Re : Apple TV doesn't connect to a Wi-Fi Broadband Internet Service using Airport Extreme

Hi, using Airport Extreme (Airport Utility version 6.3.2, Internet :DHCP, Router mode : Off (Bridge)) with a Wi-Fi Broadband Internet service. My Desktop (iMac), Macbook,iPhone,iPad join the Airport Extreme Wirelessi network (WPA/WPA2 Personal) easily and Broadband ISP Login-page pops up with username & password options. However, in case of Apple TV (2nd Generation Software : 6.0.2 (6646.81.1)), it connects the Airport Extreme W-Fi network easily but no Broadband ISP Login-page pops up with username & password options. Even using the Ethernet connection of the said Wi-Fi Broadband Internet Service directly to the Apple TV, no internet network connects. Please help.

There is no way you can handle login details with the ATV and there is probably no way you can do it with extreme in router mode either.. If you need to use a login name and password via a html screen then that is impossible in a device without html.
But your newest addition confuses me.
A slight correction in the question : the Broadband Internet Service isn't Wireless, but having Ethernet connection to the Airport Extreme.
So how do your iphones pop up a login page.
easily and Broadband ISP Login-page pops up with username & password options.
The alternative method is to use a computer .. login to your service and use ICS through the computer to the ATV..
See http://www.youtube.com/watch?v=0jJe_BkQMRc
Or any site that shows how to route internet through a computer.

Similar Messages

Connect a PC to My existing Wireless Network Using Airport Extreme

this is my issue i bought a Airport Express to connect a PC via ethernet to my wireless network already working at home. Cant figure out the settings???? need help. My home network is using a airport extreme base station. the problem is the PC doesn't have wireless capability so i connected the PC to the airport extreme in order to connect to the network, but no luck so far.

Hello Sailor25. Welcome to the Apple Discussions!
What you need to do is configure the AirPort Express Base Station (AX) as a ProxySTA.
To activate ProxySTA, you must set up the Express to join a wireless network and then enable the Allow Ethernet Clients setting; both settings are located in the Wireless tab of AirPort Utility. The feature should work with any wireless network: a, b, g, or n; and 5GHz or 2.4GHz. (Note that the Express, which ships with firmware 7.3, must also be updated to firmware 7.3.1 for this feature to appear.)

How to connect to a Wireless HP Printer WPS Pin using Airport Extreme

I cannot figure out how to connect my Wireless HP Printer that uses a WPS Pin to my netword that has a Airport Extreme router?

http://h10025.www1.hp.com/ewfrf/wc/documentSubCategory?tmp_task=setupCategory&cc =us&dlc=en&lc=en&product=5109847 may help you.

My westel modem (that I rent from my phone provider) quit working with the internet. My airport extreme seems to be working from the dsl (phone) connection through the westel, then through the ethernet cabled to the airport extreme. Do I need the modem?

My westel modem (that I rent from my phone provider) quit working with the internet. My airport extreme seems to be working from the dsl (phone) connection through the westel, then through the ethernet cabled to the airport extreme. Do I need the modem? Is the ethernet route less efficent that going throught the internet connection? If I don't need the westel modem; how do I make the dsl conection to the pone port in the wall? Thanks for help on this!

Ok, so are you saying that your Internet is or isn't working? Does it work if you plug your computer directly into your computer and bypass the router (make sure you power cycle the modem when you do this)? If it is working this way, then a new modem isn't going to solve a problem with your Internet not working. If it is going slow (try running a speedtest) then you need to call your phone company to have them take a look at why your Internet is slow. If it runs fine this way and then slows back down when you go back through your router there is something else going on. Try unplugging both the modem and the router, let the modem fully sign back in and connect to the Internet, after it gets signed in, plug your router in, and then after it boots up fully, try running the speedtest again...See if that helps any? Sometimes it's just an IP conflict that happens when the dynamic IP that is assigned by your Internet Service Provider changes and the change doesn't flow smoothly.

My iMac is able to use my wireless internet from my airport extreme, however, no other devices(iphone, ipod) will connect. The network shows up, but the indicator just spins without ever joining.

My iMac is able to use my wireless internet from my airport extreme, however, no other devices(iphone, ipod) will connect. The network shows up, but the indicator just spins without ever joining.
I have tried resetting my airport extreme, creating a new network, etc nothing seems to work.

I have a feeling you may be stuck in bridge mode there...
Factory reset the Extreme (so we don't second guess later), and re-set up the extreme using iOS5 on your iPhone.
Set up your Wi-Fi network with your iPad, iPhone, iPod touch, or Mac.
http://www.apple.com/airportexpress/features/easy-setup.html

How do I use AirPort Extreme to be able print from my MacBook Pro AND a PC. If I connect printer into AirPort, I can only print on laptop. If printer is connected to PC hard drive, I can only print on desk top. How do I configure this to make both print?

How do I use AirPort Extreme to be able print from my MacBook Pro AND a PC. If I connect printer into AirPort, I can only print on laptop. If printer is connected to PC hard drive, I can only print on desk top. How do I configure this to make both print?

If you have not already done so, your chances will really improve if you....
1) Connect the printer to the USB port on the AirPort Extreme
2) Download and install Bonjour Print Services for Windows on the PC

Why can't I no longer connect to the Internet via my AirPort Extreme Base?

I suddenly can no longer connect to the Internet through my AirPort Extreme. Everything was fine until this morning. My Base Station is connected to a DSL modem and then my computer connects to the Internet wirelessly through the Base Station. The center light is on in the Base Station. The left light flickers telling me there is wireless activity. I can still access my printer through the Base Station. But the right light is no longer flickering. I have rebooted everything several times. Does anyone have insight into this problem. This is the second time this has happened. For over a month I could not access the Internet through the Base Station, and then suddenly and arbitrarily it started working again. This morning it just stopped again.

I've had the same problem - mine started after I upgraded to 10.4.8 on my MacBook a week or so ago.
I can see other networks around my home and when I travel, but can only connect via ethernet cable (and my ISP is comcast - I thought the upgrade was supposed to help make connecting with comcast better).
My G3 has no problem connecting, so I don't think it's exactly a problem with my modem, or base station, or even comcast. I think it has something to do with my base station and upgrading to 10.4.8. Btw, dropping back to 10.4.6 hasn't helped.

How do I connect a 1 T time capsule to a new airport extreme so I can use it with time machine?

How do I connect a 1 T time capsule to a new airport extreme so I can use it with time machine?

Bridge the TC.. plug it into the AEBS with ethernet.

I currently use Airport Extreme Wanting to extend using another apple airport express

How to set up Airport Express when already using Airport Extreme to extend range.

Extending the range of an 802.11n network
AirPort Utility makes it simple to extend the range of an 802.11n network if you are connecting another 802.11n base station. Connecting two 802.11n AirPort Extreme Base Stations greatly simplifies the WDS setup process.
To extend the range of an 802.11n network:
Open AirPort Utility and select the base station that will connect to the Internet.
Choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary.
Click AirPort in the toolbar, and then click Wireless.
Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then select the “Allow this network to be extended” checkbox.
Next, select the base station that will extend this network, and choose Manual Setup from the Base Station menu, or double-click the base station to open its configuration in a separate window. Enter the base station password if necessary.
Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then choose the network you want to extend from the Network Name pop-up menu.
Enter the network name and wireless password if necessary.
Click Update to update the base station with new network settings.

Apple TV doesn't connect with sony bravia KDL-40NX720 TV

I'd like to connect my apple TV (bought yesterday) to my Sony bravia KDL-40NX720.
I connect the Apple TV with the HDMI cable but it doesn't connect to the Sony.
What can I try?

Do you have a 2nd or third gen Apple TV? The problem may be you have 3rd Gen which requires a 1080i supporting TV and I am assuming the 720 at the end of your model number means it is a 720i TV. That would support 2 Gen apple TV but not 3rd. Is that possibly the problem?
Check which ATV you have and the tech spec of the TV. If I am wrong please post again so we can look at other issues.
Hope I am wrong by the way!
Jules

HP Deskjet 3550 cannot print using Airport Extreme via USB connection on Windows 7 64 bits

Product Name and Number: HP Deskjet 3550 Inkjet Printer
Operating System installed: Windows 7 Home Premium 64 bits
Error message: None
Any changes made to your system before the issue occurred: Setting up HP printer using Airport Utility to add a new printer and installed Bonjour Print Wizard.
Problem: My printer is already set up using Airport Utility. When I print something, the printer doesn't do anything. Is there something I haven't done lately in order to get this printer working using my wifi router?
Suggestion #1: Are the print jobs getting stuck in the print queue? You can check this by clicking on the printer icon in your task tray by the clock.
Error Message #1: Yes, the print job got stuck in the print queue, but the moment, it disappeared from the print queue and the printer doesn't print at all. This is frustrating.
Suggestion #2: Does the printer work as expected if you connect it directly to the PC via USB?
Error Message #2: Yes, the printer works if I connect it directly to my PC via USB, but I don't understand why it wouldn't work with the wifi router, though.
Suggestion #3: This has to do with the way the router handles the connection to the printer. I found another thread, regarding this issue, and it has some information that may help resolve it.
http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Print-Problem-Using -USB-Printer-on-Airp...
If that does not help, I would recommend posting on the Apple forums, as they may have more expertise with the router's abilities:
https://discussions.apple.com/community/wireless/airport
Error Message #3: After clicking on the first link that you posted, it was very helpful, but the printer couldn't print completely and somehow it would stop at the quarter of a paper. It looks incomplete when I took it out from my printer. It does that every time.

UPDATE!
Problem solved! So this is just a followup in case someone else ever stumbles into these boards with the same or similar problems as mine, that is, trying to run an HP Deskjet D1500 series printer [mine's a D1520] on an Airport Extreme wifi router's USB port as a network printer [with the Airport Extreme controlled by an ancient G4 PowerMac Quicksilver currently running OS X 10.4.11).
Although it probably SHOULDN'T matter, since this type of printer works fine with just the Tricolor cartridge as shipped when hooked up directly to a computer's USB port, on a hunch I got a black HP cartridge (that's a type 21, not type 22 as I had earlier said), slapped it in, tried a test page, and all's well. So, we can call off the technoid hounds. Everything running perfectly.
I hope this message in a bottle may help someone else out there some day soon who may be scratching his or her head with a similar stumper. And just to recap those important Windows printer settings, they are:
* [Printer Properties--> Ports--> Add New Port...] "Standard TCP/IP Port"
* [Configure Port] IP Address "10.0.1.1" and Port "9100"
Best of luck!
Bilgey

How can I create my own network in my dorm? (Using Airport Extreme + ethernet cable) (To connect AppleTV and Sonos successfully with no restrictions)

So I recently set up my Apple Airport Extreme Router in my dorm and have a BIG problem. It works and lets me do most things on my own network, but when I try doing things on my external devices connected to the network (Apple TV and Sonos Hi-Fi Sound system) the connection just doesn't go through. I'll give two examples.
After setting up my Sonos system successfully, I was prompted to update the software so I can use options that need internet access such as pandora and soundcloud. It just didn't work at all. It gave me an error that had to do with internet connection. I tried numerous times.
On Apple TV, I used AirPlay on my phone to mirror what I was seeing on my phone and then tried to play youtube, soundcloud, and other music apps and none of them worked.
My guess is that it has something to do with my school's restrictions on streaming or downloading. But none of this stuff is actually restricted so I know it must be due to the transfer of information between my network (which is connected to the school's network I am assuming, since my ethernet port is in my dorm wall) and my external devices.
Honestly I'll probably get the "Your school has these restrictions answer", but I know there is a way to fix this and I really want the answer!!
Thanks,
Andres

You don't need the AirPort Express to do this.
You can set your Mac to share it's wired connection over the wireless port and the iTouch can connect directly to the Mac.
You could also do it with the AirPort Express, but you don't need to - it's overkill for what you've described.

Connection to internet via ADSL with password login - using airport extreme

my connection to internet is via ADSL with account name and password login. i was able to set up the PPPoE settings of my new macbook properly to connect to the internet via an Ethernet cable. however, when i was trying to set up the airport extreme base station, the amber light was on all the time and has been giving me the error message "no connection to internet" - can someone pls help?
thanks
macbook Mac OS X (10.4.9) new to mac and airport extreme base station
macbook Mac OS X (10.4.9)

btam, Welcome to the discussion area!
The first thing to do is DISABLE PPPoE on your Mac. Since your AirPort Extreme base station (AEBS) will be handling PPPoE, your Mac doesn't need to do it.
Next configure the AEBS to connect to your ISP using PPPoE. You can see where to enter the PPPoE information by looking at Page 33 in the "Designing AirPort Networks" (http://manuals.info.apple.com/en/DesigningAirPortNetworks.pdf).

Can i use airport extreme, with apple tv and pc without the internet

While renting/buying films on itunes is all well and good, my wireless capacity is poor, if i buy airport extreme, without connecting it to the internet, will it stream my films on itunes from the PC to apple TV?

...if i buy airport extreme, without connecting it to the internet, will it stream my films on itunes from the PC to apple TV?
Yes. An Internet connection is not required. However, of course, the AirPort or your Apple TV will not be able to stream content from the Internet.

Can't connect to wireless internet with my airport extreme card.

hello, i need some help connecting to our wireless router. i do not have an airport base station, i am trying to connect to a third-party, secure wireless network. anyway, i've called apple, i've called linksys (the router company), and i am still using hardwire connected to the router. whenever i click the airport icon on the top taskbar, no networks show up. i have had my pc laptop in the same room as my iMac G5, and the laptop can autmatically connect to the network, but my iMac cannot. i am running out of options. i connect with a secure, wireless internet. its wep, whatever that means, and i've tried my user name and passcode numerous times, but to no avail. what do i do????

thanks for your help, but sadly this did not work. even when i click the wireless airport icon on the top taskbar, no networks show up on the pull down menu. the only option i have is 'other.' shouldn't my secured network at least show up in the pull down menu, to which i provide the password?
is there any way to get this extreme card to work? has anyone else had this same problem with their iMac G5? this is ridiculous, thanks.

Re : Apple TV doesn't connect to a Wi-Fi Broadband Internet Service using Airport Extreme

Similar Messages

Maybe you are looking for