintingrecords;
Numbervar cnt:=0;
@rowcnt:
Whileprintingrecords;
if {HedgeDetails.StrategyID} <> previous({HedgeDetails.StrategyID}) and
{HedgeDetails.DealID} <> previous({HedgeDetails.DealID}) then
Numbervar cnt:=cnt+1;
Details section (Suppress):
not(OnFirstRecord) and
{HedgeDetails.StrategyID}=previous({HedgeDetails.StrategyID}) and
{HedgeDetails.DealID}=previous({HedgeDetails.DealID})
Please note: Suppress checkbox is selected AND the above formula is entered.
Details section (Color):
Whileprintingrecords;
Numbervar cnt;
if cnt mod 2 <> 0 Then color(241,241,241) else crwhite

Group & alternative account number field

hi,
1) i do not see group account number field in FS00, FSS0 or FS01/02/03 but i can see alternative account no. i know this alternative acc no is meant for country specific.
why i cannot see this group acc number field?
2) why i do not see country specific account show in alternative acc no? for example in obd4, there is sales acc and also local gaap sales account. when i disply operating sales acc, i do not see local gaap sales acc show in alternative acc number field.
thanks

hi,
thanks alot. point given.
1) may i know if local gaap account also in the same coa just like operating coa, then do we need to assign this local gaap account in alternative acc number field?
2) why in the same coa, there have more than 1 type? operating gl acc, local gaap gl acc and also ifrs gl account.
3) how do i know which account to post to as all of them in the same chart of acc?
thanks

Re: Alternative Solution for Field-Groups.

Similar Messages

Maybe you are looking for